summaryrefslogtreecommitdiff
path: root/drivers/base
diff options
context:
space:
mode:
authorPatrick Mochel <mochel@digitalimplant.org>2005-04-06 10:46:33 +0400
committerGreg Kroah-Hartman <gregkh@suse.de>2005-06-21 02:15:27 +0400
commit0d3e5a2e39b6ba2974e9e7c2a429018c45de8e76 (patch)
tree30e584b73c356adce49dcc9df75332abaef95470 /drivers/base
parentb86c1df1f98d16c999423a3907eb40a9423f481e (diff)
downloadlinux-0d3e5a2e39b6ba2974e9e7c2a429018c45de8e76.tar.xz
[PATCH] Driver Core: fix bk-driver-core kills ppc64
There's no check to see if the device is already bound to a driver, which could do bad things. The first thing to go wrong is that it will try to match a driver with a device already bound to one. In some cases (it appears with USB with drivers/usb/core/usb.c::usb_match_id()), some drivers will match a device based on the class type, so it would be common (especially for HID devices) to match a device that is already bound. The fun comes when ->probe() is called, it fails, then driver_probe_device() does this: dev->driver = NULL; Later on, that pointer could be be dereferenced without checking and cause hell to break loose. This problem could be nasty. It's very hardware dependent, since some devices could have a different set of matching qualifiers than others. Now, I don't quite see exactly where/how you were getting that crash. You're dereferencing bad memory, but I'm not sure which pointer was bad and where it came from, but it could have come from a couple of different places. The patch below will hopefully fix it all up for you. It's against 2.6.12-rc2-mm1, and does the following: - Move logic to driver_probe_device() and comments uncommon returns: 1 - If device is bound 0 - If device not bound, and no error error - If there was an error. - Move locking to caller of that function, since we want to lock a device for the entire time we're trying to bind it to a driver (to prevent against a driver being loaded at the same time). - Update __device_attach() and __driver_attach() to do that locking. - Check if device is already bound in __driver_attach() - Update the converse device_release_driver() so it locks the device around all of the operations. - Mark driver_probe_device() as static and remove export. It's an internal function, it should stay that way, and there are no other callers. If there is ever a need to export it, we can audit it as necessary. Signed-off-by: Andrew Morton <akpm@osdl.org>
Diffstat (limited to 'drivers/base')
-rw-r--r--drivers/base/dd.c142
1 files changed, 74 insertions, 68 deletions
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index dd2a8a79c121..8510918109e0 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -35,6 +35,8 @@
* nor take the bus's rwsem. Please verify those are accounted
* for before calling this. (It is ok to call with no other effort
* from a driver's probe() method.)
+ *
+ * This function must be called with @dev->sem held.
*/
void device_bind_driver(struct device * dev)
{
@@ -57,54 +59,56 @@ void device_bind_driver(struct device * dev)
* because we don't know the format of the ID structures, nor what
* is to be considered a match and what is not.
*
- * If we find a match, we call @drv->probe(@dev) if it exists, and
- * call device_bind_driver() above.
+ *
+ * This function returns 1 if a match is found, an error if one
+ * occurs (that is not -ENODEV or -ENXIO), and 0 otherwise.
+ *
+ * This function must be called with @dev->sem held.
*/
-int driver_probe_device(struct device_driver * drv, struct device * dev)
+static int driver_probe_device(struct device_driver * drv, struct device * dev)
{
- int error = 0;
+ int ret = 0;
if (drv->bus->match && !drv->bus->match(dev, drv))
- return -ENODEV;
+ goto Done;
- down(&dev->sem);
+ pr_debug("%s: Matched Device %s with Driver %s\n",
+ drv->bus->name, dev->bus_id, drv->name);
dev->driver = drv;
if (drv->probe) {
- error = drv->probe(dev);
- if (error) {
+ ret = drv->probe(dev);
+ if (ret) {
dev->driver = NULL;
- up(&dev->sem);
- return error;
+ goto ProbeFailed;
}
}
- up(&dev->sem);
device_bind_driver(dev);
- return 0;
+ ret = 1;
+ pr_debug("%s: Bound Device %s to Driver %s\n",
+ drv->bus->name, dev->bus_id, drv->name);
+ goto Done;
+
+ ProbeFailed:
+ if (ret == -ENODEV || ret == -ENXIO) {
+ /* Driver matched, but didn't support device
+ * or device not found.
