diff options
author | Tedd Ho-Jeong An <tedd.an@intel.com> | 2021-08-05 03:32:15 +0300 |
---|---|---|
committer | Marcel Holtmann <marcel@holtmann.org> | 2021-08-05 17:03:29 +0300 |
commit | 019a1caa7fd2c9bb689f9a15fe8cb1d53aa6d8b8 (patch) | |
tree | 15e4ed231a020343ac79ab308f268b1b67b37e76 /drivers/bluetooth/btusb.c | |
parent | 553807141a1e4088e657e57ece890d9263d8070c (diff) | |
download | linux-019a1caa7fd2c9bb689f9a15fe8cb1d53aa6d8b8.tar.xz |
Bluetooth: btintel: Refactoring setup routine for bootloader devices
This patch refactors the setup routines for legacy and TLV based
bootloader devices to the combined setup, and move the related functions
from btusb to btintel.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/bluetooth/btusb.c')
-rw-r--r-- | drivers/bluetooth/btusb.c | 737 |
1 files changed, 19 insertions, 718 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3ed552d80b66..26863d8c1337 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -48,7 +48,6 @@ static struct usb_driver btusb_driver; #define BTUSB_BCM_PATCHRAM 0x400 #define BTUSB_MARVELL 0x800 #define BTUSB_SWAVE 0x1000 -#define BTUSB_INTEL_NEW 0x2000 #define BTUSB_AMP 0x4000 #define BTUSB_QCA_ROME 0x8000 #define BTUSB_BCM_APPLE 0x10000 @@ -60,7 +59,6 @@ static struct usb_driver btusb_driver; #define BTUSB_WIDEBAND_SPEECH 0x400000 #define BTUSB_VALID_LE_STATES 0x800000 #define BTUSB_QCA_WCN6855 0x1000000 -#define BTUSB_INTEL_NEWGEN 0x2000000 #define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000 static const struct usb_device_id btusb_table[] = { @@ -360,27 +358,27 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL }, /* Intel Bluetooth devices */ - { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, - { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, - { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, - { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEWGEN | + { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH}, - { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEWGEN | + { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_INTEL_BROKEN_INITIAL_NCMD }, { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED }, - { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, - { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, @@ -1999,49 +1997,21 @@ static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer, int count) { + struct hci_dev *hdev = data->hdev; + /* When the device is in bootloader mode, then it can send * events via the bulk endpoint. These events are treated the * same way as the ones received from the interrupt endpoint. */ - if (test_bit(BTUSB_BOOTLOADER, &data->flags)) + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) return btusb_recv_intr(data, buffer, count); return btusb_recv_bulk(data, buffer, count); } -static void btusb_intel_bootup(struct btusb_data *data, const void *ptr, - unsigned int len) -{ - const struct intel_bootup *evt = ptr; - - if (len != sizeof(*evt)) - return; - - if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) - wake_up_bit(&data->flags, BTUSB_BOOTING); -} - -static void btusb_intel_secure_send_result(struct btusb_data *data, - const void *ptr, unsigned int len) -{ - const struct intel_secure_send_result *evt = ptr; - - if (len != sizeof(*evt)) - return; - - if (evt->result) - set_bit(BTUSB_FIRMWARE_FAILED, &data->flags); - - if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) && - test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) - wake_up_bit(&data->flags, BTUSB_DOWNLOADING); -} - static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) { - struct btusb_data *data = hci_get_drvdata(hdev); - - if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { struct hci_event_hdr *hdr = (void *)skb->data; if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff && @@ -2055,7 +2025,7 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) * the device sends a vendor specific event * indicating that the bootup completed. */ - btusb_intel_bootup(data, ptr, len); + btintel_bootup(hdev, ptr, len); break; case 0x06: /* When the firmware loading completes the @@ -2063,7 +2033,7 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) * indicating the result of the firmware * loading. */ - btusb_intel_secure_send_result(data, ptr, len); + btintel_secure_send_result(hdev, ptr, len); break; } } @@ -2074,14 +2044,13 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) { - struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; BT_DBG("%s", hdev->name); switch (hci_skb_pkt_type(skb)) { case HCI_COMMAND_PKT: - if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { struct hci_command_hdr *cmd = (void *)skb->data; __u16 opcode = le16_to_cpu(cmd->opcode); @@ -2133,641 +2102,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) return -EILSEQ; } -static int btusb_setup_intel_new_get_fw_name(struct intel_version *ver, - struct intel_boot_params *params, - char *fw_name, size_t len, - const char *suffix) -{ - switch (ver->hw_variant) { - case 0x0b: /* SfP */ - case 0x0c: /* WsP */ - snprintf(fw_name, len, "intel/ibt-%u-%u.