summaryrefslogtreecommitdiff
path: root/drivers/mfd/Kconfig
diff options
context:
space:
mode:
authorSamuel Ortiz <sameo@linux.intel.com>2013-04-09 16:40:09 +0400
committerSamuel Ortiz <sameo@linux.intel.com>2013-04-09 16:45:23 +0400
commitab85b120e6925203e4b63022166eacac19009380 (patch)
tree40c73e46ec27589aef044844c1ec482e6f045195 /drivers/mfd/Kconfig
parent230f13a5035fd4725a6623af83953623fd51173a (diff)
downloadlinux-ab85b120e6925203e4b63022166eacac19009380.tar.xz
mfd: Kconfig alphabetical re-ordering
Ordering so many Kconfig alphabetically makes it a lot easier to read e.g. from menuconfig. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/mfd/Kconfig')
-rw-r--r--drivers/mfd/Kconfig1357
1 files changed, 680 insertions, 677 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9d64e321e8c0..2f3ce1836181 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -10,19 +10,45 @@ config MFD_CORE
select IRQ_DOMAIN
default n
-config MFD_88PM860X
- bool "Support Marvell 88PM8606/88PM8607"
- depends on I2C=y && GENERIC_HARDIRQS
+config MFD_CS5535
+ tristate "AMD CS5535 and CS5536 southbridge core functions"
+ select MFD_CORE
+ depends on PCI && X86
+ ---help---
+ This is the core driver for CS5535/CS5536 MFD functions. This is
+ necessary for using the board's GPIO and MFGPT functionality.
+
+config MFD_AS3711
+ bool "AMS AS3711"
+ select MFD_CORE
select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Support for the AS3711 PMIC from AMS
+
+config PMIC_ADP5520
+ bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
+ depends on I2C=y
+ help
+ Say yes here to add support for Analog Devices AD5520 and ADP5501,
+ Multifunction Power Management IC. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, LEDs, GPIOs and Kepad
+ under the corresponding menus.
+
+config MFD_AAT2870_CORE
+ bool "AnalogicTech AAT2870"
select MFD_CORE
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
help
- This supports for Marvell 88PM8606/88PM8607 Power Management IC.
- This includes the I2C driver and the core APIs _only_, you have to
- select individual components like voltage regulators, RTC and
- battery-charger under the corresponding menus.
+ If you say yes here you get support for the AAT2870.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
config MFD_CROS_EC
- tristate "Support ChromeOS Embedded Controller"
+ tristate "ChromeOS Embedded Controller"
select MFD_CORE
help
If you say Y here you get support for the ChromeOS Embedded
@@ -50,8 +76,174 @@ config MFD_CROS_EC_SPI
response time cannot be guaranteed, we support ignoring
'pre-amble' bytes before the response actually starts.
+config MFD_ASIC3
+ bool "Compaq ASIC3"
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ select MFD_CORE
+ ---help---
+ This driver supports the ASIC3 multifunction chip found on many
+ PDAs (mainly iPAQ and HTC based ones)
+
+config PMIC_DA903X
+ bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
+ depends on I2C=y
+ help
+ Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
+ usually found on PXA processors-based platforms. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, voltage regulators,
+ LEDs and battery-charger under the corresponding menus.
+
+config PMIC_DA9052
+ bool
+ select MFD_CORE
+
+config MFD_DA9052_SPI
+ bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
+ select REGMAP_SPI
+ select REGMAP_IRQ
+ select PMIC_DA9052
+ depends on SPI_MASTER=y && GENERIC_HARDIRQS
+ help
+ Support for the Dialog Semiconductor DA9052 PMIC
+ when controlled using SPI. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
+
+config MFD_DA9052_I2C
+ bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select PMIC_DA9052
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Support for the Dialog Semiconductor DA9052 PMIC
+ when controlled using I2C. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
+
+config MFD_DA9055
+ bool "Dialog Semiconductor DA9055 PMIC Support"
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Say yes here for support of Dialog Semiconductor DA9055. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device as well as the I2C interface to the chip itself.
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
+ This driver can be built as a module. If built as a module it will be
+ called "da9055"
+
+config MFD_MC13783
+ tristate
+
+config MFD_MC13XXX
+ tristate
+ depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+ select MFD_CORE
+ select MFD_MC13783
+ help
+ Enable support for the Freescale MC13783 and MC13892 PMICs.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config MFD_MC13XXX_SPI
+ tristate "Freescale MC13783 and MC13892 SPI interface"
+ depends on SPI_MASTER && GENERIC_HARDIRQS
+ select REGMAP_SPI
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+ tristate "Freescale MC13892 I2C interface"
+ depends on I2C && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an I2C bus.
+
+config HTC_EGPIO
+ bool "HTC EGPIO support"
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ help
+ This driver supports the CPLD egpio chip present on
+ several HTC phones. It provides basic support for input
+ pins, output pins, and irqs.
+
+config HTC_PASIC3
+ tristate "HTC PASIC3 LED/DS1WM chip support"
+ select MFD_CORE
+ depends on GENERIC_HARDIRQS
+ help
+ This core driver provides register access for the LED/DS1WM
+ chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
+ HTC Magician devices, respectively. Actual functionality is
+ handled by the leds-pasic3 and ds1wm drivers.
+
+config HTC_I2CPLD
+ bool "HTC I2C PLD chip support"
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the supposed CPLD
+ found on omap850 HTC devices like the HTC Wizard and HTC Herald.
+ This device provides input and output GPIOs through an I2C
+ interface to one or more sub-chips.
