summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-06 23:08:39 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-06 23:08:39 +0400
commit1fe9eb184721132c7254d76d9ef31c96edad8870 (patch)
treec055ffb7f201bc2370714ebe186a922d0eb39d0d /drivers/mfd
parent0bb464624140bfdd8389d4c5464ba134b2856049 (diff)
parent89abd4df28c6f85645e32f37ffab6426f800e4a1 (diff)
downloadlinux-1fe9eb184721132c7254d76d9ef31c96edad8870.tar.xz
Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Pull MFD updates from Lee Jones: "Changes to existing drivers: - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm - regmap use of and/or clean-up: tps65090, twl6040 - basic renaming: max14577 - use new cpufreq helpers: db8500-prcmu - increase regulator support: stmpe, arizona, wm5102 - reduce legacy GPIO overhead: stmpe - provide necessary remove path: bcm590xx - expand sysfs presence: kempld - move driver specific code out to drivers: rtc-s5m, arizona - clk handling: twl6040 - use managed (devm_*) resources: ipaq-micro - clean-up/remove unused/duplicated code: tps65218, sec, pm8921, abx500-core, db8500-prcmu, menelaus - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon, cros_ec_spi - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686, max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu, max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host, ipaq-micro Support for new devices: - add support for max77836 into max14577 - add support for tps658640 into tps6586x - add support for cros-ec-i2c-tunnel into cros_ec - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms - add new driver for axp20x - add new driver for sun6i-prcm - add new driver for ipaq-micro" * tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits) mfd: wm5102: Correct default for LDO Control 2 register mfd: menelaus: Use module_i2c_driver mfd: tps65218: Terminate of match table mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG mfd: ti-keystone-devctrl: Add bindings for device state control mfd: palmas: Format the header file mfd: abx500-core: Remove unused function abx500_dump_all_banks() mfd: arizona: Correct addresses of always-on trigger registers mfd: max14577: Cast to architecture agnostic data type i2c: ChromeOS EC tunnel driver mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable mfd: cros_ec: spi: Add mutex to cros_ec_spi mfd: cros_ec: spi: Calculate delay between transfers correctly mfd: arizona: Correct error message for addition of main IRQ chip mfd: wm8997: Add registers for high power mode mfd: arizona: Add MICVDD to mapped regulators mfd: ipaq-micro: Make mfd_cell array const mfd: ipaq-micro: Use devm_ioremap_resource() ...
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig31
-rw-r--r--drivers/mfd/Makefile3
-rw-r--r--drivers/mfd/abx500-core.c16
-rw-r--r--drivers/mfd/arizona-core.c1
-rw-r--r--drivers/mfd/arizona-irq.c2
-rw-r--r--drivers/mfd/as3711.c2
-rw-r--r--drivers/mfd/axp20x.c258
-rw-r--r--drivers/mfd/bcm590xx.c9
-rw-r--r--drivers/mfd/cros_ec.c10
-rw-r--r--drivers/mfd/cros_ec_spi.c67
-rw-r--r--drivers/mfd/db8500-prcmu.c5
-rw-r--r--drivers/mfd/ipaq-micro.c482
-rw-r--r--drivers/mfd/kempld-core.c129
-rw-r--r--drivers/mfd/lp3943.c2
-rw-r--r--drivers/mfd/lpc_ich.c1
-rw-r--r--drivers/mfd/max14577.c40
-rw-r--r--drivers/mfd/max77686.c2
-rw-r--r--drivers/mfd/max77693.c2
-rw-r--r--drivers/mfd/max8907.c2
-rw-r--r--drivers/mfd/max8997.c2
-rw-r--r--drivers/mfd/max8998.c2
-rw-r--r--drivers/mfd/mc13xxx-core.c26
-rw-r--r--drivers/mfd/menelaus.c23
-rw-r--r--drivers/mfd/mfd-core.c11
-rw-r--r--drivers/mfd/omap-usb-host.c2
-rw-r--r--drivers/mfd/pm8921-core.c123
-rw-r--r--drivers/mfd/rdc321x-southbridge.c2
-rw-r--r--drivers/mfd/rtsx_usb.c16
-rw-r--r--drivers/mfd/sec-core.c88
-rw-r--r--drivers/mfd/sec-irq.c2
-rw-r--r--drivers/mfd/sm501.c2
-rw-r--r--drivers/mfd/stmpe-i2c.c30
-rw-r--r--drivers/mfd/stmpe.c33
-rw-r--r--drivers/mfd/stmpe.h2
-rw-r--r--drivers/mfd/sun6i-prcm.c134
-rw-r--r--drivers/mfd/syscon.c6
-rw-r--r--drivers/mfd/tps6507x.c2
-rw-r--r--drivers/mfd/tps65218.c1
-rw-r--r--drivers/mfd/tps6586x.c2
-rw-r--r--drivers/mfd/tps65910.c2
-rw-r--r--drivers/mfd/twl6040.c42
-rw-r--r--drivers/mfd/wm5102-tables.c4
-rw-r--r--drivers/mfd/wm5110-tables.c14
-rw-r--r--drivers/mfd/wm8400-core.c2
-rw-r--r--drivers/mfd/wm8997-tables.c14
45 files changed, 1284 insertions, 367 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6deb8a11c12f..ee8204cc31e9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -67,6 +67,18 @@ config MFD_BCM590XX
help
Support for the BCM590xx PMUs from Broadcom
+config MFD_AXP20X
+ bool "X-Powers AXP20X"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y
+ help
+ If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ This driver include only the core APIs. You have to select individual
+ components like regulators or the PEK (Power Enable Key) under the
+ corresponding menus.
+
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
@@ -250,6 +262,16 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_IPAQ_MICRO
+ bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
+ depends on SA1100_H3100 || SA1100_H3600
+ select MFD_CORE
+ help
+ Select this to get support for the Microcontroller found in
+ the Compaq iPAQ handheld computers. This is an Atmel
+ AT90LS8535 microcontroller flashed with a special iPAQ
+ firmware using the custom protocol implemented in this driver.
+
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
@@ -675,6 +697,7 @@ config MFD_DB8500_PRCMU
config MFD_STMPE
bool "STMicroelectronics STMPE"
depends on (I2C=y || SPI_MASTER=y)
+ depends on OF
select MFD_CORE
help
Support for the STMPE family of I/O Expanders from
@@ -719,6 +742,14 @@ config MFD_STA2X11
select MFD_CORE
select REGMAP_MMIO
+config MFD_SUN6I_PRCM
+ bool "Allwinner A31 PRCM controller"
+ depends on ARCH_SUNXI
+ select MFD_CORE
+ help
+ Support for the PRCM (Power/Reset/Clock Management) unit available
+ in A31 SoC.
+
config MFD_SYSCON
bool "System Controller Register R/W Based on Regmap"
select REGMAP_MMIO
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index cec3487b539e..8afedba535c7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o
obj-$(CONFIG_STMPE_SPI) += stmpe-spi.o
+obj-$(CONFIG_MFD_SUN6I_PRCM) += sun6i-prcm.o
obj-$(CONFIG_MFD_TC3589X) += tc3589x.o
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
@@ -102,6 +103,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
+obj-$(CONFIG_MFD_AXP20X) += axp20x.o
obj-$(CONFIG_MFD_LP3943) += lp3943.o
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
@@ -166,3 +168,4 @@ obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
+obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index f3a15aa54d7b..fe418995108c 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -151,22 +151,6 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
}
EXPORT_SYMBOL(abx500_startup_irq_enabled);
-void abx500_dump_all_banks(void)
-{
- struct abx500_ops *ops;
- struct device dummy_child = {NULL};
- struct abx500_device_entry *dev_entry;
-
- list_for_each_entry(dev_entry, &abx500_list, list) {
- dummy_child.parent = dev_entry->dev;
- ops = &dev_entry->ops;
-
- if ((ops != NULL) && (ops->dump_all_banks != NULL))
- ops->dump_all_banks(&dummy_child);
- }
-}
-EXPORT_SYMBOL(abx500_dump_all_banks);
-
MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
MODULE_DESCRIPTION("ABX500 core driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 07e6e27be23c..cfc191abae4a 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -583,6 +583,7 @@ static const char *wm5102_supplies[] = {
"CPVDD",
"SPKVDDL",
"SPKVDDR",
+ "MICVDD",
};
static const struct mfd_cell wm5102_devs[] = {
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 88758ab9402b..17102f589100 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -285,7 +285,7 @@ int arizona_irq_init(struct arizona *arizona)
IRQF_ONESHOT, -1, irq,
&arizona->irq_chip);
if (ret != 0) {
- dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret);
+ dev_err(arizona->dev, "Failed to add main IRQs: %d\n", ret);
goto err_aod;
}
diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
index ec684fcedb42..d9706ede8d39 100644
--- a/drivers/mfd/as3711.c
+++ b/drivers/mfd/as3711.c
@@ -114,7 +114,7 @@ static const struct regmap_config as3711_regmap_config = {
};
#ifdef CONFIG_OF
-static struct of_device_id as3711_of_match[] = {
+static const struct of_device_id as3711_of_match[] = {
{.compatible = "ams,as3711",},
{}
};
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
new file mode 100644
index 000000000000..dee653989e3a
--- /dev/null
+++ b/drivers/mfd/axp20x.c
@@ -0,0 +1,258 @@
+/*
+ * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ *
+ * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
+ * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as 4 configurable GPIOs.
