Merge tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for MAX31760 fan speed controller

   - Driver for TEXAS TPS546D24 Buck Converter

   - Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller

  Removed drivers:

   - Drop obsolete asus_wmi_ec_sensors driver

  Cleanups, affecting various drivers:

   - Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate

   - Remove forward declarations

   - Move from strlcpy with unused retval to strscpy

   - Make use of devm_clk_get_enabled()

   - Drop devm_of_pwm_get()

  Other notable cleanup and improvements:

   - Support for additional USB devide ID and support for reporting of
     rail mode via debugfs added to corsair-psu driver

   - Support for aditional USB ID in nzxt-smart2 driver

   - Support for Aquacomputer High Flow Next in aquacomputer_d5next
     driver

   - Major cleanup of pwm-fan driver

   - Major cleanup of mr75203 driver, and added support for new device
     revision

  And various other minor fixes and cleanups"

* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
  hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
  hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
  dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
  hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
  hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
  hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...

4 files changed, 87 insertions, 7 deletions

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 951e4a9ff2d6..89668af67206 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -397,6 +397,15 @@ config SENSORS_TPS53679
 	  This driver can also be built as a module. If so, the module will
 	  be called tps53679.
 
+config SENSORS_TPS546D24
+	tristate "TPS546D24"
+	help
+	  If you say yes here you get hardware monitoring support for TEXAS
+	  TPS546D24.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tps546d24
+
 config SENSORS_UCD9000
 	tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
 	help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index e2fe86f98965..0002dbe22d52 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
 obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
+obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o
 obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
 obj-$(CONFIG_SENSORS_UCD9200)	+= ucd9200.o
 obj-$(CONFIG_SENSORS_XDPE122)	+= xdpe12284.o
diff --git a/drivers/hwmon/pmbus/mp2888.c b/drivers/hwmon/pmbus/mp2888.c
index 8ecd4adfef40..24e5194706cf 100644
--- a/drivers/hwmon/pmbus/mp2888.c
+++ b/drivers/hwmon/pmbus/mp2888.c
@@ -34,7 +34,7 @@ struct mp2888_data {
 	int curr_sense_gain;
 };
 
-#define to_mp2888_data(x)  container_of(x, struct mp2888_data, info)
+#define to_mp2888_data(x)	container_of(x, struct mp2888_data, info)
 
 static int mp2888_read_byte_data(struct i2c_client *client, int page, int reg)
 {
@@ -109,7 +109,7 @@ mp2888_read_phase(struct i2c_client *client, struct mp2888_data *data, int page,
 	 * - Kcs is the DrMOS current sense gain of power stage, which is obtained from the
 	 *   register MP2888_MFR_VR_CONFIG1, bits 13-12 with the following selection of DrMOS
 	 *   (data->curr_sense_gain):
-	 *   00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A.
+	 *   00b - 8.5µA/A, 01b - 9.7µA/A, 1b - 10µA/A, 11b - 5µA/A.
 	 * - Rcs is the internal phase current sense resistor. This parameter depends on hardware
 	 *   assembly. By default it is set to 1kΩ. In case of different assembly, user should
 	 *   scale this parameter by dividing it by Rcs.
@@ -118,10 +118,9 @@ mp2888_read_phase(struct i2c_client *client, struct mp2888_data *data, int page,
 	 * because sampling of current occurrence of bit weight has a big deviation, especially for
 	 * light load.
 	 */
-	ret = DIV_ROUND_CLOSEST(ret * 100 - 9800, data->curr_sense_gain);
-	ret = (data->phase_curr_resolution) ? ret * 2 : ret;
+	ret = DIV_ROUND_CLOSEST(ret * 200 - 19600, data->curr_sense_gain);
 	/* Scale according to total current resolution. */
-	ret = (data->total_curr_resolution) ? ret * 8 : ret * 4;
+	ret = (data->total_curr_resolution) ? ret * 2 : ret;
 	return ret;
 }
 
@@ -212,7 +211,7 @@ static int mp2888_read_word_data(struct i2c_client *client, int page, int phase,
 		ret = pmbus_read_word_data(client, page, phase, reg);
 		if (ret < 0)
 			return ret;
-		ret = data->total_curr_resolution ? ret * 2 : ret;
+		ret = data->total_curr_resolution ? ret : DIV_ROUND_CLOSEST(ret, 2);
 		break;
 	case PMBUS_POUT_OP_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase, reg);
@@ -223,7 +222,7 @@ static int mp2888_read_word_data(struct i2c_client *client, int page, int phase,
 		 * set 1. Actual power is reported with 0.5W or 1W respectively resolution. Scaling
 		 * is needed to match both.
 		 */
-		ret = data->total_curr_resolution ? ret * 4 : ret * 2;
+		ret = data->total_curr_resolution ? ret * 2 : ret;
 		break;
 	/*
 	 * The below registers are not implemented by device or implemented not according to the
diff --git a/drivers/hwmon/pmbus/tps546d24.c b/drivers/hwmon/pmbus/tps546d24.c
new file mode 100644
index 000000000000..435f94304ad8
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps546d24.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for TEXAS TPS546D24 buck converter
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info tps546d24_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+			| PMBUS_HAVE_IOUT | PMBUS_HAVE_VOUT
+			| PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT
+			| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int tps546d24_probe(struct i2c_client *client)
+{
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+	if (reg < 0)
+		return reg;
+
+	if (reg & 0x80) {
+		int err;
+
+		err = i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, reg & 0x7f);
+		if (err < 0)
+			return err;
+	}
+	return pmbus_do_probe(client, &tps546d24_info);
+}
+
+static const struct i2c_device_id tps546d24_id[] = {
+	{"tps546d24", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tps546d24_id);
+
+static const struct of_device_id __maybe_unused tps546d24_of_match[] = {
+	{.compatible = "ti,tps546d24"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, tps546d24_of_match);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tps546d24_driver = {
+	.driver = {
+		   .name = "tps546d24",
+		   .of_match_table = of_match_ptr(tps546d24_of_match),
+	   },
+	.probe_new = tps546d24_probe,
+	.id_table = tps546d24_id,
+};
+
+module_i2c_driver(tps546d24_driver);
+
+MODULE_AUTHOR("Duke Du <dukedu83@gmail.com>");
+MODULE_DESCRIPTION("PMBus driver for TI tps546d24");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);