summaryrefslogtreecommitdiff
path: root/drivers/mmc
diff options
context:
space:
mode:
authorUlf Hansson <ulf.hansson@linaro.org>2019-01-29 17:35:56 +0300
committerUlf Hansson <ulf.hansson@linaro.org>2019-02-25 10:40:58 +0300
commite9968c6fa8e7852184135e84116c6c77ebb2987d (patch)
tree7395705d6e606227311214b39f4afaf82026b4cc /drivers/mmc
parente9d6a371cff3bb9bef8ad96fe576d62346c7e104 (diff)
downloadlinux-e9968c6fa8e7852184135e84116c6c77ebb2987d.tar.xz
mmc: mmci: Send a CMD12 to clear the DPSM at errors
The current approach with sending a CMD12 (STOP_TRANSMISSION) to complete a data transfer request, either because of using the open-ended transmission type or because of receiving an error during a pre-defined data transfer, isn't sufficient for the STM32 sdmmc variant. More precisely, this variant needs to clear the DPSM ("Data Path State Machine") by sending a CMD12, for all failing ADTC commands. Support this, by adding a struct mmc_command inside the struct mmci_host and initialize it to a CMD12 during ->probe(). Let's also add checks for the new conditions, to enable mmci_data_irq() and mmci_cmd_irq() to postpone the calls to mmci_request_end(), but instead send the CMD12. Cc: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Ludovic Barre <ludovic.barre@st.com>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/mmci.c25
-rw-r--r--drivers/mmc/host/mmci.h1
2 files changed, 24 insertions, 2 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7dd3ccf5baf0..387ff14587b8 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1127,6 +1127,12 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
writel(c, base + MMCICOMMAND);
}
+static void mmci_stop_command(struct mmci_host *host)
+{
+ host->stop_abort.error = 0;
+ mmci_start_command(host, &host->stop_abort, 0);
+}
+
static void
mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
unsigned int status)
@@ -1196,10 +1202,16 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
/* The error clause is handled above, success! */
data->bytes_xfered = data->blksz * data->blocks;
- if (!data->stop || (host->mrq->sbc && !data->error))
+ if (!data->stop) {
+ if (host->variant->cmdreg_stop && data->error)
+ mmci_stop_command(host);
+ else
+ mmci_request_end(host, data->mrq);
+ } else if (host->mrq->sbc && !data->error) {
mmci_request_end(host, data->mrq);
- else
+ } else {
mmci_start_command(host, data->stop, 0);
+ }
}
}
@@ -1298,6 +1310,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
mmci_dma_error(host);
mmci_stop_data(host);
+ if (host->variant->cmdreg_stop && cmd->error) {
+ mmci_stop_command(host);
+ return;
+ }
}
mmci_request_end(host, host->mrq);
} else if (sbc) {
@@ -1956,6 +1972,11 @@ static int mmci_probe(struct amba_device *dev,
mmc->max_busy_timeout = 0;
}
+ /* Prepare a CMD12 - needed to clear the DPSM on some variants. */
+ host->stop_abort.opcode = MMC_STOP_TRANSMISSION;
+ host->stop_abort.arg = 0;
+ host->stop_abort.flags = MMC_RSP_R1B | MMC_CMD_AC;
+
mmc->ops = &mmci_ops;
/* We support these PM capabilities. */
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 24229097d05c..14df81054438 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -377,6 +377,7 @@ struct mmci_host {
void __iomem *base;
struct mmc_request *mrq;
struct mmc_command *cmd;
+ struct mmc_command stop_abort;
struct mmc_data *data;
struct mmc_host *mmc;
struct clk *clk;