diff options
| author | David Mosberger-Tang <davidm@egauge.net> | 2021-12-22 00:25:34 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@kernel.org> | 2021-12-22 20:51:18 +0300 |
| commit | ec031ac4792c72d9e925313366df8064e092f685 (patch) | |
| tree | 481b7002423b51a47ee7d1e5356ab1ca12876bbf /certs | |
| parent | 4d2cd7b06ce0d539b70619f7662fa67508d9008a (diff) | |
| download | linux-ec031ac4792c72d9e925313366df8064e092f685.tar.xz | |
wilc1000: Add reset/enable GPIO support to SPI driver
For the SDIO driver, the RESET/ENABLE pins of WILC1000 are controlled
through the SDIO power sequence driver. This commit adds analogous
support for the SPI driver. Specifically, during initialization, the
chip will be ENABLEd and taken out of RESET and during
deinitialization, the chip will be placed back into RESET and disabled
(both to reduce power consumption and to ensure the WiFi radio is
off).
Both RESET and ENABLE GPIOs are optional. However, if the ENABLE GPIO
is specified, then the RESET GPIO should normally also be specified as
otherwise there is no way to ensure proper timing of the ENABLE/RESET
sequence.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211221212531.4011609-2-davidm@egauge.net
Diffstat (limited to 'certs')
0 files changed, 0 insertions, 0 deletions