Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

8 files changed, 203 insertions, 56 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index d1b6ef9fd8d4..529614d364fe 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -96,6 +96,7 @@ config TOUCHSCREEN_AD7879_SPI
 config TOUCHSCREEN_ADC
 	tristate "Generic ADC based resistive touchscreen"
 	depends on IIO
+	select IIO_BUFFER
 	select IIO_BUFFER_CB
 	help
 	  Say Y here if you want to use the generic ADC
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 93fc182f5e84..f113a27aeb1e 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -1239,7 +1239,8 @@ static int ads7846_probe(struct spi_device *spi)
 	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
 	 */
 	spi->bits_per_word = 8;
-	spi->mode = SPI_MODE_0;
+	spi->mode &= ~SPI_MODE_X_MASK;
+	spi->mode |= SPI_MODE_0;
 	err = spi_setup(spi);
 	if (err < 0)
 		return err;
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index f5a86aa9690e..383a848eb601 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -2180,11 +2180,11 @@ static int mxt_initialize(struct mxt_data *data)
 		msleep(MXT_FW_RESET_TIME);
 	}
 
-	error = mxt_acquire_irq(data);
+	error = mxt_check_retrigen(data);
 	if (error)
 		return error;
 
-	error = mxt_check_retrigen(data);
+	error = mxt_acquire_irq(data);
 	if (error)
 		return error;
 
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index c1b728e47827..c682b028f0a2 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -157,6 +157,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = {
 	{ .id = "5663", .data = &gt1x_chip_data },
 	{ .id = "5688", .data = &gt1x_chip_data },
 	{ .id = "917S", .data = &gt1x_chip_data },
+	{ .id = "9286", .data = &gt1x_chip_data },
 
 	{ .id = "911", .data = &gt911_chip_data },
 	{ .id = "9271", .data = &gt911_chip_data },
@@ -193,6 +194,18 @@ static const struct dmi_system_id rotated_screen[] = {
 		},
 	},
 	{
+		.ident = "Teclast X98 Pro",
+		.matches = {
+			/*
+			 * Only match BIOS date, because the manufacturers
+			 * BIOS does not report the board name at all
+			 * (sometimes)...
+			 */
+			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
+		},
+	},
+	{
 		.ident = "WinBook TW100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
@@ -1436,6 +1449,7 @@ static const struct of_device_id goodix_of_match[] = {
 	{ .compatible = "goodix,gt927" },
 	{ .compatible = "goodix,gt9271" },
 	{ .compatible = "goodix,gt928" },
+	{ .compatible = "goodix,gt9286" },
 	{ .compatible = "goodix,gt967" },
 	{ }
 };
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
index 199cf3daec10..d8fccf048bf4 100644
--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -29,11 +29,13 @@ struct ili2xxx_chip {
 			void *buf, size_t len);
 	int (*get_touch_data)(struct i2c_client *client, u8 *data);
 	bool (*parse_touch_data)(const u8 *data, unsigned int finger,
-				 unsigned int *x, unsigned int *y);
+				 unsigned int *x, unsigned int *y,
+				 unsigned int *z);
 	bool (*continue_polling)(const u8 *data, bool touch);
 	unsigned int max_touches;
 	unsigned int resolution;
 	bool has_calibrate_reg;
+	bool has_pressure_reg;
 };
 
 struct ili210x {
@@ -82,7 +84,8 @@ static int ili210x_read_touch_data(struct i2c_client *client, u8 *data)
 
 static bool ili210x_touchdata_to_coords(const u8 *touchdata,
 					unsigned int finger,
-					unsigned int *x, unsigned int *y)
+					unsigned int *x, unsigned int *y,
+					unsigned int *z)
 {
 	if (touchdata[0] & BIT(finger))
 		return false;
@@ -137,7 +140,8 @@ static int ili211x_read_touch_data(struct i2c_client *client, u8 *data)
 
 static bool ili211x_touchdata_to_coords(const u8 *touchdata,
 					unsigned int finger,
-					unsigned int *x, unsigned int *y)
+					unsigned int *x, unsigned int *y,
+					unsigned int *z)
 {
 	u32 data;
 