+ *
+ * Author: Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define AXP20X_OFF 0x80
+
+static const struct regmap_range axp20x_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
+};
+
+static const struct regmap_range axp20x_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
+};
+
+static const struct regmap_access_table axp20x_writeable_table = {
+ .yes_ranges = axp20x_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
+};
+
+static const struct regmap_access_table axp20x_volatile_table = {
+ .yes_ranges = axp20x_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
+};
+
+static struct resource axp20x_pek_resources[] = {
+ {
+ .name = "PEK_DBR",
+ .start = AXP20X_IRQ_PEK_RIS_EDGE,
+ .end = AXP20X_IRQ_PEK_RIS_EDGE,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "PEK_DBF",
+ .start = AXP20X_IRQ_PEK_FAL_EDGE,
+ .end = AXP20X_IRQ_PEK_FAL_EDGE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct regmap_config axp20x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp20x_writeable_table,
+ .volatile_table = &axp20x_volatile_table,
+ .max_register = AXP20X_FG_RES,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define AXP20X_IRQ(_irq, _off, _mask) \
+ [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+
+static const struct regmap_irq axp20x_regmap_irqs[] = {
+ AXP20X_IRQ(ACIN_OVER_V, 0, 7),
+ AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
+ AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
+ AXP20X_IRQ(VBUS_OVER_V, 0, 4),
+ AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
+ AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
+ AXP20X_IRQ(VBUS_V_LOW, 0, 1),
+ AXP20X_IRQ(BATT_PLUGIN, 1, 7),
+ AXP20X_IRQ(BATT_REMOVAL, 1, 6),
+ AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
+ AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
+ AXP20X_IRQ(CHARG, 1, 3),
+ AXP20X_IRQ(CHARG_DONE, 1, 2),
+ AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
+ AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
+ AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
+ AXP20X_IRQ(CHARG_I_LOW, 2, 6),
+ AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
+ AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
+ AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
+ AXP20X_IRQ(PEK_SHORT, 2, 1),
+ AXP20X_IRQ(PEK_LONG, 2, 0),
+ AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
+ AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
+ AXP20X_IRQ(VBUS_VALID, 3, 5),
+ AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
+ AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
+ AXP20X_IRQ(VBUS_SESS_END, 3, 2),
+ AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
+ AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
+ AXP20X_IRQ(TIMER, 4, 7),
+ AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
+ AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
+ AXP20X_IRQ(GPIO3_INPUT, 4, 3),
+ AXP20X_IRQ(GPIO2_INPUT, 4, 2),
+ AXP20X_IRQ(GPIO1_INPUT, 4, 1),
+ AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+};
+
+static const struct of_device_id axp20x_of_match[] = {
+ { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
+ { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, axp20x_of_match);
+
+/*
+ * This is useless for OF-enabled devices, but it is needed by I2C subsystem
+ */
+static const struct i2c_device_id axp20x_i2c_id[] = {
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+
+static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
+ .name = "axp20x_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .num_regs = 5,
+ .irqs = axp20x_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .mask_invert = true,
+ .init_ack_masked = true,
+};
+
+static const char * const axp20x_supplies[] = {
+ "acin",
+ "vin2",
+ "vin3",
+ "ldo24in",
+ "ldo3in",
+ "ldo5in",
+};
+
+static struct mfd_cell axp20x_cells[] = {
+ {
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp20x_pek_resources),
+ .resources = axp20x_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ .parent_supplies = axp20x_supplies,
+ .num_parent_supplies = ARRAY_SIZE(axp20x_supplies),
+ },
+};
+
+static struct axp20x_dev *axp20x_pm_power_off;
+static void axp20x_power_off(void)
+{
+ regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
+ AXP20X_OFF);
+}
+
+static int axp20x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct axp20x_dev *axp20x;
+ const struct of_device_id *of_id;
+ int ret;
+
+ axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
+ if (!axp20x)
+ return -ENOMEM;
+
+ of_id = of_match_device(axp20x_of_match, &i2c->dev);
+ if (!of_id) {
+ dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+
+ axp20x->i2c_client = i2c;
+ axp20x->dev = &i2c->dev;
+ dev_set_drvdata(axp20x->dev, axp20x);
+
+ axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ if (IS_ERR(axp20x->regmap)) {
+ ret = PTR_ERR(axp20x->regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
+ IRQF_ONESHOT | IRQF_SHARED, -1,
+ &axp20x_regmap_irq_chip,
+ &axp20x->regmap_irqc);
+ if (ret) {
+ dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
+ ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+
+ if (ret) {
+ dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
+ regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
+ return ret;
+ }
+
+ if (!pm_power_off) {
+ axp20x_pm_power_off = axp20x;
+ pm_power_off = axp20x_power_off;
+ }
+
+ dev_info(&i2c->dev, "AXP20X driver loaded\n");
+
+ return 0;
+}
+
+static int axp20x_i2c_remove(struct i2c_client *i2c)
+{
+ struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
+
+ if (axp20x == axp20x_pm_power_off) {
+ axp20x_pm_power_off = NULL;
+ pm_power_off = NULL;
+ }
+
+ mfd_remove_devices(axp20x->dev);
+ regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
+
+ return 0;
+}
+
+static struct i2c_driver axp20x_i2c_driver = {
+ .driver = {
+ .name = "axp20x",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(axp20x_of_match),
+ },
+ .probe = axp20x_i2c_probe,
+ .remove = axp20x_i2c_remove,
+ .id_table = axp20x_i2c_id,
+};
+
+module_i2c_driver(axp20x_i2c_driver);
+
+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index 43cba1a1973c..e334de000e8c 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -96,6 +96,12 @@ err:
return ret;
}
+static int bcm590xx_i2c_remove(struct i2c_client *i2c)
+{
+ mfd_remove_devices(&i2c->dev);
+ return 0;
+}
+
static const struct of_device_id bcm590xx_of_match[] = {
{ .compatible = "brcm,bcm59056" },
{ }
@@ -115,6 +121,7 @@ static struct i2c_driver bcm590xx_i2c_driver = {
.of_match_table = of_match_ptr(bcm590xx_of_match),
},
.probe = bcm590xx_i2c_probe,
+ .remove = bcm590xx_i2c_remove,
.id_table = bcm590xx_i2c_id,
};
module_i2c_driver(bcm590xx_i2c_driver);
@@ -122,4 +129,4 @@ module_i2c_driver(bcm590xx_i2c_driver);
MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
MODULE_DESCRIPTION("BCM590xx multi-function driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:bcm590xx");
+MODULE_ALIAS("i2c:bcm590xx");
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 783fe2e73e1e..38fe9bf0d169 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -30,7 +30,7 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
uint8_t *out;
int csum, i;
- BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE);
+ BUG_ON(msg->out_len > EC_PROTO2_MAX_PARAM_SIZE);
out = ec_dev->dout;
out[0] = EC_CMD_VERSION0 + msg->version;
out[1] = msg->cmd;
@@ -90,6 +90,11 @@ static const struct mfd_cell cros_devs[] = {
.id = 1,
.of_compatible = "google,cros-ec-keyb",
},
+ {
+ .name = "cros-ec-i2c-tunnel",
+ .id = 2,
+ .of_compatible = "google,cros-ec-i2c-tunnel",
+ },
};
int cros_ec_register(struct cros_ec_device *ec_dev)
@@ -184,3 +189,6 @@ int cros_ec_resume(struct cros_ec_device *ec_dev)
EXPORT_SYMBOL(cros_ec_resume);
#endif
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC core driver");
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 84af8d7a4295..0b8d32829166 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -39,14 +39,22 @@
#define EC_MSG_PREAMBLE_COUNT 32
/*
- * We must get a response from the EC in 5ms. This is a very long
- * time, but the flash write command can take 2-3ms. The EC command
- * processing is currently not very fast (about 500us). We could
- * look at speeding this up and making the flash write command a
- * 'slow' command, requiring a GET_STATUS wait loop, like flash
- * erase.
- */
-#define EC_MSG_DEADLINE_MS 5
+ * Allow for a long time for the EC to respond. We support i2c
+ * tunneling and support fairly long messages for the tunnel (249
+ * bytes long at the moment). If we're talking to a 100 kHz device
+ * on the other end and need to transfer ~256 bytes, then we need:
+ * 10 us/bit * ~10 bits/byte * ~256 bytes = ~25ms
+ *
+ * We'll wait 4 times that to handle clock stretching and other
+ * paranoia.
+ *
+ * It's pretty unlikely that we'll really see a 249 byte tunnel in
+ * anything other than testing. If this was more common we might
+ * consider having slow commands like this require a GET_STATUS
+ * wait loop. The 'flash write' command would be another candidate
+ * for this, clocking in at 2-3ms.
+ */
+#define EC_MSG_DEADLINE_MS 100
/*
* Time between raising the SPI chip select (for the end of a
@@ -65,11 +73,13 @@
* if no record
* @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
* is sent when we want to turn off CS at the end of a transaction.
+ * @lock: mutex to ensure only one user of cros_ec_command_spi_xfer at a time
*/
struct cros_ec_spi {
struct spi_device *spi;
s64 last_transfer_ns;
unsigned int end_of_msg_delay;
+ struct mutex lock;
};
static void debug_packet(struct device *dev, const char *name, u8 *ptr,
@@ -111,7 +121,9 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
/* Receive data until we see the header byte */
deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
- do {
+ while (true) {
+ unsigned long start_jiffies = jiffies;
+
memset(&trans, 0, sizeof(trans));
trans.cs_change = 1;
trans.rx_buf = ptr = ec_dev->din;
@@ -132,12 +144,19 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
break;
}
}
+ if (ptr != end)
+ break;
- if (time_after(jiffies, deadline)) {
+ /*
+ * Use the time at the start of the loop as a timeout. This
+ * gives us one last shot at getting the transfer and is useful
+ * in case we got context switched out for a while.
+ */
+ if (time_after(start_jiffies, deadline)) {
dev_warn(ec_dev->dev, "EC failed to respond in time\n");
return -ETIMEDOUT;
}
- } while (ptr == end);
+ }
/*
* ptr now points to the header byte. Copy any valid data to the
@@ -208,6 +227,13 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
int ret = 0, final_ret;
struct timespec ts;
+ /*
+ * We have the shared ec_dev buffer plus we do lots of separate spi_sync
+ * calls, so we need to make sure only one person is using this at a
+ * time.