+
+config LPC_ICH
+ tristate "Intel ICH LPC"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ The LPC bridge function of the Intel ICH provides support for
+ many functional units. This driver provides needed support for
+ other drivers to control these functions, currently GPIO and
+ watchdog.
+
+config LPC_SCH
+ tristate "Intel SCH LPC"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ LPC bridge function of the Intel SCH provides support for
+ System Management Bus and General Purpose I/O.
+
+config MFD_INTEL_MSIC
+ bool "Intel MSIC"
+ depends on INTEL_SCU_IPC
+ select MFD_CORE
+ help
+ Select this option to enable access to Intel MSIC (Avatele
+ Passage) chip. This chip embeds audio, battery, GPIO, etc.
+ devices used in Intel Medfield platforms.
+
+config MFD_JANZ_CMODIO
+ tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
+ select MFD_CORE
+ depends on PCI && GENERIC_HARDIRQS
+ help
+ This is the core driver for the Janz CMOD-IO PCI MODULbus
+ carrier board. This device is a PCI to MODULbus bridge which may
+ host many different types of MODULbus daughterboards, including
+ CAN and GPIO controllers.
+
+config MFD_JZ4740_ADC
+ bool "Janz JZ4740 ADC core"
+ select MFD_CORE
+ select GENERIC_IRQ_CHIP
+ depends on MACH_JZ4740
+ help
+ Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+ This driver is necessary for jz4740-battery and jz4740-hwmon driver.
+
config MFD_88PM800
- tristate "Support Marvell 88PM800"
+ tristate "Marvell 88PM800"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
@@ -63,7 +255,7 @@ config MFD_88PM800
battery-charger under the corresponding menus.
config MFD_88PM805
- tristate "Support Marvell 88PM805"
+ tristate "Marvell 88PM805"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
@@ -74,8 +266,229 @@ config MFD_88PM805
components like codec device, headset/Mic device under the
corresponding menus.
+config MFD_88PM860X
+ bool "Marvell 88PM8606/88PM8607"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select MFD_CORE
+ help
+ This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+ This includes the I2C driver and the core APIs _only_, you have to
+ select individual components like voltage regulators, RTC and
+ battery-charger under the corresponding menus.
+
+config MFD_MAX77686
+ bool "Maxim Semiconductor MAX77686 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to support for Maxim Semiconductor MAX77686.
+ This is a Power Management IC with RTC on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config MFD_MAX77693
+ bool "Maxim Semiconductor MAX77693 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to support for Maxim Semiconductor MAX77693.
+ This is a companion Power Management IC with Flash, Haptic, Charger,
+ and MUIC(Micro USB Interface Controller) controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config MFD_MAX8907
+ tristate "Maxim Semiconductor MAX8907 PMIC Support"
+ select MFD_CORE
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Say yes here to support for Maxim Semiconductor MAX8907. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device; additional drivers must be enabled in order
+ to use the functionality of the device.
+
+config MFD_MAX8925
+ bool "Maxim Semiconductor MAX8925 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX8925. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device, additional drivers must be enabled in order
+ to use the functionality of the device.
+
+config MFD_MAX8997
+ bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select IRQ_DOMAIN
+ help
+ Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
+ MUIC controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config MFD_MAX8998
+ bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX8998 and
+ National Semiconductor LP3974. This is a Power Management IC.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config EZX_PCAP
+ bool "Motorola EZXPCAP Support"
+ depends on GENERIC_HARDIRQS && SPI_MASTER
+ help
+ This enables the PCAP ASIC present on EZX Phones. This is
+ needed for MMC, TouchScreen, Sound, USB, etc..
+
+config MFD_VIPERBOARD
+ tristate "Nano River Technologies Viperboard"
+ select MFD_CORE
+ depends on USB && GENERIC_HARDIRQS
+ default n
+ help
+ Say yes here if you want support for Nano River Technologies
+ Viperboard.
+ There are mfd cell drivers available for i2c master, adc and
+ both gpios found on the board. The spi part does not yet
+ have a driver.
+ You need to select the mfd cell drivers separately.
+ The drivers do not support all features the board exposes.
+
+config MFD_RETU
+ tristate "Nokia Retu multi-function device"
+ select MFD_CORE
+ depends on I2C && GENERIC_HARDIRQS
+ select REGMAP_IRQ
+ help
+ Retu is a multi-function device found on Nokia Internet Tablets
+ (770, N800 and N810).
+
+config MFD_PCF50633
+ tristate "NXP PCF50633"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+config PCF50633_ADC
+ tristate "NXP PCF50633 ADC"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
+
+config PCF50633_GPIO
+ tristate "NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
+
+config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ depends on AC97_BUS
+ depends on GPIOLIB
+ help
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
+
+config MFD_PM8XXX
+ tristate
+
+config MFD_PM8921_CORE
+ tristate "Qualcomm PM8921 PMIC chip"
+ depends on MSM_SSBI
+ select MFD_CORE
+ select MFD_PM8XXX
+ help
+ If you say yes to this option, support will be included for the
+ built-in PM8921 PMIC chip.
+
+ This is required if your board has a PM8921 and uses its features,
+ such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+
+ Say M here if you want to include support for PM8921 chip as a module.
+ This will build a module called "pm8921-core".
+
+config MFD_PM8XXX_IRQ
+ bool "Qualcomm PM8xxx IRQ features"
+ depends on MFD_PM8XXX
+ default y if MFD_PM8XXX
+ help
+ This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+
+ This is required to use certain other PM 8xxx features, such as GPIO
+ and MPP.
