diff options
author | Jiri Valek - 2N <jiriv@axis.com> | 2023-12-12 05:54:45 +0300 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2023-12-13 06:17:49 +0300 |
commit | 2e3ae00021901461455b6a9ff4ef850817e9ab6d (patch) | |
tree | fc9b72554b6672263f7b0801f6381fe533e9dca5 /drivers/input/keyboard | |
parent | e4af6bb1f62fe30f19171322374f021bbcdc5b04 (diff) | |
download | linux-2e3ae00021901461455b6a9ff4ef850817e9ab6d.tar.xz |
Input: cap11xx - add advanced sensitivity settings
Add support for advanced sensitivity settings that allows more precise
tunig of touch buttons. Input-treshold allows to set the sensitivity for
each channel separately. Also add signal guard feature for CAP129x chips.
Signed-off-by: Jiri Valek - 2N <jiriv@axis.com>
Link: https://lore.kernel.org/r/20231121155250.613242-3-jiriv@axis.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers/input/keyboard')
-rw-r--r-- | drivers/input/keyboard/cap11xx.c | 237 |
1 files changed, 192 insertions, 45 deletions
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c index 01e7ead68fea..ebcbc00d2059 100644 --- a/drivers/input/keyboard/cap11xx.c +++ b/drivers/input/keyboard/cap11xx.c @@ -14,6 +14,7 @@ #include <linux/regmap.h> #include <linux/i2c.h> #include <linux/gpio/consumer.h> +#include <linux/bitfield.h> #define CAP11XX_REG_MAIN_CONTROL 0x00 #define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6) @@ -24,6 +25,7 @@ #define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a #define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X)) #define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f +#define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK 0x70 #define CAP11XX_REG_CONFIG 0x20 #define CAP11XX_REG_SENSOR_ENABLE 0x21 #define CAP11XX_REG_SENSOR_CONFIG 0x22 @@ -32,6 +34,7 @@ #define CAP11XX_REG_CALIBRATION 0x26 #define CAP11XX_REG_INT_ENABLE 0x27 #define CAP11XX_REG_REPEAT_RATE 0x28 +#define CAP11XX_REG_SIGNAL_GUARD_ENABLE 0x29 #define CAP11XX_REG_MT_CONFIG 0x2a #define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b #define CAP11XX_REG_MT_PATTERN 0x2d @@ -47,6 +50,8 @@ #define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) #define CAP11XX_REG_LED_POLARITY 0x73 #define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74 +#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG 0x80 +#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2 0x81 #define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90 #define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91 @@ -78,12 +83,20 @@ struct cap11xx_led { struct cap11xx_priv { struct regmap *regmap; + struct device *dev; struct input_dev *idev; + const struct cap11xx_hw_model *model; + u8 id; struct cap11xx_led *leds; int num_leds; /* config */ + u8 analog_gain; + u8 sensitivity_delta_sense; + u8 signal_guard_inputs_mask; + u32 thresholds[8]; + u32 calib_sensitivities[8]; u32 keycodes[]; }; @@ -181,6 +194,175 @@ static const struct regmap_config cap11xx_regmap_config = { .volatile_reg = cap11xx_volatile_reg, }; +static int cap11xx_write_calib_sens_config_1(struct cap11xx_priv *priv) +{ + return regmap_write(priv->regmap, + CAP11XX_REG_CALIB_SENSITIVITY_CONFIG, + (priv->calib_sensitivities[3] << 6) | + (priv->calib_sensitivities[2] << 4) | + (priv->calib_sensitivities[1] << 2) | + priv->calib_sensitivities[0]); +} + +static int cap11xx_write_calib_sens_config_2(struct cap11xx_priv *priv) +{ + return regmap_write(priv->regmap, + CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2, + (priv->calib_sensitivities[7] << 6) | + (priv->calib_sensitivities[6] << 4) | + (priv->calib_sensitivities[5] << 2) | + priv->calib_sensitivities[4]); +} + +static int cap11xx_init_keys(struct cap11xx_priv *priv) +{ + struct device_node *node = priv->dev->of_node; + struct device *dev = priv->dev; + int i, error; + u32 u32_val; + + if (!node) { + dev_err(dev, "Corresponding DT entry is not available\n"); + return -ENODEV; + } + + if (!of_property_read_u32(node, "microchip,sensor-gain", &u32_val)) { + if (priv->model->no_gain) { + dev_warn(dev, + "This model doesn't support 'sensor-gain'\n"); + } else if (is_power_of_2(u32_val) && u32_val <= 8) { + priv->analog_gain = (u8)ilog2(u32_val); + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, + priv->analog_gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + } else { + dev_err(dev, "Invalid sensor-gain value %u\n", u32_val); + return -EINVAL; + } + } + + if (of_property_read_bool(node, "microchip,irq-active-high")) { + if (priv->id == CAP1106 || + priv->id == CAP1126 || + priv->id == CAP1188) { + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_CONFIG2, + CAP11XX_REG_CONFIG2_ALT_POL, + 0); + if (error) + return error; + } else { + dev_warn(dev, + "This model doesn't support 'irq-active-high'\n"); + } + } + + if (!of_property_read_u32(node, "microchip,sensitivity-delta-sense", &u32_val)) { + if (!is_power_of_2(u32_val) || u32_val > 128) { + dev_err(dev, "Invalid sensitivity-delta-sense value %u\n", u32_val); + return -EINVAL; + } + + priv->sensitivity_delta_sense = (u8)ilog2(u32_val); + u32_val = ~(FIELD_PREP(CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK, + priv->sensitivity_delta_sense)); + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_SENSITIVITY_CONTROL, + CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK, + u32_val); + if (error) + return error; + } + + if (!of_property_read_u32_array(node, "microchip,input-threshold", + priv->thresholds, priv->model->num_channels)) { + for (i = 0; i < priv->model->num_channels; i++) { + if (priv->thresholds[i] > 127) { + dev_err(dev, "Invalid input-threshold value %u\n", + priv->thresholds[i]); + return -EINVAL; + } + + error = regmap_write(priv->regmap, + CAP11XX_REG_SENSOR_THRESH(i), + priv->thresholds[i]); + if (error) + return error; + } + } + + if (!of_property_read_u32_array(node, "microchip,calib-sensitivity", + priv->calib_sensitivities, + priv->model->num_channels)) { + if (priv->id == CAP1293 || priv->id == CAP1298) { + for (i = 0; i < priv->model->num_channels; i++) { + if (!is_power_of_2(priv->calib_sensitivities[i]) || + priv->calib_sensitivities[i] > 4) { + dev_err(dev, "Invalid calib-sensitivity value %u\n", + priv->calib_sensitivities[i]); + return -EINVAL; + } + priv->calib_sensitivities[i] = ilog2(priv->calib_sensitivities[i]); + } + + error = cap11xx_write_calib_sens_config_1(priv); + if (error) + return error; + + if (priv->id == CAP1298) { + error = cap11xx_write_calib_sens_config_2(priv); + if (error) + return error; + } + } else { + dev_warn(dev, + "This model doesn't support 'calib-sensitivity'\n"); + } + } + + for (i = 0; i < priv->model->num_channels; i++) { + if (!of_property_read_u32_index(node, "microchip,signal-guard", + i, &u32_val)) { + if (u32_val > 1) + return -EINVAL; + if (u32_val) + priv->signal_guard_inputs_mask |= 0x01 << i; + } + } + + if (priv->signal_guard_inputs_mask) { + if (priv->id == CAP1293 || priv->id == CAP1298) { + error = regmap_write(priv->regmap, + CAP11XX_REG_SIGNAL_GUARD_ENABLE, + priv->signal_guard_inputs_mask); + if (error) + return error; + } else { + dev_warn(dev, + "This model doesn't support 'signal-guard'\n"); + } + } + + /* Provide some useful defaults */ + for (i = 0; i < priv->model->num_channels; i++) + priv->keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + priv->keycodes, priv->model->num_channels); + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + if (error) + return error; + + return 0; +} + static irqreturn_t cap11xx_thread_func(int irq_num, void *data) { struct cap11xx_priv *priv = data; @@ -332,11 +514,9 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) const struct i2c_device_id *id = i2c_client_get_device_id(i2c_client); struct device *dev = &i2c_client->dev; struct cap11xx_priv *priv; - struct device_node *node; const struct cap11xx_hw_model *cap; - int i, error, gain = 0; + int i, error; unsigned int val, rev; - u32 gain32; if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) { dev_err(dev, "Invalid device ID %lu\n", id->driver_data); @@ -355,6 +535,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) if (!priv) return -ENOMEM; + priv->dev = dev; + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config); if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); @@ -384,50 +566,15 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) return error; dev_info(dev, "CAP11XX detected, model %s, revision 0x%02x\n", - id->name, rev); - node = dev->of_node; - - if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { - if (cap->no_gain) - dev_warn(dev, - "This version doesn't support sensor gain\n"); - else if (is_power_of_2(gain32) && gain32 <= 8) - gain = ilog2(gain32); - else - dev_err(dev, "Invalid sensor-gain value %d\n", gain32); - } + id->name, rev); - if (id->driver_data == CAP1106 || - id->driver_data == CAP1126 || - id->driver_data == CAP1188) { - if (of_property_read_bool(node, "microchip,irq-active-high")) { - error = regmap_update_bits(priv->regmap, - CAP11XX_REG_CONFIG2, - CAP11XX_REG_CONFIG2_ALT_POL, - 0); - if (error) - return error; - } - } + priv->model = cap; + priv->id = id->driver_data; - /* Provide some useful defaults */ - for (i = 0; i < cap->num_channels; i++) - priv->keycodes[i] = KEY_A + i; - - of_property_read_u32_array(node, "linux,keycodes", - priv->keycodes, cap->num_channels); - - if (!cap->no_gain) { - error = regmap_update_bits(priv->regmap, - CAP11XX_REG_MAIN_CONTROL, - CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, - gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); - if (error) - return error; - } + dev_info(dev, "CAP11XX device detected, model %s, revision 0x%02x\n", + id->name, rev); - /* Disable autorepeat. The Linux input system has its own handling. */ - error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + error = cap11xx_init_keys(priv); if (error) return error; @@ -439,7 +586,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client) priv->idev->id.bustype = BUS_I2C; priv->idev->evbit[0] = BIT_MASK(EV_KEY); - if (of_property_read_bool(node, "autorepeat")) + if (of_property_read_bool(dev->of_node, "autorepeat")) __set_bit(EV_REP, priv->idev->evbit); for (i = 0; i < cap->num_channels; i++) |