@@ -169,7 +173,8 @@ static const struct ili2xxx_chip ili211x_chip = {
 
 static bool ili212x_touchdata_to_coords(const u8 *touchdata,
 					unsigned int finger,
-					unsigned int *x, unsigned int *y)
+					unsigned int *x, unsigned int *y,
+					unsigned int *z)
 {
 	u16 val;
 
@@ -235,7 +240,8 @@ static int ili251x_read_touch_data(struct i2c_client *client, u8 *data)
 
 static bool ili251x_touchdata_to_coords(const u8 *touchdata,
 					unsigned int finger,
-					unsigned int *x, unsigned int *y)
+					unsigned int *x, unsigned int *y,
+					unsigned int *z)
 {
 	u16 val;
 
@@ -245,6 +251,7 @@ static bool ili251x_touchdata_to_coords(const u8 *touchdata,
 
 	*x = val & 0x3fff;
 	*y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2);
+	*z = touchdata[1 + (finger * 5) + 4];
 
 	return true;
 }
@@ -261,6 +268,7 @@ static const struct ili2xxx_chip ili251x_chip = {
 	.continue_polling	= ili251x_check_continue_polling,
 	.max_touches		= 10,
 	.has_calibrate_reg	= true,
+	.has_pressure_reg	= true,
 };
 
 static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata)
@@ -268,14 +276,16 @@ static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata)
 	struct input_dev *input = priv->input;
 	int i;
 	bool contact = false, touch;
-	unsigned int x = 0, y = 0;
+	unsigned int x = 0, y = 0, z = 0;
 
 	for (i = 0; i < priv->chip->max_touches; i++) {
-		touch = priv->chip->parse_touch_data(touchdata, i, &x, &y);
+		touch = priv->chip->parse_touch_data(touchdata, i, &x, &y, &z);
 
 		input_mt_slot(input, i);
 		if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) {
 			touchscreen_report_pos(input, &priv->prop, x, y, true);
+			if (priv->chip->has_pressure_reg)
+				input_report_abs(input, ABS_MT_PRESSURE, z);
 			contact = true;
 		}
 	}
@@ -437,6 +447,8 @@ static int ili210x_i2c_probe(struct i2c_client *client,
 	max_xy = (chip->resolution ?: SZ_64K) - 1;
 	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0);
+	if (priv->chip->has_pressure_reg)
+		input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xa, 0, 0);
 	touchscreen_parse_properties(input, true, &priv->prop);
 
 	error = input_mt_init_slots(input, priv->chip->max_touches,
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 678afac85507..4d2d22a86977 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -137,45 +137,25 @@ struct raydium_data {
 	bool wake_irq_enabled;
 };
 
-static int raydium_i2c_xfer(struct i2c_client *client,
-			    u32 addr, void *data, size_t len, bool is_read)
-{
-	struct raydium_bank_switch_header {
-		u8 cmd;
-		__be32 be_addr;
-	} __packed header = {
-		.cmd = RM_CMD_BANK_SWITCH,
-		.be_addr = cpu_to_be32(addr),
-	};
-
-	u8 reg_addr = addr & 0xff;
-
-	struct i2c_msg xfer[] = {
-		{
-			.addr = client->addr,
-			.len = sizeof(header),
-			.buf = (u8 *)&header,
-		},
-		{
-			.addr = client->addr,
-			.len = 1,
-			.buf = &reg_addr,
-		},
-		{
-			.addr = client->addr,
-			.len = len,
-			.buf = data,
-			.flags = is_read ? I2C_M_RD : 0,
-		}
-	};
+/*
+ * Header to be sent for RM_CMD_BANK_SWITCH command. This is used by
+ * raydium_i2c_{read|send} below.
+ */
+struct __packed raydium_bank_switch_header {
+	u8 cmd;
+	__be32 be_addr;
+};
 
+static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
+			    struct i2c_msg *xfer, size_t xfer_count)
+{
+	int ret;
 	/*
 	 * If address is greater than 255, then RM_CMD_BANK_SWITCH needs to be
 	 * sent first. Else, skip the header i.e. xfer[0].
 	 */
 	int xfer_start_idx = (addr > 0xff) ? 0 : 1;
-	size_t xfer_count = ARRAY_SIZE(xfer) - xfer_start_idx;
-	int ret;
+	xfer_count -= xfer_start_idx;
 
