summaryrefslogtreecommitdiff
path: root/drivers/acorn
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/acorn
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/acorn')
-rw-r--r--drivers/acorn/README1
-rw-r--r--drivers/acorn/block/Kconfig36
-rw-r--r--drivers/acorn/block/Makefile9
-rw-r--r--drivers/acorn/block/fd1772.c1609
-rw-r--r--drivers/acorn/block/fd1772dma.S100
-rw-r--r--drivers/acorn/block/mfm.S162
-rw-r--r--drivers/acorn/block/mfmhd.c1416
-rw-r--r--drivers/acorn/char/Makefile6
-rw-r--r--drivers/acorn/char/defkeymap-l7200.c386
-rw-r--r--drivers/acorn/char/i2c.c369
-rw-r--r--drivers/acorn/char/pcf8583.c239
-rw-r--r--drivers/acorn/char/pcf8583.h41
12 files changed, 4374 insertions, 0 deletions
diff --git a/drivers/acorn/README b/drivers/acorn/README
new file mode 100644
index 000000000000..d399c09ca61c
--- /dev/null
+++ b/drivers/acorn/README
@@ -0,0 +1 @@
+Drivers for the ACORN "podule" ARM specific bus.
diff --git a/drivers/acorn/block/Kconfig b/drivers/acorn/block/Kconfig
new file mode 100644
index 000000000000..073add35e66f
--- /dev/null
+++ b/drivers/acorn/block/Kconfig
@@ -0,0 +1,36 @@
+#
+# Block device driver configuration
+#
+
+menu "Acorn-specific block devices"
+ depends on ARCH_ACORN
+
+config BLK_DEV_FD1772
+ tristate "Old Archimedes floppy (1772) support"
+ depends on ARCH_ARC || ARCH_A5K
+ help
+ Support the floppy drive on the Acorn Archimedes (A300, A4x0, A540,
+ R140 and R260) series of computers; it supports only 720K floppies
+ at the moment. If you don't have one of these machines just answer
+ N.
+
+config BLK_DEV_MFM
+ tristate "MFM harddisk support"
+ depends on ARCH_ARC || ARCH_A5K
+ help
+ Support the MFM hard drives on the Acorn Archimedes both
+ on-board the A4x0 motherboards and via the Acorn MFM podules.
+ Drives up to 64MB are supported. If you haven't got one of these
+ machines or drives just say N.
+
+config BLK_DEV_MFM_AUTODETECT
+ bool "Autodetect hard drive geometry"
+ depends on BLK_DEV_MFM
+ help
+ If you answer Y, the MFM code will attempt to automatically detect
+ the cylinders/heads/sectors count on your hard drive. WARNING: This
+ sometimes doesn't work and it also does some dodgy stuff which
+ potentially might damage your drive.
+
+endmenu
+
diff --git a/drivers/acorn/block/Makefile b/drivers/acorn/block/Makefile
new file mode 100644
index 000000000000..38a9afe8e03f
--- /dev/null
+++ b/drivers/acorn/block/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Acorn block device drivers.
+#
+
+fd1772_mod-objs := fd1772.o fd1772dma.o
+mfmhd_mod-objs := mfmhd.o mfm.o
+
+obj-$(CONFIG_BLK_DEV_FD1772) += fd1772_mod.o
+obj-$(CONFIG_BLK_DEV_MFM) += mfmhd_mod.o
diff --git a/drivers/acorn/block/fd1772.c b/drivers/acorn/block/fd1772.c
new file mode 100644
index 000000000000..3cd2e968e96c
--- /dev/null
+++ b/drivers/acorn/block/fd1772.c
@@ -0,0 +1,1609 @@
+/*
+ * linux/kernel/arch/arm/drivers/block/fd1772.c
+ * Based on ataflop.c in the m68k Linux
+ * Copyright (C) 1993 Greg Harp
+ * Atari Support by Bjoern Brauel, Roman Hodek
+ * Archimedes Support by Dave Gilbert (linux@treblig.org)
+ *
+ * Big cleanup Sep 11..14 1994 Roman Hodek:
+ * - Driver now works interrupt driven
+ * - Support for two drives; should work, but I cannot test that :-(
+ * - Reading is done in whole tracks and buffered to speed up things
+ * - Disk change detection and drive deselecting after motor-off
+ * similar to TOS
+ * - Autodetection of disk format (DD/HD); untested yet, because I
+ * don't have an HD drive :-(
+ *
+ * Fixes Nov 13 1994 Martin Schaller:
+ * - Autodetection works now
+ * - Support for 5 1/4" disks
+ * - Removed drive type (unknown on atari)
+ * - Do seeks with 8 Mhz
+ *
+ * Changes by Andreas Schwab:
+ * - After errors in multiple read mode try again reading single sectors
+ * (Feb 1995):
+ * - Clean up error handling
+ * - Set blk_size for proper size checking
+ * - Initialize track register when testing presence of floppy
+ * - Implement some ioctl's
+ *
+ * Changes by Torsten Lang:
+ * - When probing the floppies we should add the FDC1772CMDADD_H flag since
+ * the FDC1772 will otherwise wait forever when no disk is inserted...
+ *
+ * Things left to do:
+ * - Formatting
+ * - Maybe a better strategy for disk change detection (does anyone
+ * know one?)
+ * - There are some strange problems left: The strangest one is
+ * that, at least on my TT (4+4MB), the first 2 Bytes of the last
+ * page of the TT-Ram (!) change their contents (some bits get
+ * set) while a floppy DMA is going on. But there are no accesses
+ * to these memory locations from the kernel... (I tested that by
+ * making the page read-only). I cannot explain what's going on...
+ * - Sometimes the drive-change-detection stops to work. The
+ * function is still called, but the WP bit always reads as 0...
+ * Maybe a problem with the status reg mode or a timing problem.
+ * Note 10/12/94: The change detection now seems to work reliably.
+ * There is no proof, but I've seen no hang for a long time...
+ *
+ * ARCHIMEDES changes: (gilbertd@cs.man.ac.uk)
+ * 26/12/95 - Changed all names starting with FDC to FDC1772
+ * Removed all references to clock speed of FDC - we're stuck with 8MHz
+ * Modified disk_type structure to remove HD formats
+ *
+ * 7/ 1/96 - Wrote FIQ code, removed most remaining atariisms
+ *
+ * 13/ 1/96 - Well I think its read a single sector; but there is a problem
+ * fd_rwsec_done which is called in FIQ mode starts another transfer
+ * off (in fd_rwsec) while still in FIQ mode. Because its still in
+ * FIQ mode it can't service the DMA and loses data. So need to
+ * heavily restructure.
+ * 14/ 1/96 - Found that the definitions of the register numbers of the
+ * FDC were multiplied by 2 in the header for the 16bit words
+ * of the atari so half the writes were going in the wrong place.
+ * Also realised that the FIQ entry didn't make any attempt to
+ * preserve registers or return correctly; now in assembler.
+ *
+ * 11/ 2/96 - Hmm - doesn't work on real machine. Auto detect doesn't
+ * and hacking that past seems to wait forever - check motor
+ * being turned on.
+ *
+ * 17/ 2/96 - still having problems - forcing track to -1 when selecting
+ * new drives seems to allow it to read first few sectors
+ * but then we get solid hangs at apparently random places
+ * which change depending what is happening.
+ *
+ * 9/ 3/96 - Fiddled a lot of stuff around to move to kernel 1.3.35
+ * A lot of fiddling in DMA stuff. Having problems with it
+ * constnatly thinking its timeing out. Ah - its timeout
+ * was set to (6*HZ) rather than jiffies+(6*HZ). Now giving
+ * duff data!
+ *
+ * 5/ 4/96 - Made it use the new IOC_ macros rather than *ioc
+ * Hmm - giving unexpected FIQ and then timeouts
+ * 18/ 8/96 - Ran through indent -kr -i8
+ * Some changes to disc change detect; don't know how well it
+ * works.
+ * 24/ 8/96 - Put all the track buffering code back in from the atari
+ * code - I wonder if it will still work... No :-)
+ * Still works if I turn off track buffering.
+ * 25/ 8/96 - Changed the timer expires that I'd added back to be
+ * jiffies + ....; and it all sprang to life! Got 2.8K/sec
+ * off a cp -r of a 679K disc (showed 94% cpu usage!)
+ * (PC gets 14.3K/sec - 0% CPU!) Hmm - hard drive corrupt!
+ * Also perhaps that compile was with cache off.
+ * changed cli in fd_readtrack_check to cliIF
+ * changed vmallocs to kmalloc (whats the difference!!)
+ * Removed the busy wait loop in do_fd_request and replaced
+ * by a routine on tq_immediate; only 11% cpu on a dd off the
+ * raw disc - but the speed is the same.
+ * 1/ 9/96 - Idea (failed!) - set the 'disable spin-up sequence'
+ * when we read the track if we know the motor is on; didn't
+ * help - perhaps we have to do it in stepping as well.
+ * Nope. Still doesn't help.
+ * Hmm - what seems to be happening is that fd_readtrack_check
+ * is never getting called. Its job is to terminate the read
+ * just after we think we should have got the data; otherwise
+ * the fdc takes 1 second to timeout; which is what's happening
+ * Now I can see 'readtrack_timer' being set (which should do the
+ * call); but it never seems to be called - hmm!
+ * OK - I've moved the check to my tq_immediate code -
+ * and it WORKS! 13.95K/second at 19% CPU.
+ * I wish I knew why that timer didn't work.....
+ *
+ * 16/11/96 - Fiddled and frigged for 2.0.18
+ *
+ * DAG 30/01/99 - Started frobbing for 2.2.1
+ * DAG 20/06/99 - A little more frobbing:
+ * Included include/asm/uaccess.h for get_user/put_user
+ *
+ * DAG 1/09/00 - Dusted off for 2.4.0-test7
+ * MAX_SECTORS was name clashing so it is now FD1772_...
+ * Minor parameter, name layouts for 2.4.x differences
+ */
+
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/fd.h>
+#include <linux/fd1772.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/bitops.h>
+
+#include <asm/arch/oldlatches.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/hardware/ioc.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+
+/* Note: FD_MAX_UNITS could be redefined to 2 for the Atari (with
+ * little additional rework in this file). But I'm not yet sure if
+ * some other code depends on the number of floppies... (It is defined
+ * in a public header!)
+ */
+#if 0
+#undef FD_MAX_UNITS
+#define FD_MAX_UNITS 2
+#endif
+
+/* Ditto worries for Arc - DAG */
+#define FD_MAX_UNITS 4
+#define TRACKBUFFER 0
+/*#define DEBUG*/
+
+#ifdef DEBUG
+#define DPRINT(a) printk a
+#else
+#define DPRINT(a)
+#endif
+
+static struct request_queue *floppy_queue;
+
+#define MAJOR_NR FLOPPY_MAJOR
+#define FLOPPY_DMA 0
+#define DEVICE_NAME "floppy"
+#define QUEUE (floppy_queue)
+#define CURRENT elv_next_request(floppy_queue)
+
+/* Disk types: DD */
+static struct archy_disk_type {
+ const char *name;
+ unsigned spt; /* sectors per track */
+ unsigned blocks; /* total number of blocks */
+ unsigned stretch; /* track doubling ? */
+} disk_type[] = {
+
+ { "d360", 9, 720, 0 }, /* 360kB diskette */
+ { "D360", 9, 720, 1 }, /* 360kb in 720kb drive */
+ { "D720", 9, 1440, 0 }, /* 720kb diskette (DD) */
+ /*{ "D820", 10,1640, 0}, *//* DD disk with 82 tracks/10 sectors
+ - DAG - can't see how type detect can distinguish this
+ from 720K until it reads block 4 by which time its too late! */
+};
+
+#define NUM_DISK_TYPES (sizeof(disk_type)/sizeof(*disk_type))
+
+/*
+ * Maximum disk size (in kilobytes). This default is used whenever the
+ * current disk size is unknown.
+ */
+#define MAX_DISK_SIZE 720
+
+static struct gendisk *disks[FD_MAX_UNIT];
+
+/* current info on each unit */
+static struct archy_floppy_struct {
+ int connected; /* !=0 : drive is connected */
+ int autoprobe; /* !=0 : do autoprobe */
+
+ struct archy_disk_type *disktype; /* current type of disk */
+
+ int track; /* current head position or -1
+ * if unknown */
+ unsigned int steprate; /* steprate setting */
+ unsigned int wpstat; /* current state of WP signal
+ * (for disk change detection) */
+} unit[FD_MAX_UNITS];
+
+/* DAG: On Arc we spin on a flag being cleared by fdc1772_comendhandler which
+ is an assembler routine */
+extern void fdc1772_comendhandler(void); /* Actually doens't have these parameters - see fd1772.S */
+extern volatile int fdc1772_comendstatus;
+extern volatile int fdc1772_fdc_int_done;
+
+#define FDC1772BASE ((0x210000>>2)|0x80000000)
+
+#define FDC1772_READ(reg) inb(FDC1772BASE+(reg/2))
+
+/* DAG: You wouldn't be silly to ask why FDC1772_WRITE is a function rather
+ than the #def below - well simple - the #def won't compile - and I
+ don't understand why (__outwc not defined) */
+/* NOTE: Reg is 0,2,4,6 as opposed to 0,1,2,3 or 0,4,8,12 to keep compatibility
+ with the ST version of fd1772.h */
+/*#define FDC1772_WRITE(reg,val) outw(val,(reg+FDC1772BASE)); */
+void FDC1772_WRITE(int reg, unsigned char val)
+{
+ if (reg == FDC1772REG_CMD) {
+ DPRINT(("FDC1772_WRITE new command 0x%x @ %d\n", val,jiffies));
+ if (fdc1772_fdc_int_done) {
+ DPRINT(("FDC1772_WRITE: Hmm fdc1772_fdc_int_done true - resetting\n"));
+ fdc1772_fdc_int_done = 0;
+ };
+ };
+ outb(val, (reg / 2) + FDC1772BASE);
+};
+
+#define FD1772_MAX_SECTORS 22
+
+unsigned char *DMABuffer; /* buffer for writes */
+/*static unsigned long PhysDMABuffer; *//* physical address */
+/* DAG: On Arc we just go straight for the DMA buffer */
+#define PhysDMABuffer DMABuffer
+
+#ifdef TRACKBUFFER
+unsigned char *TrackBuffer; /* buffer for reads */
+#define PhysTrackBuffer TrackBuffer /* physical address */
+static int BufferDrive, BufferSide, BufferTrack;
+static int read_track; /* non-zero if we are reading whole tracks */
+
+#define SECTOR_BUFFER(sec) (TrackBuffer + ((sec)-1)*512)
+#define IS_BUFFERED(drive,side,track) \
+ (BufferDrive == (drive) && BufferSide == (side) && BufferTrack == (track))
+#endif
+
+/*
+ * These are global variables, as that's the easiest way to give
+ * information to interrupts. They are the data used for the current
+ * request.
+ */
+static int SelectedDrive = 0;
+static int ReqCmd, ReqBlock;
+static int ReqSide, ReqTrack, ReqSector, ReqCnt;
+static int HeadSettleFlag = 0;
+static unsigned char *ReqData, *ReqBuffer;
+static int MotorOn = 0, MotorOffTrys;
+
+/* Synchronization of FDC1772 access. */
+static volatile int fdc_busy = 0;
+static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
+
+
+/* long req'd for set_bit --RR */
+static unsigned long changed_floppies = 0xff, fake_change = 0;
+#define CHECK_CHANGE_DELAY HZ/2
+
+/* DAG - increased to 30*HZ - not sure if this is the correct thing to do */
+#define FD_MOTOR_OFF_DELAY (10*HZ)
+#define FD_MOTOR_OFF_MAXTRY (10*20)
+
+#define FLOPPY_TIMEOUT (6*HZ)
+#define RECALIBRATE_ERRORS 4 /* After this many errors the drive
+ * will be recalibrated. */
+#define MAX_ERRORS 8 /* After this many errors the driver
+ * will give up. */
+
+#define START_MOTOR_OFF_TIMER(delay) \
+ do { \
+ motor_off_timer.expires = jiffies + (delay); \
+ add_timer( &motor_off_timer ); \
+ MotorOffTrys = 0; \
+ } while(0)
+
+#define START_CHECK_CHANGE_TIMER(delay) \
+ do { \
+ mod_timer(&fd_timer, jiffies + (delay)); \
+ } while(0)
+
+#define START_TIMEOUT() \
+ do { \
+ mod_timer(&timeout_timer, jiffies+FLOPPY_TIMEOUT); \
+ } while(0)
+
+#define STOP_TIMEOUT() \
+ do { \
+ del_timer( &timeout_timer ); \
+ } while(0)
+
+#define ENABLE_IRQ() enable_irq(FIQ_FD1772+64);
+
+#define DISABLE_IRQ() disable_irq(FIQ_FD1772+64);
+
+static void fd1772_checkint(void);
+
+DECLARE_WORK(fd1772_tq, (void *)fd1772_checkint, NULL);
+/*
+ * The driver is trying to determine the correct media format
+ * while Probing is set. fd_rwsec_done() clears it after a
+ * successful access.
+ */
+static int Probing = 0;
+
+/* This flag is set when a dummy seek is necessary to make the WP
+ * status bit accessible.
+ */
+static int NeedSeek = 0;
+
+
+/***************************** Prototypes *****************************/
+
+static void fd_select_side(int side);
+static void fd_select_drive(int drive);
+static void fd_deselect(void);
+static void fd_motor_off_timer(unsigned long dummy);
+static void check_change(unsigned long dummy);
+static void floppy_irqconsequencehandler(void);
+static void fd_error(void);
+static void do_fd_action(int drive);
+static void fd_calibrate(void);
+static void fd_calibrate_done(int status);
+static void fd_seek(void);
+static void fd_seek_done(int status);
+static void fd_rwsec(void);
+#ifdef TRACKBUFFER
+static void fd_readtrack_check( unsigned long dummy );
+#endif
+static void fd_rwsec_done(int status);
+static void fd_times_out(unsigned long dummy);
+static void finish_fdc(void);
+static void finish_fdc_done(int dummy);
+static void floppy_off(unsigned int nr);
+static void setup_req_params(int drive);
+static void redo_fd_request(void);
+static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int
+ cmd, unsigned long param);
+static void fd_probe(int drive);
+static int fd_test_drive_present(int drive);
+static void config_types(void);
+static int floppy_open(struct inode *inode, struct file *filp);
+static int floppy_release(struct inode *inode, struct file *filp);
+static void do_fd_request(request_queue_t *);
+
+/************************* End of Prototypes **************************/
+
+static struct timer_list motor_off_timer =
+ TIMER_INITIALIZER(fd_motor_off_timer, 0, 0);
+
+#ifdef TRACKBUFFER
+static struct timer_list readtrack_timer =
+ TIMER_INITIALIZER(fd_readtrack_check, 0, 0);
+#endif
+
+static struct timer_list timeout_timer =
+ TIMER_INITIALIZER(fd_times_out, 0, 0);
+
+static struct timer_list fd_timer =
+ TIMER_INITIALIZER(check_change, 0, 0);
+
+/* DAG: Haven't got a clue what this is? */
+int stdma_islocked(void)
+{
+ return 0;
+};
+
+/* Select the side to use. */
+
+static void fd_select_side(int side)
+{
+ oldlatch_aupdate(LATCHA_SIDESEL, side ? 0 : LATCHA_SIDESEL);
+}
+
+
+/* Select a drive, update the FDC1772's track register
+ */
+
+static void fd_select_drive(int drive)
+{
+#ifdef DEBUG
+ printk("fd_select_drive:%d\n", drive);
+#endif
+ /* Hmm - nowhere do we seem to turn the motor on - I'm going to do it here! */
+ oldlatch_aupdate(LATCHA_MOTOR | LATCHA_INUSE, 0);
+
+ if (drive == SelectedDrive)
+ return;
+
+ oldlatch_aupdate(LATCHA_FDSELALL, 0xf - (1 << drive));
+
+ /* restore track register to saved value */
+ FDC1772_WRITE(FDC1772REG_TRACK, unit[drive].track);
+ udelay(25);
+
+ SelectedDrive = drive;
+}
+
+
+/* Deselect both drives. */
+
+static void fd_deselect(void)
+{
+ unsigned long flags;
+
+ DPRINT(("fd_deselect\n"));
+
+ oldlatch_aupdate(LATCHA_FDSELALL | LATCHA_MOTOR | LATCHA_INUSE, 0xf | LATCHA_MOTOR | LATCHA_INUSE);
+
+ SelectedDrive = -1;
+}
+
+
+/* This timer function deselects the drives when the FDC1772 switched the
+ * motor off. The deselection cannot happen earlier because the FDC1772
+ * counts the index signals, which arrive only if one drive is selected.
