diff options
author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2017-06-05 11:39:19 +0300 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2017-06-12 15:58:39 +0300 |
commit | 97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f (patch) | |
tree | e9ae63beb8b3e3b2cbf1a07c91b31c19c4d55a76 /drivers/acpi/acpica/rsdumpinfo.c | |
parent | 2b72693066a867ac073a657e871bb64391b4ffdb (diff) | |
download | linux-97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f.tar.xz |
ACPICA: ACPI 6.2: Add support for PinConfig() resource
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906
ACPI 6.2 introduced a new resource that is used to specify fine-grained
configuration of a pin or set of pins used by a device. The ASL syntax of
this new resource looks like:
PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue,
ResourceSource, ResourceSourceIndex, ResourceUsage,
DescriptorName, Vendordata) {Pin List}
PinConfigType is an integer with following accepted values:
0x00 (Default) - No configuration is applied to the pin
0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor
0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor
0x03 (Bias Default) - Set to default biasing
0x04 (Bias Disable) - All bias settings will be disabled
0x05 (Bias High Impedance) - Configure the pin as hi_z
0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where
it drives the last value on a tristate bus
0x07 (Drive Open Drain) - Configure the pin into open drain state
0x08 (Drive Open Source) - Configure the pin into open source state
0x09 (Drive Push Pull) - Configure the pin into push-pull state
0x0a (Drive Strength) - How much the pin can supply current
0x0b (Slew Rate) - Configure slew rate of the pin
0x0c (Input Debounce) - Enable input debouncer for the pin
0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin
0x0e - 0x7f - Reserved
0x80 - 0xff - Vendor defined types
The PinConfigValue depends on the type and is expressed as units
suitable for that type (for example bias uses Ohms).
Link: https://github.com/acpica/acpica/commit/a06fdba6
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/acpi/acpica/rsdumpinfo.c')
-rw-r--r-- | drivers/acpi/acpica/rsdumpinfo.c | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/rsdumpinfo.c b/drivers/acpi/acpica/rsdumpinfo.c index afc0441f7dfb..e68472248fff 100644 --- a/drivers/acpi/acpica/rsdumpinfo.c +++ b/drivers/acpi/acpica/rsdumpinfo.c @@ -337,6 +337,31 @@ struct acpi_rsdump_info acpi_rs_dump_pin_function[10] = { "VendorData", NULL}, }; +struct acpi_rsdump_info acpi_rs_dump_pin_config[11] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_pin_config), + "PinConfig", NULL}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(pin_config.revision_id), "RevisionId", + NULL}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(pin_config.producer_consumer), + "ProducerConsumer", acpi_gbl_consume_decode}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(pin_config.sharable), "Sharing", + acpi_gbl_shr_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(pin_config.pin_config_type), + "PinConfigType", NULL}, + {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(pin_config.pin_config_value), + "PinConfigValue", NULL}, + {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(pin_config.resource_source), + "ResourceSource", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(pin_config.pin_table_length), + "PinTableLength", NULL}, + {ACPI_RSD_WORDLIST, ACPI_RSD_OFFSET(pin_config.pin_table), "PinTable", + NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(pin_config.vendor_length), + "VendorLength", NULL}, + {ACPI_RSD_SHORTLISTX, ACPI_RSD_OFFSET(pin_config.vendor_data), + "VendorData", NULL}, +}; + struct acpi_rsdump_info acpi_rs_dump_fixed_dma[4] = { {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_dma), "FixedDma", NULL}, |