summaryrefslogtreecommitdiff
path: root/drivers/misc
diff options
context:
space:
mode:
authorWolfram Sang <wsa@the-dreams.de>2017-10-26 23:24:15 +0300
committerWolfram Sang <wsa@the-dreams.de>2017-10-26 23:24:15 +0300
commit3990bedea6e96cb1f182dbeadd62215dbb9e1c85 (patch)
tree90ac0ab8ae1d4339dc17eb42a853042ea06d6b13 /drivers/misc
parent631de7a4603439eaa1d7a2a1a7b5b49edcd87f67 (diff)
parent3997fb74846f35d0364c5e88e54bc9b166d5a1bc (diff)
downloadlinux-3990bedea6e96cb1f182dbeadd62215dbb9e1c85.tar.xz
Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.15
This cycle has been real quiet for me. There's only the one trivial patch that somewhat simplifies DT parsing in the i2c-mux-reg driver.
Diffstat (limited to 'drivers/misc')
-rw-r--r--drivers/misc/cxl/cxllib.c13
-rw-r--r--drivers/misc/mei/hw-me-regs.h2
-rw-r--r--drivers/misc/mei/pci-me.c23
-rw-r--r--drivers/misc/mei/pci-txe.c30
4 files changed, 37 insertions, 31 deletions
diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
index 5dba23ca2e5f..dc9bc1807fdf 100644
--- a/drivers/misc/cxl/cxllib.c
+++ b/drivers/misc/cxl/cxllib.c
@@ -219,8 +219,17 @@ int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags)
down_read(&mm->mmap_sem);
- for (dar = addr; dar < addr + size; dar += page_size) {
- if (!vma || dar < vma->vm_start || dar > vma->vm_end) {
+ vma = find_vma(mm, addr);
+ if (!vma) {
+ pr_err("Can't find vma for addr %016llx\n", addr);
+ rc = -EFAULT;
+ goto out;
+ }
+ /* get the size of the pages allocated */
+ page_size = vma_kernel_pagesize(vma);
+
+ for (dar = (addr & ~(page_size - 1)); dar < (addr + size); dar += page_size) {
+ if (dar < vma->vm_start || dar >= vma->vm_end) {
vma = find_vma(mm, addr);
if (!vma) {
pr_err("Can't find vma for addr %016llx\n", addr);
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index c8307e8b4c16..0ccccbaf530d 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -127,6 +127,8 @@
#define MEI_DEV_ID_BXT_M 0x1A9A /* Broxton M */
#define MEI_DEV_ID_APL_I 0x5A9A /* Apollo Lake I */
+#define MEI_DEV_ID_GLK 0x319A /* Gemini Lake */
+
#define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */
#define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 4ff40d319676..78b3172c8e6e 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -93,6 +93,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_GLK, MEI_ME_PCH8_CFG)},
+
{MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
@@ -226,12 +228,15 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
/*
- * For not wake-able HW runtime pm framework
- * can't be used on pci device level.
- * Use domain runtime pm callbacks instead.
- */
- if (!pci_dev_run_wake(pdev))
- mei_me_set_pm_domain(dev);
+ * ME maps runtime suspend/resume to D0i states,
+ * hence we need to go around native PCI runtime service which
+ * eventually brings the device into D3cold/hot state,
+ * but the mei device cannot wake up from D3 unlike from D0i3.
+ * To get around the PCI device native runtime pm,
+ * ME uses runtime pm domain handlers which take precedence
+ * over the driver's pm handlers.
+ */
+ mei_me_set_pm_domain(dev);
if (mei_pg_is_enabled(dev))
pm_runtime_put_noidle(&pdev->dev);
@@ -271,8 +276,7 @@ static void mei_me_shutdown(struct pci_dev *pdev)
dev_dbg(&pdev->dev, "shutdown\n");
mei_stop(dev);
- if (!pci_dev_run_wake(pdev))
- mei_me_unset_pm_domain(dev);
+ mei_me_unset_pm_domain(dev);
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
@@ -300,8 +304,7 @@ static void mei_me_remove(struct pci_dev *pdev)
dev_dbg(&pdev->dev, "stop\n");
mei_stop(dev);
- if (!pci_dev_run_wake(pdev))
- mei_me_unset_pm_domain(dev);
+ mei_me_unset_pm_domain(dev);
mei_disable_interrupts(dev);
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index e38a5f144373..0566f9bfa7de 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -144,12 +144,14 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
/*
- * For not wake-able HW runtime pm framework
- * can't be used on pci device level.
- * Use domain runtime pm callbacks instead.
- */
- if (!pci_dev_run_wake(pdev))
- mei_txe_set_pm_domain(dev);
+ * TXE maps runtime suspend/resume to own power gating states,
+ * hence we need to go around native PCI runtime service which
+ * eventually brings the device into D3cold/hot state.
+ * But the TXE device cannot wake up from D3 unlike from own
+ * power gating. To get around PCI device native runtime pm,
+ * TXE uses runtime pm domain handlers which take precedence.
+ */
+ mei_txe_set_pm_domain(dev);
pm_runtime_put_noidle(&pdev->dev);
@@ -186,8 +188,7 @@ static void mei_txe_shutdown(struct pci_dev *pdev)
dev_dbg(&pdev->dev, "shutdown\n");
mei_stop(dev);
- if (!pci_dev_run_wake(pdev))
- mei_txe_unset_pm_domain(dev);
+ mei_txe_unset_pm_domain(dev);
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
@@ -215,8 +216,7 @@ static void mei_txe_remove(struct pci_dev *pdev)
mei_stop(dev);
- if (!pci_dev_run_wake(pdev))
- mei_txe_unset_pm_domain(dev);
+ mei_txe_unset_pm_domain(dev);
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
@@ -318,15 +318,7 @@ static int mei_txe_pm_runtime_suspend(struct device *device)
else
ret = -EAGAIN;
- /*
- * If everything is okay we're about to enter PCI low
- * power state (D3) therefor we need to disable the
- * interrupts towards host.
- * However if device is not wakeable we do not enter
- * D-low state and we need to keep the interrupt kicking
- */
- if (!ret && pci_dev_run_wake(pdev))
- mei_disable_interrupts(dev);
+ /* keep irq on we are staying in D0 */
dev_dbg(&pdev->dev, "rpm: txe: runtime suspend ret=%d\n", ret);