+ */
+
+static void fd_motor_off_timer(unsigned long dummy)
+{
+ unsigned long flags;
+ unsigned char status;
+ int delay;
+
+ del_timer(&motor_off_timer);
+
+ if (SelectedDrive < 0)
+ /* no drive selected, needn't deselect anyone */
+ return;
+
+ save_flags(flags);
+ cli();
+
+ if (fdc_busy) /* was stdma_islocked */
+ goto retry;
+
+ status = FDC1772_READ(FDC1772REG_STATUS);
+
+ if (!(status & 0x80)) {
+ /*
+ * motor already turned off by FDC1772 -> deselect drives
+ * In actual fact its this deselection which turns the motor
+ * off on the Arc, since the motor control is actually on
+ * Latch A
+ */
+ DPRINT(("fdc1772: deselecting in fd_motor_off_timer\n"));
+ fd_deselect();
+ MotorOn = 0;
+ restore_flags(flags);
+ return;
+ }
+ /* not yet off, try again */
+
+retry:
+ restore_flags(flags);
+ /* Test again later; if tested too often, it seems there is no disk
+ * in the drive and the FDC1772 will leave the motor on forever (or,
+ * at least until a disk is inserted). So we'll test only twice
+ * per second from then on...
+ */
+ delay = (MotorOffTrys < FD_MOTOR_OFF_MAXTRY) ?
+ (++MotorOffTrys, HZ / 20) : HZ / 2;
+ START_MOTOR_OFF_TIMER(delay);
+}
+
+
+/* This function is repeatedly called to detect disk changes (as good
+ * as possible) and keep track of the current state of the write protection.
+ */
+
+static void check_change(unsigned long dummy)
+{
+ static int drive = 0;
+
+ unsigned long flags;
+ int stat;
+
+ if (fdc_busy)
+ return; /* Don't start poking about if the fdc is busy */
+
+ return; /* let's just forget it for the mo DAG */
+
+ if (++drive > 1 || !unit[drive].connected)
+ drive = 0;
+
+ save_flags(flags);
+ cli();
+
+ if (!stdma_islocked()) {
+ stat = !!(FDC1772_READ(FDC1772REG_STATUS) & FDC1772STAT_WPROT);
+
+ /* The idea here is that if the write protect line has changed then
+ the disc must have changed */
+ if (stat != unit[drive].wpstat) {
+ DPRINT(("wpstat[%d] = %d\n", drive, stat));
+ unit[drive].wpstat = stat;
+ set_bit(drive, &changed_floppies);
+ }
+ }
+ restore_flags(flags);
+
+ START_CHECK_CHANGE_TIMER(CHECK_CHANGE_DELAY);
+}
+
+
+/* Handling of the Head Settling Flag: This flag should be set after each
+ * seek operation, because we don't use seeks with verify.
+ */
+
+static inline void set_head_settle_flag(void)
+{
+ HeadSettleFlag = FDC1772CMDADD_E;
+}
+
+static inline int get_head_settle_flag(void)
+{
+ int tmp = HeadSettleFlag;
+ HeadSettleFlag = 0;
+ return (tmp);
+}
+
+
+
+
+/* General Interrupt Handling */
+
+static inline void copy_buffer(void *from, void *to)
+{
+ ulong *p1 = (ulong *) from, *p2 = (ulong *) to;
+ int cnt;
+
+ for (cnt = 512 / 4; cnt; cnt--)
+ *p2++ = *p1++;
+}
+
+static void (*FloppyIRQHandler) (int status) = NULL;
+
+static void floppy_irqconsequencehandler(void)
+{
+ unsigned char status;
+ void (*handler) (int);
+
+ fdc1772_fdc_int_done = 0;
+
+ handler = FloppyIRQHandler;
+ FloppyIRQHandler = NULL;
+
+ if (handler) {
+ nop();
+ status = (unsigned char) fdc1772_comendstatus;
+ DPRINT(("FDC1772 irq, status = %02x handler = %08lx\n", (unsigned int) status, (unsigned long) handler));
+ handler(status);
+ } else {
+ DPRINT(("FDC1772 irq, no handler status=%02x\n", fdc1772_comendstatus));
+ }
+ DPRINT(("FDC1772 irq: end of floppy_irq\n"));
+}
+
+
+/* Error handling: If some error happened, retry some times, then
+ * recalibrate, then try again, and fail after MAX_ERRORS.
+ */
+
+static void fd_error(void)
+{
+ printk("FDC1772: fd_error\n");
+ /*panic("fd1772: fd_error"); *//* DAG tmp */
+ if (!CURRENT)
+ return;
+ CURRENT->errors++;
+ if (CURRENT->errors >= MAX_ERRORS) {
+ printk("fd%d: too many errors.\n", SelectedDrive);
+ end_request(CURRENT, 0);
+ } else if (CURRENT->errors == RECALIBRATE_ERRORS) {
+ printk("fd%d: recalibrating\n", SelectedDrive);
+ if (SelectedDrive != -1)
+ unit[SelectedDrive].track = -1;
+ }
+ redo_fd_request();
+}
+
+
+
+#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while(0)
+
+
+/* do_fd_action() is the general procedure for a fd request: All
+ * required parameter settings (drive select, side select, track
+ * position) are checked and set if needed. For each of these
+ * parameters and the actual reading or writing exist two functions:
+ * one that starts the setting (or skips it if possible) and one
+ * callback for the "done" interrupt. Each done func calls the next
+ * set function to propagate the request down to fd_rwsec_done().
+ */
+
+static void do_fd_action(int drive)
+{
+ struct request *req;
+ DPRINT(("do_fd_action unit[drive].track=%d\n", unit[drive].track));
+
+#ifdef TRACKBUFFER
+repeat:
+
+ if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
+ req = CURRENT;
+ if (ReqCmd == READ) {
+ copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
+ if (++ReqCnt < req->current_nr_sectors) {
+ /* read next sector */
+ setup_req_params( drive );
+ goto repeat;
+ } else {
+ /* all sectors finished */
+ req->nr_sectors -= req->current_nr_sectors;
+ req->sector += req->current_nr_sectors;
+ end_request(req, 1);
+ redo_fd_request();
+ return;
+ }
+ } else {
+ /* cmd == WRITE, pay attention to track buffer
+ * consistency! */
+ copy_buffer( ReqData, SECTOR_BUFFER(ReqSector) );
+ }
+ }
+#endif
+
+ if (SelectedDrive != drive) {
+ /*unit[drive].track = -1; DAG */
+ fd_select_drive(drive);
+ };
+
+
+ if (unit[drive].track == -1)
+ fd_calibrate();
+ else if (unit[drive].track != ReqTrack << unit[drive].disktype->stretch)
+ fd_seek();
+ else
+ fd_rwsec();
+}
+
+
+/* Seek to track 0 if the current track is unknown */
+
+static void fd_calibrate(void)
+{
+ DPRINT(("fd_calibrate\n"));
+ if (unit[SelectedDrive].track >= 0) {
+ fd_calibrate_done(0);
+ return;
+ }
+ DPRINT(("fd_calibrate (after track compare)\n"));
+ SET_IRQ_HANDLER(fd_calibrate_done);
+ /* we can't verify, since the speed may be incorrect */
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_RESTORE | unit[SelectedDrive].steprate);
+
+ NeedSeek = 1;
+ MotorOn = 1;
+ START_TIMEOUT();
+ /* wait for IRQ */
+}
+
+
+static void fd_calibrate_done(int status)
+{
+ DPRINT(("fd_calibrate_done()\n"));
+ STOP_TIMEOUT();
+
+ /* set the correct speed now */
+ if (status & FDC1772STAT_RECNF) {
+ printk("fd%d: restore failed\n", SelectedDrive);
+ fd_error();
+ } else {
+ unit[SelectedDrive].track = 0;
+ fd_seek();
+ }
+}
+
+
+/* Seek the drive to the requested track. The drive must have been
+ * calibrated at some point before this.
+ */
+
+static void fd_seek(void)
+{
+ unsigned long flags;
+ DPRINT(("fd_seek() to track %d (unit[SelectedDrive].track=%d)\n", ReqTrack,
+ unit[SelectedDrive].track));
+ if (unit[SelectedDrive].track == ReqTrack <<
+ unit[SelectedDrive].disktype->stretch) {
+ fd_seek_done(0);
+ return;
+ }
+ FDC1772_WRITE(FDC1772REG_DATA, ReqTrack <<
+ unit[SelectedDrive].disktype->stretch);
+ udelay(25);
+ save_flags(flags);
+ clf();
+ SET_IRQ_HANDLER(fd_seek_done);
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_SEEK | unit[SelectedDrive].steprate |
+ /* DAG */
+ (MotorOn?FDC1772CMDADD_H:0));
+
+ restore_flags(flags);
+ MotorOn = 1;
+ set_head_settle_flag();
+ START_TIMEOUT();
+ /* wait for IRQ */
+}
+
+
+static void fd_seek_done(int status)
+{
+ DPRINT(("fd_seek_done()\n"));
+ STOP_TIMEOUT();
+
+ /* set the correct speed */
+ if (status & FDC1772STAT_RECNF) {
+ printk("fd%d: seek error (to track %d)\n",
+ SelectedDrive, ReqTrack);
+ /* we don't know exactly which track we are on now! */
+ unit[SelectedDrive].track = -1;
+ fd_error();
+ } else {
+ unit[SelectedDrive].track = ReqTrack <<
+ unit[SelectedDrive].disktype->stretch;
+ NeedSeek = 0;
+ fd_rwsec();
+ }
+}
+
+
+/* This does the actual reading/writing after positioning the head
+ * over the correct track.
+ */
+
+#ifdef TRACKBUFFER
+static int MultReadInProgress = 0;
+#endif
+
+
+static void fd_rwsec(void)
+{
+ unsigned long paddr, flags;
+ unsigned int rwflag, old_motoron;
+ unsigned int track;
+
+ DPRINT(("fd_rwsec(), Sec=%d, Access=%c\n", ReqSector, ReqCmd == WRITE ? 'w' : 'r'));
+ if (ReqCmd == WRITE) {
+ /*cache_push( (unsigned long)ReqData, 512 ); */
+ paddr = (unsigned long) ReqData;
+ rwflag = 0x100;
+ } else {
+ paddr = (unsigned long) PhysDMABuffer;
+#ifdef TRACKBUFFER
+ if (read_track)
+ paddr = (unsigned long)PhysTrackBuffer;
+#endif
+ rwflag = 0;
+ }
+
+ DPRINT(("fd_rwsec() before sidesel rwflag=%d sec=%d trk=%d\n", rwflag,
+ ReqSector, FDC1772_READ(FDC1772REG_TRACK)));
+ fd_select_side(ReqSide);
+
+ /*DPRINT(("fd_rwsec() before start sector \n")); */
+ /* Start sector of this operation */
+#ifdef TRACKBUFFER
+ FDC1772_WRITE( FDC1772REG_SECTOR, !read_track ? ReqSector : 1 );
+#else
+ FDC1772_WRITE( FDC1772REG_SECTOR, ReqSector );
+#endif
+
+ /* Cheat for track if stretch != 0 */
+ if (unit[SelectedDrive].disktype->stretch) {
+ track = FDC1772_READ(FDC1772REG_TRACK);
+ FDC1772_WRITE(FDC1772REG_TRACK, track >>
+ unit[SelectedDrive].disktype->stretch);
+ }
+ udelay(25);
+
+ DPRINT(("fd_rwsec() before setup DMA \n"));
+ /* Setup DMA - Heavily modified by DAG */
+ save_flags(flags);
+ clf();
+ disable_dma(FLOPPY_DMA);
+ set_dma_mode(FLOPPY_DMA, rwflag ? DMA_MODE_WRITE : DMA_MODE_READ);
+ set_dma_addr(FLOPPY_DMA, (long) paddr); /* DAG - changed from Atari specific */
+#ifdef TRACKBUFFER
+ set_dma_count(FLOPPY_DMA,(!read_track ? 1 : unit[SelectedDrive].disktype->spt)*512);
+#else
+ set_dma_count(FLOPPY_DMA, 512); /* Block/sector size - going to have to change */
+#endif
+ SET_IRQ_HANDLER(fd_rwsec_done);
+ /* Turn on dma int */
+ enable_dma(FLOPPY_DMA);
+ /* Now give it something to do */
+ FDC1772_WRITE(FDC1772REG_CMD, (rwflag ? (FDC1772CMD_WRSEC | FDC1772CMDADD_P) :
+#ifdef TRACKBUFFER
+ (FDC1772CMD_RDSEC | (read_track ? FDC1772CMDADD_M : 0) |
+ /* Hmm - the idea here is to stop the FDC spinning the disc
+ up when we know that we already still have it spinning */
+ (MotorOn?FDC1772CMDADD_H:0))
+#else
+ FDC1772CMD_RDSEC
+#endif
+ ));
+
+ restore_flags(flags);
+ DPRINT(("fd_rwsec() after DMA setup flags=0x%08x\n", flags));
+ /*sti(); *//* DAG - Hmm */
+ /* Hmm - should do something DAG */
+ old_motoron = MotorOn;
+ MotorOn = 1;
+ NeedSeek = 1;
+
+ /* wait for interrupt */
+
+#ifdef TRACKBUFFER
+ if (read_track) {
+ /*
+ * If reading a whole track, wait about one disk rotation and
+ * then check if all sectors are read. The FDC will even
+ * search for the first non-existant sector and need 1 sec to
+ * recognise that it isn't present :-(
+ */
+ /* 1 rot. + 5 rot.s if motor was off */
+ mod_timer(&readtrack_timer, jiffies + HZ/5 + (old_motoron ? 0 : HZ));
+ DPRINT(("Setting readtrack_timer to %d @ %d\n",
+ readtrack_timer.expires,jiffies));
+ MultReadInProgress = 1;
+ }
+#endif
+
+ /*DPRINT(("fd_rwsec() before START_TIMEOUT \n")); */
+ START_TIMEOUT();
+ /*DPRINT(("fd_rwsec() after START_TIMEOUT \n")); */
+}
+
+
+#ifdef TRACKBUFFER
+
+static void fd_readtrack_check(unsigned long dummy)
+{
+ unsigned long flags, addr;
+ extern unsigned char *fdc1772_dataaddr;
+
+ DPRINT(("fd_readtrack_check @ %d\n",jiffies));
+
+ save_flags(flags);
+ clf();
+
+ del_timer( &readtrack_timer );
+
+ if (!MultReadInProgress) {
+ /* This prevents a race condition that could arise if the
+ * interrupt is triggered while the calling of this timer
+ * callback function takes place. The IRQ function then has
+ * already cleared 'MultReadInProgress' when control flow
+ * gets here.
+ */
+ restore_flags(flags);
+ return;
+ }
+
+ /* get the current DMA address */
+ addr=(unsigned long)fdc1772_dataaddr; /* DAG - ? */
+ DPRINT(("fd_readtrack_check: addr=%x PhysTrackBuffer=%x\n",addr,PhysTrackBuffer));
+
+ if (addr >= (unsigned int)PhysTrackBuffer + unit[SelectedDrive].disktype->spt*512) {
+ /* already read enough data, force an FDC interrupt to stop
+ * the read operation
+ */
+ SET_IRQ_HANDLER( NULL );
+ restore_flags(flags);
+ DPRINT(("fd_readtrack_check(): done\n"));
+ FDC1772_WRITE( FDC1772REG_CMD, FDC1772CMD_FORCI );
+ udelay(25);
+
+ /* No error until now -- the FDC would have interrupted
+ * otherwise!
+ */
+ fd_rwsec_done( 0 );
+ } else {
+ /* not yet finished, wait another tenth rotation */
+ restore_flags(flags);
+ DPRINT(("fd_readtrack_check(): not yet finished\n"));
+ readtrack_timer.expires = jiffies + HZ/5/10;
+ add_timer( &readtrack_timer );
+ }
+}
+
+#endif
+
+static void fd_rwsec_done(int status)
+{
+ unsigned int track;
+
+ DPRINT(("fd_rwsec_done() status=%d @ %d\n", status,jiffies));
+
+#ifdef TRACKBUFFER
+ if (read_track && !MultReadInProgress)
+ return;
+
+ MultReadInProgress = 0;
+
+ STOP_TIMEOUT();
+
+ if (read_track)
+ del_timer( &readtrack_timer );
+#endif
+
+
+ /* Correct the track if stretch != 0 */
+ if (unit[SelectedDrive].disktype->stretch) {
+ track = FDC1772_READ(FDC1772REG_TRACK);
+ FDC1772_WRITE(FDC1772REG_TRACK, track <<
+ unit[SelectedDrive].disktype->stretch);
+ }
+ if (ReqCmd == WRITE && (status & FDC1772STAT_WPROT)) {
+ printk("fd%d: is write protected\n", SelectedDrive);
+ goto err_end;
+ }
+ if ((status & FDC1772STAT_RECNF)
+#ifdef TRACKBUFFER
+ /* RECNF is no error after a multiple read when the FDC
+ * searched for a non-existant sector!
+ */
+ && !(read_track &&
+ FDC1772_READ(FDC1772REG_SECTOR) > unit[SelectedDrive].disktype->spt)
+#endif
+ ) {
+ if (Probing) {
+ if (unit[SelectedDrive].disktype > disk_type) {
+ /* try another disk type */
+ unit[SelectedDrive].disktype--;
+ set_capacity(disks[SelectedDrive],
+ unit[SelectedDrive].disktype->blocks);
+ } else
+ Probing = 0;
+ } else {
+ /* record not found, but not probing. Maybe stretch wrong ? Restart probing */
+ if (unit[SelectedDrive].autoprobe) {
+ unit[SelectedDrive].disktype = disk_type + NUM_DISK_TYPES - 1;
+ set_capacity(disks[SelectedDrive],
+ unit[SelectedDrive].disktype->blocks);
+ Probing = 1;
+ }
+ }
+ if (Probing) {
+ setup_req_params(SelectedDrive);
+#ifdef TRACKBUFFER
+ BufferDrive = -1;
+#endif
+ do_fd_action(SelectedDrive);
+ return;
+ }
+ printk("fd%d: sector %d not found (side %d, track %d)\n",
+ SelectedDrive, FDC1772_READ(FDC1772REG_SECTOR), ReqSide, ReqTrack);
+ goto err_end;
+ }
+ if (status & FDC1772STAT_CRC) {
+ printk("fd%d: CRC error (side %d, track %d, sector %d)\n",
+ SelectedDrive, ReqSide, ReqTrack, FDC1772_READ(FDC1772REG_SECTOR));
+ goto err_end;
+ }
+ if (status & FDC1772STAT_LOST) {
+ printk("fd%d: lost data (side %d, track %d, sector %d)\n",
+ SelectedDrive, ReqSide, ReqTrack, FDC1772_READ(FDC1772REG_SECTOR));
+ goto err_end;
+ }
+ Probing = 0;
+
+ if (ReqCmd == READ) {
+#ifdef TRACKBUFFER
+ if (!read_track) {
+ /*cache_clear (PhysDMABuffer, 512);*/
+ copy_buffer (DMABuffer, ReqData);
+ } else {
+ /*cache_clear (PhysTrackBuffer, FD1772_MAX_SECTORS * 512);*/
+ BufferDrive = SelectedDrive;
+ BufferSide = ReqSide;
+ BufferTrack = ReqTrack;
+ copy_buffer (SECTOR_BUFFER (ReqSector), ReqData);
+ }
+#else
+ /*cache_clear( PhysDMABuffer, 512 ); */
+ copy_buffer(DMABuffer, ReqData);
+#endif
+ }
+ if (++ReqCnt < CURRENT->current_nr_sectors) {
+ /* read next sector */
+ setup_req_params(SelectedDrive);
+ do_fd_action(SelectedDrive);
+ } else {
+ /* all sectors finished */
+ CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
+ CURRENT->sector += CURRENT->current_nr_sectors;
+ end_request(CURRENT, 1);
+ redo_fd_request();
+ }
+ return;
+
+err_end:
+#ifdef TRACKBUFFER
+ BufferDrive = -1;
+#endif
+
+ fd_error();
+}
+
+
+static void fd_times_out(unsigned long dummy)
+{
+ SET_IRQ_HANDLER(NULL);
+ /* If the timeout occurred while the readtrack_check timer was
+ * active, we need to cancel it, else bad things will happen */
+ del_timer( &readtrack_timer );
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_FORCI);
+ udelay(25);
+
+ printk("floppy timeout\n");
+ STOP_TIMEOUT(); /* hmm - should we do this ? */
+ fd_error();
+}
+
+
+/* The (noop) seek operation here is needed to make the WP bit in the
+ * FDC1772 status register accessible for check_change. If the last disk
+ * operation would have been a RDSEC, this bit would always read as 0
+ * no matter what :-( To save time, the seek goes to the track we're
+ * already on.
