summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_rdc.c
diff options
context:
space:
mode:
authorAlan Cox <alan@linux.intel.com>2009-06-24 21:29:44 +0400
committerJeff Garzik <jgarzik@redhat.com>2009-09-02 03:47:20 +0400
commit6b406782ad0408f9cb480c2e1b543d194e8206d0 (patch)
tree4082136fd79b5300abfa9f26d3283b6a13640cb3 /drivers/ata/pata_rdc.c
parent87c8b22be201cc4c139f98ef5e0471dd15c01239 (diff)
downloadlinux-6b406782ad0408f9cb480c2e1b543d194e8206d0.tar.xz
[libata] Add pata_rdc driver for RDC ATA devices
From: Alan Cox <alan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/pata_rdc.c')
-rw-r--r--drivers/ata/pata_rdc.c400
1 files changed, 400 insertions, 0 deletions
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
new file mode 100644
index 000000000000..c843a1e07c4f
--- /dev/null
+++ b/drivers/ata/pata_rdc.c
@@ -0,0 +1,400 @@
+/*
+ * pata_rdc - Driver for later RDC PATA controllers
+ *
+ * This is actually a driver for hardware meeting
+ * INCITS 370-2004 (1510D): ATA Host Adapter Standards
+ *
+ * Based on ata_piix.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/dmi.h>
+
+#define DRV_NAME "pata_rdc"
+#define DRV_VERSION "0.01"
+
+struct rdc_host_priv {
+ u32 saved_iocfg;
+};
+
+/**
+ * rdc_pata_cable_detect - Probe host controller cable detect info
+ * @ap: Port for which cable detect info is desired
+ *
+ * Read 80c cable indicator from ATA PCI device's PCI config
+ * register. This register is normally set by firmware (BIOS).
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static int rdc_pata_cable_detect(struct ata_port *ap)
+{
+ struct rdc_host_priv *hpriv = ap->host->private_data;
+ u8 mask;
+
+ /* check BIOS cable detect results */
+ mask = 0x30 << (2 * ap->port_no);
+ if ((hpriv->saved_iocfg & mask) == 0)
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * rdc_pata_prereset - prereset for PATA host controller
+ * @link: Target link
+ * @deadline: deadline jiffies for the operation
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ static const struct pci_bits rdc_enable_bits[] = {
+ { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
+ { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
+ };
+
+ if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
+ return -ENOENT;
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
+ * rdc_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: um
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned int is_slave = (adev->devno != 0);
+ unsigned int master_port= ap->port_no ? 0x42 : 0x40;
+ unsigned int slave_port = 0x44;
+ u16 master_data;
+ u8 slave_data;
+ u8 udma_enable;
+ int control = 0;
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ if (pio >= 2)
+ control |= 1; /* TIME1 enable */
+ if (ata_pio_need_iordy(adev))
+ control |= 2; /* IE enable */
+
+ if (adev->class == ATA_DEV_ATA)
+ control |= 4; /* PPE enable */
+
+ /* PIO configuration clears DTE unconditionally. It will be
+ * programmed in set_dmamode which is guaranteed to be called
+ * after set_piomode if any DMA mode is available.
+ */
+ pci_read_config_word(dev, master_port, &master_data);
+ if (is_slave) {
+ /* clear TIME1|IE1|PPE1|DTE1 */
+ master_data &= 0xff0f;
+ /* Enable SITRE (separate slave timing register) */
+ master_data |= 0x4000;
+ /* enable PPE1, IE1 and TIME1 as needed */
+ master_data |= (control << 4);
+ pci_read_config_byte(dev, slave_port, &slave_data);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
+ /* Load the timing nibble for this slave */
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
+ << (ap->port_no ? 4 : 0);
+ } else {
+ /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
+ master_data &= 0xccf0;
+ /* Enable PPE, IE and TIME as appropriate */
+ master_data |= control;
+ /* load ISP and RCT */
+ master_data |=
+ (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ }
+ pci_write_config_word(dev, master_port, master_data);
+ if (is_slave)
+ pci_write_config_byte(dev, slave_port, slave_data);
+
+ /* Ensure the UDMA bit is off - it will be turned back on if
+ UDMA is selected */
+
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+ udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
+ pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+/**
+ * rdc_set_dmamode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Drive in question
+ *
+ * Set UDMA mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ u8 master_port = ap->port_no ? 0x42 : 0x40;
+ u16 master_data;
+ u8 speed = adev->dma_mode;
+ int devid = adev->devno + 2 * ap->port_no;
+ u8 udma_enable = 0;
+
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ pci_read_config_word(dev, master_port, &master_data);
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+
+ if (speed >= XFER_UDMA_0) {
+ unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+ u16 udma_timing;
+ u16 ideconf;
+ int u_clock, u_speed;
+
+ /*
+ * UDMA is handled by a combination of clock switching and
+ * selection of dividers
+ *
+ * Handy rule: Odd modes are UDMATIMx 01, even are 02
+ * except UDMA0 which is 00
+ */
+ u_speed = min(2 - (udma & 1), udma);
+ if (udma == 5)
+ u_clock = 0x1000; /* 100Mhz */
+ else if (udma > 2)
+ u_clock = 1; /* 66Mhz */
+ else
+ u_clock = 0; /* 33Mhz */
+
+ udma_enable |= (1 << devid);
+
+ /* Load the CT/RP selection */
+ pci_read_config_word(dev, 0x4A, &udma_timing);
+ udma_timing &= ~(3 << (4 * devid));
+ udma_timing |= u_speed << (4 * devid);
+ pci_write_config_word(dev, 0x4A, udma_timing);
+
+ /* Select a 33/66/100Mhz clock */
+ pci_read_config_word(dev, 0x54, &ideconf);
+ ideconf &= ~(0x1001 << devid);
+ ideconf |= u_clock << devid;
+ pci_write_config_word(dev, 0x54, ideconf);
+ } else {
+ /*
+ * MWDMA is driven by the PIO timings. We must also enable
+ * IORDY unconditionally along with TIME1. PPE has already
+ * been set when the PIO timing was set.
