summaryrefslogtreecommitdiff
path: root/drivers/char/tpm/Makefile
diff options
context:
space:
mode:
authorAndrey Pronin <apronin@chromium.org>2019-09-20 21:32:38 +0300
committerJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>2019-11-12 22:45:37 +0300
commit797c0113c9a481d4554988d70b5b52fae657262f (patch)
treef0da4cbcaee4d161832a91216a6be4568f095e92 /drivers/char/tpm/Makefile
parent8ab5e82afa969b65b286d8949c12d2a64c83960c (diff)
downloadlinux-797c0113c9a481d4554988d70b5b52fae657262f.tar.xz
tpm: tpm_tis_spi: Support cr50 devices
Add TPM2.0 PTP FIFO compatible SPI interface for chips with Cr50 firmware. The firmware running on the currently supported H1 Secure Microcontroller requires a special driver to handle its specifics: - need to ensure a certain delay between SPI transactions, or else the chip may miss some part of the next transaction - if there is no SPI activity for some time, it may go to sleep, and needs to be waken up before sending further commands - access to vendor-specific registers Cr50 firmware has a requirement to wait for the TPM to wakeup before sending commands over the SPI bus. Otherwise, the firmware could be in deep sleep and not respond. The method to wait for the device to wakeup is slightly different than the usual flow control mechanism described in the TCG SPI spec. Add a completion to tpm_tis_spi_transfer() before we start a SPI transfer so we can keep track of the last time the TPM driver accessed the SPI bus to support the flow control mechanism. Split the cr50 logic off into a different file to keep it out of the normal code flow of the existing SPI driver while making it all part of the same module when the code is optionally compiled into the same module. Export a new function, tpm_tis_spi_init(), and the associated read/write/transfer APIs so that we can do this. Make the cr50 code wrap the tpm_tis_spi_phy struct with its own struct to override the behavior of tpm_tis_spi_transfer() by supplying a custom flow control hook. This shares the most code between the core driver and the cr50 support without combining everything into the core driver or exporting module symbols. Signed-off-by: Andrey Pronin <apronin@chromium.org> Cc: Andrey Pronin <apronin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Alexander Steffen <Alexander.Steffen@infineon.com> Cc: Heiko Stuebner <heiko@sntech.de> [swboyd@chromium.org: Replace boilerplate with SPDX tag, drop suspended bit and remove ifdef checks in cr50.h, migrate to functions exported in tpm_tis_spi.h, combine into one module instead of two] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Diffstat (limited to 'drivers/char/tpm/Makefile')
-rw-r--r--drivers/char/tpm/Makefile4
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index c354cdff9c62..5a0d99d4fec0 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -21,7 +21,9 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o
tpm-$(CONFIG_OF) += eventlog/of.o
obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
obj-$(CONFIG_TCG_TIS) += tpm_tis.o
-obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o
+obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi_mod.o
+tpm_tis_spi_mod-y := tpm_tis_spi.o
+tpm_tis_spi_mod-$(CONFIG_TCG_TIS_SPI_CR50) += tpm_tis_spi_cr50.o
obj-$(CONFIG_TCG_TIS_I2C_ATMEL) += tpm_i2c_atmel.o
obj-$(CONFIG_TCG_TIS_I2C_INFINEON) += tpm_i2c_infineon.o
obj-$(CONFIG_TCG_TIS_I2C_NUVOTON) += tpm_i2c_nuvoton.o