summaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
authorFabian Vogt <fabian@ritter-vogt.de>2021-03-23 20:45:55 +0300
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2021-03-23 20:55:10 +0300
commit69d5ff3e9e51e23d5d81bf48480aa5671be67a71 (patch)
tree3e84fb37d612c9c26697a49e2b5e9a50db2d23e0 /drivers/input
parentdaa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 (diff)
downloadlinux-69d5ff3e9e51e23d5d81bf48480aa5671be67a71.tar.xz
Input: nspire-keypad - enable interrupts only when opened
The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/keyboard/nspire-keypad.c56
1 files changed, 31 insertions, 25 deletions
diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c
index 63d5e488137d..e9fa1423f136 100644
--- a/drivers/input/keyboard/nspire-keypad.c
+++ b/drivers/input/keyboard/nspire-keypad.c
@@ -93,9 +93,15 @@ static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
+static int nspire_keypad_open(struct input_dev *input)
{
+ struct nspire_keypad *keypad = input_get_drvdata(input);
unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+ int error;
+
+ error = clk_prepare_enable(keypad->clk);
+ if (error)
+ return error;
cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
if (cycles_per_us == 0)
@@ -121,30 +127,6 @@ static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
keypad->int_mask = 1 << 1;
writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK);
- /* Disable GPIO interrupts to prevent hanging on touchpad */
- /* Possibly used to detect touchpad events */
- writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
- /* Acknowledge existing interrupts */
- writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
-
- return 0;
-}
-
-static int nspire_keypad_open(struct input_dev *input)
-{
- struct nspire_keypad *keypad = input_get_drvdata(input);
- int error;
-
- error = clk_prepare_enable(keypad->clk);
- if (error)
- return error;
-
- error = nspire_keypad_chip_init(keypad);
- if (error) {
- clk_disable_unprepare(keypad->clk);
- return error;
- }
-
return 0;
}
@@ -152,6 +134,11 @@ static void nspire_keypad_close(struct input_dev *input)
{
struct nspire_keypad *keypad = input_get_drvdata(input);
+ /* Disable interrupts */
+ writel(0, keypad->reg_base + KEYPAD_INTMSK);
+ /* Acknowledge existing interrupts */
+ writel(~0, keypad->reg_base + KEYPAD_INT);
+
clk_disable_unprepare(keypad->clk);
}
@@ -210,6 +197,25 @@ static int nspire_keypad_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ error = clk_prepare_enable(keypad->clk);
+ if (error) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ return error;
+ }
+
+ /* Disable interrupts */
+ writel(0, keypad->reg_base + KEYPAD_INTMSK);
+ /* Acknowledge existing interrupts */
+ writel(~0, keypad->reg_base + KEYPAD_INT);
+
+ /* Disable GPIO interrupts to prevent hanging on touchpad */
+ /* Possibly used to detect touchpad events */
+ writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+ /* Acknowledge existing GPIO interrupts */
+ writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+ clk_disable_unprepare(keypad->clk);
+
input_set_drvdata(input, keypad);
input->id.bustype = BUS_HOST;