+
+config MFD_RDC321X
+ tristate "RDC R-321x southbridge"
+ select MFD_CORE
+ depends on PCI && GENERIC_HARDIRQS
+ help
+ Say yes here if you want to have support for the RDC R-321x SoC
+ southbridge which provides access to GPIOs and Watchdog using the
+ southbridge PCI device configuration space.
+
+config MFD_RTSX_PCI
+ tristate "Realtek PCI-E card reader"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ This supports for Realtek PCI-Express card reader including rts5209,
+ rts5229, rtl8411, etc. Realtek card reader supports access to many
+ types of memory cards, such as Memory Stick, Memory Stick Pro,
+ Secure Digital and MultiMediaCard.
+
+config MFD_RC5T583
+ bool "Ricoh RC5T583 Power Management system device"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Select this option to get support for the RICOH583 Power
+ Management system device.
+ This driver provides common support for accessing the device
+ through i2c interface. The device supports multiple sub-devices
+ like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+ Additional drivers must be enabled in order to use the
+ different functionality of the device.
+
+config MFD_SEC_CORE
+ bool "SAMSUNG Electronics PMIC Series Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Support for the Samsung Electronics MFD series.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device
+
config MFD_SM501
- tristate "Support for Silicon Motion SM501"
+ tristate "Silicon Motion SM501"
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
@@ -92,46 +505,147 @@ config MFD_SM501_GPIO
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
-config MFD_RTSX_PCI
- tristate "Support for Realtek PCI-E card reader"
- depends on PCI && GENERIC_HARDIRQS
+config MFD_SMSC
+ bool "SMSC ECE1099 series chips"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the
+ ece1099 chips from SMSC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc.
+
+config ABX500_CORE
+ bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+ default y if ARCH_U300 || ARCH_U8500
+ help
+ Say yes here if you have the ABX500 Mixed Signal IC family
+ chips. This core driver expose register access functions.
+ Functionality specific drivers using these functions can
+ remain unchanged when IC changes. Binding of the functions to
+ actual register access is done by the IC core driver.
+
+config AB3100_CORE
+ bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+ depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
select MFD_CORE
+ default y if ARCH_U300
help
- This supports for Realtek PCI-Express card reader including rts5209,
- rts5229, rtl8411, etc. Realtek card reader supports access to many
- types of memory cards, such as Memory Stick, Memory Stick Pro,
- Secure Digital and MultiMediaCard.
+ Select this to enable the AB3100 Mixed Signal IC core
+ functionality. This connects to a AB3100 on the I2C bus
+ and expose a number of symbols needed for dependent devices
+ to read and write registers and subscribe to events from
+ this multi-functional IC. This is needed to use other features
+ of the AB3100 such as battery-backed RTC, charging control,
+ LEDs, vibrator, system power and temperature, power management
+ and ALSA sound.
-config MFD_ASIC3
- bool "Support for Compaq ASIC3"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+config AB3100_OTP
+ tristate "ST-Ericsson AB3100 OTP functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+ programmable memory) support. This exposes a sysfs file to read
+ out OTP values.
+
+config AB8500_CORE
+ bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
+ depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ select POWER_SUPPLY
select MFD_CORE
- ---help---
- This driver supports the ASIC3 multifunction chip found on many
- PDAs (mainly iPAQ and HTC based ones)
+ select IRQ_DOMAIN
+ help
+ Select this option to enable access to AB8500 power management
+ chip. This connects to U8500 either on the SSP/SPI bus (deprecated
+ since hardware version v1.0) or the I2C bus via PRCMU. It also adds
+ the irq_chip parts for handling the Mixed Signal chip events.
+ This chip embeds various other multimedia funtionalities as well.
-config MFD_DAVINCI_VOICECODEC
- tristate
+config AB8500_DEBUG
+ bool "Enable debug info via debugfs"
+ depends on AB8500_CORE && DEBUG_FS
+ default y if DEBUG_FS
+ help
+ Select this option if you want debug information using the debug
+ filesystem, debugfs.
+
+config AB8500_GPADC
+ bool "ST-Ericsson AB8500 GPADC driver"
+ depends on AB8500_CORE && REGULATOR_AB8500
+ default y
+ help
+ AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
+
+config MFD_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB8500
select MFD_CORE
+ help
+ Select this option to enable support for the DB8500 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
-config MFD_DM355EVM_MSP
- bool "DaVinci DM355 EVM microcontroller"
- depends on I2C=y && MACH_DAVINCI_DM355_EVM
+config MFD_STMPE
+ bool "STMicroelectronics STMPE"
+ depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+ select MFD_CORE
help
- This driver supports the MSP430 microcontroller used on these
- boards. MSP430 firmware manages resets and power sequencing,
- inputs from buttons and the IR remote, LEDs, an RTC, and more.
+ Support for the STMPE family of I/O Expanders from
+ STMicroelectronics.
-config MFD_TI_SSP
- tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ Currently supported devices are:
+
+ STMPE811: GPIO, Touchscreen
+ STMPE1601: GPIO, Keypad
+ STMPE1801: GPIO, Keypad
+ STMPE2401: GPIO, Keypad
+ STMPE2403: GPIO, Keypad
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device. Currently available sub drivers are:
+
+ GPIO: stmpe-gpio
+ Keypad: stmpe-keypad
+ Touchscreen: stmpe-ts
+
+menu "STMicroelectronics STMPE Interface Drivers"
+depends on MFD_STMPE
+
+config STMPE_I2C
+ bool "STMicroelectronics STMPE I2C Inteface"
+ depends on I2C=y
+ default y
+ help
+ This is used to enable I2C interface of STMPE
+
+config STMPE_SPI
+ bool "STMicroelectronics STMPE SPI Inteface"
+ depends on SPI_MASTER
+ help
+ This is used to enable SPI interface of STMPE
+endmenu
+
+config MFD_STA2X11
+ bool "STMicroelectronics STA2X11"
+ depends on STA2X11 && GENERIC_HARDIRQS
select MFD_CORE
- ---help---
- Say Y here if you want support for the Sequencer Serial Port
- in a Texas Instruments TNETV107X SoC.