+ * Not an error; keep going.
+ */
+ ret = 0;
+ } else {
+ /* driver matched but the probe failed */
+ printk(KERN_WARNING
+ "%s: probe of %s failed with error %d\n",
+ drv->name, dev->bus_id, ret);
+ }
+ Done:
+ return ret;
}
static int __device_attach(struct device_driver * drv, void * data)
{
struct device * dev = data;
- int error;
-
- error = driver_probe_device(drv, dev);
- if (error) {
- if ((error == -ENODEV) || (error == -ENXIO)) {
- /* Driver matched, but didn't support device
- * or device not found.
- * Not an error; keep going.
- */
- error = 0;
- } else {
- /* driver matched but the probe failed */
- printk(KERN_WARNING
- "%s: probe of %s failed with error %d\n",
- drv->name, dev->bus_id, error);
- }
- return error;
- }
- /* stop looking, this device is attached */
- return 1;
+ return driver_probe_device(drv, dev);
}
/**
@@ -114,37 +118,43 @@ static int __device_attach(struct device_driver * drv, void * data)
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
+ *
+ * Returns 1 if the device was bound to a driver; 0 otherwise.
*/
int device_attach(struct device * dev)
{
+ int ret = 0;
+
+ down(&dev->sem);
if (dev->driver) {
device_bind_driver(dev);
- return 1;
- }
-
- return bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
+ ret = 1;
+ } else
+ ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
+ up(&dev->sem);
+ return ret;
}
static int __driver_attach(struct device * dev, void * data)
{
struct device_driver * drv = data;
- int error = 0;
-
- if (!dev->driver) {
- error = driver_probe_device(drv, dev);
- if (error) {
- if (error != -ENODEV) {
- /* driver matched but the probe failed */
- printk(KERN_WARNING
- "%s: probe of %s failed with error %d\n",
- drv->name, dev->bus_id, error);
- } else
- error = 0;
- return error;
- }
- /* stop looking, this driver is attached */
- return 1;
- }
+
+ /*
+ * Lock device and try to bind to it. We drop the error
+ * here and always return 0, because we need to keep trying
+ * to bind to devices and some drivers will return an error
+ * simply if it didn't support the device.
+ *
+ * driver_probe_device() will spit a warning if there
+ * is an error.
+ */
+
+ down(&dev->sem);
+ if (!dev->driver)
+ driver_probe_device(drv, dev);
+ up(&dev->sem);
+
+
return 0;
}
@@ -156,9 +166,6 @@ static int __driver_attach(struct device * dev, void * data)
* match the driver with each one. If driver_probe_device()
* returns 0 and the @dev->driver is set, we've found a
* compatible pair.
- *
- * Note that we ignore the -ENODEV error from driver_probe_device(),
- * since it's perfectly valid for a driver not to bind to any devices.
*/
void driver_attach(struct device_driver * drv)
{
@@ -176,19 +183,19 @@ void driver_attach(struct device_driver * drv)
*/
void device_release_driver(struct device * dev)
{
- struct device_driver * drv = dev->driver;
-
- if (!drv)
- return;
-
- sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
- sysfs_remove_link(&dev->kobj, "driver");
- klist_del(&dev->knode_driver);
+ struct device_driver * drv;
down(&dev->sem);
- if (drv->remove)
- drv->remove(dev);
- dev->driver = NULL;
+ if (dev->driver) {
+ drv = dev->driver;
+ sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
+ sysfs_remove_link(&dev->kobj, "driver");
+ klist_del(&dev->knode_driver);
+
+ if (drv->remove)
+ drv->remove(dev);
+ dev->driver = NULL;
+ }
up(&dev->sem);
}
@@ -208,7 +215,6 @@ void driver_detach(struct device_driver * drv)
}
-EXPORT_SYMBOL_GPL(driver_probe_device);
EXPORT_SYMBOL_GPL(device_bind_driver);
EXPORT_SYMBOL_GPL(device_release_driver);
EXPORT_SYMBOL_GPL(device_attach);