+ */
+ mutex_lock(&ec_spi->lock);
+
len = cros_ec_prepare_tx(ec_dev, ec_msg);
dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
@@ -219,7 +245,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
ktime_get_ts(&ts);
delay = timespec_to_ns(&ts) - ec_spi->last_transfer_ns;
if (delay < EC_SPI_RECOVERY_TIME_NS)
- ndelay(delay);
+ ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
}
/* Transmit phase - send our message */
@@ -260,7 +286,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
ret = final_ret;
if (ret < 0) {
dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
- return ret;
+ goto exit;
}
/* check response error code */
@@ -269,14 +295,16 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
ec_msg->cmd, ptr[0]);
debug_packet(ec_dev->dev, "in_err", ptr, len);
- return -EINVAL;
+ ret = -EINVAL;
+ goto exit;
}
len = ptr[1];
sum = ptr[0] + ptr[1];
if (len > ec_msg->in_len) {
dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
len, ec_msg->in_len);
- return -ENOSPC;
+ ret = -ENOSPC;
+ goto exit;
}
/* copy response packet payload and compute checksum */
@@ -293,10 +321,14 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
dev_err(ec_dev->dev,
"bad packet checksum, expected %02x, got %02x\n",
sum, ptr[len + 2]);
- return -EBADMSG;
+ ret = -EBADMSG;
+ goto exit;
}
- return 0;
+ ret = 0;
+exit:
+ mutex_unlock(&ec_spi->lock);
+ return ret;
}
static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev)
@@ -327,6 +359,7 @@ static int cros_ec_spi_probe(struct spi_device *spi)
if (ec_spi == NULL)
return -ENOMEM;
ec_spi->spi = spi;
+ mutex_init(&ec_spi->lock);
ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
if (!ec_dev)
return -ENOMEM;
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index b11fdd63eecd..193cf168ba84 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2300,9 +2300,6 @@ int prcmu_ac_wake_req(void)
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
msecs_to_jiffies(5000))) {
-#if defined(CONFIG_DBX500_PRCMU_DEBUG)
- db8500_prcmu_debug_dump(__func__, true, true);
-#endif
pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
__func__);
ret = -EFAULT;
@@ -3112,7 +3109,7 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
{
struct device_node *np;
struct resource ab8500_resource;
- struct mfd_cell ab8500_cell = {
+ const struct mfd_cell ab8500_cell = {
.name = "ab8500-core",
.of_compatible = "stericsson,ab8500",
.id = AB8500_VERSION_AB8500,
diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c
new file mode 100644
index 000000000000..7e50fe0118e3
--- /dev/null
+++ b/drivers/mfd/ipaq-micro.c
@@ -0,0 +1,482 @@
+/*
+ * Compaq iPAQ h3xxx Atmel microcontroller companion support
+ *
+ * This is an Atmel AT90LS8535 with a special flashed-in firmware that
+ * implements the special protocol used by this driver.
+ *
+ * based on previous kernel 2.4 version by Andrew Christian
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Dmitry Artamonow <mad_soft@inbox.ru>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/string.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <mach/hardware.h>
+
+static void ipaq_micro_trigger_tx(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ struct ipaq_micro_msg *msg = micro->msg;
+ int i, bp;
+ u8 checksum;
+ u32 val;
+
+ bp = 0;
+ tx->buf[bp++] = CHAR_SOF;
+
+ checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f);
+ tx->buf[bp++] = checksum;
+
+ for (i = 0; i < msg->tx_len; i++) {
+ tx->buf[bp++] = msg->tx_data[i];
+ checksum += msg->tx_data[i];
+ }
+
+ tx->buf[bp++] = checksum;
+ tx->len = bp;
+ tx->index = 0;
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ tx->buf, tx->len, true);
+
+ /* Enable interrupt */
+ val = readl(micro->base + UTCR3);
+ val |= UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg)
+{
+ unsigned long flags;
+
+ dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len);
+
+ spin_lock_irqsave(&micro->lock, flags);
+ if (micro->msg) {
+ list_add_tail(&msg->node, &micro->queue);
+ spin_unlock_irqrestore(&micro->lock, flags);
+ return 0;
+ }
+ micro->msg = msg;
+ ipaq_micro_trigger_tx(micro);
+ spin_unlock_irqrestore(&micro->lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(ipaq_micro_tx_msg);
+
+static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data)
+{
+ int i;
+
+ dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len);
+
+ spin_lock(&micro->lock);
+ switch (id) {
+ case MSG_VERSION:
+ case MSG_EEPROM_READ:
+ case MSG_EEPROM_WRITE:
+ case MSG_BACKLIGHT:
+ case MSG_NOTIFY_LED:
+ case MSG_THERMAL_SENSOR:
+ case MSG_BATTERY:
+ /* Handle synchronous messages */
+ if (micro->msg && micro->msg->id == id) {
+ struct ipaq_micro_msg *msg = micro->msg;
+
+ memcpy(msg->rx_data, data, len);
+ msg->rx_len = len;
+ complete(&micro->msg->ack);
+ if (!list_empty(&micro->queue)) {
+ micro->msg = list_entry(micro->queue.next,
+ struct ipaq_micro_msg,
+ node);
+ list_del_init(&micro->msg->node);
+ ipaq_micro_trigger_tx(micro);
+ } else
+ micro->msg = NULL;
+ dev_dbg(micro->dev, "OK RX message 0x%02x\n", id);
+ } else {
+ dev_err(micro->dev,
+ "out of band RX message 0x%02x\n", id);
+ if(!micro->msg)
+ dev_info(micro->dev, "no message queued\n");
+ else
+ dev_info(micro->dev, "expected message %02x\n",
+ micro->msg->id);
+ }
+ break;
+ case MSG_KEYBOARD:
+ if (micro->key)
+ micro->key(micro->key_data, len, data);
+ else
+ dev_dbg(micro->dev, "key message ignored, no handle \n");
+ break;
+ case MSG_TOUCHSCREEN:
+ if (micro->ts)
+ micro->ts(micro->ts_data, len, data);
+ else
+ dev_dbg(micro->dev, "touchscreen message ignored, no handle \n");
+ break;
+ default:
+ dev_err(micro->dev,
+ "unknown msg %d [%d] ", id, len);
+ for (i = 0; i < len; ++i)
+ pr_cont("0x%02x ", data[i]);
+ pr_cont("\n");
+ }
+ spin_unlock(&micro->lock);
+}
+
+static void micro_process_char(struct ipaq_micro *micro, u8 ch)
+{
+ struct ipaq_micro_rxdev *rx = &micro->rx;
+
+ switch (rx->state) {
+ case STATE_SOF: /* Looking for SOF */
+ if (ch == CHAR_SOF)
+ rx->state = STATE_ID; /* Next byte is the id and len */
+ break;
+ case STATE_ID: /* Looking for id and len byte */
+ rx->id = (ch & 0xf0) >> 4 ;
+ rx->len = (ch & 0x0f);
+ rx->index = 0;
+ rx->chksum = ch;
+ rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM;
+ break;
+ case STATE_DATA: /* Looking for 'len' data bytes */
+ rx->chksum += ch;
+ rx->buf[rx->index] = ch;
+ if (++rx->index == rx->len)
+ rx->state = STATE_CHKSUM;
+ break;
+ case STATE_CHKSUM: /* Looking for the checksum */
+ if (ch == rx->chksum)
+ micro_rx_msg(micro, rx->id, rx->len, rx->buf);
+ rx->state = STATE_SOF;
+ break;
+ }
+}
+
+static void micro_rx_chars(struct ipaq_micro *micro)
+{
+ u32 status, ch;
+
+ while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) {
+ ch = readl(micro->base + UTDR);
+ if (status & UTSR1_PRE)
+ dev_err(micro->dev, "rx: parity error\n");
+ else if (status & UTSR1_FRE)
+ dev_err(micro->dev, "rx: framing error\n");
+ else if (status & UTSR1_ROR)
+ dev_err(micro->dev, "rx: overrun error\n");
+ micro_process_char(micro, ch);
+ }
+}
+
+static void ipaq_micro_get_version(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_msg msg = {
+ .id = MSG_VERSION,
+ };
+
+ ipaq_micro_tx_msg_sync(micro, &msg);
+ if (msg.rx_len == 4) {
+ memcpy(micro->version, msg.rx_data, 4);
+ micro->version[4] = '\0';
+ } else if (msg.rx_len == 9) {
+ memcpy(micro->version, msg.rx_data, 4);
+ micro->version[4] = '\0';
+ /* Bytes 4-7 are "pack", byte 8 is "boot type" */
+ } else {
+ dev_err(micro->dev,
+ "illegal version message %d bytes\n", msg.rx_len);
+ }
+}
+
+static void ipaq_micro_eeprom_read(struct ipaq_micro *micro,
+ u8 address, u8 len, u8 *data)
+{
+ struct ipaq_micro_msg msg = {
+ .id = MSG_EEPROM_READ,
+ };
+ u8 i;
+
+ for (i = 0; i < len; i++) {
+ msg.tx_data[0] = address + i;
+ msg.tx_data[1] = 1;
+ msg.tx_len = 2;
+ ipaq_micro_tx_msg_sync(micro, &msg);
+ memcpy(data + (i * 2), msg.rx_data, 2);
+ }
+}
+
+static char *ipaq_micro_str(u8 *wchar, u8 len)
+{
+ char retstr[256];
+ u8 i;
+
+ for (i = 0; i < len / 2; i++)
+ retstr[i] = wchar[i * 2];
+ return kstrdup(retstr, GFP_KERNEL);
+}
+
+static u16 ipaq_micro_to_u16(u8 *data)
+{
+ return data[1] << 8 | data[0];
+}
+
+static void ipaq_micro_eeprom_dump(struct ipaq_micro *micro)
+{
+ u8 dump[256];
+ char *str;
+
+ ipaq_micro_eeprom_read(micro, 0, 128, dump);
+ str = ipaq_micro_str(dump, 10);
+ if (str) {
+ dev_info(micro->dev, "HM version %s\n", str);
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+10, 40);
+ if (str) {
+ dev_info(micro->dev, "serial number: %s\n", str);
+ /* Feed the random pool with this */
+ add_device_randomness(str, strlen(str));
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+50, 20);
+ if (str) {
+ dev_info(micro->dev, "module ID: %s\n", str);
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+70, 10);
+ if (str) {
+ dev_info(micro->dev, "product revision: %s\n", str);
+ kfree(str);
+ }
+ dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80));
+ dev_info(micro->dev, "frame rate: %u fps\n",
+ ipaq_micro_to_u16(dump+82));
+ dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84));
+ dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86));
+ dev_info(micro->dev, "color display: %s\n",
+ ipaq_micro_to_u16(dump+88) ? "yes" : "no");
+ dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90));
+ dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92));
+ dev_info(micro->dev, "screen: %u x %u\n",
+ ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96));
+ print_hex_dump(KERN_DEBUG, "eeprom: ", DUMP_PREFIX_OFFSET, 16, 1,
+ dump, 256, true);
+
+}
+
+static void micro_tx_chars(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ u32 val;
+
+ while ((tx->index < tx->len) &&
+ (readl(micro->base + UTSR1) & UTSR1_TNF)) {
+ writel(tx->buf[tx->index], micro->base + UTDR);
+ tx->index++;
+ }
+
+ /* Stop interrupts */
+ val = readl(micro->base + UTCR3);
+ val &= ~UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+static void micro_reset_comm(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_rxdev *rx = &micro->rx;
+ u32 val;
+
+ if (micro->msg)
+ complete(&micro->msg->ack);
+
+ /* Initialize Serial channel protocol frame */
+ rx->state = STATE_SOF; /* Reset the state machine */
+
+ /* Set up interrupts */
+ writel(0x01, micro->sdlc + 0x0); /* Select UART mode */
+
+ /* Clean up CR3 */
+ writel(0x0, micro->base + UTCR3);
+
+ /* Format: 8N1 */
+ writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0);