+ select REGMAP_MMIO
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp.
+config MFD_SYSCON
+ bool "System Controller Register R/W Based on Regmap"
+ select REGMAP_MMIO
+ help
+ Select this option to enable accessing system control registers
+ via regmap.
+
+config MFD_DAVINCI_VOICECODEC
+ tristate
+ select MFD_CORE
config MFD_TI_AM335X_TSCADC
tristate "TI ADC / Touch Screen chip support"
@@ -145,60 +659,56 @@ config MFD_TI_AM335X_TSCADC
To compile this driver as a module, choose M here: the
module will be called ti_am335x_tscadc.
-config HTC_EGPIO
- bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+config MFD_DM355EVM_MSP
+ bool "TI DaVinci DM355 EVM microcontroller"
+ depends on I2C=y && MACH_DAVINCI_DM355_EVM
help
- This driver supports the CPLD egpio chip present on
- several HTC phones. It provides basic support for input
- pins, output pins, and irqs.
+ This driver supports the MSP430 microcontroller used on these
+ boards. MSP430 firmware manages resets and power sequencing,
+ inputs from buttons and the IR remote, LEDs, an RTC, and more.
-config HTC_PASIC3
- tristate "HTC PASIC3 LED/DS1WM chip support"
+config MFD_LP8788
+ bool "TI LP8788 Power Management Unit Driver"
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
- depends on GENERIC_HARDIRQS
- help
- This core driver provides register access for the LED/DS1WM
- chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
- HTC Magician devices, respectively. Actual functionality is
- handled by the leds-pasic3 and ds1wm drivers.
-
-config HTC_I2CPLD
- bool "HTC I2C PLD chip support"
- depends on I2C=y && GPIOLIB
+ select REGMAP_I2C
+ select IRQ_DOMAIN
help
- If you say yes here you get support for the supposed CPLD
- found on omap850 HTC devices like the HTC Wizard and HTC Herald.
- This device provides input and output GPIOs through an I2C
- interface to one or more sub-chips.
+ TI LP8788 PMU supports regulators, battery charger, RTC,
+ ADC, backlight driver and current sinks.
-config UCB1400_CORE
- tristate "Philips UCB1400 Core driver"
- depends on AC97_BUS
- depends on GPIOLIB
+config MFD_OMAP_USB_HOST
+ bool "TI OMAP USBHS core and TLL driver"
+ depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+ default y
help
- This enables support for the Philips UCB1400 core functions.
- The UCB1400 is an AC97 audio codec.
-
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_core.
+ This is the core driver for the OAMP EHCI and OHCI drivers.
+ This MFD driver does the required setup functionalities for
+ OMAP USB Host drivers.
-config MFD_LM3533
- tristate "LM3533 Lighting Power chip"
- depends on I2C
+config MFD_PALMAS
+ bool "TI Palmas series chips"
select MFD_CORE
select REGMAP_I2C
- depends on GENERIC_HARDIRQS
+ select REGMAP_IRQ
+ depends on I2C=y && GENERIC_HARDIRQS
help
- Say yes here to enable support for National Semiconductor / TI
- LM3533 Lighting Power chips.
+ If you say yes here you get support for the Palmas
+ series of PMIC chips from Texas Instruments.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the LED,
- backlight or ambient-light-sensor functionality of the device.
+config MFD_TI_SSP
+ tristate "TI Sequencer Serial Port support"
+ depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ select MFD_CORE
+ ---help---
+ Say Y here if you want support for the Sequencer Serial Port
+ in a Texas Instruments TNETV107X SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti-ssp.
config TPS6105X
- tristate "TPS61050/61052 Boost Converters"
+ tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
select REGULATOR
select MFD_CORE
@@ -211,7 +721,7 @@ config TPS6105X
also contains a GPIO pin.
config TPS65010
- tristate "TPS6501x Power Management chips"
+ tristate "TI TPS6501x Power Management chips"
depends on I2C && GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
@@ -224,7 +734,7 @@ config TPS65010
will be called tps65010.
config TPS6507X
- tristate "TPS6507x Power Management / Touch Screen chips"
+ tristate "TI TPS6507x Power Management / Touch Screen chips"
select MFD_CORE
depends on I2C && GENERIC_HARDIRQS
help
@@ -235,8 +745,24 @@ config TPS6507X
This driver can also be built as a module. If so, the module
will be called tps6507x.
+config TPS65911_COMPARATOR
+ tristate
+
+config MFD_TPS65090
+ bool "TI TPS65090 Power Management chips"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ If you say yes here you get support for the TPS65090 series of
+ Power Management chips.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_TPS65217
- tristate "TPS65217 Power Management / White LED chips"
+ tristate "TI TPS65217 Power Management / White LED chips"
depends on I2C && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -251,7 +777,7 @@ config MFD_TPS65217
will be called tps65217.
config MFD_TPS6586X
- bool "TPS6586x Power Management chips"
+ bool "TI TPS6586x Power Management chips"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -266,7 +792,7 @@ config MFD_TPS6586X
will be called tps6586x.
config MFD_TPS65910
- bool "TPS65910 Power Management chip"
+ bool "TI TPS65910 Power Management chip"
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -277,11 +803,14 @@ config MFD_TPS65910
Power Management chips.
config MFD_TPS65912
- bool
+ bool "TI TPS65912 Power Management chip"
depends on GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips.
config MFD_TPS65912_I2C
- bool "TPS65912 Power Management chip with I2C"
+ bool "TI TPS65912 Power Management chip with I2C"
select MFD_CORE
select MFD_TPS65912
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
@@ -290,7 +819,7 @@ config MFD_TPS65912_I2C
PM chips with I2C interface.
config MFD_TPS65912_SPI
- bool "TPS65912 Power Management chip with SPI"
+ bool "TI TPS65912 Power Management chip with SPI"
select MFD_CORE
select MFD_TPS65912
depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
@@ -312,18 +841,8 @@ config MFD_TPS80031
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.