+ */
+
+static void finish_fdc(void)
+{
+ /* DAG - just try without this dummy seek! */
+ finish_fdc_done(0);
+ return;
+
+ if (!NeedSeek) {
+ finish_fdc_done(0);
+ } else {
+ DPRINT(("finish_fdc: dummy seek started\n"));
+ FDC1772_WRITE(FDC1772REG_DATA, unit[SelectedDrive].track);
+ SET_IRQ_HANDLER(finish_fdc_done);
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_SEEK);
+ MotorOn = 1;
+ START_TIMEOUT();
+ /* we must wait for the IRQ here, because the ST-DMA is
+ * released immediately afterwards and the interrupt may be
+ * delivered to the wrong driver.
+ */
+ }
+}
+
+
+static void finish_fdc_done(int dummy)
+{
+ unsigned long flags;
+
+ DPRINT(("finish_fdc_done entered\n"));
+ STOP_TIMEOUT();
+ NeedSeek = 0;
+
+ if (timer_pending(&fd_timer) &&
+ time_after(jiffies + 5, fd_timer.expires))
+ /* If the check for a disk change is done too early after this
+ * last seek command, the WP bit still reads wrong :-((
+ */
+ mod_timer(&fd_timer, jiffies + 5);
+ else {
+ /* START_CHECK_CHANGE_TIMER( CHECK_CHANGE_DELAY ); */
+ };
+ del_timer(&motor_off_timer);
+ START_MOTOR_OFF_TIMER(FD_MOTOR_OFF_DELAY);
+
+ save_flags(flags);
+ cli();
+ /* stdma_release(); - not sure if I should do something DAG */
+ fdc_busy = 0;
+ wake_up(&fdc_wait);
+ restore_flags(flags);
+
+ DPRINT(("finish_fdc() finished\n"));
+}
+
+
+/* Prevent "aliased" accesses. */
+static int fd_ref[4];
+static int fd_device[4];
+
+/* dummy for blk.h */
+static void floppy_off(unsigned int nr)
+{
+}
+
+
+/* On the old arcs write protect depends on the particular model
+ of machine. On the A310, R140, and A440 there is a disc changed
+ detect, however on the A4x0/1 range there is not. There
+ is nothing to tell you which machine your on.
+ At the moment I'm just marking changed always. I've
+ left the Atari's 'change on write protect change' code in this
+ part (but nothing sets it).
+ RiscOS apparently checks the disc serial number etc. to detect changes
+ - but if it sees a disc change line go high (?) it flips to using
+ it. Well maybe I'll add that in the future (!?)
+*/
+static int check_floppy_change(struct gendisk *disk)
+{
+ struct archy_floppy_struct *p = disk->private_data;
+ unsigned int drive = p - unit;
+
+ if (test_bit(drive, &fake_change)) {
+ /* simulated change (e.g. after formatting) */
+ return 1;
+ }
+ if (test_bit(drive, &changed_floppies)) {
+ /* surely changed (the WP signal changed at least once) */
+ return 1;
+ }
+ if (p->wpstat) {
+ /* WP is on -> could be changed: to be sure, buffers should be
+ * invalidated...
+ */
+ return 1;
+ }
+ return 1; /* DAG - was 0 */
+}
+
+static int floppy_revalidate(struct gendisk *disk)
+{
+ struct archy_floppy_struct *p = disk->private_data;
+ unsigned int drive = p - unit;
+
+ if (test_bit(drive, &changed_floppies) || test_bit(drive, &fake_change)
+ || unit[drive].disktype == 0) {
+#ifdef TRACKBUFFER
+ BufferDrive = -1;
+#endif
+ clear_bit(drive, &fake_change);
+ clear_bit(drive, &changed_floppies);
+ p->disktype = 0;
+ }
+ return 0;
+}
+
+/* This sets up the global variables describing the current request. */
+
+static void setup_req_params(int drive)
+{
+ int block = ReqBlock + ReqCnt;
+
+ ReqTrack = block / unit[drive].disktype->spt;
+ ReqSector = block - ReqTrack * unit[drive].disktype->spt + 1;
+ ReqSide = ReqTrack & 1;
+ ReqTrack >>= 1;
+ ReqData = ReqBuffer + 512 * ReqCnt;
+
+#ifdef TRACKBUFFER
+ read_track = (ReqCmd == READ && CURRENT->errors == 0);
+#endif
+
+ DPRINT(("Request params: Si=%d Tr=%d Se=%d Data=%08lx\n", ReqSide,
+ ReqTrack, ReqSector, (unsigned long) ReqData));
+}
+
+
+static void redo_fd_request(void)
+{
+ int drive, type;
+ struct archy_floppy_struct *floppy;
+
+ DPRINT(("redo_fd_request: CURRENT=%p dev=%s CURRENT->sector=%ld\n",
+ CURRENT, CURRENT ? CURRENT->rq_disk->disk_name : "",
+ CURRENT ? CURRENT->sector : 0));
+
+repeat:
+
+ if (!CURRENT)
+ goto the_end;
+
+ floppy = CURRENT->rq_disk->private_data;
+ drive = floppy - unit;
+ type = fd_device[drive];
+
+ if (!floppy->connected) {
+ /* drive not connected */
+ printk("Unknown Device: fd%d\n", drive);
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+ if (type == 0) {
+ if (!floppy->disktype) {
+ Probing = 1;
+ floppy->disktype = disk_type + NUM_DISK_TYPES - 1;
+ set_capacity(disks[drive], floppy->disktype->blocks);
+ floppy->autoprobe = 1;
+ }
+ } else {
+ /* user supplied disk type */
+ --type;
+ if (type >= NUM_DISK_TYPES) {
+ printk("fd%d: invalid disk format", drive);
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+ floppy->disktype = &disk_type[type];
+ set_capacity(disks[drive], floppy->disktype->blocks);
+ floppy->autoprobe = 0;
+ }
+
+ if (CURRENT->sector + 1 > floppy->disktype->blocks) {
+ end_request(CURRENT, 0);
+ goto repeat;
+ }
+ /* stop deselect timer */
+ del_timer(&motor_off_timer);
+
+ ReqCnt = 0;
+ ReqCmd = CURRENT->cmd;
+ ReqBlock = CURRENT->sector;
+ ReqBuffer = CURRENT->buffer;
+ setup_req_params(drive);
+ do_fd_action(drive);
+
+ return;
+
+the_end:
+ finish_fdc();
+}
+
+static void fd1772_checkint(void)
+{
+ extern int fdc1772_bytestogo;
+
+ /*printk("fd1772_checkint %d\n",fdc1772_fdc_int_done);*/
+ if (fdc1772_fdc_int_done)
+ floppy_irqconsequencehandler();
+ if ((MultReadInProgress) && (fdc1772_bytestogo==0)) fd_readtrack_check(0);
+ if (fdc_busy) {
+ schedule_work(&fd1772_tq);
+ }
+}
+
+static void do_fd_request(request_queue_t* q)
+{
+ unsigned long flags;
+
+ DPRINT(("do_fd_request for pid %d\n", current->pid));
+ if (fdc_busy) return;
+ save_flags(flags);
+ cli();
+ while (fdc_busy)
+ sleep_on(&fdc_wait);
+ fdc_busy = 1;
+ ENABLE_IRQ();
+ restore_flags(flags);
+
+ fdc1772_fdc_int_done = 0;
+
+ redo_fd_request();
+
+ schedule_work(&fd1772_tq);
+}
+
+
+static int invalidate_drive(struct block_device *bdev)
+{
+ struct archy_floppy_struct *p = bdev->bd_disk->private_data;
+ /* invalidate the buffer track to force a reread */
+#ifdef TRACKBUFFER
+ BufferDrive = -1;
+#endif
+
+ set_bit(p - unit, &fake_change);
+ return 0;
+}
+
+static int fd_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long param)
+{
+ struct block_device *bdev = inode->i_bdev;
+
+ switch (cmd) {
+ case FDFMTEND:
+ case FDFLUSH:
+ invalidate_drive(bdev);
+ check_disk_change(bdev);
+ case FDFMTBEG:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+
+/* Initialize the 'unit' variable for drive 'drive' */
+
+static void fd_probe(int drive)
+{
+ unit[drive].connected = 0;
+ unit[drive].disktype = NULL;
+
+ if (!fd_test_drive_present(drive))
+ return;
+
+ unit[drive].connected = 1;
+ unit[drive].track = -1; /* If we put the auto detect back in this can go to 0 */
+ unit[drive].steprate = FDC1772STEP_6;
+ MotorOn = 1; /* from probe restore operation! */
+}
+
+
+/* This function tests the physical presence of a floppy drive (not
+ * whether a disk is inserted). This is done by issuing a restore
+ * command, waiting max. 2 seconds (that should be enough to move the
+ * head across the whole disk) and looking at the state of the "TR00"
+ * signal. This should now be raised if there is a drive connected
+ * (and there is no hardware failure :-) Otherwise, the drive is
+ * declared absent.
+ */
+
+static int fd_test_drive_present(int drive)
+{
+ unsigned long timeout;
+ unsigned char status;
+ int ok;
+
+ printk("fd_test_drive_present %d\n", drive);
+ if (drive > 1)
+ return (0);
+ return (1); /* Simple hack for the moment - the autodetect doesn't seem to work on arc */
+ fd_select_drive(drive);
+
+ /* disable interrupt temporarily */
+ DISABLE_IRQ();
+ FDC1772_WRITE(FDC1772REG_TRACK, 0x00); /* was ff00 why? */
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_RESTORE | FDC1772CMDADD_H | FDC1772STEP_6);
+
+ /*printk("fd_test_drive_present: Going into timeout loop\n"); */
+ for (ok = 0, timeout = jiffies + 2 * HZ + HZ / 2; time_before(jiffies, timeout);) {
+ /* What does this piece of atariism do? - query for an interrupt? */
+ /* if (!(mfp.par_dt_reg & 0x20))
+ break; */
+ /* Well this is my nearest guess - quit when we get an FDC interrupt */
+ if (ioc_readb(IOC_FIQSTAT) & 2)
+ break;
+ }
+
+ /*printk("fd_test_drive_present: Coming out of timeout loop\n"); */
+ status = FDC1772_READ(FDC1772REG_STATUS);
+ ok = (status & FDC1772STAT_TR00) != 0;
+
+ /*printk("fd_test_drive_present: ok=%d\n",ok); */
+ /* force interrupt to abort restore operation (FDC1772 would try
+ * about 50 seconds!) */
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_FORCI);
+ udelay(500);
+ status = FDC1772_READ(FDC1772REG_STATUS);
+ udelay(20);
+ /*printk("fd_test_drive_present: just before OK code %d\n",ok); */
+
+ if (ok) {
+ /* dummy seek command to make WP bit accessible */
+ FDC1772_WRITE(FDC1772REG_DATA, 0);
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_SEEK);
+ printk("fd_test_drive_present: just before wait for int\n");
+ /* DAG: Guess means wait for interrupt */
+ while (!(ioc_readb(IOC_FIQSTAT) & 2));
+ printk("fd_test_drive_present: just after wait for int\n");
+ status = FDC1772_READ(FDC1772REG_STATUS);
+ }
+ printk("fd_test_drive_present: just before ENABLE_IRQ\n");
+ ENABLE_IRQ();
+ printk("fd_test_drive_present: about to return\n");
+ return (ok);
+}
+
+
+/* Look how many and which kind of drives are connected. If there are
+ * floppies, additionally start the disk-change and motor-off timers.
+ */
+
+static void config_types(void)
+{
+ int drive, cnt = 0;
+
+ printk("Probing floppy drive(s):\n");
+ for (drive = 0; drive < FD_MAX_UNITS; drive++) {
+ fd_probe(drive);
+ if (unit[drive].connected) {
+ printk("fd%d\n", drive);
+ ++cnt;
+ }
+ }
+
+ if (FDC1772_READ(FDC1772REG_STATUS) & FDC1772STAT_BUSY) {
+ /* If FDC1772 is still busy from probing, give it another FORCI
+ * command to abort the operation. If this isn't done, the FDC1772
+ * will interrupt later and its IRQ line stays low, because
+ * the status register isn't read. And this will block any
+ * interrupts on this IRQ line :-(
+ */
+ FDC1772_WRITE(FDC1772REG_CMD, FDC1772CMD_FORCI);
+ udelay(500);
+ FDC1772_READ(FDC1772REG_STATUS);
+ udelay(20);
+ }
+ if (cnt > 0) {
+ START_MOTOR_OFF_TIMER(FD_MOTOR_OFF_DELAY);
+ if (cnt == 1)
+ fd_select_drive(0);
+ /*START_CHECK_CHANGE_TIMER( CHECK_CHANGE_DELAY ); */
+ }
+}
+
+/*
+ * floppy_open check for aliasing (/dev/fd0 can be the same as
+ * /dev/PS0 etc), and disallows simultaneous access to the same
+ * drive with different device numbers.
+ */
+
+static int floppy_open(struct inode *inode, struct file *filp)
+{
+ int drive = iminor(inode) & 3;
+ int type = iminor(inode) >> 2;
+ int old_dev = fd_device[drive];
+
+ if (fd_ref[drive] && old_dev != type)
+ return -EBUSY;
+
+ if (fd_ref[drive] == -1 || (fd_ref[drive] && filp->f_flags & O_EXCL))
+ return -EBUSY;
+
+ if (filp->f_flags & O_EXCL)
+ fd_ref[drive] = -1;
+ else
+ fd_ref[drive]++;
+
+ fd_device[drive] = type;
+
+ if (filp->f_flags & O_NDELAY)
+ return 0;
+
+ if (filp->f_mode & 3) {
+ check_disk_change(inode->i_bdev);
+ if (filp->f_mode & 2) {
+ if (unit[drive].wpstat) {
+ floppy_release(inode, filp);
+ return -EROFS;
+ }
+ }
+ }
+ return 0;
+}
+
+
+static int floppy_release(struct inode *inode, struct file *filp)
+{
+ int drive = iminor(inode) & 3;
+
+ if (fd_ref[drive] < 0)
+ fd_ref[drive] = 0;
+ else if (!fd_ref[drive]--) {
+ printk("floppy_release with fd_ref == 0");
+ fd_ref[drive] = 0;
+ }
+
+ return 0;
+}
+
+static struct block_device_operations floppy_fops =
+{
+ .open = floppy_open,
+ .release = floppy_release,
+ .ioctl = fd_ioctl,
+ .media_changed = check_floppy_change,
+ .revalidate_disk= floppy_revalidate,
+};
+
+static struct kobject *floppy_find(dev_t dev, int *part, void *data)
+{
+ int drive = *part & 3;
+ if ((*part >> 2) > NUM_DISK_TYPES || drive >= FD_MAX_UNITS)
+ return NULL;
+ *part = 0;
+ return get_disk(disks[drive]);
+}
+
+int fd1772_init(void)
+{
+ static DEFINE_SPINLOCK(lock);
+ int i, err = -ENOMEM;
+
+ if (!machine_is_archimedes())
+ return 0;
+
+ for (i = 0; i < FD_MAX_UNITS; i++) {
+ disks[i] = alloc_disk(1);
+ if (!disks[i])
+ goto err_disk;
+ }
+
+ err = register_blkdev(MAJOR_NR, "fd");
+ if (err)
+ goto err_disk;
+
+ err = -EBUSY;
+ if (request_dma(FLOPPY_DMA, "fd1772")) {
+ printk("Unable to grab DMA%d for the floppy (1772) driver\n", FLOPPY_DMA);
+ goto err_blkdev;
+ };
+
+ if (request_dma(FIQ_FD1772, "fd1772 end")) {
+ printk("Unable to grab DMA%d for the floppy (1772) driver\n", FIQ_FD1772);
+ goto err_dma1;
+ };
+
+ /* initialize variables */
+ SelectedDrive = -1;
+#ifdef TRACKBUFFER
+ BufferDrive = BufferSide = BufferTrack = -1;
+ /* Atari uses 512 - I want to eventually cope with 1K sectors */
+ DMABuffer = (char *)kmalloc((FD1772_MAX_SECTORS+1)*512,GFP_KERNEL);
+ TrackBuffer = DMABuffer + 512;
+#else
+ /* Allocate memory for the DMAbuffer - on the Atari this takes it
+ out of some special memory... */
+ DMABuffer = (char *) kmalloc(2048); /* Copes with pretty large sectors */
+#endif
+ err = -ENOMEM;
+ if (!DMAbuffer)
+ goto err_dma2;
+
+ enable_dma(FIQ_FD1772); /* This inserts a call to our command end routine */
+
+ floppy_queue = blk_init_queue(do_fd_request, &lock);
+ if (!floppy_queue)
+ goto err_queue;
+
+ for (i = 0; i < FD_MAX_UNITS; i++) {
+ unit[i].track = -1;
+ disks[i]->major = MAJOR_NR;
+ disks[i]->first_minor = 0;
+ disks[i]->fops = &floppy_fops;
+ sprintf(disks[i]->disk_name, "fd%d", i);
+ disks[i]->private_data = &unit[i];
+ disks[i]->queue = floppy_queue;
+ set_capacity(disks[i], MAX_DISK_SIZE * 2);
+ }
+ blk_register_region(MKDEV(MAJOR_NR, 0), 256, THIS_MODULE,
+ floppy_find, NULL, NULL);
+
+ for (i = 0; i < FD_MAX_UNITS; i++)
+ add_disk(disks[i]);
+
+ config_types();
+
+ return 0;
+
+ err_queue:
+ kfree(DMAbuffer);
+ err_dma2:
+ free_dma(FIQ_FD1772);
+
+ err_dma1:
+ free_dma(FLOPPY_DMA);
+
+ err_blkdev:
+ unregister_blkdev(MAJOR_NR, "fd");
+
+ err_disk:
+ while (i--)
+ put_disk(disks[i]);
+ return err;
+}
diff --git a/drivers/acorn/block/fd1772dma.S b/drivers/acorn/block/fd1772dma.S
new file mode 100644
index 000000000000..7964435443ec
--- /dev/null
+++ b/drivers/acorn/block/fd1772dma.S
@@ -0,0 +1,100 @@
+#include <asm/hardware.h>
+
+@ Code for DMA with the 1772 fdc
+.text
+
+
+ .global fdc1772_dataaddr
+fdc1772_fiqdata:
+@ Number of bytes left to DMA
+ .global fdc1772_bytestogo
+fdc1772_bytestogo:
+ .word 0
+@ Place to put/get data from in DMA
+ .global fdc1772_dataaddr
+fdc1772_dataaddr:
+ .word 0
+
+ .global fdc1772_fdc_int_done
+fdc1772_fdc_int_done:
+ .word 0
+ .global fdc1772_comendstatus
+fdc1772_comendstatus:
+ .word 0
+
+@ We hang this off DMA channel 1
+ .global fdc1772_comendhandler
+fdc1772_comendhandler:
+ mov r8,#IOC_BASE
+ ldrb r9,[r8,#0x34] @ IOC FIQ status
+ tst r9,#2
+ subeqs pc,r14,#4 @ should I leave a space here
+ orr r9,r8,#0x10000 @ FDC base
+ adr r8,fdc1772_fdc_int_done
+ ldrb r10,[r9,#0] @ FDC status
+ mov r9,#1 @ Got a FIQ flag
+ stmia r8,{r9,r10}
+ subs pc,r14,#4
+
+
+ .global fdc1772_dma_read
+fdc1772_dma_read:
+ mov r8,#IOC_BASE
+ ldrb r9,[r8,#0x34] @ IOC FIQ status
+ tst r9,#1
+ beq fdc1772_dma_read_notours
+ orr r8,r8,#0x10000 @ FDC base
+ ldrb r10,[r8,#0xc] @ Read from FDC data reg (also clears interrupt)
+ ldmia r11,{r8,r9}
+ subs r8,r8,#1 @ One less byte to go
+ @ If there was somewhere for this data to go then store it and update pointers
+ strplb r10,[r9],#1 @ Store the data and increment the pointer
+ stmplia r11,{r8,r9} @ Update count/pointers
+ @ Handle any other interrupts if there are any
+fdc1772_dma_read_notours:
+ @ Cant branch because this code has been copied down to the FIQ vector
+ ldr pc,[pc,#-4]
+ .word fdc1772_comendhandler
+ .global fdc1772_dma_read_end
+fdc1772_dma_read_end:
+
+ .global fdc1772_dma_write
+fdc1772_dma_write:
+ mov r8,#IOC_BASE
+ ldrb r9,[r8,#0x34] @ IOC FIQ status
+ tst r9,#1
+ beq fdc1772_dma_write_notours
+ orr r8,r8,#0x10000 @ FDC base
+ ldmia r11,{r9,r10}
+ subs r9,r9,#1 @ One less byte to go
+ @ If there really is some data then get it, store it and update count
+ ldrplb r12,[r10],#1
+ strplb r12,[r8,#0xc] @ write it to FDC data reg
+ stmplia r11,{r9,r10} @ Update count and pointer - should clear interrupt
+ @ Handle any other interrupts
+fdc1772_dma_write_notours:
+ @ Cant branch because this code has been copied down to the FIQ vector
+ ldr pc,[pc,#-4]
+ .word fdc1772_comendhandler
+
+ .global fdc1772_dma_write_end
+fdc1772_dma_write_end:
+
+
+@ Setup the FIQ R11 to point to the data and store the count, address
+@ for this dma
+@ R0=count
+@ R1=address
+ .global fdc1772_setupdma
+fdc1772_setupdma:
+ @ The big job is flipping in and out of FIQ mode
+ adr r2,fdc1772_fiqdata @ This is what we really came here for
+ stmia r2,{r0,r1}
+ mov r3, pc
+ teqp pc,#0x0c000001 @ Disable FIQs, IRQs and switch to FIQ mode
+ mov r0,r0 @ NOP
+ mov r11,r2
+ teqp r3,#0 @ Normal mode
+ mov r0,r0 @ NOP
+ mov pc,r14
+
diff --git a/drivers/acorn/block/mfm.S b/drivers/acorn/block/mfm.S
new file mode 100644
index 000000000000..c90cbd41ce21
--- /dev/null
+++ b/drivers/acorn/block/mfm.S
@@ -0,0 +1,162 @@
+@ Read/Write DMA code for the ST506/MFM hard drive controllers on the A400 Acorn Archimedes
+@ motherboard and on ST506 expansion podules.