+
+ /* Baud rate: 115200 */
+ writel(0x0, micro->base + UTCR1);
+ writel(0x1, micro->base + UTCR2);
+
+ /* Clear SR0 */
+ writel(0xff, micro->base + UTSR0);
+
+ /* Enable RX int, disable TX int */
+ writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3);
+ val = readl(micro->base + UTCR3);
+ val &= ~UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+static irqreturn_t micro_serial_isr(int irq, void *dev_id)
+{
+ struct ipaq_micro *micro = dev_id;
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ u32 status;
+
+ status = readl(micro->base + UTSR0);
+ do {
+ if (status & (UTSR0_RID | UTSR0_RFS)) {
+ if (status & UTSR0_RID)
+ /* Clear the Receiver IDLE bit */
+ writel(UTSR0_RID, micro->base + UTSR0);
+ micro_rx_chars(micro);
+ }
+
+ /* Clear break bits */
+ if (status & (UTSR0_RBB | UTSR0_REB))
+ writel(status & (UTSR0_RBB | UTSR0_REB),
+ micro->base + UTSR0);
+
+ if (status & UTSR0_TFS)
+ micro_tx_chars(micro);
+
+ status = readl(micro->base + UTSR0);
+
+ } while (((tx->index < tx->len) && (status & UTSR0_TFS)) ||
+ (status & (UTSR0_RFS | UTSR0_RID)));
+
+ return IRQ_HANDLED;
+}
+
+static const struct mfd_cell micro_cells[] = {
+ { .name = "ipaq-micro-backlight", },
+ { .name = "ipaq-micro-battery", },
+ { .name = "ipaq-micro-keys", },
+ { .name = "ipaq-micro-ts", },
+ { .name = "ipaq-micro-leds", },
+};
+
+static int micro_resume(struct device *dev)
+{
+ struct ipaq_micro *micro = dev_get_drvdata(dev);
+
+ micro_reset_comm(micro);
+ mdelay(10);
+
+ return 0;
+}
+
+static int micro_probe(struct platform_device *pdev)
+{
+ struct ipaq_micro *micro;
+ struct resource *res;
+ int ret;
+ int irq;
+
+ micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL);
+ if (!micro)
+ return -ENOMEM;
+
+ micro->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ micro->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(micro->base))
+ return PTR_ERR(micro->base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res)
+ return -EINVAL;
+
+ micro->sdlc = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(micro->sdlc))
+ return PTR_ERR(micro->sdlc);
+
+ micro_reset_comm(micro);
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq)
+ return -EINVAL;
+ ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr,
+ IRQF_SHARED, "ipaq-micro",
+ micro);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to grab serial port IRQ\n");
+ return ret;
+ } else
+ dev_info(&pdev->dev, "grabbed serial port IRQ\n");
+
+ spin_lock_init(&micro->lock);
+ INIT_LIST_HEAD(&micro->queue);
+ platform_set_drvdata(pdev, micro);
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells,
+ ARRAY_SIZE(micro_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "error adding MFD cells");
+ return ret;
+ }
+
+ /* Check version */
+ ipaq_micro_get_version(micro);
+ dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version);
+ ipaq_micro_eeprom_dump(micro);
+
+ return 0;
+}
+
+static int micro_remove(struct platform_device *pdev)
+{
+ struct ipaq_micro *micro = platform_get_drvdata(pdev);
+ u32 val;
+
+ mfd_remove_devices(&pdev->dev);
+
+ val = readl(micro->base + UTCR3);
+ val &= ~(UTCR3_RXE | UTCR3_RIE); /* disable receive interrupt */
+ val &= ~(UTCR3_TXE | UTCR3_TIE); /* disable transmit interrupt */
+ writel(val, micro->base + UTCR3);
+
+ return 0;
+}
+
+static const struct dev_pm_ops micro_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, micro_resume)
+};
+
+static struct platform_driver micro_device_driver = {
+ .driver = {
+ .name = "ipaq-h3xxx-micro",
+ .pm = &micro_dev_pm_ops,
+ },
+ .probe = micro_probe,
+ .remove = micro_remove,
+ /* .shutdown = micro_suspend, // FIXME */
+};
+module_platform_driver(micro_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro core and backlight");
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 07692604e119..f7ff0188603d 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -86,7 +86,7 @@ enum kempld_cells {
KEMPLD_UART,
};
-static struct mfd_cell kempld_devs[] = {
+static const struct mfd_cell kempld_devs[] = {
[KEMPLD_I2C] = {
.name = "kempld-i2c",
},
@@ -288,9 +288,38 @@ EXPORT_SYMBOL_GPL(kempld_release_mutex);
*/
static int kempld_get_info(struct kempld_device_data *pld)
{
+ int ret;
struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
+ char major, minor;
+
+ ret = pdata->get_info(pld);
+ if (ret)
+ return ret;
+
+ /* The Kontron PLD firmware version string has the following format:
+ * Pwxy.zzzz
+ * P: Fixed
+ * w: PLD number - 1 hex digit
+ * x: Major version - 1 alphanumerical digit (0-9A-V)
+ * y: Minor version - 1 alphanumerical digit (0-9A-V)
+ * zzzz: Build number - 4 zero padded hex digits */
- return pdata->get_info(pld);
+ if (pld->info.major < 10)
+ major = pld->info.major + '0';
+ else
+ major = (pld->info.major - 10) + 'A';
+ if (pld->info.minor < 10)
+ minor = pld->info.minor + '0';
+ else
+ minor = (pld->info.minor - 10) + 'A';
+
+ ret = scnprintf(pld->info.version, sizeof(pld->info.version),
+ "P%X%c%c.%04X", pld->info.number, major, minor,
+ pld->info.buildnr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
/*
@@ -307,9 +336,71 @@ static int kempld_register_cells(struct kempld_device_data *pld)
return pdata->register_cells(pld);
}
+static const char *kempld_get_type_string(struct kempld_device_data *pld)
+{
+ const char *version_type;
+
+ switch (pld->info.type) {
+ case 0:
+ version_type = "release";
+ break;
+ case 1:
+ version_type = "debug";
+ break;
+ case 2:
+ version_type = "custom";
+ break;
+ default:
+ version_type = "unspecified";
+ break;
+ }
+
+ return version_type;
+}
+
+static ssize_t kempld_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", pld->info.version);
+}
+
+static ssize_t kempld_specification_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%d.%d\n", pld->info.spec_major,
+ pld->info.spec_minor);
+}
+
+static ssize_t kempld_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", kempld_get_type_string(pld));
+}
+
+static DEVICE_ATTR(pld_version, S_IRUGO, kempld_version_show, NULL);
+static DEVICE_ATTR(pld_specification, S_IRUGO, kempld_specification_show,
+ NULL);
+static DEVICE_ATTR(pld_type, S_IRUGO, kempld_type_show, NULL);
+
+static struct attribute *pld_attributes[] = {
+ &dev_attr_pld_version.attr,
+ &dev_attr_pld_specification.attr,
+ &dev_attr_pld_type.attr,
+ NULL
+};
+
+static const struct attribute_group pld_attr_group = {
+ .attrs = pld_attributes,
+};
+
static int kempld_detect_device(struct kempld_device_data *pld)
{
- char *version_type;
u8 index_reg;
int ret;
@@ -335,27 +426,19 @@ static int kempld_detect_device(struct kempld_device_data *pld)
if (ret)
return ret;
- switch (pld->info.type) {
- case 0:
- version_type = "release";
- break;
- case 1:
- version_type = "debug";
- break;
- case 2:
- version_type = "custom";
- break;
- default:
- version_type = "unspecified";
- }
+ dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n",
+ pld->info.version, kempld_get_type_string(pld),
+ pld->info.spec_major, pld->info.spec_minor);
+
+ ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group);
+ if (ret)
+ return ret;
- dev_info(pld->dev, "Found Kontron PLD %d\n", pld->info.number);
- dev_info(pld->dev, "%s version %d.%d build %d, specification %d.%d\n",
- version_type, pld->info.major, pld->info.minor,
- pld->info.buildnr, pld->info.spec_major,
- pld->info.spec_minor);
+ ret = kempld_register_cells(pld);
+ if (ret)
+ sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
- return kempld_register_cells(pld);
+ return ret;
}
static int kempld_probe(struct platform_device *pdev)
@@ -399,6 +482,8 @@ static int kempld_remove(struct platform_device *pdev)
struct kempld_device_data *pld = platform_get_drvdata(pdev);
struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
+ sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
+
mfd_remove_devices(&pdev->dev);
pdata->release_hardware_mutex(pld);
diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c
index e32226836fb4..335b930112b2 100644
--- a/drivers/mfd/lp3943.c
+++ b/drivers/mfd/lp3943.c
@@ -62,7 +62,7 @@ static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
{ LP3943_REG_MUX3, 0xC0, 6 },
};
-static struct mfd_cell lp3943_devs[] = {
+static const struct mfd_cell lp3943_devs[] = {
{
.name = "lp3943-pwm",
.of_compatible = "ti,lp3943-pwm",
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 3f10ea3f45d1..7d8482ff5868 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -488,6 +488,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
[LPC_PPT] = {
.name = "Panther Point",
.iTCO_version = 2,
+ .gpio_version = ICH_V5_GPIO,
},
[LPC_LPT] = {
.name = "Lynx Point",
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 484d372a4892..4a5e885383f8 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -26,7 +26,7 @@
#include <linux/mfd/max14577.h>
#include <linux/mfd/max14577-private.h>
-static struct mfd_cell max14577_devs[] = {
+static const struct mfd_cell max14577_devs[] = {
{
.name = "max14577-muic",
.of_compatible = "maxim,max14577-muic",
@@ -38,7 +38,7 @@ static struct mfd_cell max14577_devs[] = {
{ .name = "max14577-charger", },
};
-static struct mfd_cell max77836_devs[] = {
+static const struct mfd_cell max77836_devs[] = {
{
.name = "max77836-muic",
.of_compatible = "maxim,max77836-muic",
@@ -57,7 +57,7 @@ static struct mfd_cell max77836_devs[] = {
},
};
-static struct of_device_id max14577_dt_match[] = {
+static const struct of_device_id max14577_dt_match[] = {
{
.compatible = "maxim,max14577",
.data = (void *)MAXIM_DEVICE_TYPE_MAX14577,
@@ -292,7 +292,7 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
struct device_node *np = i2c->dev.of_node;
int ret = 0;
const struct regmap_irq_chip *irq_chip;
- struct mfd_cell *mfd_devs;
+ const struct mfd_cell *mfd_devs;
unsigned int mfd_devs_size;
int irq_flags;
@@ -331,7 +331,8 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
of_id = of_match_device(max14577_dt_match, &i2c->dev);
if (of_id)
- max14577->dev_type = (unsigned int)of_id->data;
+ max14577->dev_type =
+ (enum maxim_device_type)of_id->data;
} else {
max14577->dev_type = id->driver_data;
}
@@ -414,20 +415,18 @@ static int max14577_suspend(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max14577 *max14577 = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
enable_irq_wake(max14577->irq);
- /*
- * MUIC IRQ must be disabled during suspend if this is
- * a wake up source because it will be handled before
- * resuming I2C.