 	ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
 	if (likely(ret == xfer_count))
@@ -189,10 +169,46 @@ static int raydium_i2c_send(struct i2c_client *client,
 {
 	int tries = 0;
 	int error;
+	u8 *tx_buf;
+	u8 reg_addr = addr & 0xff;
+
+	tx_buf = kmalloc(len + 1, GFP_KERNEL);
+	if (!tx_buf)
+		return -ENOMEM;
+
+	tx_buf[0] = reg_addr;
+	memcpy(tx_buf + 1, data, len);
 
 	do {
-		error = raydium_i2c_xfer(client, addr, (void *)data, len,
-					 false);
+		struct raydium_bank_switch_header header = {
+			.cmd = RM_CMD_BANK_SWITCH,
+			.be_addr = cpu_to_be32(addr),
+		};
+
+		/*
+		 * Perform as a single i2c_transfer transaction to ensure that
+		 * no other I2C transactions are initiated on the bus to any
+		 * other device in between. Initiating transacations to other
+		 * devices after RM_CMD_BANK_SWITCH is sent is known to cause
+		 * issues. This is also why regmap infrastructure cannot be used
+		 * for this driver. Regmap handles page(bank) switch and reads
+		 * as separate i2c_transfer() operations. This can result in
+		 * problems if the Raydium device is on a shared I2C bus.
+		 */
+		struct i2c_msg xfer[] = {
+			{
+				.addr = client->addr,
+				.len = sizeof(header),
+				.buf = (u8 *)&header,
+			},
+			{
+				.addr = client->addr,
+				.len = len + 1,
+				.buf = tx_buf,
+			},
+		};
+
+		error = raydium_i2c_xfer(client, addr, xfer, ARRAY_SIZE(xfer));
 		if (likely(!error))
 			return 0;
 
@@ -206,12 +222,46 @@ static int raydium_i2c_send(struct i2c_client *client,
 static int raydium_i2c_read(struct i2c_client *client,
 			    u32 addr, void *data, size_t len)
 {
-	size_t xfer_len;
 	int error;
 
 	while (len) {
-		xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE);
-		error = raydium_i2c_xfer(client, addr, data, xfer_len, true);
+		u8 reg_addr = addr & 0xff;
+		struct raydium_bank_switch_header header = {
+			.cmd = RM_CMD_BANK_SWITCH,
+			.be_addr = cpu_to_be32(addr),
+		};
+		size_t xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE);
+
+		/*
+		 * Perform as a single i2c_transfer transaction to ensure that
+		 * no other I2C transactions are initiated on the bus to any
+		 * other device in between. Initiating transacations to other
+		 * devices after RM_CMD_BANK_SWITCH is sent is known to cause
+		 * issues. This is also why regmap infrastructure cannot be used
+		 * for this driver. Regmap handles page(bank) switch and writes
+		 * as separate i2c_transfer() operations. This can result in
+		 * problems if the Raydium device is on a shared I2C bus.
+		 */
+		struct i2c_msg xfer[] = {
+			{
+				.addr = client->addr,
+				.len = sizeof(header),
+				.buf = (u8 *)&header,
+			},
+			{
+				.addr = client->addr,
+				.len = 1,
+				.buf = &reg_addr,
+			},
+			{
+				.addr = client->addr,
+				.len = xfer_len,
+				.buf = data,
+				.flags = I2C_M_RD,
+			}
+		};
+
+		error = raydium_i2c_xfer(client, addr, xfer, ARRAY_SIZE(xfer));
 		if (unlikely(error))
 			return error;
 
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 82920ff46f72..2e70c0b79444 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -20,10 +20,43 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/adc.h>
-#include <plat/regs-adc.h>
+#include <linux/soc/samsung/s3c-adc.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 
+#define	S3C2410_ADCCON			(0x00)
+#define	S3C2410_ADCTSC			(0x04)
+#define	S3C2410_ADCDLY			(0x08)
+#define	S3C2410_ADCDAT0			(0x0C)
+#define	S3C2410_ADCDAT1			(0x10)
+#define	S3C64XX_ADCUPDN			(0x14)
+#define	S3C2443_ADCMUX			(0x18)
+#define	S3C64XX_ADCCLRINT		(0x18)
+#define	S5P_ADCMUX			(0x1C)
+#define	S3C64XX_ADCCLRINTPNDNUP		(0x20)
+
+/* ADCTSC Register Bits */
+#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
+#define S3C2410_ADCTSC_YM_SEN		(1<<7)
+#define S3C2410_ADCTSC_YP_SEN		(1<<6)
+#define S3C2410_ADCTSC_XM_SEN		(1<<5)
+#define S3C2410_ADCTSC_XP_SEN		(1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
+#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
+
+
 #define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
 