+@ (c) David Alan Gilbert (linux@treblig.org) 1996-1999
+
+#include <asm/assembler.h>
+
+hdc63463_irqdata:
+@ Controller base address
+ .global hdc63463_baseaddress
+hdc63463_baseaddress:
+ .word 0
+
+ .global hdc63463_irqpolladdress
+hdc63463_irqpolladdress:
+ .word 0
+
+ .global hdc63463_irqpollmask
+hdc63463_irqpollmask:
+ .word 0
+
+@ where to read/write data from the kernel data space
+ .global hdc63463_dataptr
+hdc63463_dataptr:
+ .word 0
+
+@ Number of bytes left to transfer
+ .global hdc63463_dataleft
+hdc63463_dataleft:
+ .word 0
+
+@ -------------------------------------------------------------------------
+@ hdc63463_writedma: DMA from host to controller
+@ internal reg usage: r0=hdc base address, r1=irq poll address, r2=poll mask
+@ r3=data ptr, r4=data left, r5,r6=temporary
+ .global hdc63463_writedma
+hdc63463_writedma:
+ stmfd sp!,{r4-r7}
+ adr r5,hdc63463_irqdata
+ ldmia r5,{r0,r1,r2,r3,r4}
+
+writedma_again:
+
+ @ test number of remaining bytes to transfer
+ cmp r4,#0
+ beq writedma_end
+ bmi writedma_end
+
+ @ Check the hdc is interrupting
+ ldrb r5,[r1,#0]
+ tst r5,r2
+ beq writedma_end
+
+ @ Transfer a block of upto 256 bytes
+ cmp r4,#256
+ movlt r7,r4
+ movge r7,#256
+
+ @ Check the hdc is still busy and command has not ended and no errors
+ ldr r5,[r0,#32] @ Status reg - 16 bit - its the top few bits which are status
+ @ think we should continue DMA until it drops busy - perhaps this was
+ @ the main problem with corrected errors causing a hang
+ @tst r5,#0x3c00 @ Test for things which should be off
+ @bne writedma_end
+ and r5,r5,#0x8000 @ This is test for things which should be on: Busy
+ cmp r5,#0x8000
+ bne writedma_end
+
+ @ Bytes remaining at end
+ sub r4,r4,r7
+
+ @ HDC Write register location
+ add r0,r0,#32+8
+
+writedma_loop:
+ @ OK - pretty sure we should be doing this
+
+ ldr r5,[r3],#4 @ Get a word to be written
+ @ get bottom half to be sent first
+ mov r6,r5,lsl#16 @ Separate the first 2 bytes
+ orr r2,r6,r6,lsr #16 @ Duplicate them in the bottom half of the word
+ @ now the top half
+ mov r6,r5,lsr#16 @ Get 2nd 2 bytes
+ orr r6,r6,r6,lsl#16 @ Duplicate
+ @str r6,[r0] @ to hdc
+ stmia r0,{r2,r6}
+ subs r7,r7,#4 @ Dec. number of bytes left
+ bne writedma_loop
+
+ @ If we were too slow we had better go through again - DAG - took out with new interrupt routine
+ @ sub r0,r0,#32+8
+ @ adr r2,hdc63463_irqdata
+ @ ldr r2,[r2,#8]
+ @ b writedma_again
+
+writedma_end:
+ adr r5,hdc63463_irqdata+12
+ stmia r5,{r3,r4}
+ ldmfd sp!,{r4-r7}
+ RETINSTR(mov,pc,lr)
+
+@ -------------------------------------------------------------------------
+@ hdc63463_readdma: DMA from controller to host
+@ internal reg usage: r0=hdc base address, r1=irq poll address, r2=poll mask
+@ r3=data ptr, r4=data left, r5,r6=temporary
+ .global hdc63463_readdma
+hdc63463_readdma:
+ stmfd sp!,{r4-r7}
+ adr r5,hdc63463_irqdata
+ ldmia r5,{r0,r1,r2,r3,r4}
+
+readdma_again:
+ @ test number of remaining bytes to transfer
+ cmp r4,#0
+ beq readdma_end
+ bmi readdma_end
+
+ @ Check the hdc is interrupting
+ ldrb r5,[r1,#0]
+ tst r5,r2
+ beq readdma_end
+
+ @ Check the hdc is still busy and command has not ended and no errors
+ ldr r5,[r0,#32] @ Status reg - 16 bit - its the top few bits which are status
+ @ think we should continue DMA until it drops busy - perhaps this was
+ @ the main problem with corrected errors causing a hang
+ @tst r5,#0x3c00 @ Test for things which should be off
+ @bne readdma_end
+ and r5,r5,#0x8000 @ This is test for things which should be on: Busy
+ cmp r5,#0x8000
+ bne readdma_end
+
+ @ Transfer a block of upto 256 bytes
+ cmp r4,#256
+ movlt r7,r4
+ movge r7,#256
+
+ @ Bytes remaining at end
+ sub r4,r4,r7
+
+ @ Set a pointer to the data register in the HDC
+ add r0,r0,#8
+readdma_loop:
+ @ OK - pretty sure we should be doing this
+ ldmia r0,{r5,r6}
+ mov r5,r5,lsl#16
+ mov r6,r6,lsl#16
+ orr r6,r6,r5,lsr #16
+ str r6,[r3],#4
+ subs r7,r7,#4 @ Decrement bytes to go
+ bne readdma_loop
+
+ @ Try reading multiple blocks - if this was fast enough then I do not think
+ @ this should help - NO taken out DAG - new interrupt handler has
+ @ non-consecutive memory blocks
+ @ sub r0,r0,#8
+ @ b readdma_again
+
+readdma_end:
+ adr r5,hdc63463_irqdata+12
+ stmia r5,{r3,r4}
+ ldmfd sp!,{r4-r7}
+ RETINSTR(mov,pc,lr)
diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c
new file mode 100644
index 000000000000..4b65f74d66b1
--- /dev/null
+++ b/drivers/acorn/block/mfmhd.c
@@ -0,0 +1,1416 @@
+/*
+ * linux/arch/arm/drivers/block/mfmhd.c
+ *
+ * Copyright (C) 1995, 1996 Russell King, Dave Alan Gilbert (gilbertd@cs.man.ac.uk)
+ *
+ * MFM hard drive code [experimental]
+ */
+
+/*
+ * Change list:
+ *
+ * 3/2/96:DAG: Started a change list :-)
+ * Set the hardsect_size pointers up since we are running 256 byte
+ * sectors
+ * Added DMA code, put it into the rw_intr
+ * Moved RCAL out of generic interrupt code - don't want to do it
+ * while DMA'ing - its now in individual handlers.
+ * Took interrupt handlers off task queue lists and called
+ * directly - not sure of implications.
+ *
+ * 18/2/96:DAG: Well its reading OK I think, well enough for image file code
+ * to find the image file; but now I've discovered that I actually
+ * have to put some code in for image files.
+ *
+ * Added stuff for image files; seems to work, but I've not
+ * got a multisegment image file (I don't think!).
+ * Put in a hack (yep a real hack) for multiple cylinder reads.
+ * Not convinced its working.
+ *
+ * 5/4/96:DAG: Added asm/hardware.h and use IOC_ macros
+ * Rewrote dma code in mfm.S (again!) - now takes a word at a time
+ * from main RAM for speed; still doesn't feel speedy!
+ *
+ * 20/4/96:DAG: After rewriting mfm.S a heck of a lot of times and speeding
+ * things up, I've finally figured out why its so damn slow.
+ * Linux is only reading a block at a time, and so you never
+ * get more than 1K per disc revoloution ~=60K/second.
+ *
+ * 27/4/96:DAG: On Russell's advice I change ll_rw_blk.c to ask it to
+ * join adjacent blocks together. Everything falls flat on its
+ * face.
+ * Four hours of debugging later; I hadn't realised that
+ * ll_rw_blk would be so generous as to join blocks whose
+ * results aren't going into consecutive buffers.
+ *
+ * OK; severe rehacking of mfm_rw_interrupt; now end_request's
+ * as soon as its DMA'd each request. Odd thing is that
+ * we are sometimes getting interrupts where we are not transferring
+ * any data; why? Is that what happens when you miss? I doubt
+ * it; are we too fast? No - its just at command ends. Got 240K/s
+ * better than before, but RiscOS hits 480K/s
+ *
+ * 25/6/96:RMK: Fixed init code to allow the MFM podule to work. Increased the
+ * number of errors for my Miniscribe drive (8425).
+ *
+ * 30/6/96:DAG: Russell suggested that a check drive 0 might turn the LEDs off
+ * - so in request_done just before it clears Busy it sends a
+ * check drive 0 - and the LEDs go off!!!!
+ *
+ * Added test for mainboard controller. - Removes need for separate
+ * define.
+ *
+ * 13/7/96:DAG: Changed hardware sectore size to 512 in attempt to make
+ * IM drivers work.
+ * 21/7/96:DAG: Took out old image file stuff (accessing it now produces an IO
+ * error.)
+ *
+ * 17/8/96:DAG: Ran through indent -kr -i8; evil - all my nice 2 character indents
+ * gone :-( Hand modified afterwards.
+ * Took out last remains of the older image map system.
+ *
+ * 22/9/96:DAG: Changed mfm.S so it will carry on DMA'ing til; BSY is dropped
+ * Changed mfm_rw_intr so that it doesn't follow the error
+ * code until BSY is dropped. Nope - still broke. Problem
+ * may revolve around when it reads the results for the error
+ * number?
+ *
+ *16/11/96:DAG: Modified for 2.0.18; request_irq changed
+ *
+ *17/12/96:RMK: Various cleanups, reorganisation, and the changes for new IO system.
+ * Improved probe for onboard MFM chip - it was hanging on my A5k.
+ * Added autodetect CHS code such that we don't rely on the presence
+ * of an ADFS boot block. Added ioport resource manager calls so
+ * that we don't clash with already-running hardware (eg. RiscPC Ether
+ * card slots if someone tries this)!
+ *
+ * 17/1/97:RMK: Upgraded to 2.1 kernels.
+ *
+ * 4/3/98:RMK: Changed major number to 21.
+ *
+ * 27/6/98:RMK: Changed asm/delay.h to linux/delay.h for mdelay().
+ */
+
+/*
+ * Possible enhancements:
+ * Multi-thread the code so that it is possible that while one drive
+ * is seeking, the other one can be reading data/seeking as well.
+ * This would be a performance boost with dual drive systems.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/genhd.h>
+#include <linux/major.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/blkpg.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/ecard.h>
+#include <asm/hardware/ioc.h>
+
+static void (*do_mfm)(void) = NULL;
+static struct request_queue *mfm_queue;
+static DEFINE_SPINLOCK(mfm_lock);
+
+#define MAJOR_NR MFM_ACORN_MAJOR
+#define QUEUE (mfm_queue)
+#define CURRENT elv_next_request(mfm_queue)
+/*
+ * This sort of stuff should be in a header file shared with ide.c, hd.c, xd.c etc
+ */
+#ifndef HDIO_GETGEO
+#define HDIO_GETGEO 0x301
+struct hd_geometry {
+ unsigned char heads;
+ unsigned char sectors;
+ unsigned short cylinders;
+ unsigned long start;
+};
+#endif
+
+
+/*
+ * Configuration section
+ *
+ * This is the maximum number of drives that we accept
+ */
+#define MFM_MAXDRIVES 2
+/*
+ * Linux I/O address of onboard MFM controller or 0 to disable this
+ */
+#define ONBOARD_MFM_ADDRESS ((0x002d0000 >> 2) | 0x80000000)
+/*
+ * Uncomment this to enable debugging in the MFM driver...
+ */
+#ifndef DEBUG
+/*#define DEBUG */
+#endif
+/*
+ * End of configuration
+ */
+
+
+/*
+ * This structure contains all information to do with a particular physical
+ * device.
+ */
+struct mfm_info {
+ unsigned char sectors;
+ unsigned char heads;
+ unsigned short cylinders;
+ unsigned short lowcurrent;
+ unsigned short precomp;
+#define NO_TRACK -1
+#define NEED_1_RECAL -2
+#define NEED_2_RECAL -3
+ int cylinder;
+ struct {
+ char recal;
+ char report;
+ char abort;
+ } errors;
+} mfm_info[MFM_MAXDRIVES];
+
+#define MFM_DRV_INFO mfm_info[raw_cmd.dev]
+
+/* Stuff from the assembly routines */
+extern unsigned int hdc63463_baseaddress; /* Controller base address */
+extern unsigned int hdc63463_irqpolladdress; /* Address to read to test for int */
+extern unsigned int hdc63463_irqpollmask; /* Mask for irq register */
+extern unsigned int hdc63463_dataptr; /* Pointer to kernel data space to DMA */
+extern int hdc63463_dataleft; /* Number of bytes left to transfer */
+
+
+
+
+static int lastspecifieddrive;
+static unsigned Busy;
+
+static unsigned int PartFragRead; /* The number of sectors which have been read
+ during a partial read split over two
+ cylinders. If 0 it means a partial
+ read did not occur. */
+
+static unsigned int PartFragRead_RestartBlock; /* Where to restart on a split access */
+static unsigned int PartFragRead_SectorsLeft; /* Where to restart on a split access */
+
+static int Sectors256LeftInCurrent; /* i.e. 256 byte sectors left in current */
+static int SectorsLeftInRequest; /* i.e. blocks left in the thing mfm_request was called for */
+static int Copy_Sector; /* The 256 byte sector we are currently at - fragments need to know
+ where to take over */
+static char *Copy_buffer;
+
+
+static void mfm_seek(void);
+static void mfm_rerequest(void);
+static void mfm_request(void);
+static void mfm_specify (void);
+static void issue_request(unsigned int block, unsigned int nsect,
+ struct request *req);
+
+static unsigned int mfm_addr; /* Controller address */
+static unsigned int mfm_IRQPollLoc; /* Address to read for IRQ information */
+static unsigned int mfm_irqenable; /* Podule IRQ enable location */
+static unsigned char mfm_irq; /* Interrupt number */
+static int mfm_drives = 0; /* drives available */
+static int mfm_status = 0; /* interrupt status */
+static int *errors;
+
+static struct rawcmd {
+ unsigned int dev;
+ unsigned int cylinder;
+ unsigned int head;
+ unsigned int sector;
+ unsigned int cmdtype;
+ unsigned int cmdcode;
+ unsigned char cmddata[16];
+ unsigned int cmdlen;
+} raw_cmd;
+
+static unsigned char result[16];
+
+static struct cont {
+ void (*interrupt) (void); /* interrupt handler */
+ void (*error) (void); /* error handler */
+ void (*redo) (void); /* redo handler */
+ void (*done) (int st); /* done handler */
+} *cont = NULL;
+
+#if 0
+static struct tq_struct mfm_tq = {0, 0, (void (*)(void *)) NULL, 0};
+#endif
+
+int number_mfm_drives = 1;
+
+/* ------------------------------------------------------------------------------------------ */
+/*
+ * From the HD63463 data sheet from Hitachi Ltd.
+ */
+
+#define MFM_COMMAND (mfm_addr + 0)
+#define MFM_DATAOUT (mfm_addr + 1)
+#define MFM_STATUS (mfm_addr + 8)
+#define MFM_DATAIN (mfm_addr + 9)
+
+#define CMD_ABT 0xF0 /* Abort */
+#define CMD_SPC 0xE8 /* Specify */
+#define CMD_TST 0xE0 /* Test */
+#define CMD_RCLB 0xC8 /* Recalibrate */
+#define CMD_SEK 0xC0 /* Seek */
+#define CMD_WFS 0xAB /* Write Format Skew */
+#define CMD_WFM 0xA3 /* Write Format */
+#define CMD_MTB 0x90 /* Memory to buffer */
+#define CMD_CMPD 0x88 /* Compare data */
+#define CMD_WD 0x87 /* Write data */
+#define CMD_RED 0x70 /* Read erroneous data */
+#define CMD_RIS 0x68 /* Read ID skew */
+#define CMD_FID 0x61 /* Find ID */
+#define CMD_RID 0x60 /* Read ID */
+#define CMD_BTM 0x50 /* Buffer to memory */
+#define CMD_CKD 0x48 /* Check data */
+#define CMD_RD 0x40 /* Read data */
+#define CMD_OPBW 0x38 /* Open buffer write */
+#define CMD_OPBR 0x30 /* Open buffer read */
+#define CMD_CKV 0x28 /* Check drive */
+#define CMD_CKE 0x20 /* Check ECC */
+#define CMD_POD 0x18 /* Polling disable */
+#define CMD_POL 0x10 /* Polling enable */
+#define CMD_RCAL 0x08 /* Recall */
+
+#define STAT_BSY 0x8000 /* Busy */
+#define STAT_CPR 0x4000 /* Command Parameter Rejection */
+#define STAT_CED 0x2000 /* Command end */
+#define STAT_SED 0x1000 /* Seek end */
+#define STAT_DER 0x0800 /* Drive error */
+#define STAT_ABN 0x0400 /* Abnormal end */
+#define STAT_POL 0x0200 /* Polling */
+
+/* ------------------------------------------------------------------------------------------ */
+#ifdef DEBUG
+static void console_printf(const char *fmt,...)
+{
+ static char buffer[2048]; /* Arbitary! */
+ extern void console_print(const char *);
+ unsigned long flags;
+ va_list ap;
+
+ local_irq_save(flags);
+
+ va_start(ap, fmt);
+ vsprintf(buffer, fmt, ap);
+ console_print(buffer);
+ va_end(fmt);
+
+ local_irq_restore(flags);
+}; /* console_printf */
+
+#define DBG(x...) console_printf(x)
+#else
+#define DBG(x...)
