summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorChris Brandt <chris.brandt@renesas.com>2017-10-27 18:37:56 +0300
committerWolfram Sang <wsa@the-dreams.de>2017-10-27 22:39:29 +0300
commitd982d66514192cdbe74eababa63d0a69be4b0ce1 (patch)
treebcc1f1d661623d1bee887df04ca3d19ce240fe7c /drivers/i2c
parent9b09342f5cfa5b4b3447de17de284111bfdeab26 (diff)
downloadlinux-d982d66514192cdbe74eababa63d0a69be4b0ce1.tar.xz
i2c: riic: remove clock and frequency restrictions
Remove the restriction that the parent clock has to be a specific frequency and also allow any speed to be supported. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-riic.c115
1 files changed, 81 insertions, 34 deletions
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index c811af4c8d81..95c2f1ce3cad 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -84,12 +84,7 @@
#define ICSR2_NACKF 0x10
-/* ICBRx (@ PCLK 33MHz) */
#define ICBR_RESERVED 0xe0 /* Should be 1 on writes */
-#define ICBRL_SP100K (19 | ICBR_RESERVED)
-#define ICBRH_SP100K (16 | ICBR_RESERVED)
-#define ICBRL_SP400K (21 | ICBR_RESERVED)
-#define ICBRH_SP400K (9 | ICBR_RESERVED)
#define RIIC_INIT_MSG -1
@@ -288,48 +283,99 @@ static const struct i2c_algorithm riic_algo = {
.functionality = riic_func,
};
-static int riic_init_hw(struct riic_dev *riic, u32 spd)
+static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
{
int ret;
unsigned long rate;
+ int total_ticks, cks, brl, brh;
ret = clk_prepare_enable(riic->clk);
if (ret)
return ret;
+ if (t->bus_freq_hz > 400000) {
+ dev_err(&riic->adapter.dev,
+ "unsupported bus speed (%dHz). 400000 max\n",
+ t->bus_freq_hz);
+ clk_disable_unprepare(riic->clk);
+ return -EINVAL;
+ }
+
+ rate = clk_get_rate(riic->clk);
+
/*
- * TODO: Implement formula to calculate the timing values depending on
- * variable parent clock rate and arbitrary bus speed
+ * Assume the default register settings:
+ * FER.SCLE = 1 (SCL sync circuit enabled, adds 2 or 3 cycles)
+ * FER.NFE = 1 (noise circuit enabled)
+ * MR3.NF = 0 (1 cycle of noise filtered out)
+ *
+ * Freq (CKS=000) = (I2CCLK + tr + tf)/ (BRH + 3 + 1) + (BRL + 3 + 1)
+ * Freq (CKS!=000) = (I2CCLK + tr + tf)/ (BRH + 2 + 1) + (BRL + 2 + 1)
*/
- rate = clk_get_rate(riic->clk);
- if (rate != 33325000) {
- dev_err(&riic->adapter.dev,
- "invalid parent clk (%lu). Must be 33325000Hz\n", rate);
+
+ /*
+ * Determine reference clock rate. We must be able to get the desired
+ * frequency with only 62 clock ticks max (31 high, 31 low).
+ * Aim for a duty of 60% LOW, 40% HIGH.
+ */
+ total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz);
+
+ for (cks = 0; cks < 7; cks++) {
+ /*
+ * 60% low time must be less than BRL + 2 + 1
+ * BRL max register value is 0x1F.
+ */
+ brl = ((total_ticks * 6) / 10);
+ if (brl <= (0x1F + 3))
+ break;
+
+ total_ticks /= 2;
+ rate /= 2;
+ }
+
+ if (brl > (0x1F + 3)) {
+ dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n",
+ (unsigned long)t->bus_freq_hz);
clk_disable_unprepare(riic->clk);
return -EINVAL;
}
+ brh = total_ticks - brl;
+
+ /* Remove automatic clock ticks for sync circuit and NF */
+ if (cks == 0) {
+ brl -= 4;
+ brh -= 4;
+ } else {
+ brl -= 3;
+ brh -= 3;
+ }
+
+ /*
+ * Remove clock ticks for rise and fall times. Convert ns to clock
+ * ticks.
+ */
+ brl -= t->scl_fall_ns / (1000000000 / rate);
+ brh -= t->scl_rise_ns / (1000000000 / rate);
+
+ /* Adjust for min register values for when SCLE=1 and NFE=1 */
+ if (brl < 1)
+ brl = 1;
+ if (brh < 1)
+ brh = 1;
+
+ pr_debug("i2c-riic: freq=%lu, duty=%d, fall=%lu, rise=%lu, cks=%d, brl=%d, brh=%d\n",
+ rate / total_ticks, ((brl + 3) * 100) / (brl + brh + 6),
+ t->scl_fall_ns / (1000000000 / rate),
+ t->scl_rise_ns / (1000000000 / rate), cks, brl, brh);
+
/* Changing the order of accessing IICRST and ICE may break things! */
writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1);
riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1);
- switch (spd) {
- case 100000:
- writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1);
- writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH);
- writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL);
- break;
- case 400000:
- writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1);
- writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH);
- writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL);
- break;
- default:
- dev_err(&riic->adapter.dev,
- "unsupported bus speed (%dHz). Use 100000 or 400000\n", spd);
- clk_disable_unprepare(riic->clk);
- return -EINVAL;
- }
+ writeb(ICMR1_CKS(cks), riic->base + RIIC_ICMR1);
+ writeb(brh | ICBR_RESERVED, riic->base + RIIC_ICBRH);
+ writeb(brl | ICBR_RESERVED, riic->base + RIIC_ICBRL);
writeb(0, riic->base + RIIC_ICSER);
writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3);
@@ -351,11 +397,10 @@ static struct riic_irq_desc riic_irqs[] = {
static int riic_i2c_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
struct riic_dev *riic;
struct i2c_adapter *adap;
struct resource *res;
- u32 bus_rate = 0;
+ struct i2c_timings i2c_t;
int i, ret;
riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
@@ -396,8 +441,9 @@ static int riic_i2c_probe(struct platform_device *pdev)
init_completion(&riic->msg_done);
- of_property_read_u32(np, "clock-frequency", &bus_rate);
- ret = riic_init_hw(riic, bus_rate);
+ i2c_parse_fw_timings(&pdev->dev, &i2c_t, true);
+
+ ret = riic_init_hw(riic, &i2c_t);
if (ret)
return ret;
@@ -408,7 +454,8 @@ static int riic_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, riic);
- dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate);
+ dev_info(&pdev->dev, "registered with %dHz bus speed\n",
+ i2c_t.bus_freq_hz);
return 0;
}