- *
- * When device is woken up from suspend (e.g. by ADC change),
- * an interrupt occurs before resuming I2C bus controller.
- * Interrupt handler tries to read registers but this read
- * will fail because I2C is still suspended.
- */
- disable_irq(max14577->irq);
- }
+ /*
+ * MUIC IRQ must be disabled during suspend because if it happens
+ * while suspended it will be handled before resuming I2C.
+ *
+ * When device is woken up from suspend (e.g. by ADC change),
+ * an interrupt occurs before resuming I2C bus controller.
+ * Interrupt handler tries to read registers but this read
+ * will fail because I2C is still suspended.
+ */
+ disable_irq(max14577->irq);
return 0;
}
@@ -437,10 +436,9 @@ static int max14577_resume(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct max14577 *max14577 = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
disable_irq_wake(max14577->irq);
- enable_irq(max14577->irq);
- }
+ enable_irq(max14577->irq);
return 0;
}
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index e5fce765accb..ce869acf27ae 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -47,7 +47,7 @@ static struct regmap_config max77686_regmap_config = {
};
#ifdef CONFIG_OF
-static struct of_device_id max77686_pmic_dt_match[] = {
+static const struct of_device_id max77686_pmic_dt_match[] = {
{.compatible = "maxim,max77686", .data = NULL},
{},
};
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index c5535f018466..7e05428c756d 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -243,7 +243,7 @@ static const struct dev_pm_ops max77693_pm = {
};
#ifdef CONFIG_OF
-static struct of_device_id max77693_dt_match[] = {
+static const struct of_device_id max77693_dt_match[] = {
{ .compatible = "maxim,max77693" },
{},
};
diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
index 07740314b29d..232749c8813d 100644
--- a/drivers/mfd/max8907.c
+++ b/drivers/mfd/max8907.c
@@ -305,7 +305,7 @@ static int max8907_i2c_remove(struct i2c_client *i2c)
}
#ifdef CONFIG_OF
-static struct of_device_id max8907_of_match[] = {
+static const struct of_device_id max8907_of_match[] = {
{ .compatible = "maxim,max8907" },
{ },
};
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 8cf7a015cfe5..595364ee178a 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -51,7 +51,7 @@ static const struct mfd_cell max8997_devs[] = {
};
#ifdef CONFIG_OF
-static struct of_device_id max8997_pmic_dt_match[] = {
+static const struct of_device_id max8997_pmic_dt_match[] = {
{ .compatible = "maxim,max8997-pmic", .data = (void *)TYPE_MAX8997 },
{},
};
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 592db06098e6..a37cb7444b6e 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -132,7 +132,7 @@ int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
EXPORT_SYMBOL(max8998_update_reg);
#ifdef CONFIG_OF
-static struct of_device_id max8998_dt_match[] = {
+static const struct of_device_id max8998_dt_match[] = {
{ .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 },
{ .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 },
{ .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 },
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 0c6c21c5b1a8..acf5dd712eb2 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -660,34 +660,22 @@ int mc13xxx_common_init(struct device *dev)
if (ret)
return ret;
+ mutex_init(&mc13xxx->lock);
+
ret = request_threaded_irq(mc13xxx->irq, NULL, mc13xxx_irq_thread,
IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx);
if (ret)
return ret;
- mutex_init(&mc13xxx->lock);
-
if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata)
mc13xxx->flags = pdata->flags;
if (mc13xxx->flags & MC13XXX_USE_ADC)
mc13xxx_add_subdevice(mc13xxx, "%s-adc");
- if (mc13xxx->flags & MC13XXX_USE_CODEC) {
- if (pdata)
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec",
- pdata->codec, sizeof(*pdata->codec));
- else
- mc13xxx_add_subdevice(mc13xxx, "%s-codec");
- }
-
if (mc13xxx->flags & MC13XXX_USE_RTC)
mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
- if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
- &pdata->touch, sizeof(pdata->touch));
-
if (pdata) {
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
&pdata->regulators, sizeof(pdata->regulators));
@@ -695,10 +683,20 @@ int mc13xxx_common_init(struct device *dev)
pdata->leds, sizeof(*pdata->leds));
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
pdata->buttons, sizeof(*pdata->buttons));
+ if (mc13xxx->flags & MC13XXX_USE_CODEC)
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec",
+ pdata->codec, sizeof(*pdata->codec));
+ if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
+ &pdata->touch, sizeof(pdata->touch));
} else {
mc13xxx_add_subdevice(mc13xxx, "%s-regulator");
mc13xxx_add_subdevice(mc13xxx, "%s-led");
mc13xxx_add_subdevice(mc13xxx, "%s-pwrbutton");
+ if (mc13xxx->flags & MC13XXX_USE_CODEC)
+ mc13xxx_add_subdevice(mc13xxx, "%s-codec");
+ if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
+ mc13xxx_add_subdevice(mc13xxx, "%s-ts");
}
return 0;
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index ad25bfa3fb02..5e2667afe2bc 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1287,29 +1287,8 @@ static struct i2c_driver menelaus_i2c_driver = {
.id_table = menelaus_id,
};
-static int __init menelaus_init(void)
-{
- int res;
-
- res = i2c_add_driver(&menelaus_i2c_driver);
- if (res < 0) {
- pr_err(DRIVER_NAME ": driver registration failed\n");
- return res;
- }
-
- return 0;
-}
-
-static void __exit menelaus_exit(void)
-{
- i2c_del_driver(&menelaus_i2c_driver);
-
- /* FIXME: Shutdown menelaus parts that can be shut down */
-}
+module_i2c_driver(menelaus_i2c_driver);
MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
MODULE_DESCRIPTION("I2C interface for Menelaus.");
MODULE_LICENSE("GPL");
-
-module_init(menelaus_init);
-module_exit(menelaus_exit);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 267649244737..892d343193ad 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -102,7 +102,7 @@ static int mfd_add_device(struct device *parent, int id,
pdev->dev.dma_mask = parent->dma_mask;
pdev->dev.dma_parms = parent->dma_parms;
- ret = devm_regulator_bulk_register_supply_alias(
+ ret = regulator_bulk_register_supply_alias(
&pdev->dev, cell->parent_supplies,
parent, cell->parent_supplies,
cell->num_parent_supplies);
@@ -182,9 +182,9 @@ static int mfd_add_device(struct device *parent, int id,
return 0;
fail_alias:
- devm_regulator_bulk_unregister_supply_alias(&pdev->dev,
- cell->parent_supplies,
- cell->num_parent_supplies);
+ regulator_bulk_unregister_supply_alias(&pdev->dev,
+ cell->parent_supplies,
+ cell->num_parent_supplies);
fail_res:
kfree(res);
fail_device:
@@ -238,6 +238,9 @@ static int mfd_remove_devices_fn(struct device *dev, void *c)
pdev = to_platform_device(dev);
cell = mfd_get_cell(pdev);
+ regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies,
+ cell->num_parent_supplies);
+
/* find the base address of usage_count pointers (for freeing) */
if (!*usage_count || (cell->usage_count < *usage_count))
*usage_count = cell->usage_count;
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 651e249287dc..b48d80c367f9 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -557,7 +557,7 @@ static int usbhs_omap_get_dt_pdata(struct device *dev,
return 0;
}
-static struct of_device_id usbhs_child_match_table[] = {
+static const struct of_device_id usbhs_child_match_table[] = {
{ .compatible = "ti,omap-ehci", },
{ .compatible = "ti,omap-ohci", },
{ }
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index b97a97187ae9..959513803542 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -26,7 +26,6 @@
#include <linux/regmap.h>
#include <linux/of_platform.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/pm8xxx/core.h>
#define SSBI_REG_ADDR_IRQ_BASE 0x1BB
@@ -57,7 +56,6 @@
#define PM8921_NR_IRQS 256
struct pm_irq_chip {
- struct device *dev;
struct regmap *regmap;
spinlock_t pm_irq_lock;
struct irq_domain *irqdomain;
@@ -67,11 +65,6 @@ struct pm_irq_chip {
u8 config[0];
};
-struct pm8921 {
- struct device *dev;
- struct pm_irq_chip *irq_chip;
-};
-
static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
unsigned int *ip)
{
@@ -255,55 +248,6 @@ static struct irq_chip pm8xxx_irq_chip = {
.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
};
-/**
- * pm8xxx_get_irq_stat - get the status of the irq line
- * @chip: pointer to identify a pmic irq controller
- * @irq: the irq number
- *
- * The pm8xxx gpio and mpp rely on the interrupt block to read
- * the values on their pins. This function is to facilitate reading
- * the status of a gpio or an mpp line. The caller has to convert the
- * gpio number to irq number.