 #define INT_DOWN	(0)
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index bda96762744e..b4e7bcbe9b91 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -26,6 +26,20 @@
 #define ST1232_TS_NAME	"st1232-ts"
 #define ST1633_TS_NAME	"st1633-ts"
 
+#define REG_STATUS		0x01	/* Device Status | Error Code */
+
+#define STATUS_NORMAL		0x00
+#define STATUS_INIT		0x01
+#define STATUS_ERROR		0x02
+#define STATUS_AUTO_TUNING	0x03
+#define STATUS_IDLE		0x04
+#define STATUS_POWER_DOWN	0x05
+
+#define ERROR_NONE		0x00
+#define ERROR_INVALID_ADDRESS	0x10
+#define ERROR_INVALID_VALUE	0x20
+#define ERROR_INVALID_PLATFORM	0x30
+
 #define REG_XY_RESOLUTION	0x04
 #define REG_XY_COORDINATES	0x12
 #define ST_TS_MAX_FINGERS	10
@@ -47,7 +61,8 @@ struct st1232_ts_data {
 	u8 *read_buf;
 };
 
-static int st1232_ts_read_data(struct st1232_ts_data *ts, u8 reg)
+static int st1232_ts_read_data(struct st1232_ts_data *ts, u8 reg,
+			       unsigned int n)
 {
 	struct i2c_client *client = ts->client;
 	struct i2c_msg msg[] = {
@@ -59,7 +74,7 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts, u8 reg)
 		{
 			.addr	= client->addr,
 			.flags	= I2C_M_RD | I2C_M_DMA_SAFE,
-			.len	= ts->read_buf_len,
+			.len	= n,
 			.buf	= ts->read_buf,
 		}
 	};
@@ -72,6 +87,22 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts, u8 reg)
 	return 0;
 }
 
+static int st1232_ts_wait_ready(struct st1232_ts_data *ts)
+{
+	unsigned int retries;
+	int error;
+
+	for (retries = 10; retries; retries--) {
+		error = st1232_ts_read_data(ts, REG_STATUS, 1);
+		if (!error && ts->read_buf[0] == (STATUS_NORMAL | ERROR_NONE))
+			return 0;
+
+		usleep_range(1000, 2000);
+	}
+
+	return -ENXIO;
+}
+
 static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
 				     u16 *max_y)
 {
@@ -79,14 +110,14 @@ static int st1232_ts_read_resolution(struct st1232_ts_data *ts, u16 *max_x,
 	int error;
 
 	/* select resolution register */
-	error = st1232_ts_read_data(ts, REG_XY_RESOLUTION);
+	error = st1232_ts_read_data(ts, REG_XY_RESOLUTION, 3);
 	if (error)
 		return error;
 
 	buf = ts->read_buf;
 
-	*max_x = ((buf[0] & 0x0070) << 4) | buf[1];
-	*max_y = ((buf[0] & 0x0007) << 8) | buf[2];
+	*max_x = (((buf[0] & 0x0070) << 4) | buf[1]) - 1;
+	*max_y = (((buf[0] & 0x0007) << 8) | buf[2]) - 1;
 
 	return 0;
 }
@@ -140,7 +171,7 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 	int count;
 	int error;
 
-	error = st1232_ts_read_data(ts, REG_XY_COORDINATES);
+	error = st1232_ts_read_data(ts, REG_XY_COORDINATES, ts->read_buf_len);
 	if (error)
 		goto out;
 
@@ -251,6 +282,11 @@ static int st1232_ts_probe(struct i2c_client *client,
 	input_dev->name = "st1232-touchscreen";
 	input_dev->id.bustype = BUS_I2C;
 
+	/* Wait until device is ready */
+	error = st1232_ts_wait_ready(ts);
+	if (error)
+		return error;
+
 	/* Read resolution from the chip */
 	error = st1232_ts_read_resolution(ts, &max_x, &max_y);
 	if (error) {