summaryrefslogtreecommitdiff
path: root/drivers/acpi/acpi_lpss.c
diff options
context:
space:
mode:
authorSrinidhi Kasagar <srinidhi.kasagar@intel.com>2015-08-27 19:00:55 +0300
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2015-08-27 19:46:54 +0300
commitb00855aecbb166428c67b26e1bfeb675463a0212 (patch)
tree04d7ed41edc38e2450173b6df4196b34c770e536 /drivers/acpi/acpi_lpss.c
parentc13dcf9f2d6f5f06ef1bf79ec456df614c5e058b (diff)
downloadlinux-b00855aecbb166428c67b26e1bfeb675463a0212.tar.xz
ACPI / LPSS: Ignore 10ms delay for Braswell
LPSS devices in Braswell does not need the default 10ms d3_delay imposed by PCI specification. Removing this unnecessary delay significantly reduces the resume time approximately upto 200ms on this platform. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/acpi/acpi_lpss.c')
-rw-r--r--drivers/acpi/acpi_lpss.c38
1 files changed, 32 insertions, 6 deletions
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 46b58abb08c5..10020e04f574 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -60,6 +60,7 @@ ACPI_MODULE_NAME("acpi_lpss");
#define LPSS_CLK_DIVIDER BIT(2)
#define LPSS_LTR BIT(3)
#define LPSS_SAVE_CTX BIT(4)
+#define LPSS_NO_D3_DELAY BIT(5)
struct lpss_private_data;
@@ -156,6 +157,10 @@ static const struct lpss_device_desc byt_pwm_dev_desc = {
.flags = LPSS_SAVE_CTX,
};
+static const struct lpss_device_desc bsw_pwm_dev_desc = {
+ .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
+};
+
static const struct lpss_device_desc byt_uart_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
.clk_con_id = "baudclk",
@@ -163,6 +168,14 @@ static const struct lpss_device_desc byt_uart_dev_desc = {
.setup = lpss_uart_setup,
};
+static const struct lpss_device_desc bsw_uart_dev_desc = {
+ .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
+ | LPSS_NO_D3_DELAY,
+ .clk_con_id = "baudclk",
+ .prv_offset = 0x800,
+ .setup = lpss_uart_setup,
+};
+
static const struct lpss_device_desc byt_spi_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
.prv_offset = 0x400,
@@ -178,8 +191,15 @@ static const struct lpss_device_desc byt_i2c_dev_desc = {
.setup = byt_i2c_setup,
};
+static const struct lpss_device_desc bsw_i2c_dev_desc = {
+ .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
+ .prv_offset = 0x800,
+ .setup = byt_i2c_setup,
+};
+
static struct lpss_device_desc bsw_spi_dev_desc = {
- .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
+ | LPSS_NO_D3_DELAY,
.prv_offset = 0x400,
.setup = lpss_deassert_reset,
};
@@ -214,11 +234,12 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
{ "INT33FC", },
/* Braswell LPSS devices */
- { "80862288", LPSS_ADDR(byt_pwm_dev_desc) },
- { "8086228A", LPSS_ADDR(byt_uart_dev_desc) },
+ { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
+ { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
{ "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
- { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) },
+ { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
+ /* Broadwell LPSS devices */
{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
{ "INT3431", LPSS_ADDR(lpt_dev_desc) },
{ "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
@@ -558,9 +579,14 @@ static void acpi_lpss_restore_ctx(struct device *dev,
* The following delay is needed or the subsequent write operations may
* fail. The LPSS devices are actually PCI devices and the PCI spec
* expects 10ms delay before the device can be accessed after D3 to D0
- * transition.
+ * transition. However some platforms like BSW does not need this delay.
*/
- msleep(10);
+ unsigned int delay = 10; /* default 10ms delay */
+
+ if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
+ delay = 0;
+
+ msleep(delay);
for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
unsigned long offset = i * sizeof(u32);