Merge tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of minor patches for Arm DTS files and soc specific
  drivers:

   - More reference counting bug fixes for DT nodes, and other trivial
     code fixes

   - Multiple code fixes for the Arm SCMI firmware driver to improve
     compatibility with firmware implementations.

   - A patch series for at91 to address power management issues from
     using the wrong DT compatible properties.

   - A series of patches to fix pad settings for NXP imx8mp to leave the
     configuration untouched from the boot loader

   - Additional DT fixes for qualcomm and NXP platforms

   - A boot time fix for stm32mp15 DT

   - Konrad Dybcio becomes an additional reviewer for the Qualcomm
     platforms"

* tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  soc: qcom: smem: use correct format characters
  ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
  ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
  ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
  ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
  ARM: dts: stm32: fix pwr regulators references to use scmi
  soc: ixp4xx/npe: Fix unused match warning
  ARM: at91: pm: Mark at91_pm_secure_init as __init
  ARM: at91: fix soc detection for SAM9X60 SiPs
  ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
  ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
  ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
  ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
  ARM: at91: pm: use proper compatible for sama5d2's rtc
  arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
  firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
  firmware: arm_scmi: Fix response size warning for OPTEE transport
  arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
  ...

5 files changed, 38 insertions, 5 deletions

diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index f6fe723ab869..d4e23101448a 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -181,7 +181,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol,
 		return NULL;
 	}
 
-	id = ida_simple_get(&scmi_bus_id, 1, 0, GFP_KERNEL);
+	id = ida_alloc_min(&scmi_bus_id, 1, GFP_KERNEL);
 	if (id < 0) {
 		kfree_const(scmi_dev->name);
 		kfree(scmi_dev);
@@ -204,7 +204,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol,
 put_dev:
 	kfree_const(scmi_dev->name);
 	put_device(&scmi_dev->dev);
-	ida_simple_remove(&scmi_bus_id, id);
+	ida_free(&scmi_bus_id, id);
 	return NULL;
 }
 
@@ -212,7 +212,7 @@ void scmi_device_destroy(struct scmi_device *scmi_dev)
 {
 	kfree_const(scmi_dev->name);
 	scmi_handle_put(scmi_dev->handle);
-	ida_simple_remove(&scmi_bus_id, scmi_dev->id);
+	ida_free(&scmi_bus_id, scmi_dev->id);
 	device_unregister(&scmi_dev->dev);
 }
 
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index c7a83f6e38e5..3ed7ae0d6781 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -194,6 +194,7 @@ static int rate_cmp_func(const void *_r1, const void *_r2)
 }
 
 struct scmi_clk_ipriv {
+	struct device *dev;
 	u32 clk_id;
 	struct scmi_clock_info *clk;
 };
@@ -223,6 +224,29 @@ iter_clk_describe_update_state(struct scmi_iterator_state *st,
 	st->num_returned = NUM_RETURNED(flags);
 	p->clk->rate_discrete = RATE_DISCRETE(flags);
 
+	/* Warn about out of spec replies ... */
+	if (!p->clk->rate_discrete &&
+	    (st->num_returned != 3 || st->num_remaining != 0)) {
+		dev_warn(p->dev,
+			 "Out-of-spec CLOCK_DESCRIBE_RATES reply for %s - returned:%d remaining:%d rx_len:%zd\n",
+			 p->clk->name, st->num_returned, st->num_remaining,
+			 st->rx_len);
+
+		/*
+		 * A known quirk: a triplet is returned but num_returned != 3
+		 * Check for a safe payload size and fix.
+		 */
+		if (st->num_returned != 3 && st->num_remaining == 0 &&
+		    st->rx_len == sizeof(*r) + sizeof(__le32) * 2 * 3) {
+			st->num_returned = 3;
+			st->num_remaining = 0;
+		} else {
+			dev_err(p->dev,
+				"Cannot fix out-of-spec reply !\n");
+			return -EPROTO;
+		}
+	}
+
 	return 0;
 }
 
@@ -255,7 +279,6 @@ iter_clk_describe_process_response(const struct scmi_protocol_handle *ph,
 
 		*rate = RATE_TO_U64(r->rate[st->loop_idx]);
 		p->clk->list.num_rates++;
-		//XXX dev_dbg(ph->dev, "Rate %llu Hz\n", *rate);
 	}
 
 	return ret;
@@ -275,6 +298,7 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,
 	struct scmi_clk_ipriv cpriv = {
 		.clk_id = clk_id,
 		.clk = clk,
+		.dev = ph->dev,
 	};
 
 	iter = ph->hops->iter_response_init(ph, &ops, SCMI_MAX_NUM_RATES,
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index c1922bd650ae..8b7ac6663d57 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -1223,6 +1223,7 @@ static int scmi_iterator_run(void *iter)
 		if (ret)
 			break;
 
+		st->rx_len = i->t->rx.len;
 		ret = iops->update_state(st, i->resp, i->priv);
 		if (ret)
 			break;
diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
index b503c22cfd32..8abace56b958 100644
--- a/drivers/firmware/arm_scmi/optee.c
+++ b/drivers/firmware/arm_scmi/optee.c
@@ -117,6 +117,7 @@ struct scmi_optee_channel {
 	u32 channel_id;
 	u32 tee_session;
 	u32 caps;
+	u32 rx_len;
 	struct mutex mu;
 	struct scmi_chan_info *cinfo;
 	union {
@@ -302,6 +303,9 @@ static int invoke_process_msg_channel(struct scmi_optee_channel *channel, size_t
 		return -EIO;
 	}
 
+	/* Save response size */
+	channel->rx_len = param[2].u.memref.size;
+
 	return 0;
 }
 
@@ -353,6 +357,7 @@ static int setup_dynamic_shmem(struct device *dev, struct scmi_optee_channel *ch
 	shbuf = tee_shm_get_va(channel->tee_shm, 0);
 	memset(shbuf, 0, msg_size);
 	channel->req.msg = shbuf;
+	channel->rx_len = msg_size;
 
 	return 0;
 }
@@ -508,7 +513,7 @@ static void scmi_optee_fetch_response(struct scmi_chan_info *cinfo,
 	struct scmi_optee_channel *channel = cinfo->transport_info;
 
 	if (channel->tee_shm)
-		msg_fetch_response(channel->req.msg, SCMI_OPTEE_MAX_MSG_SIZE, xfer);
+		msg_fetch_response(channel->req.msg, channel->rx_len, xfer);
 	else
 		shmem_fetch_response(channel->req.shmem, xfer);
 }
diff --git a/drivers/firmware/arm_scmi/protocols.h b/drivers/firmware/arm_scmi/protocols.h
index c679f3fb8718..51c31379f9b3 100644
--- a/drivers/firmware/arm_scmi/protocols.h
+++ b/drivers/firmware/arm_scmi/protocols.h
@@ -179,6 +179,8 @@ struct scmi_protocol_handle {
  * @max_resources: Maximum acceptable number of items, configured by the caller
  *		   depending on the underlying resources that it is querying.
  * @loop_idx: The iterator loop index in the current multi-part reply.
+ * @rx_len: Size in bytes of the currenly processed message; it can be used by
+ *	    the user of the iterator to verify a reply size.
  * @priv: Optional pointer to some additional state-related private data setup
  *	  by the caller during the iterations.
  */
@@ -188,6 +190,7 @@ struct scmi_iterator_state {
 	unsigned int num_remaining;
 	unsigned int max_resources;
 	unsigned int loop_idx;
+	size_t rx_len;
 	void *priv;
 };