summaryrefslogtreecommitdiff
path: root/drivers/bus
diff options
context:
space:
mode:
authorThomas Petazzoni <thomas.petazzoni@free-electrons.com>2015-05-28 11:40:13 +0300
committerGregory CLEMENT <gregory.clement@free-electrons.com>2015-05-28 12:14:31 +0300
commit885dbd154b2f2ee305cec6fd0a162e1a77ae2b06 (patch)
treee83f10d53bf5ff3bb959d96d629fe5252aca7577 /drivers/bus
parent8c9e06e64768665503e778088a39ecff3a6f2e0c (diff)
downloadlinux-885dbd154b2f2ee305cec6fd0a162e1a77ae2b06.tar.xz
Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"
This reverts commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"), because it breaks DMA on platforms having more than 2 GB of RAM. This commit changed the information reported to DMA masters device drivers through the mv_mbus_dram_info() function so that the returned DRAM ranges do not overlap with I/O windows. This was necessary as a preparation to support the new CESA Crypto Engine driver, which will use DMA for cryptographic operations. But since it does DMA with the SRAM which is mapped as an I/O window, having DRAM ranges overlapping with I/O windows was problematic. To solve this, the above mentioned commit changed the mvebu-mbus to adjust the DRAM ranges so that they don't overlap with the I/O windows. However, by doing this, we re-adjust the DRAM ranges in a way that makes them have a size that is no longer a power of two. While this is perfectly fine for the Crypto Engine, which supports DRAM ranges with a granularity of 64 KB, it breaks basically all other DMA masters, which expect power of two sizes for the DRAM ranges. Due to this, if the installed system memory is 4 GB, in two chip-selects of 2 GB, the second DRAM range will be reduced from 2 GB to a little bit less than 2 GB to not overlap with the I/O windows, in a way that results in a DRAM range that doesn't have a power of two size. This means that whenever you do a DMA transfer with an address located in the [ 2 GB ; 4 GB ] area, it will freeze the system. Any serious DMA activity like simply running: for i in $(seq 1 64) ; do dd if=/dev/urandom of=file$i bs=1M count=16 ; done in an ext3 partition mounted over a SATA drive will freeze the system. Since the new CESA crypto driver that uses DMA has not been merged yet, the easiest fix is to simply revert this commit. A follow-up commit will introduce a different solution for the CESA crypto driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window") Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/mvebu-mbus.c105
1 files changed, 16 insertions, 89 deletions
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 7fa4510dfbe4..6f047dcb94c2 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -58,7 +58,6 @@
#include <linux/debugfs.h>
#include <linux/log2.h>
#include <linux/syscore_ops.h>
-#include <linux/memblock.h>
/*
* DDR target is the same on all platforms.
@@ -103,9 +102,7 @@
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
-#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
#define MBUS_BRIDGE_BASE_OFF 0x4
-#define MBUS_BRIDGE_BASE_MASK 0xffff0000
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
@@ -579,106 +576,36 @@ static unsigned int armada_xp_mbus_win_remap_offset(int win)
return MVEBU_MBUS_NO_REMAP;
}
-/*
- * Use the memblock information to find the MBus bridge hole in the
- * physical address space.
- */
-static void __init
-mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
-{
- struct memblock_region *r;
- uint64_t s = 0;
-
- for_each_memblock(memory, r) {
- /*
- * This part of the memory is above 4 GB, so we don't
- * care for the MBus bridge hole.
- */
- if (r->base >= 0x100000000)
- continue;
-
- /*
- * The MBus bridge hole is at the end of the RAM under
- * the 4 GB limit.
- */
- if (r->base + r->size > s)
- s = r->base + r->size;
- }
-
- *start = s;
- *end = 0x100000000;
-}
-
static void __init
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
int i;
int cs;
- uint64_t mbus_bridge_base, mbus_bridge_end;
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
- mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
-
for (i = 0, cs = 0; i < 4; i++) {
- u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
- u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
- u64 end;
- struct mbus_dram_window *w;
-
- /* Ignore entries that are not enabled */
- if (!(size & DDR_SIZE_ENABLED))
- continue;
-
- /*
- * Ignore entries whose base address is above 2^32,
- * since devices cannot DMA to such high addresses
- */
- if (base & DDR_BASE_CS_HIGH_MASK)
- continue;
-
- base = base & DDR_BASE_CS_LOW_MASK;
- size = (size | ~DDR_SIZE_MASK) + 1;
- end = base + size;
-
- /*
- * Adjust base/size of the current CS to make sure it
- * doesn't overlap with the MBus bridge hole. This is
- * particularly important for devices that do DMA from
- * DRAM to a SRAM mapped in a MBus window, such as the
- * CESA cryptographic engine.
- */
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
/*
- * The CS is fully enclosed inside the MBus bridge
- * area, so ignore it.
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (base >= mbus_bridge_base && end <= mbus_bridge_end)
- continue;
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
- /*
- * Beginning of CS overlaps with end of MBus, raise CS
- * base address, and shrink its size.
- */
- if (base >= mbus_bridge_base && end > mbus_bridge_end) {
- size -= mbus_bridge_end - base;
- base = mbus_bridge_end;
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
}
-
- /*
- * End of CS overlaps with beginning of MBus, shrink
- * CS size.
- */
- if (base < mbus_bridge_base && end > mbus_bridge_base)
- size -= end - mbus_bridge_base;
-
- w = &mvebu_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (mbus->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base;
- w->size = size;
}
mvebu_mbus_dram_info.num_cs = cs;
}