summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2013-06-10 18:00:00 +0400
committerJonathan Cameron <jic23@kernel.org>2013-06-11 23:34:36 +0400
commit32341859f04e0f0d418d0d0eec903a959cb09ebb (patch)
treea7aafb3ea7b602aed94bfa7a4e62497cd54de6d6 /drivers/iio
parent597e1a86df7965f638045fea04bd3fde57f8bd04 (diff)
downloadlinux-32341859f04e0f0d418d0d0eec903a959cb09ebb.tar.xz
staging:iio:adis16130: Move out of staging
The adis16130 driver is fairly simple and it a good shape now, so move it out of staging. Remove an outdated FIXME along the way. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/gyro/Kconfig7
-rw-r--r--drivers/iio/gyro/Makefile1
-rw-r--r--drivers/iio/gyro/adis16130.c207
3 files changed, 215 insertions, 0 deletions
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index b8daf1b2ea06..8498e9dcda68 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -10,6 +10,13 @@ config ADIS16080
Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw
Rate Gyroscope with SPI.
+config ADIS16130
+ tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices ADIS16130 High Precision
+ Angular Rate Sensor driver.
+
config ADIS16136
tristate "Analog devices ADIS16136 and similar gyroscopes driver"
depends on SPI_MASTER
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
index 225d289082e6..e9dc034aa18b 100644
--- a/drivers/iio/gyro/Makefile
+++ b/drivers/iio/gyro/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_ADIS16080) += adis16080.o
+obj-$(CONFIG_ADIS16130) += adis16130.o
obj-$(CONFIG_ADIS16136) += adis16136.o
obj-$(CONFIG_ADXRS450) += adxrs450.o
diff --git a/drivers/iio/gyro/adis16130.c b/drivers/iio/gyro/adis16130.c
new file mode 100644
index 000000000000..129acdf801a4
--- /dev/null
+++ b/drivers/iio/gyro/adis16130.c
@@ -0,0 +1,207 @@
+/*
+ * ADIS16130 Digital Output, High Precision Angular Rate Sensor driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+#define ADIS16130_CON 0x0
+#define ADIS16130_CON_RD (1 << 6)
+#define ADIS16130_IOP 0x1
+
+/* 1 = data-ready signal low when unread data on all channels; */
+#define ADIS16130_IOP_ALL_RDY (1 << 3)
+#define ADIS16130_IOP_SYNC (1 << 0) /* 1 = synchronization enabled */
+#define ADIS16130_RATEDATA 0x8 /* Gyroscope output, rate of rotation */
+#define ADIS16130_TEMPDATA 0xA /* Temperature output */
+#define ADIS16130_RATECS 0x28 /* Gyroscope channel setup */
+#define ADIS16130_RATECS_EN (1 << 3) /* 1 = channel enable; */
+#define ADIS16130_TEMPCS 0x2A /* Temperature channel setup */
+#define ADIS16130_TEMPCS_EN (1 << 3)
+#define ADIS16130_RATECONV 0x30
+#define ADIS16130_TEMPCONV 0x32
+#define ADIS16130_MODE 0x38
+#define ADIS16130_MODE_24BIT (1 << 1) /* 1 = 24-bit resolution; */
+
+/**
+ * struct adis16130_state - device instance specific data
+ * @us: actual spi_device to write data
+ * @buf_lock: mutex to protect tx and rx
+ * @buf: unified tx/rx buffer
+ **/
+struct adis16130_state {
+ struct spi_device *us;
+ struct mutex buf_lock;
+ u8 buf[4] ____cacheline_aligned;
+};
+
+static int adis16130_spi_read(struct iio_dev *indio_dev, u8 reg_addr, u32 *val)
+{
+ int ret;
+ struct adis16130_state *st = iio_priv(indio_dev);
+ struct spi_message msg;
+ struct spi_transfer xfer = {
+ .tx_buf = st->buf,
+ .rx_buf = st->buf,
+ .len = 4,
+ };
+
+ mutex_lock(&st->buf_lock);
+
+ st->buf[0] = ADIS16130_CON_RD | reg_addr;
+ st->buf[1] = st->buf[2] = st->buf[3] = 0;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+ ret = spi_sync(st->us, &msg);
+
+ if (ret == 0)
+ *val = (st->buf[1] << 16) | (st->buf[2] << 8) | st->buf[3];
+ mutex_unlock(&st->buf_lock);
+
+ return ret;
+}
+
+static int adis16130_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2,
+ long mask)
+{
+ int ret;
+ u32 temp;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ /* Take the iio_dev status lock */
+ mutex_lock(&indio_dev->mlock);
+ ret = adis16130_spi_read(indio_dev, chan->address, &temp);
+ mutex_unlock(&indio_dev->mlock);
+ if (ret)
+ return ret;
+ *val = temp;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ /* 0 degree = 838860, 250 degree = 14260608 */
+ *val = 250;
+ *val2 = 336440817; /* RAD_TO_DEGREE(14260608 - 8388608) */
+ return IIO_VAL_FRACTIONAL;
+ case IIO_TEMP:
+ /* 0C = 8036283, 105C = 9516048 */
+ *val = 105000;
+ *val2 = 9516048 - 8036283;
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case IIO_CHAN_INFO_OFFSET:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = -8388608;
+ return IIO_VAL_INT;
+ case IIO_TEMP:
+ *val = -8036283;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16130_channels[] = {
+ {
+ .type = IIO_ANGL_VEL,
+ .modified = 1,
+ .channel2 = IIO_MOD_Z,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .address = ADIS16130_RATEDATA,
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .address = ADIS16130_TEMPDATA,
+ }
+};
+
+static const struct iio_info adis16130_info = {
+ .read_raw = &adis16130_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int adis16130_probe(struct spi_device *spi)
+{
+ int ret;
+ struct adis16130_state *st;
+ struct iio_dev *indio_dev;
+
+ /* setup the industrialio driver allocated elements */
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ st = iio_priv(indio_dev);
+ /* this is only used for removal purposes */
+ spi_set_drvdata(spi, indio_dev);
+ st->us = spi;
+ mutex_init(&st->buf_lock);
+ indio_dev->name = spi->dev.driver->name;
+ indio_dev->channels = adis16130_channels;
+ indio_dev->num_channels = ARRAY_SIZE(adis16130_channels);
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->info = &adis16130_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_free_dev;
+
+ return 0;
+
+error_free_dev:
+ iio_device_free(indio_dev);
+
+error_ret:
+ return ret;
+}
+
+static int adis16130_remove(struct spi_device *spi)
+{
+ iio_device_unregister(spi_get_drvdata(spi));
+ iio_device_free(spi_get_drvdata(spi));
+
+ return 0;
+}
+
+static struct spi_driver adis16130_driver = {
+ .driver = {
+ .name = "adis16130",
+ .owner = THIS_MODULE,
+ },
+ .probe = adis16130_probe,
+ .remove = adis16130_remove,
+};
+module_spi_driver(adis16130_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16130 High Precision Angular Rate");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:adis16130");