-config MENELAUS
- bool "Texas Instruments TWL92330/Menelaus PM chip"
- depends on I2C=y && ARCH_OMAP2
- help
- If you say yes here you get support for the Texas Instruments
- TWL92330/Menelaus Power Management chip. This include voltage
- regulators, Dual slot memory card transceivers, real-time clock
- and other features that are often used in portable devices like
- cell phones and PDAs.
-
config TWL4030_CORE
- bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
+ bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
select IRQ_DOMAIN
select REGMAP_I2C
@@ -339,7 +858,7 @@ config TWL4030_CORE
versions) and many other features.
config TWL4030_MADC
- tristate "Texas Instruments TWL4030 MADC"
+ tristate "TI TWL4030 MADC"
depends on TWL4030_CORE
help
This driver provides support for triton TWL4030-MADC. The
@@ -349,7 +868,7 @@ config TWL4030_MADC
named twl4030-madc
config TWL4030_POWER
- bool "Support power resources on TWL4030 family chips"
+ bool "TI TWL4030 power resources"
depends on TWL4030_CORE && ARM
help
Say yes here if you want to use the power resources on the
@@ -362,13 +881,13 @@ config TWL4030_POWER
or reset when a sleep, wakeup or warm reset event occurs.
config MFD_TWL4030_AUDIO
- bool
+ bool "TI TWL4030 Audio"
depends on TWL4030_CORE && GENERIC_HARDIRQS
select MFD_CORE
default n
config TWL6040_CORE
- bool "Support for TWL6040 audio codec"
+ bool "TI TWL6040 audio codec"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -381,49 +900,53 @@ config TWL6040_CORE
additional drivers must be enabled in order to use the
functionality of the device (audio, vibra).
-config MFD_STMPE
- bool "Support STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
- select MFD_CORE
+config MENELAUS
+ bool "TI TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP2
help
- Support for the STMPE family of I/O Expanders from
- STMicroelectronics.
-
- Currently supported devices are:
-
- STMPE811: GPIO, Touchscreen
- STMPE1601: GPIO, Keypad
- STMPE1801: GPIO, Keypad
- STMPE2401: GPIO, Keypad
- STMPE2403: GPIO, Keypad
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card transceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device. Currently available sub drivers are:
+config MFD_WL1273_CORE
+ tristate "TI WL1273 FM radio"
+ depends on I2C && GENERIC_HARDIRQS
+ select MFD_CORE
+ default n
+ help
+ This is the core driver for the TI WL1273 FM radio. This MFD
+ driver connects the radio-wl1273 V4L2 module and the wl1273
+ audio codec.
- GPIO: stmpe-gpio
- Keypad: stmpe-keypad
- Touchscreen: stmpe-ts
+config MFD_LM3533
+ tristate "TI/National Semiconductor LM3533 Lighting Power chip"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on GENERIC_HARDIRQS
+ help
+ Say yes here to enable support for National Semiconductor / TI
+ LM3533 Lighting Power chips.
-menu "STMPE Interface Drivers"
-depends on MFD_STMPE
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the LED,
+ backlight or ambient-light-sensor functionality of the device.
-config STMPE_I2C
- bool "STMPE I2C Inteface"
- depends on I2C=y
- default y
- help
- This is used to enable I2C interface of STMPE
+config MFD_TIMBERDALE
+ tristate "Timberdale FPGA"
+ select MFD_CORE
+ depends on PCI && GPIOLIB
+ ---help---
+ This is the core driver for the timberdale FPGA. This device is a
+ multifunction device which exposes numerous platform devices.
-config STMPE_SPI
- bool "STMPE SPI Inteface"
- depends on SPI_MASTER
- help
- This is used to enable SPI interface of STMPE
-endmenu
+ The timberdale FPGA can be found on the Intel Atom development board
+ for in-vehicle infontainment, called Russellville.
config MFD_TC3589X
- bool "Support Toshiba TC35892 and variants"
+ bool "Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
@@ -438,27 +961,15 @@ config MFD_TMIO
default n
config MFD_T7L66XB
- bool "Support Toshiba T7L66XB"
+ bool "Toshiba T7L66XB"
depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller T7L66XB
-config MFD_SMSC
- bool "Support for the SMSC ECE1099 series chips"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- If you say yes here you get support for the
- ece1099 chips from SMSC.
-
- To compile this driver as a module, choose M here: the
- module will be called smsc.
-
config MFD_TC6387XB
- bool "Support Toshiba TC6387XB"
+ bool "Toshiba TC6387XB"
depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
@@ -466,7 +977,7 @@ config MFD_TC6387XB
Support for Toshiba Mobile IO Controller TC6387XB
config MFD_TC6393XB
- bool "Support Toshiba TC6393XB"
+ bool "Toshiba TC6393XB"
depends on ARM && HAVE_CLK
select GPIOLIB
select MFD_CORE
@@ -474,164 +985,14 @@ config MFD_TC6393XB
help
Support for Toshiba Mobile IO Controller TC6393XB
-config PMIC_DA903X
- bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
- depends on I2C=y
- help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
- ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
- usually found on PXA processors-based platforms. This includes
- the I2C driver and the core APIs _only_, you have to select
- individual components like LCD backlight, voltage regulators,
- LEDs and battery-charger under the corresponding menus.