+#endif
+
+static void print_status(void)
+{
+ char *error;
+ static char *errors[] = {
+ "no error",
+ "command aborted",
+ "invalid command",
+ "parameter error",
+ "not initialised",
+ "rejected TEST",
+ "no useld",
+ "write fault",
+ "not ready",
+ "no scp",
+ "in seek",
+ "invalid NCA",
+ "invalid step rate",
+ "seek error",
+ "over run",
+ "invalid PHA",
+ "data field EEC error",
+ "data field CRC error",
+ "error corrected",
+ "data field fatal error",
+ "no data am",
+ "not hit",
+ "ID field CRC error",
+ "time over",
+ "no ID am",
+ "not writable"
+ };
+ if (result[1] < 0x65)
+ error = errors[result[1] >> 2];
+ else
+ error = "unknown";
+ printk("(");
+ if (mfm_status & STAT_BSY) printk("BSY ");
+ if (mfm_status & STAT_CPR) printk("CPR ");
+ if (mfm_status & STAT_CED) printk("CED ");
+ if (mfm_status & STAT_SED) printk("SED ");
+ if (mfm_status & STAT_DER) printk("DER ");
+ if (mfm_status & STAT_ABN) printk("ABN ");
+ if (mfm_status & STAT_POL) printk("POL ");
+ printk(") SSB = %X (%s)\n", result[1], error);
+
+}
+
+/* ------------------------------------------------------------------------------------- */
+
+static void issue_command(int command, unsigned char *cmdb, int len)
+{
+ int status;
+#ifdef DEBUG
+ int i;
+ console_printf("issue_command: %02X: ", command);
+ for (i = 0; i < len; i++)
+ console_printf("%02X ", cmdb[i]);
+ console_printf("\n");
+#endif
+
+ do {
+ status = inw(MFM_STATUS);
+ } while (status & (STAT_BSY | STAT_POL));
+ DBG("issue_command: status after pol/bsy loop: %02X:\n ", status >> 8);
+
+ if (status & (STAT_CPR | STAT_CED | STAT_SED | STAT_DER | STAT_ABN)) {
+ outw(CMD_RCAL, MFM_COMMAND);
+ while (inw(MFM_STATUS) & STAT_BSY);
+ }
+ status = inw(MFM_STATUS);
+ DBG("issue_command: status before parameter issue: %02X:\n ", status >> 8);
+
+ while (len > 0) {
+ outw(cmdb[1] | (cmdb[0] << 8), MFM_DATAOUT);
+ len -= 2;
+ cmdb += 2;
+ }
+ status = inw(MFM_STATUS);
+ DBG("issue_command: status before command issue: %02X:\n ", status >> 8);
+
+ outw(command, MFM_COMMAND);
+ status = inw(MFM_STATUS);
+ DBG("issue_command: status immediately after command issue: %02X:\n ", status >> 8);
+}
+
+static void wait_for_completion(void)
+{
+ while ((mfm_status = inw(MFM_STATUS)) & STAT_BSY);
+}
+
+static void wait_for_command_end(void)
+{
+ int i;
+
+ while (!((mfm_status = inw(MFM_STATUS)) & STAT_CED));
+
+ for (i = 0; i < 16;) {
+ int in;
+ in = inw(MFM_DATAIN);
+ result[i++] = in >> 8;
+ result[i++] = in;
+ }
+ outw (CMD_RCAL, MFM_COMMAND);
+}
+
+/* ------------------------------------------------------------------------------------- */
+
+static void mfm_rw_intr(void)
+{
+ int old_status; /* Holds status on entry, we read to see if the command just finished */
+#ifdef DEBUG
+ console_printf("mfm_rw_intr...dataleft=%d\n", hdc63463_dataleft);
+ print_status();
+#endif
+
+ /* Now don't handle the error until BSY drops */
+ if ((mfm_status & (STAT_DER | STAT_ABN)) && ((mfm_status&STAT_BSY)==0)) {
+ /* Something has gone wrong - let's try that again */
+ outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
+ if (cont) {
+ DBG("mfm_rw_intr: DER/ABN err\n");
+ cont->error();
+ cont->redo();
+ };
+ return;
+ };
+
+ /* OK so what ever happened it's not an error, now I reckon we are left between
+ a choice of command end or some data which is ready to be collected */
+ /* I think we have to transfer data while the interrupt line is on and its
+ not any other type of interrupt */
+ if (CURRENT->cmd == WRITE) {
+ extern void hdc63463_writedma(void);
+ if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
+ printk("mfm_rw_intr: Apparent DMA write request when no more to DMA\n");
+ if (cont) {
+ cont->error();
+ cont->redo();
+ };
+ return;
+ };
+ hdc63463_writedma();
+ } else {
+ extern void hdc63463_readdma(void);
+ if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
+ printk("mfm_rw_intr: Apparent DMA read request when no more to DMA\n");
+ if (cont) {
+ cont->error();
+ cont->redo();
+ };
+ return;
+ };
+ DBG("Going to try read dma..............status=0x%x, buffer=%p\n", mfm_status, hdc63463_dataptr);
+ hdc63463_readdma();
+ }; /* Read */
+
+ if (hdc63463_dataptr != ((unsigned int) Copy_buffer + 256)) {
+ /* If we didn't actually manage to get any data on this interrupt - but why? We got the interrupt */
+ /* Ah - well looking at the status its just when we get command end; so no problem */
+ /*console_printf("mfm: dataptr mismatch. dataptr=0x%08x Copy_buffer+256=0x%08p\n",
+ hdc63463_dataptr,Copy_buffer+256);
+ print_status(); */
+ } else {
+ Sectors256LeftInCurrent--;
+ Copy_buffer += 256;
+ Copy_Sector++;
+
+ /* We have come to the end of this request */
+ if (!Sectors256LeftInCurrent) {
+ DBG("mfm: end_request for CURRENT=0x%p CURRENT(sector=%d current_nr_sectors=%d nr_sectors=%d)\n",
+ CURRENT, CURRENT->sector, CURRENT->current_nr_sectors, CURRENT->nr_sectors);
+
+ CURRENT->nr_sectors -= CURRENT->current_nr_sectors;
+ CURRENT->sector += CURRENT->current_nr_sectors;
+ SectorsLeftInRequest -= CURRENT->current_nr_sectors;
+
+ end_request(CURRENT, 1);
+ if (SectorsLeftInRequest) {
+ hdc63463_dataptr = (unsigned int) CURRENT->buffer;
+ Copy_buffer = CURRENT->buffer;
+ Sectors256LeftInCurrent = CURRENT->current_nr_sectors * 2;
+ errors = &(CURRENT->errors);
+ /* These should match the present calculations of the next logical sector
+ on the device
+ Copy_Sector=CURRENT->sector*2; */
+
+ if (Copy_Sector != CURRENT->sector * 2)
+#ifdef DEBUG
+ /*console_printf*/printk("mfm: Copy_Sector mismatch. Copy_Sector=%d CURRENT->sector*2=%d\n",
+ Copy_Sector, CURRENT->sector * 2);
+#else
+ printk("mfm: Copy_Sector mismatch! Eek!\n");
+#endif
+ }; /* CURRENT */
+ }; /* Sectors256LeftInCurrent */
+ };
+
+ old_status = mfm_status;
+ mfm_status = inw(MFM_STATUS);
+ if (mfm_status & (STAT_DER | STAT_ABN)) {
+ /* Something has gone wrong - let's try that again */
+ if (cont) {
+ DBG("mfm_rw_intr: DER/ABN error\n");
+ cont->error();
+ cont->redo();
+ };
+ return;
+ };
+
+ /* If this code wasn't entered due to command_end but there is
+ now a command end we must read the command results out. If it was
+ entered like this then mfm_interrupt_handler would have done the
+ job. */
+ if ((!((old_status & (STAT_CPR | STAT_BSY)) == STAT_CPR)) &&
+ ((mfm_status & (STAT_CPR | STAT_BSY)) == STAT_CPR)) {
+ int len = 0;
+ while (len < 16) {
+ int in;
+ in = inw(MFM_DATAIN);
+ result[len++] = in >> 8;
+ result[len++] = in;
+ };
+ }; /* Result read */
+
+ /*console_printf ("mfm_rw_intr nearexit [%02X]\n", __raw_readb(mfm_IRQPollLoc)); */
+
+ /* If end of command move on */
+ if (mfm_status & (STAT_CED)) {
+ outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
+ /* End of command - trigger the next command */
+ if (cont) {
+ cont->done(1);
+ }
+ DBG("mfm_rw_intr: returned from cont->done\n");
+ } else {
+ /* Its going to generate another interrupt */
+ do_mfm = mfm_rw_intr;
+ };
+}
+
+static void mfm_setup_rw(void)
+{
+ DBG("setting up for rw...\n");
+
+ do_mfm = mfm_rw_intr;
+ issue_command(raw_cmd.cmdcode, raw_cmd.cmddata, raw_cmd.cmdlen);
+}
+
+static void mfm_recal_intr(void)
+{
+#ifdef DEBUG
+ console_printf("recal intr - status = ");
+ print_status();
+#endif
+ outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
+ if (mfm_status & (STAT_DER | STAT_ABN)) {
+ printk("recal failed\n");
+ MFM_DRV_INFO.cylinder = NEED_2_RECAL;
+ if (cont) {
+ cont->error();
+ cont->redo();
+ }
+ return;
+ }
+ /* Thats seek end - we are finished */
+ if (mfm_status & STAT_SED) {
+ issue_command(CMD_POD, NULL, 0);
+ MFM_DRV_INFO.cylinder = 0;
+ mfm_seek();
+ return;
+ }
+ /* Command end without seek end (see data sheet p.20) for parallel seek
+ - we have to send a POL command to wait for the seek */
+ if (mfm_status & STAT_CED) {
+ do_mfm = mfm_recal_intr;
+ issue_command(CMD_POL, NULL, 0);
+ return;
+ }
+ printk("recal: unknown status\n");
+}
+
+static void mfm_seek_intr(void)
+{
+#ifdef DEBUG
+ console_printf("seek intr - status = ");
+ print_status();
+#endif
+ outw(CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
+ if (mfm_status & (STAT_DER | STAT_ABN)) {
+ printk("seek failed\n");
+ MFM_DRV_INFO.cylinder = NEED_2_RECAL;
+ if (cont) {
+ cont->error();
+ cont->redo();
+ }
+ return;
+ }
+ if (mfm_status & STAT_SED) {
+ issue_command(CMD_POD, NULL, 0);
+ MFM_DRV_INFO.cylinder = raw_cmd.cylinder;
+ mfm_seek();
+ return;
+ }
+ if (mfm_status & STAT_CED) {
+ do_mfm = mfm_seek_intr;
+ issue_command(CMD_POL, NULL, 0);
+ return;
+ }
+ printk("seek: unknown status\n");
+}
+
+/* IDEA2 seems to work better - its what RiscOS sets my
+ * disc to - on its SECOND call to specify!
+ */
+#define IDEA2
+#ifndef IDEA2
+#define SPEC_SL 0x16
+#define SPEC_SH 0xa9 /* Step pulse high=21, Record Length=001 (256 bytes) */
+#else
+#define SPEC_SL 0x00 /* OM2 - SL - step pulse low */
+#define SPEC_SH 0x21 /* Step pulse high=4, Record Length=001 (256 bytes) */
+#endif
+
+static void mfm_setupspecify (int drive, unsigned char *cmdb)
+{
+ cmdb[0] = 0x1f; /* OM0 - !SECT,!MOD,!DIF,PADP,ECD,CRCP,CRCI,ACOR */
+ cmdb[1] = 0xc3; /* OM1 - DTM,BRST,!CEDM,!SEDM,!DERM,0,AMEX,PSK */
+ cmdb[2] = SPEC_SL; /* OM2 - SL - step pulse low */
+ cmdb[3] = (number_mfm_drives == 1) ? 0x02 : 0x06; /* 1 or 2 drives */
+ cmdb[4] = 0xfc | ((mfm_info[drive].cylinders - 1) >> 8);/* RW time over/high part of number of cylinders */
+ cmdb[5] = mfm_info[drive].cylinders - 1; /* low part of number of cylinders */
+ cmdb[6] = mfm_info[drive].heads - 1; /* Number of heads */
+ cmdb[7] = mfm_info[drive].sectors - 1; /* Number of sectors */
+ cmdb[8] = SPEC_SH;
+ cmdb[9] = 0x0a; /* gap length 1 */
+ cmdb[10] = 0x0d; /* gap length 2 */
+ cmdb[11] = 0x0c; /* gap length 3 */
+ cmdb[12] = (mfm_info[drive].precomp - 1) >> 8; /* pre comp cylinder */
+ cmdb[13] = mfm_info[drive].precomp - 1;
+ cmdb[14] = (mfm_info[drive].lowcurrent - 1) >> 8; /* Low current cylinder */
+ cmdb[15] = mfm_info[drive].lowcurrent - 1;
+}
+
+static void mfm_specify (void)
+{
+ unsigned char cmdb[16];
+
+ DBG("specify...dev=%d lastspecified=%d\n", raw_cmd.dev, lastspecifieddrive);
+ mfm_setupspecify (raw_cmd.dev, cmdb);
+
+ issue_command (CMD_SPC, cmdb, 16);
+ /* Ensure that we will do another specify if we move to the other drive */
+ lastspecifieddrive = raw_cmd.dev;
+ wait_for_completion();
+}
+
+static void mfm_seek(void)
+{
+ unsigned char cmdb[4];
+
+ DBG("seeking...\n");
+ if (MFM_DRV_INFO.cylinder < 0) {
+ do_mfm = mfm_recal_intr;
+ DBG("mfm_seek: about to call specify\n");
+ mfm_specify (); /* DAG added this */
+
+ cmdb[0] = raw_cmd.dev + 1;
+ cmdb[1] = 0;
+
+ issue_command(CMD_RCLB, cmdb, 2);
+ return;
+ }
+ if (MFM_DRV_INFO.cylinder != raw_cmd.cylinder) {
+ cmdb[0] = raw_cmd.dev + 1;
+ cmdb[1] = 0; /* raw_cmd.head; DAG: My data sheet says this should be 0 */
+ cmdb[2] = raw_cmd.cylinder >> 8;
+ cmdb[3] = raw_cmd.cylinder;
+
+ do_mfm = mfm_seek_intr;
+ issue_command(CMD_SEK, cmdb, 4);
+ } else
+ mfm_setup_rw();
+}
+
+static void mfm_initialise(void)
+{
+ DBG("init...\n");
+ mfm_seek();
+}
+
+static void request_done(int uptodate)
+{
+ DBG("mfm:request_done\n");
+ if (uptodate) {
+ unsigned char block[2] = {0, 0};
+
+ /* Apparently worked - let's check bytes left to DMA */
+ if (hdc63463_dataleft != (PartFragRead_SectorsLeft * 256)) {
+ printk("mfm: request_done - dataleft=%d - should be %d - Eek!\n", hdc63463_dataleft, PartFragRead_SectorsLeft * 256);
+ end_request(CURRENT, 0);
+ Busy = 0;
+ };
+ /* Potentially this means that we've done; but we might be doing
+ a partial access, (over two cylinders) or we may have a number
+ of fragments in an image file. First let's deal with partial accesss
+ */
+ if (PartFragRead) {
+ /* Yep - a partial access */
+
+ /* and issue the remainder */
+ issue_request(PartFragRead_RestartBlock, PartFragRead_SectorsLeft, CURRENT);
+ return;
+ }
+
+ /* ah well - perhaps there is another fragment to go */
+
+ /* Increment pointers/counts to start of next fragment */
+ if (SectorsLeftInRequest > 0) printk("mfm: SectorsLeftInRequest>0 - Eek! Shouldn't happen!\n");
+
+ /* No - its the end of the line */
+ /* end_request's should have happened at the end of sector DMAs */
+ /* Turns Drive LEDs off - may slow it down? */
+ if (!elv_next_request(QUEUE))
+ issue_command(CMD_CKV, block, 2);
+
+ Busy = 0;
+ DBG("request_done: About to mfm_request\n");
+ /* Next one please */
+ mfm_request(); /* Moved from mfm_rw_intr */
+ DBG("request_done: returned from mfm_request\n");
+ } else {
+ printk("mfm:request_done: update=0\n");
+ end_request(CURRENT, 0);
+ Busy = 0;
+ }
+}
+
+static void error_handler(void)
+{
+ printk("error detected... status = ");
+ print_status();
+ (*errors)++;
+ if (*errors > MFM_DRV_INFO.errors.abort)
+ cont->done(0);
+ if (*errors > MFM_DRV_INFO.errors.recal)
+ MFM_DRV_INFO.cylinder = NEED_2_RECAL;
+}
+
+static void rw_interrupt(void)
+{
+ printk("rw_interrupt\n");
+}
+
+static struct cont rw_cont =
+{
+ rw_interrupt,
+ error_handler,
+ mfm_rerequest,
+ request_done
+};
+
+/*
+ * Actually gets round to issuing the request - note everything at this
+ * point is in 256 byte sectors not Linux 512 byte blocks
+ */
+static void issue_request(unsigned int block, unsigned int nsect,
+ struct request *req)
+{
+ struct gendisk *disk = req->rq_disk;
+ struct mfm_info *p = disk->private_data;
+ int track, start_head, start_sector;
+ int sectors_to_next_cyl;
+ dev = p - mfm_info;
+
+ track = block / p->sectors;
+ start_sector = block % p->sectors;
+ start_head = track % p->heads;
+
+ /* First get the number of whole tracks which are free before the next
+ track */
+ sectors_to_next_cyl = (p->heads - (start_head + 1)) * p->sectors;
+ /* Then add in the number of sectors left on this track */
+ sectors_to_next_cyl += (p->sectors - start_sector);
+
+ DBG("issue_request: mfm_info[dev].sectors=%d track=%d\n", p->sectors, track);
+
+ raw_cmd.dev = dev;
+ raw_cmd.sector = start_sector;
+ raw_cmd.head = start_head;
+ raw_cmd.cylinder = track / p->heads;
+ raw_cmd.cmdtype = CURRENT->cmd;
+ raw_cmd.cmdcode = CURRENT->cmd == WRITE ? CMD_WD : CMD_RD;
+ raw_cmd.cmddata[0] = dev + 1; /* DAG: +1 to get US */
+ raw_cmd.cmddata[1] = raw_cmd.head;
+ raw_cmd.cmddata[2] = raw_cmd.cylinder >> 8;
+ raw_cmd.cmddata[3] = raw_cmd.cylinder;
+ raw_cmd.cmddata[4] = raw_cmd.head;
+ raw_cmd.cmddata[5] = raw_cmd.sector;
+
+ /* Was == and worked - how the heck??? */
+ if (lastspecifieddrive != raw_cmd.dev)
+ mfm_specify ();
+
+ if (nsect <= sectors_to_next_cyl) {
+ raw_cmd.cmddata[6] = nsect >> 8;
+ raw_cmd.cmddata[7] = nsect;
+ PartFragRead = 0; /* All in one */
+ PartFragRead_SectorsLeft = 0; /* Must set this - used in DMA calcs */
+ } else {
+ raw_cmd.cmddata[6] = sectors_to_next_cyl >> 8;
+ raw_cmd.cmddata[7] = sectors_to_next_cyl;
+ PartFragRead = sectors_to_next_cyl; /* only do this many this time */
+ PartFragRead_RestartBlock = block + sectors_to_next_cyl; /* Where to restart from */
+ PartFragRead_SectorsLeft = nsect - sectors_to_next_cyl;
+ }
+ raw_cmd.cmdlen = 8;
+
+ /* Setup DMA pointers */
+ hdc63463_dataptr = (unsigned int) Copy_buffer;
+ hdc63463_dataleft = nsect * 256; /* Better way? */
+
+ DBG("mfm%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx (%p)\n",
+ raw_cmd.dev + 'a', (CURRENT->cmd == READ) ? "read" : "writ",
+ raw_cmd.cylinder,
+ raw_cmd.head,
+ raw_cmd.sector, nsect, (unsigned long) Copy_buffer, CURRENT);
+
+ cont = &rw_cont;
+ errors = &(CURRENT->errors);
+#if 0
+ mfm_tq.routine = (void (*)(void *)) mfm_initialise;
+ queue_task(&mfm_tq, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+#else
+ mfm_initialise();
+#endif
+} /* issue_request */
+
+/*
+ * Called when an error has just happened - need to trick mfm_request
+ * into thinking we weren't busy
+ *
+ * Turn off ints - mfm_request expects them this way
+ */
+static void mfm_rerequest(void)
+{
+ DBG("mfm_rerequest\n");
+ cli();
+ Busy = 0;
+ mfm_request();
+}
+
+static struct gendisk *mfm_gendisk[2];
+
+static void mfm_request(void)
+{
+ DBG("mfm_request CURRENT=%p Busy=%d\n", CURRENT, Busy);
+
+ /* If we are still processing then return; we will get called again */
+ if (Busy) {
+ /* Again seems to be common in 1.3.45 */
+ /*DBG*/printk("mfm_request: Exiting due to busy\n");
+ return;
+ }
+ Busy = 1;
+
+ while (1) {
+ unsigned int block, nsect;
+ struct gendisk *disk;
+
+ DBG("mfm_request: loop start\n");
+ sti();
+
+ DBG("mfm_request: before !CURRENT\n");
+
+ if (!CURRENT) {
+ printk("mfm_request: Exiting due to empty queue (pre)\n");
+ do_mfm = NULL;
+ Busy = 0;
+ return;
+ }
+
+ DBG("mfm_request: before arg extraction\n");
+
+ disk = CURRENT->rq_disk;
+ block = CURRENT->sector;
+ nsect = CURRENT->nr_sectors;
+ if (block >= get_capacity(disk) ||
+ block+nsect > get_capacity(disk)) {
+ printk("%s: bad access: block=%d, count=%d, nr_sects=%ld\n",
+ disk->disk_name, block, nsect, get_capacity(disk));
+ printk("mfm: continue 1\n");
+ end_request(CURRENT, 0);
+ Busy = 0;
+ continue;
+ }
+
+ /* DAG: Linux doesn't cope with this - even though it has an array telling
+ it the hardware block size - silly */
+ block <<= 1; /* Now in 256 byte sectors */
+ nsect <<= 1; /* Ditto */
+
+ SectorsLeftInRequest = nsect >> 1;
+ Sectors256LeftInCurrent = CURRENT->current_nr_sectors * 2;
+ Copy_buffer = CURRENT->buffer;
+ Copy_Sector = CURRENT->sector << 1;
+
+ DBG("mfm_request: block after offset=%d\n", block);
+
+ if (CURRENT->cmd != READ && CURRENT->cmd != WRITE) {
+ printk("unknown mfm-command %d\n", CURRENT->cmd);
+ end_request(CURRENT, 0);
+ Busy = 0;
+ printk("mfm: continue 4\n");
+ continue;
+ }
+ issue_request(block, nsect, CURRENT);
+
+ break;
+ }
+ DBG("mfm_request: Dropping out bottom\n");
+}
+
+static void do_mfm_request(request_queue_t *q)
+{
+ DBG("do_mfm_request: about to mfm_request\n");
+ mfm_request();
+}
+
+static void mfm_interrupt_handler(int unused, void *dev_id, struct pt_regs *regs)
+{
+ void (*handler) (void) = do_mfm;
+
+ do_mfm = NULL;
+
+ DBG("mfm_interrupt_handler (handler=0x%p)\n", handler);
+
+ mfm_status = inw(MFM_STATUS);
+
+ /* If CPR (Command Parameter Reject) and not busy it means that the command
+ has some return message to give us */
+ if ((mfm_status & (STAT_CPR | STAT_BSY)) == STAT_CPR) {
+ int len = 0;
+ while (len < 16) {
+ int in;
+ in = inw(MFM_DATAIN);
+ result[len++] = in >> 8;
+ result[len++] = in;
+ }
+ }
+ if (handler) {
+ handler();
+ return;
+ }
+ outw (CMD_RCAL, MFM_COMMAND); /* Clear interrupt condition */
+ printk ("mfm: unexpected interrupt - status = ");
+ print_status ();
+ while (1);
+}
+
+
+
+
+
+/*
+ * Tell the user about the drive if we decided it exists.
