Merge branch 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This pull request contains:

   - i2c core reorganization. One source file became too monolithic. It
     is now split up, yet we still have the same named object as the
     final output. This should ease maintenance.

   - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX

   - designware driver gained slave mode support

   - xgene-slimpro driver gained ACPI support

   - bigger overhaul for pca-platform driver

   - the algo-bit module now supports messages with enforced STOP

   - slightly bigger than usual set of driver updates and improvements

  and with much appreciated quality assurance from Andy Shevchenko"

* 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: Provide a stub for i2c_detect_slave_mode()
  i2c: designware: Let slave adapter support be optional
  i2c: designware: Make HW init functions static
  i2c: designware: fix spelling mistakes
  i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
  i2c: pca-platform: correctly set algo_data.reset_chip
  i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
  i2c: designware: enable SLAVE in platform module
  i2c: designware: add SLAVE mode functions
  i2c: zx2967: drop COMPILE_TEST dependency
  i2c: zx2967: always use the same device when printing errors
  i2c: pca-platform: use dev_warn/dev_info instead of printk
  i2c: pca-platform: use device managed allocations
  i2c: pca-platform: add devicetree awareness
  i2c: pca-platform: switch to struct gpio_desc
  dt-bindings: add bindings for i2c-pca-platform
  i2c: cadance: fix ctrl/addr reg write order
  i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family i2c controller
  i2c: algo-bit: add support for I2C_M_STOP
  ...

1 files changed, 10 insertions, 6 deletions

diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index fabbb9e49161..38dd61d621df 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -274,7 +274,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
 		if (!dev->use_alt_cmd)
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 
-	dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
 	++dev->buf;
 }
@@ -402,7 +402,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 			dev->msg->flags &= ~I2C_M_RECV_LEN;
 			dev->buf_len += *dev->buf;
 			dev->msg->len = dev->buf_len + 1;
-			dev_dbg(dev->dev, "received block length %d\n",
+			dev_dbg(dev->dev, "received block length %zu\n",
 					 dev->buf_len);
 		} else {
 			/* abort and send the stop by reading one more byte */
@@ -415,7 +415,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 	if (!dev->use_alt_cmd && dev->buf_len == 1)
 		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 
-	dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+	dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
 	++dev->buf;
 }
@@ -622,7 +622,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	 * writing the corresponding bit into the Control Register.
 	 */
 
-	dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
+	dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
 		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
 
 	reinit_completion(&dev->cmd_complete);
@@ -1083,12 +1083,16 @@ static int at91_twi_probe(struct platform_device *pdev)
 		dev_err(dev->dev, "no clock defined\n");
 		return -ENODEV;
 	}
-	clk_prepare_enable(dev->clk);
+	rc = clk_prepare_enable(dev->clk);
+	if (rc)
+		return rc;
 
 	if (dev->dev->of_node) {
 		rc = at91_twi_configure_dma(dev, phy_addr);
-		if (rc == -EPROBE_DEFER)
+		if (rc == -EPROBE_DEFER) {
+			clk_disable_unprepare(dev->clk);
 			return rc;
+		}
 	}
 
 	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",