Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.19.

  Rob has some new hardware support for new qualcomm hw that I'll send
  along separately. This has the display part of it, the remaining pull
  is for the acceleration engine.

  This also contains a wound-wait/wait-die mutex rework, Peter has acked
  it for merging via my tree.

  Otherwise mostly the usual level of activity. Summary:

  core:
   - Wound-wait/wait-die mutex rework
   - Add writeback connector type
   - Add "content type" property for HDMI
   - Move GEM bo to drm_framebuffer
   - Initial gpu scheduler documentation
   - GPU scheduler fixes for dying processes
   - Console deferred fbcon takeover support
   - Displayport support for CEC tunneling over AUX

  panel:
   - otm8009a panel driver fixes
   - Innolux TV123WAM and G070Y2-L01 panel driver
   - Ilitek ILI9881c panel driver
   - Rocktech RK070ER9427 LCD
   - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
   - DLC DLC0700YZG-1
   - BOE HV070WSA-100
   - newhaven, nhd-4.3-480272ef-atxl LCD
   - DataImage SCF0700C48GGU18
   - Sharp LQ035Q7DB03
   - p079zca: Refactor to support multiple panels

  tinydrm:
   - ILI9341 display panel

  New driver:
   - vkms - virtual kms driver to testing.

  i915:
   - Icelake:
        Display enablement
        DSI support
        IRQ support
        Powerwell support
   - GPU reset fixes and improvements
   - Full ppgtt support refactoring
   - PSR fixes and improvements
   - Execlist improvments
   - GuC related fixes

  amdgpu:
   - Initial amdgpu documentation
   - JPEG engine support on VCN
   - CIK uses powerplay by default
   - Move to using core PCIE functionality for gens/lanes
   - DC/Powerplay interface rework
   - Stutter mode support for RV
   - Vega12 Powerplay updates
   - GFXOFF fixes
   - GPUVM fault debugging
   - Vega12 GFXOFF
   - DC improvements
   - DC i2c/aux changes
   - UVD 7.2 fixes
   - Powerplay fixes for Polaris12, CZ/ST
   - command submission bo_list fixes

  amdkfd:
   - Raven support
   - Power management fixes

  udl:
   - Cleanups and fixes

  nouveau:
   - misc fixes and cleanups.

  msm:
   - DPU1 support display controller in sdm845
   - GPU coredump support.

  vmwgfx:
   - Atomic modesetting validation fixes
   - Support for multisample surfaces

  armada:
   - Atomic modesetting support completed.

  exynos:
   - IPPv2 fixes
   - Move g2d to component framework
   - Suspend/resume support cleanups
   - Driver cleanups

  imx:
   - CSI configuration improvements
   - Driver cleanups
   - Use atomic suspend/resume helpers
   - ipu-v3 V4L2 XRGB32/XBGR32 support

  pl111:
   - Add Nomadik LCDC variant

  v3d:
   - GPU scheduler jobs management

  sun4i:
   - R40 display engine support
   - TCON TOP driver

  mediatek:
   - MT2712 SoC support

  rockchip:
   - vop fixes

  omapdrm:
   - Workaround for DRA7 errata i932
   - Fix mm_list locking

  mali-dp:
   - Writeback implementation
        PM improvements
   - Internal error reporting debugfs

  tilcdc:
   - Single fix for deferred probing

  hdlcd:
   - Teardown fixes

  tda998x:
   - Converted to a bridge driver.

  etnaviv:
   - Misc fixes"

* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
  drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
  drm/scheduler: fix param documentation
  drm/i2c: tda998x: correct PLL divider calculation
  drm/i2c: tda998x: get rid of private fill_modes function
  drm/i2c: tda998x: move mode_valid() to bridge
  drm/i2c: tda998x: register bridge outside of component helper
  drm/i2c: tda998x: cleanup from previous changes
  drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
  drm/i2c: tda998x: convert to bridge driver
  drm/scheduler: fix timeout worker setup for out of order job completions
  drm/amd/display: display connected to dp-1 does not light up
  drm/amd/display: update clk for various HDMI color depths
  drm/amd/display: program display clock on cache match
  drm/amd/display: Add NULL check for enabling dp ss
  drm/amd/display: add vbios table check for enabling dp ss
  drm/amd/display: Don't share clk source between DP and HDMI
  drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
  drm/amd/display: Use calculated disp_clk_khz value for dce110
  drm/amd/display: Implement custom degamma lut on dcn
  drm/amd/display: Destroy aux_engines only once
  ...