+ */
+ unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
+ unsigned int control;
+ u8 slave_data;
+ const unsigned int needed_pio[3] = {
+ XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
+ };
+ int pio = needed_pio[mwdma] - XFER_PIO_0;
+
+ control = 3; /* IORDY|TIME1 */
+
+ /* If the drive MWDMA is faster than it can do PIO then
+ we must force PIO into PIO0 */
+
+ if (adev->pio_mode < needed_pio[mwdma])
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
+
+ if (adev->devno) { /* Slave */
+ master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
+ master_data |= control << 4;
+ pci_read_config_byte(dev, 0x44, &slave_data);
+ slave_data &= (ap->port_no ? 0x0f : 0xf0);
+ /* Load the matching timing */
+ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+ pci_write_config_byte(dev, 0x44, slave_data);
+ } else { /* Master */
+ master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
+ and master timing bits */
+ master_data |= control;
+ master_data |=
+ (timings[pio][0] << 12) |
+ (timings[pio][1] << 8);
+ }
+
+ udma_enable &= ~(1 << devid);
+ pci_write_config_word(dev, master_port, master_data);
+ }
+ pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+static struct ata_port_operations rdc_pata_ops = {
+ .inherits = &ata_bmdma32_port_ops,
+ .cable_detect = rdc_pata_cable_detect,
+ .set_piomode = rdc_set_piomode,
+ .set_dmamode = rdc_set_dmamode,
+ .prereset = rdc_pata_prereset,
+};
+
+static struct ata_port_info rdc_port_info = {
+
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &rdc_pata_ops,
+};
+
+static struct scsi_host_template rdc_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+/**
+ * rdc_init_one - Register PIIX ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in rdc_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer. We probe for combined mode (sigh),
+ * and then hand over control to libata, for it to do the rest.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int __devinit rdc_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct device *dev = &pdev->dev;
+ struct ata_port_info port_info[2];
+ const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
+ unsigned long port_flags;
+ struct ata_host *host;
+ struct rdc_host_priv *hpriv;
+ int rc;
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
+
+ port_info[0] = rdc_port_info;
+ port_info[1] = rdc_port_info;
+
+ port_flags = port_info[0].flags;
+
+ /* enable device and prepare host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+
+ /* Save IOCFG, this will be used for cable detection, quirk
+ * detection and restoration on detach.
+ */
+ pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ host->private_data = hpriv;
+
+ pci_intx(pdev, 1);
+
+ host->flags |= ATA_HOST_PARALLEL_SCAN;
+
+ pci_set_master(pdev);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht);
+}
+
+static void rdc_remove_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct rdc_host_priv *hpriv = host->private_data;
+
+ pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
+
+ ata_pci_remove_one(pdev);
+}
+
+static const struct pci_device_id rdc_pci_tbl[] = {
+ { PCI_DEVICE(0x17F3, 0x1011), },
+ { PCI_DEVICE(0x17F3, 0x1012), },
+ { } /* terminate list */
+};
+
+static struct pci_driver rdc_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rdc_pci_tbl,
+ .probe = rdc_init_one,
+ .remove = rdc_remove_one,
+};
+
+
+static int __init rdc_init(void)
+{
+ return pci_register_driver(&rdc_pci_driver);
+}
+
+static void __exit rdc_exit(void)
+{
+ pci_unregister_driver(&rdc_pci_driver);
+}
+
+module_init(rdc_init);
+module_exit(rdc_exit);
+
+MODULE_AUTHOR("Alan Cox (based on ata_piix)");
+MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
+MODULE_VERSION(DRV_VERSION);