Merge tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These are mostly ARM cpufreq driver updates, including one new
  MediaTek driver that has just passed all of the reviews, with the
  addition of a revert of a recent intel_pstate commit, some core
  cpufreq changes and a DT-related update of the operating performance
  points (OPP) support code.

  Specifics:

   - Add new cpufreq driver for the MediaTek MT6779 platform called
     mediatek-hw along with corresponding DT bindings (Hector.Yuan).

   - Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
     Gopinath).

   - Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
     policy flag (Taniya Das).

   - Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
     Andersson).

   - Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
     flag (Viresh Kumar).

   - Add new cpufreq driver callback to allow drivers to register with
     the Energy Model in a consistent way and make several drivers use
     it (Viresh Kumar).

   - Change the remaining users of the .ready() cpufreq driver callback
     to move the code from it elsewhere and drop it from the cpufreq
     core (Viresh Kumar).

   - Revert recent intel_pstate change adding HWP guaranteed performance
     change notification support to it that led to problems, because the
     notification in question is triggered prematurely on some systems
     (Rafael Wysocki).

   - Convert the OPP DT bindings to DT schema and clean them up while at
     it (Rob Herring)"

* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
  cpufreq: mediatek-hw: Add support for CPUFREQ HW
  cpufreq: Add of_perf_domain_get_sharing_cpumask
  dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
  cpufreq: Remove ready() callback
  cpufreq: sh: Remove sh_cpufreq_cpu_ready()
  cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
  cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
  cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
  cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
  cpufreq: scmi: Use .register_em() to register with energy model
  cpufreq: vexpress: Use .register_em() to register with energy model
  cpufreq: scpi: Use .register_em() to register with energy model
  dt-bindings: opp: Convert to DT schema
  dt-bindings: Clean-up OPP binding node names in examples
  ARM: dts: omap: Drop references to opp.txt
  cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
  cpufreq: omap: Use .register_em() to register with energy model
  cpufreq: mediatek: Use .register_em() to register with energy model
  cpufreq: imx6q: Use .register_em() to register with energy model
  ...

1 files changed, 149 insertions, 2 deletions

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index f86859bf76f1..a2be0df7e174 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -7,12 +7,14 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 #include <linux/interconnect.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 #define LUT_MAX_ENTRIES			40U
 #define LUT_SRC				GENMASK(31, 30)
@@ -22,10 +24,13 @@
 #define CLK_HW_DIV			2
 #define LUT_TURBO_IND			1
 
+#define HZ_PER_KHZ			1000
+
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
 	u32 reg_freq_lut;
 	u32 reg_volt_lut;
+	u32 reg_current_vote;
 	u32 reg_perf_state;
 	u8 lut_row_size;
 };
@@ -34,6 +39,16 @@ struct qcom_cpufreq_data {
 	void __iomem *base;
 	struct resource *res;
 	const struct qcom_cpufreq_soc_data *soc_data;
+
+	/*
+	 * Mutex to synchronize between de-init sequence and re-starting LMh
+	 * polling/interrupts
+	 */
+	struct mutex throttle_lock;
+	int throttle_irq;
+	bool cancel_throttle;
+	struct delayed_work throttle_work;
+	struct cpufreq_policy *policy;
 };
 
 static unsigned long cpu_hw_rate, xo_rate;
@@ -251,10 +266,92 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
 	}
 }
 
