summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2019-12-17 17:39:52 +0300
committerUlf Hansson <ulf.hansson@linaro.org>2019-12-18 16:55:11 +0300
commit2253ed4b36dc876d1598c4dab5587e537ec68c34 (patch)
treeaf2e1bcca75b1524e144941c1cdd00de66bf3b13 /drivers/mmc
parent67d7d920b3f0dc72651945ba6256e7777a5fe4d1 (diff)
downloadlinux-2253ed4b36dc876d1598c4dab5587e537ec68c34.tar.xz
mmc: mmci: Support any block sizes for ux500v2 and qcom variant
For the ux500v2 variant of the PL18x block, any block sizes are supported. This is necessary to support some SDIO transfers. This also affects the QCOM MMCI variant and the ST micro variant. For Ux500 an additional quirk only allowing DMA on blocks that are a power of two is needed. This might be a bug in the DMA engine (DMA40) or the MMCI or in the interconnect, but the most likely is the MMCI, as transfers of these sizes work fine for other devices using the same DMA engine. DMA works fine also with SDIO as long as the blocksize is a power of 2. This patch has proven necessary for enabling SDIO for WLAN on PostmarketOS-based Ux500 platforms. What we managed to test in practice is Broadcom WiFi over SDIO on the Ux500 based Samsung GT-I8190 and GT-S7710. This WiFi chip, BCM4334 works fine after the patch. Before this patch: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4334-sdio for chip BCM4334/3 mmci-pl18x 80118000.sdi1_per2: unsupported block size (60 bytes) brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed brcmfmac: brcmf_sdio_download_code_file: error -22 on writing 434236 membytes at 0x00000000 brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed After this patch: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4334/3 wl0: Nov 21 2012 00:21:28 version 6.10.58.813 (B2) FWID 01-0 Bringing up networks, discovering networks with "iw dev wlan0 scan" and connecting works fine from this point. This patch is inspired by Ulf Hansson's patch http://www.spinics.net/lists/linux-mmc/msg12160.html As the DMA engines on these platforms may now get block sizes they were not used to before, make sure to also respect if the DMA engine says "no" to a transfer. Make a drive-by fix for datactrl_blocksz, misspelled. Cc: Ludovic Barre <ludovic.barre@st.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Niklas Cassel <niklas.cassel@linaro.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191217143952.2885-1-linus.walleij@linaro.org
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/mmci.c34
-rw-r--r--drivers/mmc/host/mmci.h8
2 files changed, 37 insertions, 5 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index b2b6dafa3bc3..7b13d66cbb21 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -169,6 +169,8 @@ static struct variant_data variant_ux500 = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_any_blocksz = true,
+ .dma_power_of_2 = true,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -202,6 +204,8 @@ static struct variant_data variant_ux500v2 = {
.datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_any_blocksz = true,
+ .dma_power_of_2 = true,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -261,6 +265,7 @@ static struct variant_data variant_stm32_sdmmc = {
.datacnt_useless = true,
.datalength_bits = 25,
.datactrl_blocksz = 14,
+ .datactrl_any_blocksz = true,
.stm32_idmabsize_mask = GENMASK(12, 5),
.busy_timeout = true,
.busy_detect = true,
@@ -284,6 +289,7 @@ static struct variant_data variant_qcom = {
.data_cmd_enable = MCI_CPSM_QCOM_DATCMD,
.datalength_bits = 24,
.datactrl_blocksz = 11,
+ .datactrl_any_blocksz = true,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 208000000,
.explicit_mclk_control = true,
@@ -452,10 +458,11 @@ static void mmci_dma_setup(struct mmci_host *host)
static int mmci_validate_data(struct mmci_host *host,
struct mmc_data *data)
{
+ struct variant_data *variant = host->variant;
+
if (!data)
return 0;
-
- if (!is_power_of_2(data->blksz)) {
+ if (!is_power_of_2(data->blksz) && !variant->datactrl_any_blocksz) {
dev_err(mmc_dev(host->mmc),
"unsupported block size (%d bytes)\n", data->blksz);
return -EINVAL;
@@ -520,7 +527,9 @@ static int mmci_dma_start(struct mmci_host *host, unsigned int datactrl)
"Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n",
data->sg_len, data->blksz, data->blocks, data->flags);
- host->ops->dma_start(host, &datactrl);
+ ret = host->ops->dma_start(host, &datactrl);
+ if (ret)
+ return ret;
/* Trigger the DMA transfer */
mmci_write_datactrlreg(host, datactrl);
@@ -888,6 +897,18 @@ static int _mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data,
if (data->blksz * data->blocks <= variant->fifosize)
return -EINVAL;
+ /*
+ * This is necessary to get SDIO working on the Ux500. We do not yet
+ * know if this is a bug in:
+ * - The Ux500 DMA controller (DMA40)
+ * - The MMCI DMA interface on the Ux500
+ * some power of two blocks (such as 64 bytes) are sent regularly
+ * during SDIO traffic and those work fine so for these we enable DMA
+ * transfers.
+ */
+ if (host->variant->dma_power_of_2 && !is_power_of_2(data->blksz))
+ return -EINVAL;
+
device = chan->device;
nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len,
mmc_get_dma_dir(data));
@@ -938,9 +959,14 @@ int mmci_dmae_prep_data(struct mmci_host *host,
int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl)
{
struct mmci_dmae_priv *dmae = host->dma_priv;
+ int ret;
host->dma_in_progress = true;
- dmaengine_submit(dmae->desc_current);
+ ret = dma_submit_error(dmaengine_submit(dmae->desc_current));
+ if (ret < 0) {
+ host->dma_in_progress = false;
+ return ret;
+ }
dma_async_issue_pending(dmae->cur);
*datactrl |= MCI_DPSM_DMAENABLE;
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index be6cd1df2bf3..ea6a0b5779d4 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -279,7 +279,11 @@ struct mmci_host;
* @stm32_clkdiv: true if using a STM32-specific clock divider algorithm
* @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
* @datactrl_mask_sdio: SDIO enable mask in datactrl register
- * @datactrl_blksz: block size in power of two
+ * @datactrl_blocksz: block size in power of two
+ * @datactrl_any_blocksz: true if block any block sizes are accepted by
+ * hardware, such as with some SDIO traffic that send
+ * odd packets.
+ * @dma_power_of_2: DMA only works with blocks that are a power of 2.
* @datactrl_first: true if data must be setup before send command
* @datacnt_useless: true if you could not use datacnt register to read
* remaining data
@@ -326,6 +330,8 @@ struct variant_data {
unsigned int datactrl_mask_ddrmode;
unsigned int datactrl_mask_sdio;
unsigned int datactrl_blocksz;
+ u8 datactrl_any_blocksz:1;
+ u8 dma_power_of_2:1;
u8 datactrl_first:1;
u8 datacnt_useless:1;
u8 st_sdio:1;