diff options
author | Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> | 2023-03-14 11:04:41 +0300 |
---|---|---|
committer | Bjorn Andersson <andersson@kernel.org> | 2023-03-16 01:17:08 +0300 |
commit | ee13b5008707948d3052c1b5aab485c6cd53658e (patch) | |
tree | 17a09a04ee97b3086011d79324e66204983a3d7e /drivers/edac/qcom_edac.c | |
parent | 43aa006e074c4dcaf7493895fb2bd4af16d7c0ab (diff) | |
download | linux-ee13b5008707948d3052c1b5aab485c6cd53658e.tar.xz |
qcom: llcc/edac: Fix the base address used for accessing LLCC banks
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
accessing the (Control and Status Registers) CSRs of each LLCC bank.
This stride only works for some SoCs like SDM845 for which driver
support was initially added.
But the later SoCs use different register stride that vary between the
banks with holes in-between. So it is not possible to use a single register
stride for accessing the CSRs of each bank. By doing so could result in a
crash.
For fixing this issue, let's obtain the base address of each LLCC bank from
devicetree and get rid of the fixed stride. This also means, there is no
need to rely on reg-names property and the base addresses can be obtained
using the index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC
supports more than one bank, then those need to be defined in devicetree
for index from 1..N-1.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org
Diffstat (limited to 'drivers/edac/qcom_edac.c')
-rw-r--r-- | drivers/edac/qcom_edac.c | 14 |
1 files changed, 5 insertions, 9 deletions
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 3256254c3722..1d3cc1930a74 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4); - ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg, + ret = regmap_read(drv->regmaps[bank], synd_reg, &synd_val); if (ret) goto clear; @@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); } - ret = regmap_read(drv->regmap, - drv->offsets[bank] + reg_data.count_status_reg, + ret = regmap_read(drv->regmaps[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear; @@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt); - ret = regmap_read(drv->regmap, - drv->offsets[bank] + reg_data.ways_status_reg, + ret = regmap_read(drv->regmaps[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear; @@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) /* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) { - ret = regmap_read(drv->regmap, - drv->offsets[i] + DRP_INTERRUPT_STATUS, + ret = regmap_read(drv->regmaps[i], DRP_INTERRUPT_STATUS, &drp_error); if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED; - ret = regmap_read(drv->regmap, - drv->offsets[i] + TRP_INTERRUPT_0_STATUS, + ret = regmap_read(drv->regmaps[i], TRP_INTERRUPT_0_STATUS, &trp_error); if (!ret && (trp_error & SB_ECC_ERROR)) { |