%s", - le16_to_cpu(ver->hw_variant), - le16_to_cpu(params->dev_revid), - suffix); - break; - case 0x11: /* JfP */ - case 0x12: /* ThP */ - case 0x13: /* HrP */ - case 0x14: /* CcP */ - snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s", - le16_to_cpu(ver->hw_variant), - le16_to_cpu(ver->hw_revision), - le16_to_cpu(ver->fw_revision), - suffix); - break; - default: - return -EINVAL; - } - - return 0; -} - -static void btusb_setup_intel_newgen_get_fw_name(const struct intel_version_tlv *ver_tlv, - char *fw_name, size_t len, - const char *suffix) -{ - /* The firmware file name for new generation controllers will be - * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> - */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", - INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver_tlv->cnvi_top), - INTEL_CNVX_TOP_STEP(ver_tlv->cnvi_top)), - INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver_tlv->cnvr_top), - INTEL_CNVX_TOP_STEP(ver_tlv->cnvr_top)), - suffix); -} - -static int btusb_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t delta, rettime; - unsigned long long duration; - int err; - - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - - bt_dev_info(hdev, "Waiting for firmware download to complete"); - - err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING, - TASK_INTERRUPTIBLE, - msecs_to_jiffies(msec)); - if (err == -EINTR) { - bt_dev_err(hdev, "Firmware loading interrupted"); - return err; - } - - if (err) { - bt_dev_err(hdev, "Firmware loading timeout"); - return -ETIMEDOUT; - } - - if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) { - bt_dev_err(hdev, "Firmware loading failed"); - return -ENOEXEC; - } - - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - duration = (unsigned long long)ktime_to_ns(delta) >> 10; - - bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration); - - return 0; -} - -static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev, - struct intel_version_tlv *ver, - u32 *boot_param) -{ - const struct firmware *fw; - char fwname[64]; - int err; - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t calltime; - - if (!ver || !boot_param) - return -EINVAL; - - /* The firmware variant determines if the device is in bootloader - * mode or is running operational firmware. The value 0x03 identifies - * the bootloader and the value 0x23 identifies the operational - * firmware. - * - * When the operational firmware is already present, then only - * the check for valid Bluetooth device address is needed. This - * determines if the device will be added as configured or - * unconfigured controller. - * - * It is not possible to use the Secure Boot Parameters in this - * case since that command is only available in bootloader mode. - */ - if (ver->img_type == 0x03) { - clear_bit(BTUSB_BOOTLOADER, &data->flags); - btintel_check_bdaddr(hdev); - } - - /* If the OTP has no valid Bluetooth device address, then there will - * also be no valid address for the operational firmware. - */ - if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) { - bt_dev_info(hdev, "No device address configured"); - set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); - } - - btusb_setup_intel_newgen_get_fw_name(ver, fwname, sizeof(fwname), "sfi"); - err = firmware_request_nowarn(&fw, fwname, &hdev->dev); - if (err < 0) { - if (!test_bit(BTUSB_BOOTLOADER, &data->flags)) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - return 0; - } - - bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", - fwname, err); - - return err; - } - - bt_dev_info(hdev, "Found device firmware: %s", fwname); - - if (fw->size < 644) { - bt_dev_err(hdev, "Invalid size of firmware file (%zu)", - fw->size); - err = -EBADF; - goto done; - } - - calltime = ktime_get(); - - set_bit(BTUSB_DOWNLOADING, &data->flags); - - /* Start firmware downloading and get boot parameter */ - err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param, - INTEL_HW_VARIANT(ver->cnvi_bt), - ver->sbe_type); - if (err < 0) { - if (err == -EALREADY) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - err = 0; - goto done; - } - - /* When FW download fails, send Intel Reset to retry - * FW download. - */ - btintel_reset_to_bootloader(hdev); - goto done; - } - - /* Before switching the device into operational mode and with that - * booting the loaded firmware, wait for the bootloader notification - * that all fragments have been successfully received. - * - * When the event processing receives the notification, then the - * BTUSB_DOWNLOADING flag will be cleared. - * - * The firmware loading should not take longer than 5 seconds - * and thus just timeout if that happens