summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
authorRomain Izard <romain.izard.pro@gmail.com>2017-12-12 19:21:19 +0300
committerLee Jones <lee.jones@linaro.org>2018-01-08 14:03:35 +0300
commit7fdec11015c374a6f0b29ceccf35f559c2208042 (patch)
tree5807f61ff756b297983767f7b92b11e8c5429709 /drivers/mfd
parent63fb9cb51da257e48af9db6bbfe4ace8ade04ff3 (diff)
downloadlinux-7fdec11015c374a6f0b29ceccf35f559c2208042.tar.xz
atmel_flexcom: Support resuming after a chip reset
The controller used by a flexcom module is configured at boot, and left alone after this. In the suspend mode called "backup with self-refresh" available on SAMA5D2, the chip will resume with most of its registers reset. In this case, we need to restore the state of the flexcom driver on resume. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/atmel-flexcom.c63
1 files changed, 48 insertions, 15 deletions
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index 064bde9cff5a..f684a93a3340 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -39,34 +39,43 @@
#define FLEX_MR_OPMODE(opmode) (((opmode) << FLEX_MR_OPMODE_OFFSET) & \
FLEX_MR_OPMODE_MASK)
+struct atmel_flexcom {
+ void __iomem *base;
+ u32 opmode;
+ struct clk *clk;
+};
static int atmel_flexcom_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct clk *clk;
struct resource *res;
- void __iomem *base;
- u32 opmode;
+ struct atmel_flexcom *ddata;
int err;
- err = of_property_read_u32(np, "atmel,flexcom-mode", &opmode);
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+
+ err = of_property_read_u32(np, "atmel,flexcom-mode", &ddata->opmode);
if (err)
return err;
- if (opmode < ATMEL_FLEXCOM_MODE_USART ||
- opmode > ATMEL_FLEXCOM_MODE_TWI)
+ if (ddata->opmode < ATMEL_FLEXCOM_MODE_USART ||
+ ddata->opmode > ATMEL_FLEXCOM_MODE_TWI)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ ddata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ddata->base))
+ return PTR_ERR(ddata->base);
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ ddata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ddata->clk))
+ return PTR_ERR(ddata->clk);
- err = clk_prepare_enable(clk);
+ err = clk_prepare_enable(ddata->clk);
if (err)
return err;
@@ -76,9 +85,9 @@ static int atmel_flexcom_probe(struct platform_device *pdev)
* inaccessible and are read as zero. Also the external I/O lines of the
* Flexcom are muxed to reach the selected device.
*/
- writel(FLEX_MR_OPMODE(opmode), base + FLEX_MR);
+ writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + FLEX_MR);
- clk_disable_unprepare(clk);
+ clk_disable_unprepare(ddata->clk);
return devm_of_platform_populate(&pdev->dev);
}
@@ -89,10 +98,34 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
+#ifdef CONFIG_PM_SLEEP
+static int atmel_flexcom_resume(struct device *dev)
+{
+ struct atmel_flexcom *ddata = dev_get_drvdata(dev);
+ int err;
+ u32 val;
+
+ err = clk_prepare_enable(ddata->clk);
+ if (err)
+ return err;
+
+ val = FLEX_MR_OPMODE(ddata->opmode),
+ writel(val, ddata->base + FLEX_MR);
+
+ clk_disable_unprepare(ddata->clk);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
+ atmel_flexcom_resume);
+
static struct platform_driver atmel_flexcom_driver = {
.probe = atmel_flexcom_probe,
.driver = {
.name = "atmel_flexcom",
+ .pm = &atmel_flexcom_pm_ops,
.of_match_table = atmel_flexcom_of_match,
},
};