summaryrefslogtreecommitdiff
path: root/drivers/bluetooth
diff options
context:
space:
mode:
authorSarah Sharp <sarah.a.sharp@linux.intel.com>2012-04-23 21:08:51 +0400
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2012-05-19 02:42:55 +0400
commite1f12eb6ba6f1e74007eb01ed26fad7c5239d62b (patch)
tree4c6753fc5091cd31b8cc0029e41f86f4f8c3b195 /drivers/bluetooth
parente3567d2c15a7a8e2f992a5f7c7683453ca406d82 (diff)
downloadlinux-e1f12eb6ba6f1e74007eb01ed26fad7c5239d62b.tar.xz
USB: Disable hub-initiated LPM for comms devices.
Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Diffstat (limited to 'drivers/bluetooth')
-rw-r--r--drivers/bluetooth/ath3k.c1
-rw-r--r--drivers/bluetooth/bcm203x.c1
-rw-r--r--drivers/bluetooth/bfusb.c1
-rw-r--r--drivers/bluetooth/bpa10x.c1
-rw-r--r--drivers/bluetooth/btusb.c1
5 files changed, 5 insertions, 0 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 57fd867553d7..2812b152d6e9 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -439,6 +439,7 @@ static struct usb_driver ath3k_driver = {
.probe = ath3k_probe,
.disconnect = ath3k_disconnect,
.id_table = ath3k_table,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(ath3k_driver);
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 1e742a50e2cd..37ae175162f3 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -279,6 +279,7 @@ static struct usb_driver bcm203x_driver = {
.probe = bcm203x_probe,
.disconnect = bcm203x_disconnect,
.id_table = bcm203x_table,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(bcm203x_driver);
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index b8ac1c549a1c..32e825144fe9 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -749,6 +749,7 @@ static struct usb_driver bfusb_driver = {
.probe = bfusb_probe,
.disconnect = bfusb_disconnect,
.id_table = bfusb_table,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(bfusb_driver);
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index d894340a7601..609861a53c28 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -508,6 +508,7 @@ static struct usb_driver bpa10x_driver = {
.probe = bpa10x_probe,
.disconnect = bpa10x_disconnect,
.id_table = bpa10x_table,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(bpa10x_driver);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 9217121362e1..461c68bc4dd7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1218,6 +1218,7 @@ static struct usb_driver btusb_driver = {
#endif
.id_table = btusb_table,
.supports_autosuspend = 1,
+ .disable_hub_initiated_lpm = 1,
};
module_usb_driver(btusb_driver);