summaryrefslogtreecommitdiff
path: root/drivers/mtd/maps
diff options
context:
space:
mode:
authorArtem Bityutskiy <artem.bityutskiy@linux.intel.com>2013-03-11 20:10:06 +0400
committerDavid Woodhouse <David.Woodhouse@intel.com>2013-04-05 16:01:43 +0400
commitbece641c967a8fa76cae718daa46c36a0c298cc7 (patch)
tree70232902364dace79be4d23c20614e74f913a0af /drivers/mtd/maps
parenta312c87ab019bca1400e4082a14c3e1c3d8f884d (diff)
downloadlinux-bece641c967a8fa76cae718daa46c36a0c298cc7.tar.xz
mtd: remove the dilnetpc map driver support
This driver is marked as broken for very long time. Most probably this board is just something ancient no one cares about anyway. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd/maps')
-rw-r--r--drivers/mtd/maps/Kconfig16
-rw-r--r--drivers/mtd/maps/Makefile1
-rw-r--r--drivers/mtd/maps/dilnetpc.c496
3 files changed, 0 insertions, 513 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 888e6842b698..b6a369a07dbc 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -249,22 +249,6 @@ config MTD_LANTIQ
help
Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
-config MTD_DILNETPC
- tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_CFI_INTELEXT && BROKEN
- help
- MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
- For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
- and <http://www.ssv-embedded.de/ssv/pc104/p170.htm>
-
-config MTD_DILNETPC_BOOTSIZE
- hex "Size of DIL/Net PC flash boot partition"
- depends on MTD_DILNETPC
- default "0x80000"
- help
- The amount of space taken up by the kernel or Etherboot
- on the DIL/Net PC flash chips.
-
config MTD_L440GX
tristate "BIOS flash chip on Intel L440GX boards"
depends on X86 && MTD_JEDECPROBE
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 0cdc881fe262..7315ed8c9643 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -9,7 +9,6 @@ endif
# Chip mappings
obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
-obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o
obj-$(CONFIG_MTD_ESB2ROM) += esb2rom.o
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
deleted file mode 100644
index 3e393f0da823..000000000000
--- a/drivers/mtd/maps/dilnetpc.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/* dilnetpc.c -- MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP"
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
- * featuring the AMD Elan SC410 processor. There are two variants of this
- * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
- * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs
- * flash and 16 megs of RAM.
- * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm
- * and http://www.ssv-embedded.de/ssv/pc104/p170.htm
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <asm/io.h>
-
-/*
-** The DIL/NetPC keeps its BIOS in two distinct flash blocks.
-** Destroying any of these blocks transforms the DNPC into
-** a paperweight (albeit not a very useful one, considering
-** it only weighs a few grams).
-**
-** Therefore, the BIOS blocks must never be erased or written to
-** except by people who know exactly what they are doing (e.g.
-** to install a BIOS update). These partitions are marked read-only
-** by default, but can be made read/write by undefining
-** DNPC_BIOS_BLOCKS_WRITEPROTECTED:
-*/
-#define DNPC_BIOS_BLOCKS_WRITEPROTECTED
-
-/*
-** The ID string (in ROM) is checked to determine whether we
-** are running on a DNP/1486 or ADNP/1486
-*/
-#define BIOSID_BASE 0x000fe100
-
-#define ID_DNPC "DNP1486"
-#define ID_ADNP "ADNP1486"
-
-/*
-** Address where the flash should appear in CPU space
-*/
-#define FLASH_BASE 0x2000000
-
-/*
-** Chip Setup and Control (CSC) indexed register space
-*/
-#define CSC_INDEX 0x22
-#define CSC_DATA 0x23
-
-#define CSC_MMSWAR 0x30 /* MMS window C-F attributes register */
-#define CSC_MMSWDSR 0x31 /* MMS window C-F device select register */
-
-#define CSC_RBWR 0xa7 /* GPIO Read-Back/Write Register B */