+static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
+{
+	unsigned int val = readl_relaxed(data->base + data->soc_data->reg_current_vote);
+
+	return (val & 0x3FF) * 19200;
+}
+
+static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+{
+	unsigned long max_capacity, capacity, freq_hz, throttled_freq;
+	struct cpufreq_policy *policy = data->policy;
+	int cpu = cpumask_first(policy->cpus);
+	struct device *dev = get_cpu_device(cpu);
+	struct dev_pm_opp *opp;
+	unsigned int freq;
+
+	/*
+	 * Get the h/w throttled frequency, normalize it using the
+	 * registered opp table and use it to calculate thermal pressure.
+	 */
+	freq = qcom_lmh_get_throttle_freq(data);
+	freq_hz = freq * HZ_PER_KHZ;
+
+	opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
+	if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+		dev_pm_opp_find_freq_ceil(dev, &freq_hz);
+
+	throttled_freq = freq_hz / HZ_PER_KHZ;
+
+	/* Update thermal pressure */
+
+	max_capacity = arch_scale_cpu_capacity(cpu);
+	capacity = mult_frac(max_capacity, throttled_freq, policy->cpuinfo.max_freq);
+
+	/* Don't pass boost capacity to scheduler */
+	if (capacity > max_capacity)
+		capacity = max_capacity;
+
+	arch_set_thermal_pressure(policy->cpus, max_capacity - capacity);
+
+	/*
+	 * In the unlikely case policy is unregistered do not enable
+	 * polling or h/w interrupt
+	 */
+	mutex_lock(&data->throttle_lock);
+	if (data->cancel_throttle)
+		goto out;
+
+	/*
+	 * If h/w throttled frequency is higher than what cpufreq has requested
+	 * for, then stop polling and switch back to interrupt mechanism.
+	 */
+	if (throttled_freq >= qcom_cpufreq_hw_get(cpu))
+		enable_irq(data->throttle_irq);
+	else
+		mod_delayed_work(system_highpri_wq, &data->throttle_work,
+				 msecs_to_jiffies(10));
+
+out:
+	mutex_unlock(&data->throttle_lock);
+}
+
+static void qcom_lmh_dcvs_poll(struct work_struct *work)
+{
+	struct qcom_cpufreq_data *data;
+
+	data = container_of(work, struct qcom_cpufreq_data, throttle_work.work);
+	qcom_lmh_dcvs_notify(data);
+}
+
+static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
+{
+	struct qcom_cpufreq_data *c_data = data;
+
+	/* Disable interrupt and enable polling */
+	disable_irq_nosync(c_data->throttle_irq);
+	qcom_lmh_dcvs_notify(c_data);
+
+	return 0;
+}
+
 static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 	.reg_enable = 0x0,
 	.reg_freq_lut = 0x110,
 	.reg_volt_lut = 0x114,
+	.reg_current_vote = 0x704,
 	.reg_perf_state = 0x920,
 	.lut_row_size = 32,
 };
@@ -274,6 +371,51 @@ static const struct of_device_id qcom_cpufreq_hw_match[] = {
 };
 MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
 
+static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
+{
+	struct qcom_cpufreq_data *data = policy->driver_data;
+	struct platform_device *pdev = cpufreq_get_driver_data();
+	char irq_name[15];
+	int ret;
+
+	/*
+	 * Look for LMh interrupt. If no interrupt line is specified /
+	 * if there is an error, allow cpufreq to be enabled as usual.
+	 */
+	data->throttle_irq = platform_get_irq(pdev, index);
+	if (data->throttle_irq <= 0)
+		return data->throttle_irq == -EPROBE_DEFER ? -EPROBE_DEFER : 0;
+
+	data->cancel_throttle = false;
+	data->policy = policy;
+
+	mutex_init(&data->throttle_lock);
+	INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll);
+
+	snprintf(irq_name, sizeof(irq_name), "dcvsh-irq-%u", policy->cpu);
+	ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq,
+				   IRQF_ONESHOT, irq_name, data);
+	if (ret) {
+		dev_err(&pdev->dev, "Error registering %s: %d\n", irq_name, ret);
+		return 0;
+	}
+
+	return 0;
+}
+
+static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data)
+{
+	if (data->throttle_irq <= 0)
+		return;
+
+	mutex_lock(&data->throttle_lock);
+	data->cancel_throttle = true;
+	mutex_unlock(&data->throttle_lock);
+
+	cancel_delayed_work_sync(&data->throttle_work);
+	free_irq(data->throttle_irq, data);
+}
+
 static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 {
 	struct platform_device *pdev = cpufreq_get_driver_data();
@@ -348,6 +490,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	policy->driver_data = data;
+	policy->dvfs_possible_from_any_cpu = true;
 
 	ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
 	if (ret) {
@@ -362,14 +505,16 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 		goto error;
 	}
 
-	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-
 	if (policy_has_boost_freq(policy)) {
 		ret = cpufreq_enable_boost_support();
 		if (ret)
 			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
 	}
 
+	ret = qcom_cpufreq_hw_lmh_init(policy, index);
+	if (ret)
+		goto error;
+
 	return 0;
 error:
 	kfree(data);
@@ -389,6 +534,7 @@ static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
 
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	qcom_cpufreq_hw_lmh_exit(data);
 	kfree(policy->freq_table);
 	kfree(data);
 	iounmap(base);
@@ -412,6 +558,7 @@ static struct cpufreq_driver cpufreq_qcom_hw_driver = {
 	.get		= qcom_cpufreq_hw_get,
 	.init		= qcom_cpufreq_hw_cpu_init,
 	.exit		= qcom_cpufreq_hw_cpu_exit,
+	.register_em	= cpufreq_register_em_with_opp,
 	.fast_switch    = qcom_cpufreq_hw_fast_switch,
 	.name		= "qcom-cpufreq-hw",
 	.attr		= qcom_cpufreq_hw_attr,