- *
- * RETURNS:
- * an int indicating the value read on that line
- */
-static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
- int pmirq, rc;
- unsigned int block, bits, bit;
- unsigned long flags;
- struct irq_data *irq_data = irq_get_irq_data(irq);
-
- pmirq = irq_data->hwirq;
-
- block = pmirq / 8;
- bit = pmirq % 8;
-
- spin_lock_irqsave(&chip->pm_irq_lock, flags);
-
- rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
- if (rc) {
- pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
- irq, pmirq, block, rc);
- goto bail_out;
- }
-
- rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
- if (rc) {
- pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
- irq, pmirq, block, rc);
- goto bail_out;
- }
-
- rc = (bits & (1 << bit)) ? 1 : 0;
-
-bail_out:
- spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
-
- return rc;
-}
-
static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
@@ -324,56 +268,6 @@ static const struct irq_domain_ops pm8xxx_irq_domain_ops = {
.map = pm8xxx_irq_domain_map,
};
-static int pm8921_readb(const struct device *dev, u16 addr, u8 *val)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_read(pmic->dev->parent, addr, val, 1);
-}
-
-static int pm8921_writeb(const struct device *dev, u16 addr, u8 val)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_write(pmic->dev->parent, addr, &val, 1);
-}
-
-static int pm8921_read_buf(const struct device *dev, u16 addr, u8 *buf,
- int cnt)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_read(pmic->dev->parent, addr, buf, cnt);
-}
-
-static int pm8921_write_buf(const struct device *dev, u16 addr, u8 *buf,
- int cnt)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return ssbi_write(pmic->dev->parent, addr, buf, cnt);
-}
-
-static int pm8921_read_irq_stat(const struct device *dev, int irq)
-{
- const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
- const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
- return pm8xxx_get_irq_stat(pmic->irq_chip, irq);
-}
-
-static struct pm8xxx_drvdata pm8921_drvdata = {
- .pmic_readb = pm8921_readb,
- .pmic_writeb = pm8921_writeb,
- .pmic_read_buf = pm8921_read_buf,
- .pmic_write_buf = pm8921_write_buf,
- .pmic_read_irq_stat = pm8921_read_irq_stat,
-};
-
static const struct regmap_config ssbi_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
@@ -392,7 +286,6 @@ MODULE_DEVICE_TABLE(of, pm8921_id_table);
static int pm8921_probe(struct platform_device *pdev)
{
- struct pm8921 *pmic;
struct regmap *regmap;
int irq, rc;
unsigned int val;
@@ -404,12 +297,6 @@ static int pm8921_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
- pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL);
- if (!pmic) {
- pr_err("Cannot alloc pm8921 struct\n");
- return -ENOMEM;
- }
-
regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent,
&ssbi_regmap_config);
if (IS_ERR(regmap))
@@ -434,18 +321,13 @@ static int pm8921_probe(struct platform_device *pdev)
pr_info("PMIC revision 2: %02X\n", val);
rev |= val << BITS_PER_BYTE;
- pmic->dev = &pdev->dev;
- pm8921_drvdata.pm_chip_data = pmic;
- platform_set_drvdata(pdev, &pm8921_drvdata);
-
chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
sizeof(chip->config[0]) * nirqs,
GFP_KERNEL);
if (!chip)
return -ENOMEM;
- pmic->irq_chip = chip;
- chip->dev = &pdev->dev;
+ platform_set_drvdata(pdev, chip);
chip->regmap = regmap;
chip->num_irqs = nirqs;
chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
@@ -481,8 +363,7 @@ static int pm8921_remove_child(struct device *dev, void *unused)
static int pm8921_remove(struct platform_device *pdev)
{
int irq = platform_get_irq(pdev, 0);
- struct pm8921 *pmic = pm8921_drvdata.pm_chip_data;
- struct pm_irq_chip *chip = pmic->irq_chip;
+ struct pm_irq_chip *chip = platform_get_drvdata(pdev);
device_for_each_child(&pdev->dev, NULL, pm8921_remove_child);
irq_set_chained_handler(irq, NULL);
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index c79569750be9..6575585f1d1f 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -38,7 +38,7 @@ static struct resource rdc321x_wdt_resource[] = {
};
static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = {
- .max_gpios = RDC321X_MAX_GPIO,
+ .max_gpios = RDC321X_NUM_GPIO,
};
static struct resource rdc321x_gpio_resources[] = {
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
index b53b9d46cc45..6352bec8419a 100644
--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -29,7 +29,7 @@ static int polling_pipe = 1;
module_param(polling_pipe, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)");
-static struct mfd_cell rtsx_usb_cells[] = {
+static const struct mfd_cell rtsx_usb_cells[] = {
[RTSX_USB_SD_CARD] = {
.name = "rtsx_usb_sdmmc",
.pdata_size = 0,
@@ -67,7 +67,7 @@ static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
add_timer(&ucr->sg_timer);
usb_sg_wait(&ucr->current_sg);
- del_timer(&ucr->sg_timer);
+ del_timer_sync(&ucr->sg_timer);
if (act_len)
*act_len = ucr->current_sg.bytes;
@@ -644,14 +644,14 @@ static int rtsx_usb_probe(struct usb_interface *intf,
if (ret)
goto out_init_fail;
+ /* initialize USB SG transfer timer */
+ setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
+
ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
if (ret)
goto out_init_fail;
- /* initialize USB SG transfer timer */
- init_timer(&ucr->sg_timer);
- setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
#ifdef CONFIG_PM
intf->needs_remote_wakeup = 1;
usb_enable_autosuspend(usb_dev);
@@ -687,9 +687,15 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
__func__, message.event);
+ /*
+ * Call to make sure LED is off during suspend to save more power.
+ * It is NOT a permanent state and could be turned on anytime later.
+ * Thus no need to call turn_on when resunming.
+ */
mutex_lock(&ucr->dev_mutex);
rtsx_usb_turn_off_led(ucr);
mutex_unlock(&ucr->dev_mutex);
+
return 0;
}
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 1cf27521fff4..be06d0abbf19 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -25,7 +25,6 @@
#include <linux/mfd/core.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/irq.h>
-#include <linux/mfd/samsung/rtc.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
@@ -91,7 +90,7 @@ static const struct mfd_cell s2mpa01_devs[] = {
};
#ifdef CONFIG_OF
-static struct of_device_id sec_dt_match[] = {
+static const struct of_device_id sec_dt_match[] = {
{ .compatible = "samsung,s5m8767-pmic",
.data = (void *)S5M8767X,
}, {
@@ -196,20 +195,6 @@ static const struct regmap_config s5m8767_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
-static const struct regmap_config s5m_rtc_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = SEC_RTC_REG_MAX,
-};
-
-static const struct regmap_config s2mps14_rtc_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-
- .max_register = S2MPS_RTC_REG_MAX,
-};
-
#ifdef CONFIG_OF
/*
* Only the common platform data elements for s5m8767 are parsed here from the
@@ -264,8 +249,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
- const struct regmap_config *regmap, *regmap_rtc;
+ const struct regmap_config *regmap;
struct sec_pmic_dev *sec_pmic;
+ unsigned long device_type;
int ret;
sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
@@ -277,7 +263,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_pmic->dev = &i2c->dev;
sec_pmic->i2c = i2c;
sec_pmic->irq = i2c->irq;
- sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
+ device_type = sec_i2c_get_driver_data(i2c, id);
if (sec_pmic->dev->of_node) {
pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
@@ -285,7 +271,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
ret = PTR_ERR(pdata);
return ret;
}
- pdata->device_type = sec_pmic->type;
+ pdata->device_type = device_type;
}
if (pdata) {
sec_pmic->device_type = pdata->device_type;
@@ -298,39 +284,21 @@ static int sec_pmic_probe(struct i2c_client *i2c,
switch (sec_pmic->device_type) {
case S2MPA01:
regmap = &s2mpa01_regmap_config;
- /*
- * The rtc-s5m driver does not support S2MPA01 and there
- * is no mfd_cell for S2MPA01 RTC device.
- * However we must pass something to devm_regmap_init_i2c()
- * so use S5M-like regmap config even though it wouldn't work.
- */
- regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS11X:
regmap = &s2mps11_regmap_config;
- /*
- * The rtc-s5m driver does not support S2MPS11 and there
- * is no mfd_cell for S2MPS11 RTC device.
- * However we must pass something to devm_regmap_init_i2c()
- * so use S5M-like regmap config even though it wouldn't work.
- */
- regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
- regmap_rtc = &s2mps14_rtc_regmap_config;
break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
- regmap_rtc = &s5m_rtc_regmap_config;
break;
case S5M8767X:
regmap = &s5m8767_regmap_config;
- regmap_rtc = &s5m_rtc_regmap_config;
break;
default:
regmap = &sec_regmap_config;
- regmap_rtc = &s5m_rtc_regmap_config;
break;
}
@@ -342,21 +310,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
return ret;
}
- sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
- if (!sec_pmic->rtc) {
- dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n");
- return -ENODEV;
- }
- i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
-
- sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
- if (IS_ERR(sec_pmic->regmap_rtc)) {
- ret = PTR_ERR(sec_pmic->regmap_rtc);
- dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
- ret);
- goto err_regmap_rtc;
- }
-
if (pdata && pdata->cfg_pmic_irq)
pdata->cfg_pmic_irq();
@@ -403,8 +356,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
err_mfd:
sec_irq_exit(sec_pmic);
-err_regmap_rtc:
- i2c_unregister_device(sec_pmic->rtc);
return ret;
}
@@ -414,7 +365,6 @@ static int sec_pmic_remove(struct i2c_client *i2c)
mfd_remove_devices(sec_pmic->dev);
sec_irq_exit(sec_pmic);
- i2c_unregister_device(sec_pmic->rtc);
return 0;
}
@@ -424,19 +374,18 @@ static int sec_pmic_suspend(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
enable_irq_wake(sec_pmic->irq);
- /*
- * PMIC IRQ must be disabled during suspend for RTC alarm
- * to work properly.
