drm/i915/mtl: Add Support for C10 PHY message bus and pll programming

XELPDP has C10 and C20 phys from Synopsys to drive displays. Each phy
has a dedicated PIPE 5.2 Message bus for configuration. This message
bus is used to configure the phy internal registers.

XELPDP has C10 phys to drive output to the EDP and the native output
from the display engine. Add structures, programming hardware state
readout logic. Port clock calculations are similar to DG2. Use the DG2
formulae to calculate the port clock but use the relevant pll signals.
Note: PHY lane 0 is always used for PLL programming.

Add sequences for C10 phy enable/disable phy lane reset,
powerdown change sequence and phy lane programming.

Bspec: 64539, 64568, 64599, 65100, 65101, 65450, 65451, 67610, 67636

v2: Squash patches related to C10 phy message bus and pll
    programming support (Jani)
    Move register definitions to a new file i.e. intel_cx0_reg_defs.h (Jani)
    Move macro definitions (Jani)
    DP rates as separate patch (Jani)
    Spin out xelpdp register definitions into a separate file (Jani)
    Replace macro to select registers based on phy lane with
    function calls (Jani)
    Fix styling issues (Jani)
    Call XELPDP_PORT_P2M_MSGBUS_STATUS() with port instead of phy (Lucas)
v3: Move clear request flag into try-loop
v4: On PHY idle change drm_err_once() as drm_dbg_kms() (Jani)
    use __intel_de_wait_for_register() instead of __intel_wait_for_register
    and uncomment intel_uncore.h (Jani)
    Add DP-alt support for PHY lane programming (Khaled)
v4: Add tx and cmn on c10mpllb_state (Imre)
    Add missing waits for pending transactions between two message bus
    writes (Imre)
    General cleanups and simplifications (Imre)
v5: Few nit cleanups from rev4 (imre)
    s/dev_priv/i915/ , s/c10mpllb/c10pll/ (RK)
    Rebase
v6: Move the mtl code from intel_c10pll_calc_port_clock to mtl function
    Fix typo in comment for REG_FIELD_PREP8 definition(Imre)

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v4)
Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-4-radhakrishna.sripada@intel.com

1 files changed, 57 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_reg_defs.h b/drivers/gpu/drm/i915/i915_reg_defs.h
index db26de6b57bc..622d603080f9 100644
--- a/drivers/gpu/drm/i915/i915_reg_defs.h
+++ b/drivers/gpu/drm/i915/i915_reg_defs.h
@@ -23,6 +23,19 @@
 				 ((__n) < 0 || (__n) > 31))))
 
 /**
+ * REG_BIT8() - Prepare a u8 bit value
+ * @__n: 0-based bit number
+ *
+ * Local wrapper for BIT() to force u8, with compile time checks.
+ *
+ * @return: Value with bit @__n set.
+ */
+#define REG_BIT8(__n)                                                   \
+	((u8)(BIT(__n) +                                                \
+	       BUILD_BUG_ON_ZERO(__is_constexpr(__n) &&         \
+				 ((__n) < 0 || (__n) > 7))))
+
+/**
  * REG_GENMASK() - Prepare a continuous u32 bitmask
  * @__high: 0-based high bit
  * @__low: 0-based low bit
@@ -52,6 +65,21 @@
 				 __is_constexpr(__low) &&		\
 				 ((__low) < 0 || (__high) > 63 || (__low) > (__high)))))
 
+/**
+ * REG_GENMASK8() - Prepare a continuous u8 bitmask
+ * @__high: 0-based high bit
+ * @__low: 0-based low bit
+ *
+ * Local wrapper for GENMASK() to force u8, with compile time checks.
+ *
+ * @return: Continuous bitmask from @__high to @__low, inclusive.
+ */
+#define REG_GENMASK8(__high, __low)                                     \
+	((u8)(GENMASK(__high, __low) +                                  \
+	       BUILD_BUG_ON_ZERO(__is_constexpr(__high) &&      \
+				 __is_constexpr(__low) &&               \
+				 ((__low) < 0 || (__high) > 7 || (__low) > (__high)))))
+
 /*
  * Local integer constant expression version of is_power_of_2().
  */
@@ -75,6 +103,23 @@
 	       BUILD_BUG_ON_ZERO(__builtin_choose_expr(__is_constexpr(__val), (~((__mask) >> __bf_shf(__mask)) & (__val)), 0))))
 
 /**
+ * REG_FIELD_PREP8() - Prepare a u8 bitfield value
+ * @__mask: shifted mask defining the field's length and position
+ * @__val: value to put in the field
+ *
+ * Local copy of FIELD_PREP() to generate an integer constant expression, force
+ * u8 and for consistency with REG_FIELD_GET8(), REG_BIT8() and REG_GENMASK8().
+ *
+ * @return: @__val masked and shifted into the field defined by @__mask.
+ */
+#define REG_FIELD_PREP8(__mask, __val)                                          \
+	((u8)((((typeof(__mask))(__val) << __bf_shf(__mask)) & (__mask)) +      \
+	       BUILD_BUG_ON_ZERO(!__is_constexpr(__mask)) +             \
+	       BUILD_BUG_ON_ZERO((__mask) == 0 || (__mask) > U8_MAX) +          \
+	       BUILD_BUG_ON_ZERO(!IS_POWER_OF_2((__mask) + (1ULL << __bf_shf(__mask)))) + \
+	       BUILD_BUG_ON_ZERO(__builtin_choose_expr(__is_constexpr(__val), (~((__mask) >> __bf_shf(__mask)) & (__val)), 0))))
+
+/**
  * REG_FIELD_GET() - Extract a u32 bitfield value
  * @__mask: shifted mask defining the field's length and position
  * @__val: value to extract the bitfield value from
@@ -155,6 +200,18 @@
  */
 #define _PICK(__index, ...) (((const u32 []){ __VA_ARGS__ })[__index])
 
+/**
+ * REG_FIELD_GET8() - Extract a u8 bitfield value
+ * @__mask: shifted mask defining the field's length and position
+ * @__val: value to extract the bitfield value from
+ *
+ * Local wrapper for FIELD_GET() to force u8 and for consistency with
+ * REG_FIELD_PREP(), REG_BIT() and REG_GENMASK().
+ *
+ * @return: Masked and shifted value of the field defined by @__mask in @__val.
+ */
+#define REG_FIELD_GET8(__mask, __val)   ((u8)FIELD_GET(__mask, __val))
+
 typedef struct {
 	u32 reg;
 } i915_reg_t;