and fail the setup - * of this device. - */ - err = btusb_download_wait(hdev, calltime, 5000); - if (err == -ETIMEDOUT) - btintel_reset_to_bootloader(hdev); - -done: - release_firmware(fw); - return err; -} - -static int btusb_intel_download_firmware(struct hci_dev *hdev, - struct intel_version *ver, - struct intel_boot_params *params, - u32 *boot_param) -{ - const struct firmware *fw; - char fwname[64]; - int err; - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t calltime; - - if (!ver || !params) - return -EINVAL; - - /* The firmware variant determines if the device is in bootloader - * mode or is running operational firmware. The value 0x06 identifies - * the bootloader and the value 0x23 identifies the operational - * firmware. - * - * When the operational firmware is already present, then only - * the check for valid Bluetooth device address is needed. This - * determines if the device will be added as configured or - * unconfigured controller. - * - * It is not possible to use the Secure Boot Parameters in this - * case since that command is only available in bootloader mode. - */ - if (ver->fw_variant == 0x23) { - clear_bit(BTUSB_BOOTLOADER, &data->flags); - btintel_check_bdaddr(hdev); - - /* SfP and WsP don't seem to update the firmware version on file - * so version checking is currently possible. - */ - switch (ver->hw_variant) { - case 0x0b: /* SfP */ - case 0x0c: /* WsP */ - return 0; - } - - /* Proceed to download to check if the version matches */ - goto download; - } - - /* Read the secure boot parameters to identify the operating - * details of the bootloader. - */ - err = btintel_read_boot_params(hdev, params); - if (err) - return err; - - /* It is required that every single firmware fragment is acknowledged - * with a command complete event. If the boot parameters indicate - * that this bootloader does not send them, then abort the setup. - */ - if (params->limited_cce != 0x00) { - bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)", - params->limited_cce); - return -EINVAL; - } - - /* If the OTP has no valid Bluetooth device address, then there will - * also be no valid address for the operational firmware. - */ - if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { - bt_dev_info(hdev, "No device address configured"); - set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); - } - -download: - /* With this Intel bootloader only the hardware variant and device - * revision information are used to select the right firmware for SfP - * and WsP. - * - * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi. - * - * Currently the supported hardware variants are: - * 11 (0x0b) for iBT3.0 (LnP/SfP) - * 12 (0x0c) for iBT3.5 (WsP) - * - * For ThP/JfP and for future SKU's, the FW name varies based on HW - * variant, HW revision and FW revision, as these are dependent on CNVi - * and RF Combination. - * - * 17 (0x11) for iBT3.5 (JfP) - * 18 (0x12) for iBT3.5 (ThP) - * - * The firmware file name for these will be - * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi. - * - */ - err = btusb_setup_intel_new_get_fw_name(ver, params, fwname, - sizeof(fwname), "sfi"); - if (err < 0) { - if (!test_bit(BTUSB_BOOTLOADER, &data->flags)) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - return 0; - } - - bt_dev_err(hdev, "Unsupported Intel firmware naming"); - return -EINVAL; - } - - err = firmware_request_nowarn(&fw, fwname, &hdev->dev); - if (err < 0) { - if (!test_bit(BTUSB_BOOTLOADER, &data->flags)) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - return 0; - } - - bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", - fwname, err); - return err; - } - - bt_dev_info(hdev, "Found device firmware: %s", fwname); - - if (fw->size < 644) { - bt_dev_err(hdev, "Invalid size of firmware file (%zu)", - fw->size); - err = -EBADF; - goto done; - } - - calltime = ktime_get(); - - set_bit(BTUSB_DOWNLOADING, &data->flags); - - /* Start firmware downloading and get boot parameter */ - err = btintel_download_firmware(hdev, ver, fw, boot_param); - if (err < 0) { - if (err == -EALREADY) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - err = 0; - goto done; - } - - /* When FW download fails, send Intel Reset to retry - * FW download. - */ - btintel_reset_to_bootloader(hdev); - goto done; - } - - /* Before switching the device into operational mode and with that - * booting the loaded firmware, wait for the bootloader notification - * that all fragments have been successfully received. - * - * When the event processing receives the notification, then the - * BTUSB_DOWNLOADING flag will be cleared. - * - * The firmware loading should not take longer than 5 seconds - * and thus just timeout if that happens and fail the setup - * of this device. - */ - err = btusb_download_wait(hdev, calltime, 5000); - if (err == -ETIMEDOUT) - btintel_reset_to_bootloader(hdev); - -done: - release_firmware(fw); - return err; -} - -static int btusb_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t delta, rettime; - unsigned long long duration; - int err; - - bt_dev_info(hdev, "Waiting for device to boot"); - - err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING, - TASK_INTERRUPTIBLE, - msecs_to_jiffies(msec)); - if (err == -EINTR) { - bt_dev_err(hdev, "Device boot interrupted"); - return -EINTR; - } - - if (err) { - bt_dev_err(hdev, "Device boot timeout"); - return -ETIMEDOUT; - } - - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - duration = (unsigned long long) ktime_to_ns(delta) >> 10; - - bt_dev_info(hdev, "Device booted in %llu usecs", duration); - - return 0; -} - -static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t calltime; - int err; - - calltime = ktime_get(); - - set_bit(BTUSB_BOOTING, &data->flags); - - err = btintel_send_intel_reset(hdev, boot_addr); - if (err) { - bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); - btintel_reset_to_bootloader(hdev); - return err; - } - - /* The bootloader will not indicate when the device is ready. This - * is done by the operational firmware sending bootup notification. - * - * Booting into operational firmware should not take longer than - * 1 second. However if that happens, then just fail the setup - * since something went wrong. - */ - err = btusb_boot_wait(hdev, calltime, 1000); - if (err == -ETIMEDOUT) - btintel_reset_to_bootloader(hdev); - - return err; -} - -static int btusb_setup_intel_new(struct hci_dev *hdev) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - struct intel_version ver; - struct intel_boot_params params; - u32 boot_param; - char ddcname[64]; - int err; - struct intel_debug_features features; - - BT_DBG("%s", hdev->name); - - /* Set the default boot parameter to 0x0 and it is updated to - * SKU specific boot parameter after reading Intel_Write_Boot_Params - * command while downloading the firmware. - */ - boot_param = 0x00000000; - - /* Read the Intel version information to determine if the device - * is in bootloader mode or if it already has operational firmware - * loaded. - */ - err = btintel_read_version(hdev, &ver); - if (err) { - bt_dev_err(hdev, "Intel Read version failed (%d)", err); - btintel_reset_to_bootloader(hdev); - return err; - } - - err = btintel_version_info(hdev, &ver); - if (err) - return err; - - err = btusb_intel_download_firmware(hdev, &ver, ¶ms, &boot_param); - if (err) - return err; - - /* controller is already having an operational firmware */ - if (ver.fw_variant == 0x23) - goto finish; - - err = btusb_intel_boot(hdev, boot_param); - if (err) - return err; - - clear_bit(BTUSB_BOOTLOADER, &data->flags); - - err = btusb_setup_intel_new_get_fw_name(&ver, ¶ms, ddcname, - sizeof(ddcname), "ddc"); - - if (err < 0) { - bt_dev_err(hdev, "Unsupported Intel firmware naming"); - } else { - /* Once the device is running in operational mode, it needs to - * apply the device configuration (DDC) parameters. - * - * The device can work without DDC parameters, so even if it - * fails to load the file, no need to fail the setup. - */ - btintel_load_ddc_config(hdev, ddcname); - } - - /* Read the Intel supported features and if new exception formats - * supported, need to load the additional DDC config to enable. - */ - err = btintel_read_debug_features(hdev, &features); - if (!err) { - /* Set DDC mask for available debug features */ - btintel_set_debug_features(hdev, &features); - } - - /* Read the Intel version information after loading the FW */ - err = btintel_read_version(hdev, &ver); - if (err) - return err; - - btintel_version_info(hdev, &ver); - -finish: - /* All Intel controllers that support the Microsoft vendor - * extension are using 0xFC1E for VsMsftOpCode. - */ - switch (ver.hw_variant) { - case 0x11: /* JfP */ - case 0x12: /* ThP */ - case 0x13: /* HrP */ - case 0x14: /* CcP */ - hci_set_msft_opcode(hdev, 0xFC1E); - break; - } - - /* Set the event mask for Intel specific vendor events. This enables - * a few extra events that are useful during general operation. It - * does not enable any debugging related events. - * - * The device will function correctly without these events enabled - * and thus no need to fail the setup. - */ - btintel_set_event_mask(hdev, false); - - return 0; -} - -static int btusb_setup_intel_newgen(struct hci_dev *hdev) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - u32 boot_param; - char ddcname[64]; - int err; - struct intel_debug_features features; - struct intel_version_tlv version; - - bt_dev_dbg(hdev, ""); - - /* Set the default boot parameter to 0x0 and it is updated to - * SKU specific boot parameter after reading Intel_Write_Boot_Params - * command while downloading the firmware. - */ - boot_param = 0x00000000; - - /* Read the Intel version information to determine if the device - * is in bootloader