- * When device is woken up from suspend by RTC Alarm, an
- * interrupt occurs before resuming I2C bus controller.
- * The interrupt is handled by regmap_irq_thread which tries
- * to read RTC registers. This read fails (I2C is still
- * suspended) and RTC Alarm interrupt is disabled.
- */
- disable_irq(sec_pmic->irq);
- }
+ /*
+ * PMIC IRQ must be disabled during suspend for RTC alarm
+ * to work properly.
+ * When device is woken up from suspend, an
+ * interrupt occurs before resuming I2C bus controller.
+ * The interrupt is handled by regmap_irq_thread which tries
+ * to read RTC registers. This read fails (I2C is still
+ * suspended) and RTC Alarm interrupt is disabled.
+ */
+ disable_irq(sec_pmic->irq);
return 0;
}
@@ -446,10 +395,9 @@ static int sec_pmic_resume(struct device *dev)
struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
- if (device_may_wakeup(dev)) {
+ if (device_may_wakeup(dev))
disable_irq_wake(sec_pmic->irq);
- enable_irq(sec_pmic->irq);
- }
+ enable_irq(sec_pmic->irq);
return 0;
}
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 64e7913aadc6..654e2c1dbf7a 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -385,7 +385,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
&sec_pmic->irq_data);
break;
default:
- dev_err(sec_pmic->dev, "Unknown device type %d\n",
+ dev_err(sec_pmic->dev, "Unknown device type %lu\n",
sec_pmic->device_type);
return -EINVAL;
}
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index e7dc441a8f8a..81e6d0932bf0 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1726,7 +1726,7 @@ static struct pci_driver sm501_pci_driver = {
MODULE_ALIAS("platform:sm501");
-static struct of_device_id of_sm501_match_tbl[] = {
+static const struct of_device_id of_sm501_match_tbl[] = {
{ .compatible = "smi,sm501", },
{ /* end */ }
};
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 0da02e11d58e..a45f9c0a330a 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/of_device.h>
#include "stmpe.h"
static int i2c_reg_read(struct stmpe *stmpe, u8 reg)
@@ -52,15 +53,41 @@ static struct stmpe_client_info i2c_ci = {
.write_block = i2c_block_write,
};
+static const struct of_device_id stmpe_of_match[] = {
+ { .compatible = "st,stmpe610", .data = (void *)STMPE610, },
+ { .compatible = "st,stmpe801", .data = (void *)STMPE801, },
+ { .compatible = "st,stmpe811", .data = (void *)STMPE811, },
+ { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
+ { .compatible = "st,stmpe1801", .data = (void *)STMPE1801, },
+ { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
+ { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stmpe_of_match);
+
static int
stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
+ int partnum;
+ const struct of_device_id *of_id;
+
i2c_ci.data = (void *)id;
i2c_ci.irq = i2c->irq;
i2c_ci.client = i2c;
i2c_ci.dev = &i2c->dev;
- return stmpe_probe(&i2c_ci, id->driver_data);
+ of_id = of_match_device(stmpe_of_match, &i2c->dev);
+ if (!of_id) {
+ /*
+ * This happens when the I2C ID matches the node name
+ * but no real compatible string has been given.
+ */
+ dev_info(&i2c->dev, "matching on node name, compatible is preferred\n");
+ partnum = id->driver_data;
+ } else
+ partnum = (int)of_id->data;
+
+ return stmpe_probe(&i2c_ci, partnum);
}
static int stmpe_i2c_remove(struct i2c_client *i2c)
@@ -89,6 +116,7 @@ static struct i2c_driver stmpe_i2c_driver = {
#ifdef CONFIG_PM
.pm = &stmpe_dev_pm_ops,
#endif
+ .of_match_table = stmpe_of_match,
},
.probe = stmpe_i2c_probe,
.remove = stmpe_i2c_remove,
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 4a91f6771fb8..3b6bfa7184ad 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/mfd/core.h>
#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#include "stmpe.h"
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -605,9 +606,18 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
if (blocks & STMPE_BLOCK_GPIO)
mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
+ else
+ mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
if (blocks & STMPE_BLOCK_KEYPAD)
mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
+ else
+ mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
+
+ if (blocks & STMPE_BLOCK_PWM)
+ mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
+ else
+ mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
enable ? mask : 0);
@@ -986,9 +996,6 @@ static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
int base = 0;
int num_irqs = stmpe->variant->num_irqs;
- if (!np)
- base = stmpe->irq_base;
-
stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
&stmpe_irq_ops, stmpe);
if (!stmpe->domain) {
@@ -1067,7 +1074,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
{
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
- NULL, stmpe->irq_base, stmpe->domain);
+ NULL, 0, stmpe->domain);
}
static int stmpe_devices_init(struct stmpe *stmpe)
@@ -1171,12 +1178,23 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
stmpe->dev = ci->dev;
stmpe->client = ci->client;
stmpe->pdata = pdata;
- stmpe->irq_base = pdata->irq_base;
stmpe->ci = ci;
stmpe->partnum = partnum;
stmpe->variant = stmpe_variant_info[partnum];
stmpe->regs = stmpe->variant->regs;
stmpe->num_gpios = stmpe->variant->num_gpios;
+ stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
+ if (!IS_ERR(stmpe->vcc)) {
+ ret = regulator_enable(stmpe->vcc);
+ if (ret)
+ dev_warn(ci->dev, "failed to enable VCC supply\n");
+ }
+ stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
+ if (!IS_ERR(stmpe->vio)) {
+ ret = regulator_enable(stmpe->vio);
+ if (ret)
+ dev_warn(ci->dev, "failed to enable VIO supply\n");
+ }
dev_set_drvdata(stmpe->dev, stmpe);
if (ci->init)
@@ -1243,6 +1261,11 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
int stmpe_remove(struct stmpe *stmpe)
{
+ if (!IS_ERR(stmpe->vio))
+ regulator_disable(stmpe->vio);
+ if (!IS_ERR(stmpe->vcc))
+ regulator_disable(stmpe->vcc);
+
mfd_remove_devices(stmpe->dev);
return 0;
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 6639f1b0fef5..9e4d21d37a11 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -192,7 +192,7 @@ int stmpe_remove(struct stmpe *stmpe);
#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
#define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
-#define STMPE1601_SYSCON_ENABLE_SPWM (1 << 0)
+#define STMPE1601_SYS_CTRL_ENABLE_SPWM (1 << 0)
/* The 1601/2403 share the same masks */
#define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
new file mode 100644
index 000000000000..718fc4d2adc0
--- /dev/null
+++ b/drivers/mfd/sun6i-prcm.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner PRCM (Power/Reset/Clock Management) driver
+ *
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+struct prcm_data {
+ int nsubdevs;
+ const struct mfd_cell *subdevs;
+};
+
+static const struct resource sun6i_a31_ar100_clk_res[] = {
+ {
+ .start = 0x0,
+ .end = 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct resource sun6i_a31_apb0_clk_res[] = {
+ {
+ .start = 0xc,
+ .end = 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
+ {
+ .start = 0x28,
+ .end = 0x2b,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct resource sun6i_a31_apb0_rstc_res[] = {
+ {
+ .start = 0xb0,
+ .end = 0xb3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static const struct mfd_cell sun6i_a31_prcm_subdevs[] = {
+ {
+ .name = "sun6i-a31-ar100-clk",
+ .of_compatible = "allwinner,sun6i-a31-ar100-clk",
+ .num_resources = ARRAY_SIZE(sun6i_a31_ar100_clk_res),
+ .resources = sun6i_a31_ar100_clk_res,
+ },
+ {
+ .name = "sun6i-a31-apb0-clk",
+ .of_compatible = "allwinner,sun6i-a31-apb0-clk",
+ .num_resources = ARRAY_SIZE(sun6i_a31_apb0_clk_res),
+ .resources = sun6i_a31_apb0_clk_res,
+ },
+ {
+ .name = "sun6i-a31-apb0-gates-clk",
+ .of_compatible = "allwinner,sun6i-a31-apb0-gates-clk",
+ .num_resources = ARRAY_SIZE(sun6i_a31_apb0_gates_clk_res),
+ .resources = sun6i_a31_apb0_gates_clk_res,
+ },
+ {
+ .name = "sun6i-a31-apb0-clock-reset",
+ .of_compatible = "allwinner,sun6i-a31-clock-reset",
+ .num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res),
+ .resources = sun6i_a31_apb0_rstc_res,
+ },
+};
+
+static const struct prcm_data sun6i_a31_prcm_data = {
+ .nsubdevs = ARRAY_SIZE(sun6i_a31_prcm_subdevs),
+ .subdevs = sun6i_a31_prcm_subdevs,
+};
+
+static const struct of_device_id sun6i_prcm_dt_ids[] = {
+ {
+ .compatible = "allwinner,sun6i-a31-prcm",
+ .data = &sun6i_a31_prcm_data,
+ },
+ { /* sentinel */ },
+};
+
+static int sun6i_prcm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ const struct prcm_data *data;
+ struct resource *res;
+ int ret;
+
+ match = of_match_node(sun6i_prcm_dt_ids, np);
+ if (!match)
+ return -EINVAL;
+
+ data = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no prcm memory region provided\n");
+ return -ENOENT;
+ }
+
+ ret = mfd_add_devices(&pdev->dev, 0, data->subdevs, data->nsubdevs,
+ res, -1, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add subdevices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver sun6i_prcm_driver = {
+ .driver = {
+ .name = "sun6i-prcm",
+ .owner = THIS_MODULE,
+ .of_match_table = sun6i_prcm_dt_ids,
+ },
+ .probe = sun6i_prcm_probe,
+};
+module_platform_driver(sun6i_prcm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sun6i PRCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index e2a04bb8bc1e..ca15878ce5c0 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -95,7 +95,11 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
struct device_node *syscon_np;
struct regmap *regmap;
- syscon_np = of_parse_phandle(np, property, 0);
+ if (property)
+ syscon_np = of_parse_phandle(np, property, 0);
+ else
+ syscon_np = np;
+
if (!syscon_np)
return ERR_PTR(-ENODEV);
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
index 3b27482a174f..a2e1990c9de7 100644