+ */
+static void mfm_geometry(int drive)
+{
+ struct mfm_info *p = mfm_info + drive;
+ struct gendisk *disk = mfm_gendisk[drive];
+ disk->private_data = p;
+ if (p->cylinders)
+ printk ("%s: %dMB CHS=%d/%d/%d LCC=%d RECOMP=%d\n",
+ disk->disk_name,
+ p->cylinders * p->heads * p->sectors / 4096,
+ p->cylinders, p->heads, p->sectors,
+ p->lowcurrent, p->precomp);
+ set_capacity(disk, p->cylinders * p->heads * p->sectors / 2);
+}
+
+#ifdef CONFIG_BLK_DEV_MFM_AUTODETECT
+/*
+ * Attempt to detect a drive and find its geometry. The drive has already been
+ * specified...
+ *
+ * We first recalibrate the disk, then try to probe sectors, heads and then
+ * cylinders. NOTE! the cylinder probe may break drives. The xd disk driver
+ * does something along these lines, so I assume that most drives are up to
+ * this mistreatment...
+ */
+static int mfm_detectdrive (int drive)
+{
+ unsigned int mingeo[3], maxgeo[3];
+ unsigned int attribute, need_recal = 1;
+ unsigned char cmdb[8];
+
+ memset (mingeo, 0, sizeof (mingeo));
+ maxgeo[0] = mfm_info[drive].sectors;
+ maxgeo[1] = mfm_info[drive].heads;
+ maxgeo[2] = mfm_info[drive].cylinders;
+
+ cmdb[0] = drive + 1;
+ cmdb[6] = 0;
+ cmdb[7] = 1;
+ for (attribute = 0; attribute < 3; attribute++) {
+ while (mingeo[attribute] != maxgeo[attribute]) {
+ unsigned int variable;
+
+ variable = (maxgeo[attribute] + mingeo[attribute]) >> 1;
+ cmdb[1] = cmdb[2] = cmdb[3] = cmdb[4] = cmdb[5] = 0;
+
+ if (need_recal) {
+ int tries = 5;
+
+ do {
+ issue_command (CMD_RCLB, cmdb, 2);
+ wait_for_completion ();
+ wait_for_command_end ();
+ if (result[1] == 0x20)
+ break;
+ } while (result[1] && --tries);
+ if (result[1]) {
+ outw (CMD_RCAL, MFM_COMMAND);
+ return 0;
+ }
+ need_recal = 0;
+ }
+
+ switch (attribute) {
+ case 0:
+ cmdb[5] = variable;
+ issue_command (CMD_CMPD, cmdb, 8);
+ break;
+ case 1:
+ cmdb[1] = variable;
+ cmdb[4] = variable;
+ issue_command (CMD_CMPD, cmdb, 8);
+ break;
+ case 2:
+ cmdb[2] = variable >> 8;
+ cmdb[3] = variable;
+ issue_command (CMD_SEK, cmdb, 4);
+ break;
+ }
+ wait_for_completion ();
+ wait_for_command_end ();
+
+ switch (result[1]) {
+ case 0x00:
+ case 0x50:
+ mingeo[attribute] = variable + 1;
+ break;
+
+ case 0x20:
+ outw (CMD_RCAL, MFM_COMMAND);
+ return 0;
+
+ case 0x24:
+ need_recal = 1;
+ default:
+ maxgeo[attribute] = variable;
+ break;
+ }
+ }
+ }
+ mfm_info[drive].cylinders = mingeo[2];
+ mfm_info[drive].lowcurrent = mingeo[2];
+ mfm_info[drive].precomp = mingeo[2] / 2;
+ mfm_info[drive].heads = mingeo[1];
+ mfm_info[drive].sectors = mingeo[0];
+ outw (CMD_RCAL, MFM_COMMAND);
+ return 1;
+}
+#endif
+
+/*
+ * Initialise all drive information for this controller.
+ */
+static int mfm_initdrives(void)
+{
+ int drive;
+
+ if (number_mfm_drives > MFM_MAXDRIVES) {
+ number_mfm_drives = MFM_MAXDRIVES;
+ printk("No. of ADFS MFM drives is greater than MFM_MAXDRIVES - you can't have that many!\n");
+ }
+
+ for (drive = 0; drive < number_mfm_drives; drive++) {
+ mfm_info[drive].lowcurrent = 1;
+ mfm_info[drive].precomp = 1;
+ mfm_info[drive].cylinder = -1;
+ mfm_info[drive].errors.recal = 0;
+ mfm_info[drive].errors.report = 0;
+ mfm_info[drive].errors.abort = 4;
+
+#ifdef CONFIG_BLK_DEV_MFM_AUTODETECT
+ mfm_info[drive].cylinders = 1024;
+ mfm_info[drive].heads = 8;
+ mfm_info[drive].sectors = 64;
+ {
+ unsigned char cmdb[16];
+
+ mfm_setupspecify (drive, cmdb);
+ cmdb[1] &= ~0x81;
+ issue_command (CMD_SPC, cmdb, 16);
+ wait_for_completion ();
+ if (!mfm_detectdrive (drive)) {
+ mfm_info[drive].cylinders = 0;
+ mfm_info[drive].heads = 0;
+ mfm_info[drive].sectors = 0;
+ }
+ cmdb[0] = cmdb[1] = 0;
+ issue_command (CMD_CKV, cmdb, 2);
+ }
+#else
+ mfm_info[drive].cylinders = 1; /* its going to have to figure it out from the partition info */
+ mfm_info[drive].heads = 4;
+ mfm_info[drive].sectors = 32;
+#endif
+ }
+ return number_mfm_drives;
+}
+
+
+
+/*
+ * The 'front' end of the mfm driver follows...
+ */
+
+static int mfm_ioctl(struct inode *inode, struct file *file, u_int cmd, u_long arg)
+{
+ struct mfm_info *p = inode->i_bdev->bd_disk->private_data;
+ struct hd_geometry *geo = (struct hd_geometry *) arg;
+ if (cmd != HDIO_GETGEO)
+ return -EINVAL;
+ if (!arg)
+ return -EINVAL;
+ if (put_user (p->heads, &geo->heads))
+ return -EFAULT;
+ if (put_user (p->sectors, &geo->sectors))
+ return -EFAULT;
+ if (put_user (p->cylinders, &geo->cylinders))
+ return -EFAULT;
+ if (put_user (get_start_sect(inode->i_bdev), &geo->start))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * This is to handle various kernel command line parameters
+ * specific to this driver.
+ */
+void mfm_setup(char *str, int *ints)
+{
+ return;
+}
+
+/*
+ * Set the CHS from the ADFS boot block if it is present. This is not ideal
+ * since if there are any non-ADFS partitions on the disk, this won't work!
+ * Hence, I want to get rid of this...
+ */
+void xd_set_geometry(struct block_device *bdev, unsigned char secsptrack,
+ unsigned char heads, unsigned int secsize)
+{
+ struct mfm_info *p = bdev->bd_disk->private_data;
+ int drive = p - mfm_info;
+ unsigned long disksize = bdev->bd_inode->i_size;
+
+ if (p->cylinders == 1) {
+ p->sectors = secsptrack;
+ p->heads = heads;
+ p->cylinders = discsize / (secsptrack * heads * secsize);
+
+ if ((heads < 1) || (p->cylinders > 1024)) {
+ printk("%s: Insane disc shape! Setting to 512/4/32\n",
+ bdev->bd_disk->disk_name);
+
+ /* These values are fairly arbitary, but are there so that if your
+ * lucky you can pick apart your disc to find out what is going on -
+ * I reckon these figures won't hurt MOST drives
+ */
+ p->sectors = 32;
+ p->heads = 4;
+ p->cylinders = 512;
+ }
+ if (raw_cmd.dev == drive)
+ mfm_specify ();
+ mfm_geometry (drive);
+ }
+}
+
+static struct block_device_operations mfm_fops =
+{
+ .owner = THIS_MODULE,
+ .ioctl = mfm_ioctl,
+};
+
+/*
+ * See if there is a controller at the address presently at mfm_addr
+ *
+ * We check to see if the controller is busy - if it is, we abort it first,
+ * and check that the chip is no longer busy after at least 180 clock cycles.
+ * We then issue a command and check that the BSY or CPR bits are set.
+ */
+static int mfm_probecontroller (unsigned int mfm_addr)
+{
+ if (inw (MFM_STATUS) & STAT_BSY) {
+ outw (CMD_ABT, MFM_COMMAND);
+ udelay (50);
+ if (inw (MFM_STATUS) & STAT_BSY)
+ return 0;
+ }
+
+ if (inw (MFM_STATUS) & STAT_CED)
+ outw (CMD_RCAL, MFM_COMMAND);
+
+ outw (CMD_SEK, MFM_COMMAND);
+
+ if (inw (MFM_STATUS) & (STAT_BSY | STAT_CPR)) {
+ unsigned int count = 2000;
+ while (inw (MFM_STATUS) & STAT_BSY) {
+ udelay (500);
+ if (!--count)
+ return 0;
+ }
+
+ outw (CMD_RCAL, MFM_COMMAND);
+ }
+ return 1;
+}
+
+static int mfm_do_init(unsigned char irqmask)
+{
+ int i, ret;
+
+ printk("mfm: found at address %08X, interrupt %d\n", mfm_addr, mfm_irq);
+
+ ret = -EBUSY;
+ if (!request_region (mfm_addr, 10, "mfm"))
+ goto out1;
+
+ ret = register_blkdev(MAJOR_NR, "mfm");
+ if (ret)
+ goto out2;
+
+ /* Stuff for the assembler routines to get to */
+ hdc63463_baseaddress = ioaddr(mfm_addr);
+ hdc63463_irqpolladdress = mfm_IRQPollLoc;
+ hdc63463_irqpollmask = irqmask;
+
+ mfm_queue = blk_init_queue(do_mfm_request, &mfm_lock);
+ if (!mfm_queue)
+ goto out2a;
+
+ Busy = 0;
+ lastspecifieddrive = -1;
+
+ mfm_drives = mfm_initdrives();
+ if (!mfm_drives) {
+ ret = -ENODEV;
+ goto out3;
+ }
+
+ for (i = 0; i < mfm_drives; i++) {
+ struct gendisk *disk = alloc_disk(64);
+ if (!disk)
+ goto Enomem;
+ disk->major = MAJOR_NR;
+ disk->first_minor = i << 6;
+ disk->fops = &mfm_fops;
+ sprintf(disk->disk_name, "mfm%c", 'a'+i);
+ mfm_gendisk[i] = disk;
+ }
+
+ printk("mfm: detected %d hard drive%s\n", mfm_drives,
+ mfm_drives == 1 ? "" : "s");
+ ret = request_irq(mfm_irq, mfm_interrupt_handler, SA_INTERRUPT, "MFM harddisk", NULL);
+ if (ret) {
+ printk("mfm: unable to get IRQ%d\n", mfm_irq);
+ goto out4;
+ }
+
+ if (mfm_irqenable)
+ outw(0x80, mfm_irqenable); /* Required to enable IRQs from MFM podule */
+
+ for (i = 0; i < mfm_drives; i++) {
+ mfm_geometry(i);
+ mfm_gendisk[i]->queue = mfm_queue;
+ add_disk(mfm_gendisk[i]);
+ }
+ return 0;
+
+out4:
+ for (i = 0; i < mfm_drives; i++)
+ put_disk(mfm_gendisk[i]);
+out3:
+ blk_cleanup_queue(mfm_queue);
+out2a:
+ unregister_blkdev(MAJOR_NR, "mfm");
+out2:
+ release_region(mfm_addr, 10);
+out1:
+ return ret;
+Enomem:
+ while (i--)
+ put_disk(mfm_gendisk[i]);
+ goto out3;
+}
+
+static void mfm_do_exit(void)
+{
+ int i;
+
+ free_irq(mfm_irq, NULL);
+ for (i = 0; i < mfm_drives; i++) {
+ del_gendisk(mfm_gendisk[i]);
+ put_disk(mfm_gendisk[i]);
+ }
+ blk_cleanup_queue(mfm_queue);
+ unregister_blkdev(MAJOR_NR, "mfm");
+ if (mfm_addr)
+ release_region(mfm_addr, 10);
+}
+
+static int __devinit mfm_probe(struct expansion_card *ec, struct ecard_id *id)
+{
+ if (mfm_addr)
+ return -EBUSY;
+
+ mfm_addr = ecard_address(ec, ECARD_IOC, ECARD_MEDIUM) + 0x800;
+ mfm_IRQPollLoc = ioaddr(mfm_addr + 0x400);
+ mfm_irqenable = mfm_IRQPollLoc;
+ mfm_irq = ec->irq;
+
+ return mfm_do_init(0x08);
+}
+
+static void __devexit mfm_remove(struct expansion_card *ec)
+{
+ outw (0, mfm_irqenable); /* Required to enable IRQs from MFM podule */
+ mfm_do_exit();
+}
+
+static const struct ecard_id mfm_cids[] = {
+ { MANU_ACORN, PROD_ACORN_MFM },
+ { 0xffff, 0xffff },
+};
+
+static struct ecard_driver mfm_driver = {
+ .probe = mfm_probe,
+ .remove = __devexit(mfm_remove),
+ .id_table = mfm_cids,
+ .drv = {
+ .name = "mfm",
+ },
+};
+
+/*
+ * Look for a MFM controller - first check the motherboard, then the podules
+ * The podules have an extra interrupt enable that needs to be played with
+ *
+ * The HDC is accessed at MEDIUM IOC speeds.
+ */
+static int __init mfm_init (void)
+{
+ unsigned char irqmask;
+
+ if (mfm_probecontroller(ONBOARD_MFM_ADDRESS)) {
+ mfm_addr = ONBOARD_MFM_ADDRESS;
+ mfm_IRQPollLoc = IOC_IRQSTATB;
+ mfm_irqenable = 0;
+ mfm_irq = IRQ_HARDDISK;
+ return mfm_do_init(0x08); /* IL3 pin */
+ } else {
+ return ecard_register_driver(&mfm_driver);
+ }
+}
+
+static void __exit mfm_exit(void)
+{
+ if (mfm_addr == ONBOARD_MFM_ADDRESS)
+ mfm_do_exit();
+ else
+ ecard_unregister_driver(&mfm_driver);
+}
+
+module_init(mfm_init)
+module_exit(mfm_exit)
+MODULE_LICENSE("GPL");
diff --git a/drivers/acorn/char/Makefile b/drivers/acorn/char/Makefile
new file mode 100644
index 000000000000..2fa9a8bf48a0
--- /dev/null
+++ b/drivers/acorn/char/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the acorn character device drivers.