-
-config PMIC_DA9052
- bool
- select MFD_CORE
-
-config MFD_DA9052_SPI
- bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
- select REGMAP_SPI
- select REGMAP_IRQ
- select PMIC_DA9052
- depends on SPI_MASTER=y && GENERIC_HARDIRQS
- help
- Support for the Dialog Semiconductor DA9052 PMIC
- when controlled using SPI. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
-
-config MFD_DA9052_I2C
- bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
- select REGMAP_I2C
- select REGMAP_IRQ
- select PMIC_DA9052
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Support for the Dialog Semiconductor DA9052 PMIC
- when controlled using I2C. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
-
-config MFD_DA9055
- bool "Dialog Semiconductor DA9055 PMIC Support"
- select REGMAP_I2C
- select REGMAP_IRQ
- select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Say yes here for support of Dialog Semiconductor DA9055. This is
- a Power Management IC. This driver provides common support for
- accessing the device as well as the I2C interface to the chip itself.
- Additional drivers must be enabled in order to use the functionality
- of the device.
-
- This driver can be built as a module. If built as a module it will be
- called "da9055"
-
-config PMIC_ADP5520
- bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
- depends on I2C=y
- help
- Say yes here to add support for Analog Devices AD5520 and ADP5501,
- Multifunction Power Management IC. This includes
- the I2C driver and the core APIs _only_, you have to select
- individual components like LCD backlight, LEDs, GPIOs and Kepad
- under the corresponding menus.
-
-config MFD_LP8788
- bool "Texas Instruments LP8788 Power Management Unit Driver"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- select IRQ_DOMAIN
- help
- TI LP8788 PMU supports regulators, battery charger, RTC,
- ADC, backlight driver and current sinks.
-
-config MFD_MAX77686
- bool "Maxim Semiconductor MAX77686 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- select IRQ_DOMAIN
- help
- Say yes here to support for Maxim Semiconductor MAX77686.
- This is a Power Management IC with RTC on chip.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_MAX77693
- bool "Maxim Semiconductor MAX77693 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- Say yes here to support for Maxim Semiconductor MAX77693.
- This is a companion Power Management IC with Flash, Haptic, Charger,
- and MUIC(Micro USB Interface Controller) controls on chip.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_MAX8907
- tristate "Maxim Semiconductor MAX8907 PMIC Support"
- select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
- select REGMAP_I2C
- select REGMAP_IRQ
- help
- Say yes here to support for Maxim Semiconductor MAX8907. This is
- a Power Management IC. This driver provides common support for
- accessing the device; additional drivers must be enabled in order
- to use the functionality of the device.
-
-config MFD_MAX8925
- bool "Maxim Semiconductor MAX8925 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Say yes here to support for Maxim Semiconductor MAX8925. This is
- a Power Management IC. This driver provides common support for
- accessing the device, additional drivers must be enabled in order
- to use the functionality of the device.
-
-config MFD_MAX8997
- bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select IRQ_DOMAIN
- help
- Say yes here to support for Maxim Semiconductor MAX8997/8966.
- This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
- MUIC controls on chip.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_MAX8998
- bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Say yes here to support for Maxim Semiconductor MAX8998 and
- National Semiconductor LP3974. This is a Power Management IC.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_SEC_CORE
- bool "SAMSUNG Electronics PMIC Series Support"
- depends on I2C=y && GENERIC_HARDIRQS
+config MFD_VX855
+ tristate "VIA VX855/VX875 integrated south bridge"
+ depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
help
- Support for the Samsung Electronics MFD series.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device
+ Say yes here to enable support for various functions of the
+ VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
+ and/or vx855_gpio drivers for this to do anything useful.
config MFD_ARIZONA
select REGMAP
@@ -640,7 +1001,7 @@ config MFD_ARIZONA
bool
config MFD_ARIZONA_I2C
- tristate "Support Wolfson Microelectronics Arizona platform with I2C"
+ tristate "Wolfson Microelectronics Arizona platform with I2C"
select MFD_ARIZONA
select MFD_CORE
select REGMAP_I2C
@@ -650,7 +1011,7 @@ config MFD_ARIZONA_I2C
core functionality controlled via I2C.
config MFD_ARIZONA_SPI
- tristate "Support Wolfson Microelectronics Arizona platform with SPI"
+ tristate "Wolfson Microelectronics Arizona platform with SPI"
select MFD_ARIZONA
select MFD_CORE
select REGMAP_SPI
@@ -660,19 +1021,19 @@ config MFD_ARIZONA_SPI
core functionality controlled via I2C.
config MFD_WM5102
- bool "Support Wolfson Microelectronics WM5102"
+ bool "Wolfson Microelectronics WM5102"
depends on MFD_ARIZONA
help
Support for Wolfson Microelectronics WM5102 low power audio SoC
config MFD_WM5110
- bool "Support Wolfson Microelectronics WM5110"
+ bool "Wolfson Microelectronics WM5110"
depends on MFD_ARIZONA
help
Support for Wolfson Microelectronics WM5110 low power audio SoC
config MFD_WM8400
- bool "Support Wolfson Microelectronics WM8400"
+ bool "Wolfson Microelectronics WM8400"
select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
@@ -687,7 +1048,7 @@ config MFD_WM831X
depends on GENERIC_HARDIRQS
config MFD_WM831X_I2C
- bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
+ bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
select MFD_CORE
select MFD_WM831X
select REGMAP_I2C
@@ -700,7 +1061,7 @@ config MFD_WM831X_I2C
order to use the functionality of the device.
config MFD_WM831X_SPI
- bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
+ bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
select MFD_CORE
select MFD_WM831X
select REGMAP_SPI
@@ -717,7 +1078,7 @@ config MFD_WM8350
depends on GENERIC_HARDIRQS
config MFD_WM8350_I2C
- bool "Support Wolfson Microelectronics WM8350 with I2C"
+ bool "Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
depends on I2C=y && GENERIC_HARDIRQS
help
@@ -728,7 +1089,7 @@ config MFD_WM8350_I2C
selected to enable support for the functionality of the chip.
config MFD_WM8994
- bool "Support Wolfson Microelectronics WM8994"
+ bool "Wolfson Microelectronics WM8994"
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -741,364 +1102,6 @@ config MFD_WM8994
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.
-config MFD_PCF50633
- tristate "Support for NXP PCF50633"
- depends on I2C
- select REGMAP_I2C
- help
- Say yes here if you have NXP PCF50633 chip on your board.
- This core driver provides register access and IRQ handling
- facilities, and registers devices for the various functions
- so that function-specific drivers can bind to them.
-
-config PCF50633_ADC
- tristate "Support for NXP PCF50633 ADC"
- depends on MFD_PCF50633
- help
- Say yes here if you want to include support for ADC in the
- NXP PCF50633 chip.
-
-config PCF50633_GPIO
- tristate "Support for NXP PCF50633 GPIO"
- depends on MFD_PCF50633
- help
- Say yes here if you want to include support GPIO for pins on
- the PCF50633 chip.
-
-config MFD_MC13783
- tristate
-
-config MFD_MC13XXX
- tristate
- depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
- select MFD_CORE
- select MFD_MC13783
- help
- Enable support for the Freescale MC13783 and MC13892 PMICs.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_MC13XXX_SPI
- tristate "Freescale MC13783 and MC13892 SPI interface"
- depends on SPI_MASTER && GENERIC_HARDIRQS
- select REGMAP_SPI
- select MFD_MC13XXX
- help
- Select this if your MC13xxx is connected via an SPI bus.
-
-config MFD_MC13XXX_I2C
- tristate "Freescale MC13892 I2C interface"
- depends on I2C && GENERIC_HARDIRQS
- select REGMAP_I2C
- select MFD_MC13XXX
- help
- Select this if your MC13xxx is connected via an I2C bus.
-
-config ABX500_CORE
- bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
- default y if ARCH_U300 || ARCH_U8500
- help
- Say yes here if you have the ABX500 Mixed Signal IC family
- chips. This core driver expose register access functions.
- Functionality specific drivers using these functions can
- remain unchanged when IC changes. Binding of the functions to
- actual register access is done by the IC core driver.
-
-config AB3100_CORE
- bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
- select MFD_CORE
- default y if ARCH_U300
- help
- Select this to enable the AB3100 Mixed Signal IC core
- functionality. This connects to a AB3100 on the I2C bus
- and expose a number of symbols needed for dependent devices
- to read and write registers and subscribe to events from
- this multi-functional IC. This is needed to use other features
- of the AB3100 such as battery-backed RTC, charging control,
- LEDs, vibrator, system power and temperature, power management
- and ALSA sound.
-
-config AB3100_OTP
- tristate "ST-Ericsson AB3100 OTP functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- Select this to enable the AB3100 Mixed Signal IC OTP (one-time
- programmable memory) support. This exposes a sysfs file to read
- out OTP values.
-
-config AB8500_CORE
- bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
- select POWER_SUPPLY
- select MFD_CORE
- select IRQ_DOMAIN
- help
- Select this option to enable access to AB8500 power management
- chip. This connects to U8500 either on the SSP/SPI bus (deprecated
- since hardware version v1.0) or the I2C bus via PRCMU. It also adds
- the irq_chip parts for handling the Mixed Signal chip events.
- This chip embeds various other multimedia funtionalities as well.
-
-config AB8500_DEBUG
- bool "Enable debug info via debugfs"
- depends on AB8500_CORE && DEBUG_FS
- default y if DEBUG_FS
- help
- Select this option if you want debug information using the debug
- filesystem, debugfs.
-
-config AB8500_GPADC
- bool "AB8500 GPADC driver"
- depends on AB8500_CORE && REGULATOR_AB8500
- default y
- help
- AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-
-config EZX_PCAP
- bool "PCAP Support"
- depends on GENERIC_HARDIRQS && SPI_MASTER
- help
- This enables the PCAP ASIC present on EZX Phones. This is
- needed for MMC, TouchScreen, Sound, USB, etc..
-
-config MFD_DB8500_PRCMU
- bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
- depends on UX500_SOC_DB8500
- select MFD_CORE
- help
- Select this option to enable support for the DB8500 Power Reset
- and Control Management Unit. This is basically an autonomous
- system controller running an XP70 microprocessor, which is accessed
- through a register map.
-
-config MFD_CS5535
- tristate "Support for CS5535 and CS5536 southbridge core functions"
- select MFD_CORE
- depends on PCI && X86
- ---help---
- This is the core driver for CS5535/CS5536 MFD functions. This is
- necessary for using the board's GPIO and MFGPT functionality.