1 files changed, 218 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
new file mode 100644
index 000000000000..c66a71f8b839
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -0,0 +1,218 @@
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DPU_HW_CTL_H
+#define _DPU_HW_CTL_H
+
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_util.h"
+#include "dpu_hw_catalog.h"
+#include "dpu_hw_sspp.h"
+#include "dpu_hw_blk.h"
+
+/**
+ * dpu_ctl_mode_sel: Interface mode selection
+ * DPU_CTL_MODE_SEL_VID:    Video mode interface
+ * DPU_CTL_MODE_SEL_CMD:    Command mode interface
+ */
+enum dpu_ctl_mode_sel {
+	DPU_CTL_MODE_SEL_VID = 0,
+	DPU_CTL_MODE_SEL_CMD
+};
+
+struct dpu_hw_ctl;
+/**
+ * struct dpu_hw_stage_cfg - blending stage cfg
+ * @stage : SSPP_ID at each stage
+ * @multirect_index: index of the rectangle of SSPP.
+ */
+struct dpu_hw_stage_cfg {
+	enum dpu_sspp stage[DPU_STAGE_MAX][PIPES_PER_STAGE];
+	enum dpu_sspp_multirect_index multirect_index
+					[DPU_STAGE_MAX][PIPES_PER_STAGE];
+};
+
+/**
+ * struct dpu_hw_intf_cfg :Describes how the DPU writes data to output interface
+ * @intf :                 Interface id
+ * @mode_3d:               3d mux configuration
+ * @intf_mode_sel:         Interface mode, cmd / vid
+ * @stream_sel:            Stream selection for multi-stream interfaces
+ */
+struct dpu_hw_intf_cfg {
+	enum dpu_intf intf;
+	enum dpu_3d_blend_mode mode_3d;
+	enum dpu_ctl_mode_sel intf_mode_sel;
+	int stream_sel;
+};
+
+/**
+ * struct dpu_hw_ctl_ops - Interface to the wb Hw driver functions
+ * Assumption is these functions will be called after clocks are enabled
+ */
+struct dpu_hw_ctl_ops {
+	/**
+	 * kickoff hw operation for Sw controlled interfaces
+	 * DSI cmd mode and WB interface are SW controlled
+	 * @ctx       : ctl path ctx pointer
+	 */
+	void (*trigger_start)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * kickoff prepare is in progress hw operation for sw
+	 * controlled interfaces: DSI cmd mode and WB interface
+	 * are SW controlled
+	 * @ctx       : ctl path ctx pointer
+	 */
+	void (*trigger_pending)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * Clear the value of the cached pending_flush_mask
+	 * No effect on hardware
+	 * @ctx       : ctl path ctx pointer
+	 */
+	void (*clear_pending_flush)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * Query the value of the cached pending_flush_mask
+	 * No effect on hardware
+	 * @ctx       : ctl path ctx pointer
+	 */
+	u32 (*get_pending_flush)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * OR in the given flushbits to the cached pending_flush_mask
+	 * No effect on hardware
+	 * @ctx       : ctl path ctx pointer
+	 * @flushbits : module flushmask
+	 */
+	void (*update_pending_flush)(struct dpu_hw_ctl *ctx,
+		u32 flushbits);
+
+	/**
+	 * Write the value of the pending_flush_mask to hardware
+	 * @ctx       : ctl path ctx pointer
+	 */
+	void (*trigger_flush)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * Read the value of the flush register
+	 * @ctx       : ctl path ctx pointer
+	 * @Return: value of the ctl flush register.
+	 */
+	u32 (*get_flush_register)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * Setup ctl_path interface config
+	 * @ctx
+	 * @cfg    : interface config structure pointer
+	 */
+	void (*setup_intf_cfg)(struct dpu_hw_ctl *ctx,
+		struct dpu_hw_intf_cfg *cfg);
+
+	int (*reset)(struct dpu_hw_ctl *c);
+
+	/*
+	 * wait_reset_status - checks ctl reset status
+	 * @ctx       : ctl path ctx pointer
+	 *
+	 * This function checks the ctl reset status bit.
+	 * If the reset bit is set, it keeps polling the status till the hw
+	 * reset is complete.
+	 * Returns: 0 on success or -error if reset incomplete within interval
+	 */
+	int (*wait_reset_status)(struct dpu_hw_ctl *ctx);
+
+	uint32_t (*get_bitmask_sspp)(struct dpu_hw_ctl *ctx,
+		enum dpu_sspp blk);
+
+	uint32_t (*get_bitmask_mixer)(struct dpu_hw_ctl *ctx,
+		enum dpu_lm blk);
+
+	int (*get_bitmask_intf)(struct dpu_hw_ctl *ctx,
+		u32 *flushbits,
+		enum dpu_intf blk);
+
+	int (*get_bitmask_cdm)(struct dpu_hw_ctl *ctx,
+		u32 *flushbits,
+		enum dpu_cdm blk);
+
+	/**
+	 * Set all blend stages to disabled
+	 * @ctx       : ctl path ctx pointer
+	 */
+	void (*clear_all_blendstages)(struct dpu_hw_ctl *ctx);
+
+	/**
+	 * Configure layer mixer to pipe configuration
+	 * @ctx       : ctl path ctx pointer
+	 * @lm        : layer mixer enumeration
+	 * @cfg       : blend stage configuration
+	 */
+	void (*setup_blendstage)(struct dpu_hw_ctl *ctx,
+		enum dpu_lm lm, struct dpu_hw_stage_cfg *cfg);
+};
+
+/**
+ * struct dpu_hw_ctl : CTL PATH driver object
+ * @base: hardware block base structure
+ * @hw: block register map object
+ * @idx: control path index
+ * @caps: control path capabilities
+ * @mixer_count: number of mixers
+ * @mixer_hw_caps: mixer hardware capabilities
+ * @pending_flush_mask: storage for pending ctl_flush managed via ops
+ * @ops: operation list
+ */
+struct dpu_hw_ctl {
+	struct dpu_hw_blk base;
+	struct dpu_hw_blk_reg_map hw;
+
+	/* ctl path */
+	int idx;
+	const struct dpu_ctl_cfg *caps;
+	int mixer_count;
+	const struct dpu_lm_cfg *mixer_hw_caps;
+	u32 pending_flush_mask;
+
+	/* ops */
+	struct dpu_hw_ctl_ops ops;
+};
+
+/**
+ * dpu_hw_ctl - convert base object dpu_hw_base to container
+ * @hw: Pointer to base hardware block
+ * return: Pointer to hardware block container
+ */
+static inline struct dpu_hw_ctl *to_dpu_hw_ctl(struct dpu_hw_blk *hw)
+{
+	return container_of(hw, struct dpu_hw_ctl, base);
+}
+
+/**
+ * dpu_hw_ctl_init(): Initializes the ctl_path hw driver object.
+ * should be called before accessing every ctl path registers.
+ * @idx:  ctl_path index for which driver object is required
+ * @addr: mapped register io address of MDP
+ * @m :   pointer to mdss catalog data
+ */
+struct dpu_hw_ctl *dpu_hw_ctl_init(enum dpu_ctl idx,
+		void __iomem *addr,
+		struct dpu_mdss_cfg *m);
+
+/**
+ * dpu_hw_ctl_destroy(): Destroys ctl driver context
+ * should be called to free the context
+ */
+void dpu_hw_ctl_destroy(struct dpu_hw_ctl *ctx);
+
+#endif /*_DPU_HW_CTL_H */