+#
+
+obj-$(CONFIG_ARCH_ACORN) += i2c.o pcf8583.o
+obj-$(CONFIG_L7200_KEYB) += defkeymap-l7200.o keyb_l7200.o
diff --git a/drivers/acorn/char/defkeymap-l7200.c b/drivers/acorn/char/defkeymap-l7200.c
new file mode 100644
index 000000000000..9e18ce742e38
--- /dev/null
+++ b/drivers/acorn/char/defkeymap-l7200.c
@@ -0,0 +1,386 @@
+/*
+ * linux/drivers/acorn/char/defkeymap-l7200.c
+ *
+ * Default keyboard maps for LinkUp Systems L7200 board
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ * 08-04-2000 SJH Created file
+ */
+
+#include <linux/types.h>
+#include <linux/keyboard.h>
+#include <linux/kd.h>
+
+/* Normal (maps 1:1 with no processing) */
+#define KTn 0xF0
+/* Function keys */
+#define KTf 0xF1
+/* Special (Performs special house-keeping funcs) */
+#define KTs 0xF2
+#define KIGNORE K(KTs, 0) /* Ignore */
+#define KENTER K(KTs, 1) /* Enter */
+#define KREGS K(KTs, 2) /* Regs */
+#define KMEM K(KTs, 3) /* Mem */
+#define KSTAT K(KTs, 4) /* State */
+#define KINTR K(KTs, 5) /* Intr */
+#define Ksl 6 /* Last console */
+#define KCAPSLK K(KTs, 7) /* Caps lock */
+#define KNUMLK K(KTs, 8) /* Num-lock */
+#define KSCRLLK K(KTs, 9) /* Scroll-lock */
+#define KSCRLFOR K(KTs,10) /* Scroll forward */
+#define KSCRLBAK K(KTs,11) /* Scroll back */
+#define KREBOOT K(KTs,12) /* Reboot */
+#define KCAPSON K(KTs,13) /* Caps on */
+#define KCOMPOSE K(KTs,14) /* Compose */
+#define KSAK K(KTs,15) /* SAK */
+#define CONS_DEC K(KTs,16) /* Dec console */
+#define CONS_INC K(KTs,17) /* Incr console */
+#define KFLOPPY K(KTs,18) /* Floppy */
+/* Key pad (0-9 = digits, 10=+, 11=-, 12=*, 13=/, 14=enter, 16=., 17=# */
+#define KTp 0xF3
+#define KPAD_0 K(KTp, 0 )
+#define KPAD_1 K(KTp, 1 )
+#define KPAD_2 K(KTp, 2 )
+#define KPAD_3 K(KTp, 3 )
+#define KPAD_4 K(KTp, 4 )
+#define KPAD_5 K(KTp, 5 )
+#define KPAD_6 K(KTp, 6 )
+#define KPAD_7 K(KTp, 7 )
+#define KPAD_8 K(KTp, 8 )
+#define KPAD_9 K(KTp, 9 )
+#define KPAD_PL K(KTp,10 )
+#define KPAD_MI K(KTp,11 )
+#define KPAD_ML K(KTp,12 )
+#define KPAD_DV K(KTp,13 )
+#define KPAD_EN K(KTp,14 )
+#define KPAD_DT K(KTp,16 )
+#define KPAD_HS K(KTp,20 )
+/* Console switching */
+#define KCn 0xF5
+/* Cursor */
+#define KTc 0xF6
+#define Kcd 0 /* Cursor down */
+#define Kcl 1 /* Cursor left */
+#define Kcr 2 /* Cursor right */
+#define Kcu 3 /* Cursor up */
+/* Shift/alt modifiers etc */
+#define KMd 0xF7
+#define KSHIFT K(KMd, 0 )
+#define KALTGR K(KMd, 1 )
+#define KCTRL K(KMd, 2 )
+#define KALT K(KMd, 3 )
+/* Meta */
+#define KMt 0xF8
+#define KAs 0xF9
+#define KPADA_0 K(KAs, 0 )
+#define KPADA_1 K(KAs, 1 )
+#define KPADA_2 K(KAs, 2 )
+#define KPADA_3 K(KAs, 3 )
+#define KPADA_4 K(KAs, 4 )
+#define KPADA_5 K(KAs, 5 )
+#define KPADA_6 K(KAs, 6 )
+#define KPADA_7 K(KAs, 7 )
+#define KPADA_8 K(KAs, 8 )
+#define KPADA_9 K(KAs, 9 )
+#define KPADB_0 K(KAs,10 )
+#define KPADB_1 K(KAs,11 )
+#define KPADB_2 K(KAs,12 )
+#define KPADB_3 K(KAs,13 )
+#define KPADB_4 K(KAs,14 )
+#define KPADB_5 K(KAs,15 )
+#define KPADB_6 K(KAs,16 )
+#define KPADB_7 K(KAs,17 )
+#define KPADB_8 K(KAs,18 )
+#define KPADB_9 K(KAs,19 )
+/* Locking keys */
+#define KLk 0xFA
+/* Letters */
+#define KTl 0xFB
+
+/*
+ * Here is the layout of the keys for the Fujitsu QWERTY
+ * style keyboard:
+ *
+ * static char Fujitsu_Key_Table[] =
+ * {
+ * KALT, '`' , KNUL, KCTL, KFUN, KESC, '1' , '2' ,
+ * '9' , '0' , '-' , '=' , KNUL, KBSP, KNUL, KNUL,
+ * KNUL, KBSL, KSHF, KNUL, KNUL, KDEL, KNUL, 't' ,
+ * 'y' , 'u' , 'i' , KRET, KSHF, KPGD, KNUL, KNUL,
+ * KNUL, KTAB, KNUL, KNUL, KNUL, 'q' , 'w' , 'e' ,
+ * 'r' , 'o' , 'p' , '[' , KNUL, ']' , KNUL, KNUL,
+ * KNUL, 'z' , KNUL, KNUL, KNUL, KSHL, KNUL, KNUL,
+ * 'k' , 'l' , ';' , KSQT, KNUL, KPGU, KNUL, KNUL,
+ * KNUL, 'a' , KNUL, KNUL, KNUL, 's' , 'd' , 'f' ,
+ * 'g' , 'h' , 'j' , '/' , KNUL, KHME, KNUL, KNUL,
+ * KNUL, 'x' , KNUL, KNUL, KNUL, 'c' , 'v' , 'b' ,
+ * 'n' , 'm' , ',' , '.' , KNUL, ' ' , KNUL, KNUL,
+ * KNUL, KNUL, KNUL, KNUL, KNUL, '3' , '4' , '5' ,
+ * '6' , '7' , '8' , KNUL, KPRG, KNUL, KEND, KNUL,
+ * };
+ */
+
+u_short plain_map[NR_KEYS]=
+{
+ 0xf703, 0xf060, 0xf200, 0xf702, 0xf200, 0xf01b, 0xf031, 0xf032,
+ 0xf039, 0xf030, 0xf02d, 0xf03d, 0xf200, 0xf07f, 0xf200, 0xf200,
+ 0xf200, 0xf05c, 0xf700, 0xf200, 0xf200, 0xf116, 0xf000, 0xfb74,
+ 0xfb79, 0xfb75, 0xfb69, 0xf201, 0xf700, 0xf600, 0xf200, 0xf200,
+ 0xf200, 0xf009, 0xf200, 0xf200, 0xf200, 0xfb71, 0xfb77, 0xfb65,
+ 0xfb72, 0xfb6f, 0xfb70, 0xf05b, 0xf200, 0xf05d, 0xf200, 0xf200,
+ 0xf200, 0xfb7a, 0xf200, 0xf200, 0xf200, 0xf207, 0xf200, 0xf200,
+ 0xfb6b, 0xfb6c, 0xf03b, 0xf027, 0xf200, 0xf603, 0xf200, 0xf200,
+ 0xf200, 0xfb61, 0xf200, 0xf200, 0xf200, 0xfb73, 0xfb64, 0xfb66,
+ 0xfb67, 0xfb68, 0xfb6a, 0xf02f, 0xf200, 0xf601, 0xf200, 0xf200,
+ 0xf200, 0xfb78, 0xf200, 0xf200, 0xf200, 0xfb63, 0xfb76, 0xfb62,
+ 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf200, 0xf020, 0xf200, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf033, 0xf034, 0xf035,
+ 0xf036, 0xf037, 0xf038, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
+};
+
+u_short shift_map[NR_KEYS]=
+{
+ 0xf703, 0xf07e, 0xf200, 0xf702, 0xf200, 0xf01b, 0xf021, 0xf040,
+ 0xf028, 0xf029, 0xf05f, 0xf02b, 0xf200, 0xf07f, 0xf200, 0xf200,
+ 0xf200, 0xf07c, 0xf700, 0xf200, 0xf200, 0xf116, 0xf000, 0xfb54,
+ 0xfb59, 0xfb55, 0xfb49, 0xf201, 0xf700, 0xf600, 0xf200, 0xf200,
+ 0xf200, 0xf009, 0xf200, 0xf200, 0xf200, 0xfb51, 0xfb57, 0xfb45,
+ 0xfb52, 0xfb4f, 0xfb50, 0xf07b, 0xf200, 0xf07d, 0xf200, 0xf200,
+ 0xf200, 0xfb5a, 0xf200, 0xf200, 0xf200, 0xf207, 0xf200, 0xf200,
+ 0xfb4b, 0xfb4c, 0xf03a, 0xf022, 0xf200, 0xf603, 0xf200, 0xf200,
+ 0xf200, 0xfb41, 0xf200, 0xf200, 0xf200, 0xfb53, 0xfb44, 0xfb46,
+ 0xfb47, 0xfb48, 0xfb4a, 0xf03f, 0xf200, 0xf601, 0xf200, 0xf200,
+ 0xf200, 0xfb58, 0xf200, 0xf200, 0xf200, 0xfb43, 0xfb56, 0xfb42,
+ 0xfb4e, 0xfb4d, 0xf03c, 0xf03e, 0xf200, 0xf020, 0xf200, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf023, 0xf024, 0xf025,
+ 0xf05e, 0xf026, 0xf02a, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
+};
+
+u_short altgr_map[NR_KEYS]=
+{
+ KIGNORE ,K(KCn,12 ),K(KCn,13 ),K(KCn,14 ),K(KCn,15 ),K(KCn,16 ),K(KCn,17 ),K(KCn, 18),
+ K(KCn, 19),K(KCn,20 ),K(KCn,21 ),K(KCn,22 ),K(KCn,23 ),KIGNORE ,KREGS ,KINTR ,
+ KIGNORE ,KIGNORE ,K(KTn,'@'),KIGNORE ,K(KTn,'$'),KIGNORE ,KIGNORE ,K(KTn,'{'),
+ K(KTn,'['),K(KTn,']'),K(KTn,'}'),K(KTn,'\\'),KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,21 ),
+ K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,KIGNORE ,K(KTl,'q'),
+ K(KTl,'w'),K(KTl,'e'),K(KTl,'r'),K(KTl,'t' ),K(KTl,'y'),K(KTl,'u'),K(KTl,'i' ),K(KTl,'o'),
+ K(KTl,'p'),KIGNORE ,K(KTn,'~'),KIGNORE ,K(KTf,22 ),K(KTf,23 ),K(KTf,25 ),KPADB_7 ,
+ KPADB_8 ,KPADB_9 ,KPAD_MI ,KCTRL ,K(KAs,20 ),K(KTl,'s'),K(KAs,23 ),K(KAs,25 ),
+ K(KTl,'g'),K(KTl,'h'),K(KTl,'j'),K(KTl,'k' ),K(KTl,'l'),KIGNORE ,KIGNORE ,KENTER ,
+ KPADB_4 ,KPADB_5 ,KPADB_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KTl,'z' ),K(KTl,'x'),
+ K(KAs,22 ),K(KTl,'v'),K(KTl,21 ),K(KTl,'n' ),K(KTl,'m'),KIGNORE ,KIGNORE ,KIGNORE ,
+ KSHIFT ,K(KTc,Kcu),KPADB_1 ,KPADB_2 ,KPADB_3 ,KCAPSLK ,KALT ,KIGNORE ,
+ KALTGR ,KCTRL ,K(KTc,Kcl),K(KTc,Kcd ),K(KTc,Kcr),KPADB_0 ,KPAD_DT ,KPAD_EN ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+};
+
+u_short ctrl_map[NR_KEYS]=
+{
+ 0xf703, 0xf200, 0xf200, 0xf702, 0xf200, 0xf200, 0xf001, 0xf002,
+ 0xf009, 0xf000, 0xf031, 0xf200, 0xf200, 0xf07f, 0xf200, 0xf200,
+ 0xf200, 0xf01c, 0xf700, 0xf200, 0xf200, 0xf116, 0xf000, 0xf020,
+ 0xf019, 0xf015, 0xf009, 0xf201, 0xf700, 0xf600, 0xf200, 0xf200,
+ 0xf200, 0xf009, 0xf200, 0xf200, 0xf200, 0xf011, 0xf017, 0xf005,
+ 0xf012, 0xf00f, 0xf010, 0xf01b, 0xf200, 0xf01d, 0xf200, 0xf200,
+ 0xf200, 0xf01a, 0xf200, 0xf200, 0xf200, 0xf207, 0xf200, 0xf200,
+ 0xf00b, 0xf00c, 0xf200, 0xf007, 0xf200, 0xf603, 0xf200, 0xf200,
+ 0xf200, 0xf001, 0xf200, 0xf200, 0xf200, 0xf001, 0xf013, 0xf006,
+ 0xf007, 0xf008, 0xf00a, 0xf07f, 0xf200, 0xf601, 0xf200, 0xf200,
+ 0xf200, 0xf018, 0xf200, 0xf200, 0xf200, 0xf003, 0xf016, 0xf002,
+ 0xf00e, 0xf00d, 0xf200, 0xf200, 0xf200, 0xf000, 0xf200, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf01b, 0xf01c, 0xf01d,
+ 0xf036, 0xf037, 0xf038, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200,
+ 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf200, 0xf602, 0xf200,
+};
+
+u_short shift_ctrl_map[NR_KEYS]=
+{
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KFLOPPY ,KINTR ,
+ KIGNORE ,KIGNORE ,K(KTn, 0 ),KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,K(KTn,31 ),KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,21 ),
+ K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,KIGNORE ,K(KTn,17 ),
+ K(KTn,23 ),K(KTn, 5 ),K(KTn,18 ),K(KTn,20 ),K(KTn,25 ),K(KTn,21 ),K(KTn, 9 ),K(KTn,15 ),
+ K(KTn,16 ),KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,22 ),K(KTf,23 ),K(KTf,25 ),KPAD_7 ,
+ KPAD_8 ,KPAD_9 ,KPAD_MI ,KCTRL ,K(KTn, 1 ),K(KTn,19 ),K(KTn, 4 ),K(KTn, 6 ),
+ K(KTn, 7 ),K(KTn, 8 ),K(KTn,10 ),K(KTn,11 ),K(KTn,12 ),KIGNORE ,K(KTn, 7 ),KENTER ,
+ KPAD_4 ,KPAD_5 ,KPAD_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KTn,26 ),K(KTn,24 ),
+ K(KTn, 3 ),K(KTn,22 ),K(KTn, 2 ),K(KTn,14 ),K(KTn,13 ),KIGNORE ,KIGNORE ,KIGNORE ,
+ KSHIFT ,K(KTc,Kcu),KPAD_1 ,KPAD_2 ,KPAD_3 ,KCAPSLK ,KALT ,K(KTn, 0 ),
+ KALTGR ,KCTRL ,K(KTc,Kcl),K(KTc,Kcd ),K(KTc,Kcr),KPAD_0 ,KPAD_DT ,KPAD_EN ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+};
+
+u_short alt_map[NR_KEYS]=
+{
+ K(KMt,27 ),K(KCn, 0 ),K(KCn, 1 ),K(KCn, 2 ),K(KCn, 3 ),K(KCn, 4 ),K(KCn, 5 ),K(KCn, 6 ),
+ K(KCn, 7 ),K(KCn, 8 ),K(KCn, 9 ),K(KCn,10 ),K(KCn,11 ),KIGNORE ,KSCRLLK ,KINTR ,
+ K(KMt,'`'),K(KMt,'1'),K(KMt,'2'),K(KMt,'3' ),K(KMt,'4'),K(KMt,'5'),K(KMt,'6' ),K(KMt,'7'),
+ K(KMt,'8'),K(KMt,'9'),K(KMt,'0'),K(KMt,'-' ),K(KMt,'='),K(KMt,'£'),K(KMt,127 ),K(KTf,21 ),
+ K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,K(KMt, 9 ),K(KMt,'q'),
+ K(KMt,'w'),K(KMt,'e'),K(KMt,'r'),K(KMt,'t' ),K(KMt,'y'),K(KMt,'u'),K(KMt,'i' ),K(KMt,'o'),
+ K(KMt,'p'),K(KMt,'['),K(KMt,']'),K(KMt,'\\'),K(KTf,22 ),K(KTf,23 ),K(KTf,25 ),KPADA_7 ,
+ KPADA_8 ,KPADA_9 ,KPAD_MI ,KCTRL ,K(KMt,'a'),K(KMt,'s'),K(KMt,'d' ),K(KMt,'f'),
+ K(KMt,'g'),K(KMt,'h'),K(KMt,'j'),K(KMt,'k' ),K(KMt,'l'),K(KMt,';'),K(KMt,'\''),K(KMt,13 ),
+ KPADA_4 ,KPADA_5 ,KPADA_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KMt,'z' ),K(KMt,'x'),
+ K(KMt,'c'),K(KMt,'v'),K(KMt,'b'),K(KMt,'n' ),K(KMt,'m'),K(KMt,','),K(KMt,'.' ),KIGNORE ,
+ KSHIFT ,K(KTc,Kcu),KPADA_1 ,KPADA_2 ,KPADA_3 ,KCAPSLK ,KALT ,K(KMt,' '),
+ KALTGR ,KCTRL ,CONS_DEC ,K(KTc,Kcd ),CONS_INC ,KPADA_0 ,KPAD_DT ,KPAD_EN ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+};
+
+u_short ctrl_alt_map[NR_KEYS]=
+{
+ KIGNORE ,K(KCn, 0 ),K(KCn, 1 ),K(KCn, 2 ),K(KCn, 3 ),K(KCn, 4 ),K(KCn, 5 ),K(KCn, 6 ),
+ K(KCn, 7 ),K(KCn, 8 ),K(KCn, 9 ),K(KCn,10 ),K(KCn,11 ),KIGNORE ,KIGNORE ,KINTR ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,K(KTf,21 ),
+ K(KTf,20 ),K(KTf,24 ),KNUMLK ,KPAD_DV ,KPAD_ML ,KPAD_HS ,KIGNORE ,K(KMt,17 ),
+ K(KMt,23 ),K(KMt, 5 ),K(KMt,18 ),K(KMt,20 ),K(KMt,25 ),K(KMt,21 ),K(KMt, 9 ),K(KMt,15 ),
+ K(KMt,16 ),KIGNORE ,KIGNORE ,KIGNORE ,KREBOOT ,K(KTf,23 ),K(KTf,25 ),KPAD_7 ,
+ KPAD_8 ,KPAD_9 ,KPAD_MI ,KCTRL ,K(KMt, 1 ),K(KMt,19 ),K(KMt, 4 ),K(KMt, 6 ),
+ K(KMt, 7 ),K(KMt, 8 ),K(KMt,10 ),K(KMt,11 ),K(KMt,12 ),KIGNORE ,KIGNORE ,KENTER ,
+ KPAD_4 ,KPAD_5 ,KPAD_6 ,KPAD_PL ,KSHIFT ,KIGNORE ,K(KMt,26 ),K(KMt,24 ),
+ K(KMt, 3 ),K(KMt,22 ),K(KMt, 2 ),K(KMt,14 ),K(KMt,13 ),KIGNORE ,KIGNORE ,KIGNORE ,
+ KSHIFT ,K(KTc,Kcu),KPAD_1 ,KPAD_2 ,KPAD_3 ,KCAPSLK ,KALT ,KIGNORE ,
+ KALTGR ,KCTRL ,K(KTc,Kcl),K(KTc,Kcd ),K(KTc,Kcr),KPAD_0 ,KREBOOT ,KPAD_EN ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+ KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,KIGNORE ,
+};
+
+ushort *key_maps[MAX_NR_KEYMAPS] = {
+ plain_map, shift_map, altgr_map, 0,
+ ctrl_map, shift_ctrl_map, 0, 0,
+ alt_map, 0, 0, 0,
+ ctrl_alt_map, 0
+};
+
+unsigned int keymap_count = 7;
+
+/*
+ * Philosophy: most people do not define more strings, but they who do
+ * often want quite a lot of string space. So, we statically allocate
+ * the default and allocate dynamically in chunks of 512 bytes.