-
-config MFD_TIMBERDALE
- tristate "Support for the Timberdale FPGA"
- select MFD_CORE
- depends on PCI && GPIOLIB
- ---help---
- This is the core driver for the timberdale FPGA. This device is a
- multifunction device which exposes numerous platform devices.
-
- The timberdale FPGA can be found on the Intel Atom development board
- for in-vehicle infontainment, called Russellville.
-
-config LPC_SCH
- tristate "Intel SCH LPC"
- depends on PCI && GENERIC_HARDIRQS
- select MFD_CORE
- help
- LPC bridge function of the Intel SCH provides support for
- System Management Bus and General Purpose I/O.
-
-config LPC_ICH
- tristate "Intel ICH LPC"
- depends on PCI && GENERIC_HARDIRQS
- select MFD_CORE
- help
- The LPC bridge function of the Intel ICH provides support for
- many functional units. This driver provides needed support for
- other drivers to control these functions, currently GPIO and
- watchdog.
-
-config MFD_RDC321X
- tristate "Support for RDC-R321x southbridge"
- select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
- help
- Say yes here if you want to have support for the RDC R-321x SoC
- southbridge which provides access to GPIOs and Watchdog using the
- southbridge PCI device configuration space.
-
-config MFD_JANZ_CMODIO
- tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
- select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
- help
- This is the core driver for the Janz CMOD-IO PCI MODULbus
- carrier board. This device is a PCI to MODULbus bridge which may
- host many different types of MODULbus daughterboards, including
- CAN and GPIO controllers.
-
-config MFD_JZ4740_ADC
- bool "Support for the JZ4740 SoC ADC core"
- select MFD_CORE
- select GENERIC_IRQ_CHIP
- depends on MACH_JZ4740
- help
- Say yes here if you want support for the ADC unit in the JZ4740 SoC.
- This driver is necessary for jz4740-battery and jz4740-hwmon driver.
-
-config MFD_VX855
- tristate "Support for VIA VX855/VX875 integrated south bridge"
- depends on PCI && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Say yes here to enable support for various functions of the
- VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
- and/or vx855_gpio drivers for this to do anything useful.
-
-config MFD_WL1273_CORE
- tristate "Support for TI WL1273 FM radio."
- depends on I2C && GENERIC_HARDIRQS
- select MFD_CORE
- default n
- help
- This is the core driver for the TI WL1273 FM radio. This MFD
- driver connects the radio-wl1273 V4L2 module and the wl1273
- audio codec.
-
-config MFD_OMAP_USB_HOST
- bool "Support OMAP USBHS core and TLL driver"
- depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
- default y
- help
- This is the core driver for the OAMP EHCI and OHCI drivers.
- This MFD driver does the required setup functionalities for
- OMAP USB Host drivers.
-
-config MFD_PM8XXX
- tristate
-
-config MFD_PM8921_CORE
- tristate "Qualcomm PM8921 PMIC chip"
- depends on MSM_SSBI
- select MFD_CORE
- select MFD_PM8XXX
- help
- If you say yes to this option, support will be included for the
- built-in PM8921 PMIC chip.
-
- This is required if your board has a PM8921 and uses its features,
- such as: MPPs, GPIOs, regulators, interrupts, and PWM.
-
- Say M here if you want to include support for PM8921 chip as a module.
- This will build a module called "pm8921-core".
-
-config MFD_PM8XXX_IRQ
- bool "Support for Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
-
-config TPS65911_COMPARATOR
- tristate
-
-config MFD_TPS65090
- bool "TPS65090 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- help
- If you say yes here you get support for the TPS65090 series of
- Power Management chips.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_AAT2870_CORE
- bool "Support for the AnalogicTech AAT2870"
- select MFD_CORE
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
- help
- If you say yes here you get support for the AAT2870.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_INTEL_MSIC
- bool "Support for Intel MSIC"
- depends on INTEL_SCU_IPC
- select MFD_CORE
- help
- Select this option to enable access to Intel MSIC (Avatele
- Passage) chip. This chip embeds audio, battery, GPIO, etc.
- devices used in Intel Medfield platforms.
-
-config MFD_RC5T583
- bool "Ricoh RC5T583 Power Management system device"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- Select this option to get support for the RICOH583 Power
- Management system device.
- This driver provides common support for accessing the device
- through i2c interface. The device supports multiple sub-devices
- like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
- Additional drivers must be enabled in order to use the
- different functionality of the device.
-
-config MFD_STA2X11
- bool "STA2X11 multi function device support"
- depends on STA2X11 && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_MMIO
-
-config MFD_SYSCON
- bool "System Controller Register R/W Based on Regmap"
- select REGMAP_MMIO
- help
- Select this option to enable accessing system control registers
- via regmap.
-
-config MFD_PALMAS
- bool "Support for the TI Palmas series chips"
- select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
- help
- If you say yes here you get support for the Palmas
- series of PMIC chips from Texas Instruments.
-
-config MFD_VIPERBOARD
- tristate "Support for Nano River Technologies Viperboard"
- select MFD_CORE
- depends on USB && GENERIC_HARDIRQS
- default n
- help
- Say yes here if you want support for Nano River Technologies
- Viperboard.
- There are mfd cell drivers available for i2c master, adc and
- both gpios found on the board. The spi part does not yet
- have a driver.
- You need to select the mfd cell drivers separately.
- The drivers do not support all features the board exposes.
-
-config MFD_RETU
- tristate "Support for Retu multi-function device"
- select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
- select REGMAP_IRQ
- help
- Retu is a multi-function device found on Nokia Internet Tablets
- (770, N800 and N810).
-
-config MFD_AS3711
- bool "Support for AS3711"
- select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Support for the AS3711 PMIC from AMS
-
endmenu
endif