--- a/drivers/mfd/tps6507x.c
+++ b/drivers/mfd/tps6507x.c
@@ -119,7 +119,7 @@ static const struct i2c_device_id tps6507x_i2c_id[] = {
MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id);
#ifdef CONFIG_OF
-static struct of_device_id tps6507x_of_match[] = {
+static const struct of_device_id tps6507x_of_match[] = {
{.compatible = "ti,tps6507x", },
{},
};
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
index a74bfb59f18f..0d256cb002eb 100644
--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -197,6 +197,7 @@ static struct regmap_irq_chip tps65218_irq_chip = {
static const struct of_device_id of_tps65218_match_table[] = {
{ .compatible = "ti,tps65218", },
+ {}
};
static int tps65218_probe(struct i2c_client *client,
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 835e5549ecdd..8e1dbc469580 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -444,7 +444,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien
return pdata;
}
-static struct of_device_id tps6586x_of_match[] = {
+static const struct of_device_id tps6586x_of_match[] = {
{ .compatible = "ti,tps6586x", },
{ },
};
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 460a014ca629..f9e42ea1cb1a 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -379,7 +379,7 @@ err_sleep_init:
}
#ifdef CONFIG_OF
-static struct of_device_id tps65910_of_match[] = {
+static const struct of_device_id tps65910_of_match[] = {
{ .compatible = "ti,tps65910", .data = (void *)TPS65910},
{ .compatible = "ti,tps65911", .data = (void *)TPS65911},
{ },
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index 6e88f25832fb..ae26d84b3a59 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -87,8 +87,13 @@ static struct reg_default twl6040_defaults[] = {
};
static struct reg_default twl6040_patch[] = {
- /* Select I2C bus access to dual access registers */
- { TWL6040_REG_ACCCTL, 0x09 },
+ /*
+ * Select I2C bus access to dual access registers
+ * Interrupt register is cleared on read
+ * Select fast mode for i2c (400KHz)
+ */
+ { TWL6040_REG_ACCCTL,
+ TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
};
@@ -286,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
if (twl6040->power_count++)
goto out;
+ clk_prepare_enable(twl6040->clk32k);
+
/* Allow writes to the chip */
regcache_cache_only(twl6040->regmap, false);
@@ -341,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
twl6040->sysclk = 0;
twl6040->mclk = 0;
+
+ clk_disable_unprepare(twl6040->clk32k);
}
out:
@@ -432,12 +441,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
TWL6040_HPLLENA;
break;
case 19200000:
- /*
- * PLL disabled
- * (enable PLL if MCLK jitter quality
- * doesn't meet specification)
- */
- hppllctl |= TWL6040_MCLK_19200KHZ;
+ /* PLL enabled, bypass mode */
+ hppllctl |= TWL6040_MCLK_19200KHZ |
+ TWL6040_HPLLBP | TWL6040_HPLLENA;
break;
case 26000000:
/* PLL enabled, active mode */
@@ -445,9 +451,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
TWL6040_HPLLENA;
break;
case 38400000:
- /* PLL enabled, active mode */
+ /* PLL enabled, bypass mode */
hppllctl |= TWL6040_MCLK_38400KHZ |
- TWL6040_HPLLENA;
+ TWL6040_HPLLBP | TWL6040_HPLLENA;
break;
default:
dev_err(twl6040->dev,
@@ -639,6 +645,12 @@ static int twl6040_probe(struct i2c_client *client,
i2c_set_clientdata(client, twl6040);
+ twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
+ if (IS_ERR(twl6040->clk32k)) {
+ dev_info(&client->dev, "clk32k is not handled\n");
+ twl6040->clk32k = NULL;
+ }
+
twl6040->supplies[0].supply = "vio";
twl6040->supplies[1].supply = "v2v1";
ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
@@ -660,6 +672,9 @@ static int twl6040_probe(struct i2c_client *client,
mutex_init(&twl6040->mutex);
init_completion(&twl6040->ready);
+ regmap_register_patch(twl6040->regmap, twl6040_patch,
+ ARRAY_SIZE(twl6040_patch));
+
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
if (twl6040->rev < 0) {
dev_err(&client->dev, "Failed to read revision register: %d\n",
@@ -679,6 +694,9 @@ static int twl6040_probe(struct i2c_client *client,
GPIOF_OUT_INIT_LOW, "audpwron");
if (ret)
goto gpio_err;
+
+ /* Clear any pending interrupt */
+ twl6040_reg_read(twl6040, TWL6040_REG_INTID);
}
ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
@@ -707,10 +725,6 @@ static int twl6040_probe(struct i2c_client *client,
goto readyirq_err;
}
- /* dual-access registers controlled by I2C only */
- regmap_register_patch(twl6040->regmap, twl6040_patch,
- ARRAY_SIZE(twl6040_patch));
-
/*
* The main functionality of twl6040 to provide audio on OMAP4+ systems.
* We can add the ASoC codec child whenever this driver has been loaded.
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 070f8cfbbd7a..c8a993bd17ae 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -333,7 +333,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */
{ 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */
{ 0x00000210, 0x00D4 }, /* R528 - LDO1 Control 1 */
- { 0x00000212, 0x0001 }, /* R530 - LDO1 Control 2 */
+ { 0x00000212, 0x0000 }, /* R530 - LDO1 Control 2 */
{ 0x00000213, 0x0344 }, /* R531 - LDO2 Control 1 */
{ 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
@@ -1037,6 +1037,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8:
case ARIZONA_COMFORT_NOISE_GENERATOR:
case ARIZONA_HAPTICS_CONTROL_1:
case ARIZONA_HAPTICS_CONTROL_2:
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 1942b6f231da..41a7f6fb7802 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -468,10 +468,12 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */
{ 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */
{ 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */
- { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */
- { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */
- { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */
- { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */
+ { 0x00000066, 0x01FF }, /* R102 - Always On Triggers Sequence Select 1 */
+ { 0x00000067, 0x01FF }, /* R103 - Always On Triggers Sequence Select 2 */
+ { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */
+ { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
+ { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
+ { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
{ 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
@@ -549,6 +551,7 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */
{ 0x000002A9, 0x300A }, /* R681 - Mic Detect Level 4 */
{ 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */
+ { 0x000002CB, 0x0000 }, /* R715 - Isolation control */
{ 0x000002D3, 0x0000 }, /* R723 - Jack detect analogue */
{ 0x00000300, 0x0000 }, /* R768 - Input Enables */
{ 0x00000308, 0x0000 }, /* R776 - Input Rate */
@@ -1498,6 +1501,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
case ARIZONA_COMFORT_NOISE_GENERATOR:
case ARIZONA_HAPTICS_CONTROL_1:
case ARIZONA_HAPTICS_CONTROL_2:
@@ -1580,6 +1585,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_DETECT_LEVEL_3:
case ARIZONA_MIC_DETECT_LEVEL_4:
case ARIZONA_MIC_NOISE_MIX_CONTROL_1:
+ case ARIZONA_ISOLATION_CONTROL:
case ARIZONA_JACK_DETECT_ANALOGUE:
case ARIZONA_INPUT_ENABLES:
case ARIZONA_INPUT_ENABLES_STATUS:
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index e5eae751aa1b..c6fb5d16ca09 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -64,7 +64,7 @@ EXPORT_SYMBOL_GPL(wm8400_block_read);
static int wm8400_register_codec(struct wm8400 *wm8400)
{
- struct mfd_cell cell = {
+ const struct mfd_cell cell = {
.name = "wm8400-codec",
.platform_data = wm8400,
.pdata_size = sizeof(*wm8400),
diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c
index 5aa807687777..c7a81da64ee1 100644
--- a/drivers/mfd/wm8997-tables.c
+++ b/drivers/mfd/wm8997-tables.c
@@ -174,10 +174,10 @@ static const struct reg_default wm8997_reg_default[] = {
{ 0x00000062, 0x01FF }, /* R98 - Sample Rate Sequence Select 2 */
{ 0x00000063, 0x01FF }, /* R99 - Sample Rate Sequence Select 3 */
{ 0x00000064, 0x01FF }, /* R100 - Sample Rate Sequence Select 4 */
- { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 1 */
- { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 2 */
- { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 3 */
- { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 4 */
+ { 0x00000068, 0x01FF }, /* R104 - Always On Triggers Sequence Select 3 */
+ { 0x00000069, 0x01FF }, /* R105 - Always On Triggers Sequence Select 4 */
+ { 0x0000006A, 0x01FF }, /* R106 - Always On Triggers Sequence Select 5 */
+ { 0x0000006B, 0x01FF }, /* R107 - Always On Triggers Sequence Select 6 */
{ 0x00000070, 0x0000 }, /* R112 - Comfort Noise Generator */
{ 0x00000090, 0x0000 }, /* R144 - Haptics Control 1 */
{ 0x00000091, 0x7FFF }, /* R145 - Haptics Control 2 */
@@ -814,10 +814,10 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3:
case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4:
- case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1:
- case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3:
case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
+ case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
case ARIZONA_COMFORT_NOISE_GENERATOR:
case ARIZONA_HAPTICS_CONTROL_1:
case ARIZONA_HAPTICS_CONTROL_2:
@@ -846,6 +846,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_RATE_ESTIMATOR_3:
case ARIZONA_RATE_ESTIMATOR_4:
case ARIZONA_RATE_ESTIMATOR_5:
+ case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
case ARIZONA_FLL1_CONTROL_1:
case ARIZONA_FLL1_CONTROL_2:
case ARIZONA_FLL1_CONTROL_3:
@@ -880,6 +881,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_GPIO_CLOCK:
case ARIZONA_MIC_CHARGE_PUMP_1:
case ARIZONA_LDO1_CONTROL_1:
+ case ARIZONA_LDO1_CONTROL_2:
case ARIZONA_LDO2_CONTROL_1:
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2: