Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

5 files changed, 56 insertions, 163 deletions

diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 8533bf04284a..9fde873f5889 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -131,6 +131,7 @@ static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
 static int otg_mode_host;
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f85c8da17e8b..d547036aff3f 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -375,6 +375,31 @@ static void __init am3517_evm_init_irq(void)
 	omap_gpio_init();
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type         = MUSB_INTERFACE_ULPI,
+	.mode                   = MUSB_OTG,
+	.power                  = 500,
+};
+
+static __init void am3517_evm_musb_init(void)
+{
+	u32 devconf2;
+
+	/*
+	 * Set up USB clock/mode in the DEVCONF2 register.
+	 */
+	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+	/* USB2.0 PHY reference clock is 13 MHz */
+	devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
+	devconf2 |=  CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
+			| CONF2_DATPOL;
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+	usb_musb_init(&musb_board_data);
+}
+
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -393,6 +418,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* USB OTG DRVVBUS offset = 0x212 */
+	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -459,6 +486,9 @@ static void __init am3517_evm_init(void)
 				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
 	/*Ethernet*/
 	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
+
+	/* MUSB */
+	am3517_evm_musb_init();
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 33a5cde1c227..72605584bfff 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,6 +28,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/am35xx.h>
 #include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
@@ -89,6 +90,9 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
 	if (cpu_is_omap243x()) {
 		musb_resources[0].start = OMAP243X_HS_BASE;
+	} else if (cpu_is_omap3517() || cpu_is_omap3505()) {
+		musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
+		musb_resources[1].start = INT_35XX_USBOTG_IRQ;
 	} else if (cpu_is_omap34xx()) {
 		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
 	} else if (cpu_is_omap44xx()) {
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 2a9427c8cc48..9feddacfe850 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -218,6 +218,27 @@ static inline omap2_usbfs_init(struct omap_usb_config *pdata)
 #	define	USBT2TLL5PI		(1 << 17)
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
 
 #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
 u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 6c67d9ebf166..19e5015e039b 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -209,169 +209,6 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
-{
-	if (!phy_type)
-		return FSL_USB2_PHY_NONE;
-	if (!strcasecmp(phy_type, "ulpi"))
-		return FSL_USB2_PHY_ULPI;
-	if (!strcasecmp(phy_type, "utmi"))
-		return FSL_USB2_PHY_UTMI;
-	if (!strcasecmp(phy_type, "utmi_wide"))
-		return FSL_USB2_PHY_UTMI_WIDE;
-	if (!strcasecmp(phy_type, "serial"))
-		return FSL_USB2_PHY_SERIAL;
-
-	return FSL_USB2_PHY_NONE;
-}
-
-static int __init fsl_usb_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i = 0;
-	struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
-		*usb_dev_dr_client = NULL;
-	int ret;
-
-	for_each_compatible_node(np, NULL, "fsl-usb2-mph") {
-		struct resource r[2];
-		struct fsl_usb2_platform_data usb_data;
-		const unsigned char *prop = NULL;
-
-		memset(&r, 0, sizeof(r));
-		memset(&usb_data, 0, sizeof(usb_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		usb_dev_mph =
-		    platform_device_register_simple("fsl-ehci", i, r, 2);
-		if (IS_ERR(usb_dev_mph)) {
-			ret = PTR_ERR(usb_dev_mph);
-			goto err;
-		}
-
-		usb_dev_mph->dev.coherent_dma_mask = 0xffffffffUL;
-		usb_dev_mph->dev.dma_mask = &usb_dev_mph->dev.coherent_dma_mask;
-
-		usb_data.operating_mode = FSL_USB2_MPH_HOST;
-
-		prop = of_get_property(np, "port0", NULL);
-		if (prop)
-			usb_data.port_enables |= FSL_USB2_PORT0_ENABLED;
-
-		prop = of_get_property(np, "port1", NULL);
-		if (prop)
-			usb_data.port_enables |= FSL_USB2_PORT1_ENABLED;
-
-		prop = of_get_property(np, "phy_type", NULL);
-		usb_data.phy_mode = determine_usb_phy(prop);
-
-		ret =
-		    platform_device_add_data(usb_dev_mph, &usb_data,
-					     sizeof(struct
-						    fsl_usb2_platform_data));
-		if (ret)
-			goto unreg_mph;
-		i++;
-	}
-
-	for_each_compatible_node(np, NULL, "fsl-usb2-dr") {
-		struct resource r[2];
-		struct fsl_usb2_platform_data usb_data;
-		const unsigned char *prop = NULL;
-
-		if (!of_device_is_available(np))
-			continue;
-
-		memset(&r, 0, sizeof(r));
-		memset(&usb_data, 0, sizeof(usb_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto unreg_mph;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		prop = of_get_property(np, "dr_mode", NULL);
-
-		if (!prop || !strcmp(prop, "host")) {
-			usb_data.operating_mode = FSL_USB2_DR_HOST;
-			usb_dev_dr_host = platform_device_register_simple(
-					"fsl-ehci", i, r, 2);
-			if (IS_ERR(usb_dev_dr_host)) {
-				ret = PTR_ERR(usb_dev_dr_host);
-				goto err;
-			}
-		} else if (prop && !strcmp(prop, "peripheral")) {
-			usb_data.operating_mode = FSL_USB2_DR_DEVICE;
-			usb_dev_dr_client = platform_device_register_simple(
-					"fsl-usb2-udc", i, r, 2);
-			if (IS_ERR(usb_dev_dr_client)) {
-				ret = PTR_ERR(usb_dev_dr_client);
-				goto err;
-			}
-		} else if (prop && !strcmp(prop, "otg")) {
-			usb_data.operating_mode = FSL_USB2_DR_OTG;
-			usb_dev_dr_host = platform_device_register_simple(
-					"fsl-ehci", i, r, 2);
-			if (IS_ERR(usb_dev_dr_host)) {
-				ret = PTR_ERR(usb_dev_dr_host);
-				goto err;
-			}
-			usb_dev_dr_client = platform_device_register_simple(
-					"fsl-usb2-udc", i, r, 2);
-			if (IS_ERR(usb_dev_dr_client)) {
-				ret = PTR_ERR(usb_dev_dr_client);
-				goto err;
-			}
-		} else {
-			ret = -EINVAL;
-			goto err;
-		}
-
-		prop = of_get_property(np, "phy_type", NULL);
-		usb_data.phy_mode = determine_usb_phy(prop);
-
-		if (usb_dev_dr_host) {
-			usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL;
-			usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host->
-				dev.coherent_dma_mask;
-			if ((ret = platform_device_add_data(usb_dev_dr_host,
-						&usb_data, sizeof(struct
-						fsl_usb2_platform_data))))
-				goto unreg_dr;
-		}
-		if (usb_dev_dr_client) {
-			usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL;
-			usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client->
-				dev.coherent_dma_mask;
-			if ((ret = platform_device_add_data(usb_dev_dr_client,
-						&usb_data, sizeof(struct
-						fsl_usb2_platform_data))))
-				goto unreg_dr;
-		}
-		i++;
-	}
-	return 0;
-
-unreg_dr:
-	if (usb_dev_dr_host)
-		platform_device_unregister(usb_dev_dr_host);
-	if (usb_dev_dr_client)
-		platform_device_unregister(usb_dev_dr_client);
-unreg_mph:
-	if (usb_dev_mph)
-		platform_device_unregister(usb_dev_mph);
-err:
-	return ret;
-}
-
-arch_initcall(fsl_usb_of_init);
-
 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static __be32 __iomem *rstcr;