mode or if it already has operational firmware - * loaded. - */ - err = btintel_read_version_tlv(hdev, &version); - if (err) { - bt_dev_err(hdev, "Intel Read version failed (%d)", err); - btintel_reset_to_bootloader(hdev); - return err; - } - - err = btintel_version_info_tlv(hdev, &version); - if (err) - return err; - - err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param); - if (err) - return err; - - /* check if controller is already having an operational firmware */ - if (version.img_type == 0x03) - goto finish; - - err = btusb_intel_boot(hdev, boot_param); - if (err) - return err; - - clear_bit(BTUSB_BOOTLOADER, &data->flags); - - btusb_setup_intel_newgen_get_fw_name(&version, ddcname, sizeof(ddcname), - "ddc"); - /* Once the device is running in operational mode, it needs to - * apply the device configuration (DDC) parameters. - * - * The device can work without DDC parameters, so even if it - * fails to load the file, no need to fail the setup. - */ - btintel_load_ddc_config(hdev, ddcname); - - /* Read the Intel supported features and if new exception formats - * supported, need to load the additional DDC config to enable. - */ - err = btintel_read_debug_features(hdev, &features); - if (!err) { - /* Set DDC mask for available debug features */ - btintel_set_debug_features(hdev, &features); - } - - /* Read the Intel version information after loading the FW */ - err = btintel_read_version_tlv(hdev, &version); - if (err) - return err; - - btintel_version_info_tlv(hdev, &version); - -finish: - /* All Intel new genration controllers support the Microsoft vendor - * extension are using 0xFC1E for VsMsftOpCode. - */ - switch (INTEL_HW_VARIANT(version.cnvi_bt)) { - case 0x17: - case 0x18: - case 0x19: - hci_set_msft_opcode(hdev, 0xFC1E); - break; - } - - /* Set the event mask for Intel specific vendor events. This enables - * a few extra events that are useful during general operation. It - * does not enable any debugging related events. - * - * The device will function correctly without these events enabled - * and thus no need to fail the setup. - */ - btintel_set_event_mask(hdev, false); - - return 0; -} - -static int btusb_shutdown_intel_new(struct hci_dev *hdev) -{ - struct sk_buff *skb; - - /* Send HCI Reset to the controller to stop any BT activity which - * were triggered. This will help to save power and maintain the - * sync b/w Host and controller - */ - skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - bt_dev_err(hdev, "HCI reset during shutdown failed"); - return PTR_ERR(skb); - } - kfree_skb(skb); - - return 0; -} - /* UHW CR mapping */ #define MTK_BT_MISC 0x70002510 #define MTK_BT_SUBSYS_RST 0x70002610 @@ -4389,18 +3723,16 @@ static int btusb_probe(struct usb_interface *intf, priv_size = 0; + data->recv_event = hci_recv_frame; + data->recv_bulk = btusb_recv_bulk; + if (id->driver_info & BTUSB_INTEL_COMBINED) { /* Allocate extra space for Intel device */ priv_size += sizeof(struct btintel_data); - } - if (id->driver_info & BTUSB_INTEL_NEW) { + /* Override the rx handlers */ data->recv_event = btusb_recv_event_intel; data->recv_bulk = btusb_recv_bulk_intel; - set_bit(BTUSB_BOOTLOADER, &data->flags); - } else { - data->recv_event = hci_recv_frame; - data->recv_bulk = btusb_recv_bulk; } data->recv_acl = hci_recv_frame; @@ -4486,6 +3818,7 @@ static int btusb_probe(struct usb_interface *intf, goto out_free_dev; /* Transport specific configuration */ + hdev->send = btusb_send_frame_intel; hdev->cmd_timeout = btusb_intel_cmd_timeout; set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); @@ -4496,38 +3829,6 @@ static int btusb_probe(struct usb_interface *intf, btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD); } - if (id->driver_info & BTUSB_INTEL_NEW) { - hdev->manufacturer = 2; - hdev->send = btusb_send_frame_intel; - hdev->setup = btusb_setup_intel_new; - hdev->shutdown = btusb_shutdown_intel_new; - hdev->hw_error = btintel_hw_error; - hdev->set_diag = btintel_set_diag; - hdev->set_bdaddr = btintel_set_bdaddr; - hdev->cmd_timeout = btusb_intel_cmd_timeout; - set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); - set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); - } - - if (id->driver_info & BTUSB_INTEL_NEWGEN) { - hdev->manufacturer = 2; - hdev->send = btusb_send_frame_intel; - hdev->setup = btusb_setup_intel_newgen; - hdev->shutdown = btusb_shutdown_intel_new; - hdev->hw_error = btintel_hw_error; - hdev->set_diag = btintel_set_diag; - hdev->set_bdaddr = btintel_set_bdaddr; - hdev->cmd_timeout = btusb_intel_cmd_timeout; - set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); - set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); - - data->recv_event = btusb_recv_event_intel; - data->recv_bulk = btusb_recv_bulk_intel; - set_bit(BTUSB_BOOTLOADER, &data->flags); - } - if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; |