+ */
+
+char func_buf[] = {
+ '\033', '[', '[', 'A', 0,
+ '\033', '[', '[', 'B', 0,
+ '\033', '[', '[', 'C', 0,
+ '\033', '[', '[', 'D', 0,
+ '\033', '[', '[', 'E', 0,
+ '\033', '[', '1', '7', '~', 0,
+ '\033', '[', '1', '8', '~', 0,
+ '\033', '[', '1', '9', '~', 0,
+ '\033', '[', '2', '0', '~', 0,
+ '\033', '[', '2', '1', '~', 0,
+ '\033', '[', '2', '3', '~', 0,
+ '\033', '[', '2', '4', '~', 0,
+ '\033', '[', '2', '5', '~', 0,
+ '\033', '[', '2', '6', '~', 0,
+ '\033', '[', '2', '8', '~', 0,
+ '\033', '[', '2', '9', '~', 0,
+ '\033', '[', '3', '1', '~', 0,
+ '\033', '[', '3', '2', '~', 0,
+ '\033', '[', '3', '3', '~', 0,
+ '\033', '[', '3', '4', '~', 0,
+ '\033', '[', '1', '~', 0,
+ '\033', '[', '2', '~', 0,
+ '\033', '[', '3', '~', 0,
+ '\033', '[', '4', '~', 0,
+ '\033', '[', '5', '~', 0,
+ '\033', '[', '6', '~', 0,
+ '\033', '[', 'M', 0,
+ '\033', '[', 'P', 0,
+};
+
+char *funcbufptr = func_buf;
+int funcbufsize = sizeof(func_buf);
+int funcbufleft = 0; /* space left */
+
+char *func_table[MAX_NR_FUNC] = {
+ func_buf + 0,
+ func_buf + 5,
+ func_buf + 10,
+ func_buf + 15,
+ func_buf + 20,
+ func_buf + 25,
+ func_buf + 31,
+ func_buf + 37,
+ func_buf + 43,
+ func_buf + 49,
+ func_buf + 55,
+ func_buf + 61,
+ func_buf + 67,
+ func_buf + 73,
+ func_buf + 79,
+ func_buf + 85,
+ func_buf + 91,
+ func_buf + 97,
+ func_buf + 103,
+ func_buf + 109,
+ func_buf + 115,
+ func_buf + 120,
+ func_buf + 125,
+ func_buf + 130,
+ func_buf + 135,
+ func_buf + 140,
+ func_buf + 145,
+ 0,
+ 0,
+ func_buf + 149,
+ 0,
+};
+
+struct kbdiacr accent_table[MAX_DIACR] = {
+ {'`', 'A', '\300'}, {'`', 'a', '\340'},
+ {'\'', 'A', '\301'}, {'\'', 'a', '\341'},
+ {'^', 'A', '\302'}, {'^', 'a', '\342'},
+ {'~', 'A', '\303'}, {'~', 'a', '\343'},
+ {'"', 'A', '\304'}, {'"', 'a', '\344'},
+ {'O', 'A', '\305'}, {'o', 'a', '\345'},
+ {'0', 'A', '\305'}, {'0', 'a', '\345'},
+ {'A', 'A', '\305'}, {'a', 'a', '\345'},
+ {'A', 'E', '\306'}, {'a', 'e', '\346'},
+ {',', 'C', '\307'}, {',', 'c', '\347'},
+ {'`', 'E', '\310'}, {'`', 'e', '\350'},
+ {'\'', 'E', '\311'}, {'\'', 'e', '\351'},
+ {'^', 'E', '\312'}, {'^', 'e', '\352'},
+ {'"', 'E', '\313'}, {'"', 'e', '\353'},
+ {'`', 'I', '\314'}, {'`', 'i', '\354'},
+ {'\'', 'I', '\315'}, {'\'', 'i', '\355'},
+ {'^', 'I', '\316'}, {'^', 'i', '\356'},
+ {'"', 'I', '\317'}, {'"', 'i', '\357'},
+ {'-', 'D', '\320'}, {'-', 'd', '\360'},
+ {'~', 'N', '\321'}, {'~', 'n', '\361'},
+ {'`', 'O', '\322'}, {'`', 'o', '\362'},
+ {'\'', 'O', '\323'}, {'\'', 'o', '\363'},
+ {'^', 'O', '\324'}, {'^', 'o', '\364'},
+ {'~', 'O', '\325'}, {'~', 'o', '\365'},
+ {'"', 'O', '\326'}, {'"', 'o', '\366'},
+ {'/', 'O', '\330'}, {'/', 'o', '\370'},
+ {'`', 'U', '\331'}, {'`', 'u', '\371'},
+ {'\'', 'U', '\332'}, {'\'', 'u', '\372'},
+ {'^', 'U', '\333'}, {'^', 'u', '\373'},
+ {'"', 'U', '\334'}, {'"', 'u', '\374'},
+ {'\'', 'Y', '\335'}, {'\'', 'y', '\375'},
+ {'T', 'H', '\336'}, {'t', 'h', '\376'},
+ {'s', 's', '\337'}, {'"', 'y', '\377'},
+ {'s', 'z', '\337'}, {'i', 'j', '\377'},
+};
+
+unsigned int accent_table_size = 68;
diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c
new file mode 100644
index 000000000000..c22bb9dca1ec
--- /dev/null
+++ b/drivers/acorn/char/i2c.c
@@ -0,0 +1,369 @@
+/*
+ * linux/drivers/acorn/char/i2c.c
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM IOC/IOMD i2c driver.
+ *
+ * On Acorn machines, the following i2c devices are on the bus:
+ * - PCF8583 real time clock & static RAM
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/miscdevice.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/fs.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/ioc.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#include "pcf8583.h"
+
+extern int (*set_rtc)(void);
+
+static struct i2c_client *rtc_client;
+static const unsigned char days_in_mon[] =
+ { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+#define CMOS_CHECKSUM (63)
+
+/*
+ * Acorn machines store the year in the static RAM at
+ * location 128.
+ */
+#define CMOS_YEAR (64 + 128)
+
+static inline int rtc_command(int cmd, void *data)
+{
+ int ret = -EIO;
+
+ if (rtc_client)
+ ret = rtc_client->driver->command(rtc_client, cmd, data);
+
+ return ret;
+}
+
+/*
+ * Update the century + year bytes in the CMOS RAM, ensuring
+ * that the check byte is correctly adjusted for the change.
+ */
+static int rtc_update_year(unsigned int new_year)
+{
+ unsigned char yr[2], chk;
+ struct mem cmos_year = { CMOS_YEAR, sizeof(yr), yr };
+ struct mem cmos_check = { CMOS_CHECKSUM, 1, &chk };
+ int ret;
+
+ ret = rtc_command(MEM_READ, &cmos_check);
+ if (ret)
+ goto out;
+ ret = rtc_command(MEM_READ, &cmos_year);
+ if (ret)
+ goto out;
+
+ chk -= yr[1] + yr[0];
+
+ yr[1] = new_year / 100;
+ yr[0] = new_year % 100;
+
+ chk += yr[1] + yr[0];
+
+ ret = rtc_command(MEM_WRITE, &cmos_year);
+ if (ret == 0)
+ ret = rtc_command(MEM_WRITE, &cmos_check);
+ out:
+ return ret;
+}
+
+/*
+ * Read the current RTC time and date, and update xtime.
+ */
+static void get_rtc_time(struct rtc_tm *rtctm, unsigned int *year)
+{
+ unsigned char ctrl, yr[2];
+ struct mem rtcmem = { CMOS_YEAR, sizeof(yr), yr };
+ int real_year, year_offset;
+
+ /*
+ * Ensure that the RTC is running.
+ */
+ rtc_command(RTC_GETCTRL, &ctrl);
+ if (ctrl & 0xc0) {
+ unsigned char new_ctrl = ctrl & ~0xc0;
+
+ printk(KERN_WARNING "RTC: resetting control %02x -> %02x\n",
+ ctrl, new_ctrl);
+
+ rtc_command(RTC_SETCTRL, &new_ctrl);
+ }
+
+ if (rtc_command(RTC_GETDATETIME, rtctm) ||
+ rtc_command(MEM_READ, &rtcmem))
+ return;
+
+ real_year = yr[0];
+
+ /*
+ * The RTC year holds the LSB two bits of the current
+ * year, which should reflect the LSB two bits of the
+ * CMOS copy of the year. Any difference indicates
+ * that we have to correct the CMOS version.
+ */
+ year_offset = rtctm->year_off - (real_year & 3);
+ if (year_offset < 0)
+ /*
+ * RTC year wrapped. Adjust it appropriately.
+ */
+ year_offset += 4;
+
+ *year = real_year + year_offset + yr[1] * 100;
+}
+
+static int set_rtc_time(struct rtc_tm *rtctm, unsigned int year)
+{
+ unsigned char leap;
+ int ret;
+
+ leap = (!(year % 4) && (year % 100)) || !(year % 400);
+
+ if (rtctm->mon > 12 || rtctm->mon == 0 || rtctm->mday == 0)
+ return -EINVAL;
+
+ if (rtctm->mday > (days_in_mon[rtctm->mon] + (rtctm->mon == 2 && leap)))
+ return -EINVAL;
+
+ if (rtctm->hours >= 24 || rtctm->mins >= 60 || rtctm->secs >= 60)
+ return -EINVAL;
+
+ /*
+ * The RTC's own 2-bit year must reflect the least
+ * significant two bits of the CMOS year.
+ */
+ rtctm->year_off = (year % 100) & 3;
+
+ ret = rtc_command(RTC_SETDATETIME, rtctm);
+ if (ret == 0)
+ ret = rtc_update_year(year);
+
+ return ret;
+}
+
+/*
+ * Set the RTC time only. Note that
+ * we do not touch the date.
+ */
+static int k_set_rtc_time(void)
+{
+ struct rtc_tm new_rtctm, old_rtctm;
+ unsigned long nowtime = xtime.tv_sec;
+
+ if (rtc_command(RTC_GETDATETIME, &old_rtctm))
+ return 0;
+
+ new_rtctm.cs = xtime.tv_nsec / 10000000;
+ new_rtctm.secs = nowtime % 60; nowtime /= 60;
+ new_rtctm.mins = nowtime % 60; nowtime /= 60;
+ new_rtctm.hours = nowtime % 24;
+
+ /*
+ * avoid writing when we're going to change the day
+ * of the month. We will retry in the next minute.
+ * This basically means that if the RTC must not drift
+ * by more than 1 minute in 11 minutes.
+ *
+ * [ rtc: 1/1/2000 23:58:00, real 2/1/2000 00:01:00,
+ * rtc gets set to 1/1/2000 00:01:00 ]
+ */
+ if ((old_rtctm.hours == 23 && old_rtctm.mins == 59) ||
+ (new_rtctm.hours == 23 && new_rtctm.mins == 59))
+ return 1;
+
+ return rtc_command(RTC_SETTIME, &new_rtctm);
+}
+
+static int rtc_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned int year;
+ struct rtc_time rtctm;
+ struct rtc_tm rtc_raw;
+
+ switch (cmd) {
+ case RTC_ALM_READ:
+ case RTC_ALM_SET:
+ break;
+
+ case RTC_RD_TIME:
+ memset(&rtctm, 0, sizeof(struct rtc_time));
+ get_rtc_time(&rtc_raw, &year);
+ rtctm.tm_sec = rtc_raw.secs;
+ rtctm.tm_min = rtc_raw.mins;
+ rtctm.tm_hour = rtc_raw.hours;
+ rtctm.tm_mday = rtc_raw.mday;
+ rtctm.tm_mon = rtc_raw.mon - 1; /* month starts at 0 */
+ rtctm.tm_year = year - 1900; /* starts at 1900 */
+ return copy_to_user((void *)arg, &rtctm, sizeof(rtctm))
+ ? -EFAULT : 0;
+
+ case RTC_SET_TIME:
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ if (copy_from_user(&rtctm, (void *)arg, sizeof(rtctm)))
+ return -EFAULT;
+ rtc_raw.secs = rtctm.tm_sec;
+ rtc_raw.mins = rtctm.tm_min;
+ rtc_raw.hours = rtctm.tm_hour;
+ rtc_raw.mday = rtctm.tm_mday;
+ rtc_raw.mon = rtctm.tm_mon + 1;
+ year = rtctm.tm_year + 1900;
+ return set_rtc_time(&rtc_raw, year);
+ break;
+
+ case RTC_EPOCH_READ:
+ return put_user(1900, (unsigned long *)arg);
+
+ }
+ return -EINVAL;
+}
+
+static struct file_operations rtc_fops = {
+ .ioctl = rtc_ioctl,
+};
+
+static struct miscdevice rtc_dev = {
+ .minor = RTC_MINOR,
+ .name = "rtc",
+ .fops = &rtc_fops,
+};
+
+/* IOC / IOMD i2c driver */
+
+#define FORCE_ONES 0xdc
+#define SCL 0x02
+#define SDA 0x01
+
+/*
+ * We must preserve all non-i2c output bits in IOC_CONTROL.
+ * Note also that we need to preserve the value of SCL and
+ * SDA outputs as well (which may be different from the
+ * values read back from IOC_CONTROL).
+ */
+static u_int force_ones;
+
+static void ioc_setscl(void *data, int state)
+{
+ u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+ u_int ones = force_ones;
+
+ if (state)
+ ones |= SCL;
+ else
+ ones &= ~SCL;
+
+ force_ones = ones;
+
+ ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static void ioc_setsda(void *data, int state)
+{
+ u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+ u_int ones = force_ones;
+
+ if (state)
+ ones |= SDA;
+ else
+ ones &= ~SDA;
+
+ force_ones = ones;
+
+ ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static int ioc_getscl(void *data)
+{
+ return (ioc_readb(IOC_CONTROL) & SCL) != 0;
+}
+
+static int ioc_getsda(void *data)
+{
+ return (ioc_readb(IOC_CONTROL) & SDA) != 0;
+}
+
+static struct i2c_algo_bit_data ioc_data = {
+ .setsda = ioc_setsda,
+ .setscl = ioc_setscl,
+ .getsda = ioc_getsda,
+ .getscl = ioc_getscl,
+ .udelay = 80,
+ .mdelay = 80,
+ .timeout = 100
+};
+
+static int ioc_client_reg(struct i2c_client *client)
+{
+ if (client->driver->id == I2C_DRIVERID_PCF8583 &&
+ client->addr == 0x50) {
+ struct rtc_tm rtctm;
+ unsigned int year;
+ struct timespec tv;
+
+ rtc_client = client;
+ get_rtc_time(&rtctm, &year);
+
+ tv.tv_nsec = rtctm.cs * 10000000;
+ tv.tv_sec = mktime(year, rtctm.mon, rtctm.mday,
+ rtctm.hours, rtctm.mins, rtctm.secs);
+ do_settimeofday(&tv);
+ set_rtc = k_set_rtc_time;
+ }
+
+ return 0;
+}
+
+static int ioc_client_unreg(struct i2c_client *client)
+{
+ if (client == rtc_client) {
+ set_rtc = NULL;
+ rtc_client = NULL;
+ }
+
+ return 0;
+}
+
+static struct i2c_adapter ioc_ops = {
+ .id = I2C_HW_B_IOC,
+ .algo_data = &ioc_data,
+ .client_register = ioc_client_reg,
+ .client_unregister = ioc_client_unreg,
+};
+
+static int __init i2c_ioc_init(void)
+{
+ int ret;
+
+ force_ones = FORCE_ONES | SCL | SDA;
+
+ ret = i2c_bit_add_bus(&ioc_ops);
+
+ if (ret >= 0){
+ ret = misc_register(&rtc_dev);
+ if(ret < 0)
+ i2c_bit_del_bus(&ioc_ops);
+ }
+
+ return ret;
+}
+
+__initcall(i2c_ioc_init);
diff --git a/drivers/acorn/char/pcf8583.c b/drivers/acorn/char/pcf8583.c
new file mode 100644
index 000000000000..ad7ae7ab8920
--- /dev/null
+++ b/drivers/acorn/char/pcf8583.c
@@ -0,0 +1,239 @@
+/*
+ * linux/drivers/acorn/char/pcf8583.c
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for PCF8583 RTC & RAM chip
+ */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/mc146818rtc.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/bcd.h>
+
+#include "pcf8583.h"
+
+static struct i2c_driver pcf8583_driver;
+
+static unsigned short ignore[] = { I2C_CLIENT_END };
+static unsigned short normal_addr[] = { 0x50, I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+ .normal_i2c = normal_addr,
+ .normal_i2c_range = ignore,
+ .probe = ignore,
+ .probe_range = ignore,
+ .ignore = ignore,
+ .ignore_range = ignore,
+ .force = ignore,
+};
+
+#define DAT(x) ((unsigned int)(x->dev.driver_data))
+
+static int
+pcf8583_attach(struct i2c_adapter *adap, int addr, int kind)
+{
+ struct i2c_client *c;
+ unsigned char buf[1], ad[1] = { 0 };
+ struct i2c_msg msgs[2] = {
+ { addr, 0, 1, ad },
+ { addr, I2C_M_RD, 1, buf }
+ };
+
+ c = kmalloc(sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return -ENOMEM;
+
+ memset(c, 0, sizeof(*c));
+ c->addr = addr;
+ c->adapter = adap;
+ c->driver = &pcf8583_driver;
+
+ if (i2c_transfer(c->adapter, msgs, 2) == 2)
+ DAT(c) = buf[0];
+
+ return i2c_attach_client(c);
+}
+
+static int
+pcf8583_probe(struct i2c_adapter *adap)
+{
+ return i2c_probe(adap, &addr_data, pcf8583_attach);
+}
+
+static int
+pcf8583_detach(struct i2c_client *client)
+{
+ i2c_detach_client(client);
+ kfree(client);
+ return 0;
+}
+
+static int
+pcf8583_get_datetime(struct i2c_client *client, struct rtc_tm *dt)
+{
+ unsigned char buf[8], addr[1] = { 1 };
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 1, addr },
+ { client->addr, I2C_M_RD, 6, buf }
+ };
+ int ret = -EIO;
+
+ memset(buf, 0, sizeof(buf));
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret == 2) {
+ dt->year_off = buf[4] >> 6;
+ dt->wday = buf[5] >> 5;
+
+ buf[4] &= 0x3f;
+ buf[5] &= 0x1f;
+
+ dt->cs = BCD_TO_BIN(buf[0]);
+ dt->secs = BCD_TO_BIN(buf[1]);
+ dt->mins = BCD_TO_BIN(buf[2]);
+ dt->hours = BCD_TO_BIN(buf[3]);
+ dt->mday = BCD_TO_BIN(buf[4]);
+ dt->mon = BCD_TO_BIN(buf[5]);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int
+pcf8583_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo)
+{
+ unsigned char buf[8];
+ int ret, len = 6;
+
+ buf[0] = 0;
+ buf[1] = DAT(client) | 0x80;
+ buf[2] = BIN_TO_BCD(dt->cs);
+ buf[3] = BIN_TO_BCD(dt->secs);
+ buf[4] = BIN_TO_BCD(dt->mins);
+ buf[5] = BIN_TO_BCD(dt->hours);
+
+ if (datetoo) {
+ len = 8;
+ buf[6] = BIN_TO_BCD(dt->mday) | (dt->year_off << 6);
+ buf[7] = BIN_TO_BCD(dt->mon) | (dt->wday << 5);
+ }
+
+ ret = i2c_master_send(client, (char *)buf, len);
+ if (ret == len)
+ ret = 0;
+
+ buf[1] = DAT(client);
+ i2c_master_send(client, (char *)buf, 2);
+
+ return ret;
+}
+
+static int
+pcf8583_get_ctrl(struct i2c_client *client, unsigned char *ctrl)
+{
+ *ctrl = DAT(client);
+ return 0;
+}
+
+static int
+pcf8583_set_ctrl(struct i2c_client *client, unsigned char *ctrl)
+{
+ unsigned char buf[2];
+
+ buf[0] = 0;
+ buf[1] = *ctrl;
+ DAT(client) = *ctrl;
+
+ return i2c_master_send(client, (char *)buf, 2);
+}
+
+static int
+pcf8583_read_mem(struct i2c_client *client, struct mem *mem)
+{
+ unsigned char addr[1];
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 1, addr },
+ { client->addr, I2C_M_RD, 0, mem->data }
+ };
+
+ if (mem->loc < 8)
+ return -EINVAL;
+
+ addr[0] = mem->loc;
+ msgs[1].len = mem->nr;
+
+ return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
+}
+
+static int
+pcf8583_write_mem(struct i2c_client *client, struct mem *mem)
+{
+ unsigned char addr[1];
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 1, addr },
+ { client->addr, 0, 0, mem->data }
+ };
+
+ if (mem->loc < 8)
+ return -EINVAL;
+
+ addr[0] = mem->loc;
+ msgs[1].len = mem->nr;
+
+ return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
+}
+
+static int
+pcf8583_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case RTC_GETDATETIME:
+ return pcf8583_get_datetime(client, arg);
+
+ case RTC_SETTIME:
+ return pcf8583_set_datetime(client, arg, 0);
+
+ case RTC_SETDATETIME:
+ return pcf8583_set_datetime(client, arg, 1);
+
+ case RTC_GETCTRL:
+ return pcf8583_get_ctrl(client, arg);
+
+ case RTC_SETCTRL:
+ return pcf8583_set_ctrl(client, arg);
+
+ case MEM_READ:
+ return pcf8583_read_mem(client, arg);
+
+ case MEM_WRITE:
+ return pcf8583_write_mem(client, arg);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static struct i2c_driver pcf8583_driver = {
+ .name = "PCF8583",
+ .id = I2C_DRIVERID_PCF8583,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = pcf8583_probe,
+ .detach_client = pcf8583_detach,
+ .command = pcf8583_command
+};
+
+static __init int pcf8583_init(void)
+{
+ return i2c_add_driver(&pcf8583_driver);
+}
+
+__initcall(pcf8583_init);
diff --git a/drivers/acorn/char/pcf8583.h b/drivers/acorn/char/pcf8583.h
new file mode 100644
index 000000000000..847f7fdb8763
--- /dev/null
+++ b/drivers/acorn/char/pcf8583.h
@@ -0,0 +1,41 @@
+/*
+ * linux/drivers/acorn/char/pcf8583.h
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct rtc_tm {
+ unsigned char cs;
+ unsigned char secs;
+ unsigned char mins;
+ unsigned char hours;
+ unsigned char mday;
+ unsigned char mon;
+ unsigned char year_off;
+ unsigned char wday;
+};
+
+struct mem {
+ unsigned int loc;
+ unsigned int nr;
+ unsigned char *data;
+};
+
+#define RTC_GETDATETIME 0
+#define RTC_SETTIME 1
+#define RTC_SETDATETIME 2
+#define RTC_GETCTRL 3
+#define RTC_SETCTRL 4
+#define MEM_READ 5
+#define MEM_WRITE 6
+
+#define CTRL_STOP 0x80
+#define CTRL_HOLD 0x40
+#define CTRL_32KHZ 0x00
+#define CTRL_MASK 0x08
+#define CTRL_ALARMEN 0x04
+#define CTRL_ALARM 0x02
+#define CTRL_TIMER 0x01