-
-#define CSC_CR 0xd0 /* internal I/O device disable/Echo */
- /* Z-bus/configuration register */
-
-#define CSC_PCCMDCR 0xf1 /* PC card mode and DMA control register */
-
-
-/*
-** PC Card indexed register space:
-*/
-
-#define PCC_INDEX 0x3e0
-#define PCC_DATA 0x3e1
-
-#define PCC_AWER_B 0x46 /* Socket B Address Window enable register */
-#define PCC_MWSAR_1_Lo 0x58 /* memory window 1 start address low register */
-#define PCC_MWSAR_1_Hi 0x59 /* memory window 1 start address high register */
-#define PCC_MWEAR_1_Lo 0x5A /* memory window 1 stop address low register */
-#define PCC_MWEAR_1_Hi 0x5B /* memory window 1 stop address high register */
-#define PCC_MWAOR_1_Lo 0x5C /* memory window 1 address offset low register */
-#define PCC_MWAOR_1_Hi 0x5D /* memory window 1 address offset high register */
-
-
-/*
-** Access to SC4x0's Chip Setup and Control (CSC)
-** and PC Card (PCC) indexed registers:
-*/
-static inline void setcsc(int reg, unsigned char data)
-{
- outb(reg, CSC_INDEX);
- outb(data, CSC_DATA);
-}
-
-static inline unsigned char getcsc(int reg)
-{
- outb(reg, CSC_INDEX);
- return(inb(CSC_DATA));
-}
-
-static inline void setpcc(int reg, unsigned char data)
-{
- outb(reg, PCC_INDEX);
- outb(data, PCC_DATA);
-}
-
-static inline unsigned char getpcc(int reg)
-{
- outb(reg, PCC_INDEX);
- return(inb(PCC_DATA));
-}
-
-
-/*
-************************************************************
-** Enable access to DIL/NetPC's flash by mapping it into
-** the SC4x0's MMS Window C.
-************************************************************
-*/
-static void dnpc_map_flash(unsigned long flash_base, unsigned long flash_size)
-{
- unsigned long flash_end = flash_base + flash_size - 1;
-
- /*
- ** enable setup of MMS windows C-F:
- */
- /* - enable PC Card indexed register space */
- setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
- /* - set PC Card controller to operate in standard mode */
- setcsc(CSC_PCCMDCR, getcsc(CSC_PCCMDCR) & ~1);
-
- /*
- ** Program base address and end address of window
- ** where the flash ROM should appear in CPU address space
- */
- setpcc(PCC_MWSAR_1_Lo, (flash_base >> 12) & 0xff);
- setpcc(PCC_MWSAR_1_Hi, (flash_base >> 20) & 0x3f);
- setpcc(PCC_MWEAR_1_Lo, (flash_end >> 12) & 0xff);
- setpcc(PCC_MWEAR_1_Hi, (flash_end >> 20) & 0x3f);
-
- /* program offset of first flash location to appear in this window (0) */
- setpcc(PCC_MWAOR_1_Lo, ((0 - flash_base) >> 12) & 0xff);
- setpcc(PCC_MWAOR_1_Hi, ((0 - flash_base)>> 20) & 0x3f);
-
- /* set attributes for MMS window C: non-cacheable, write-enabled */
- setcsc(CSC_MMSWAR, getcsc(CSC_MMSWAR) & ~0x11);
-
- /* select physical device ROMCS0 (i.e. flash) for MMS Window C */
- setcsc(CSC_MMSWDSR, getcsc(CSC_MMSWDSR) & ~0x03);
-
- /* enable memory window 1 */
- setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) | 0x02);
-
- /* now disable PC Card indexed register space again */
- setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
-}
-
-
-/*
-************************************************************
-** Disable access to DIL/NetPC's flash by mapping it into
-** the SC4x0's MMS Window C.
-************************************************************
-*/
-static void dnpc_unmap_flash(void)
-{
- /* - enable PC Card indexed register space */
- setcsc(CSC_CR, getcsc(CSC_CR) | 0x2);
-
- /* disable memory window 1 */
- setpcc(PCC_AWER_B, getpcc(PCC_AWER_B) & ~0x02);
-
- /* now disable PC Card indexed register space again */
- setcsc(CSC_CR, getcsc(CSC_CR) & ~0x2);
-}
-
-
-
-/*
-************************************************************
-** Enable/Disable VPP to write to flash
-************************************************************
-*/
-
-static DEFINE_SPINLOCK(dnpc_spin);
-static int vpp_counter = 0;
-/*
-** This is what has to be done for the DNP board ..
-*/
-static void dnp_set_vpp(struct map_info *not_used, int on)
-{
- spin_lock_irq(&dnpc_spin);
-
- if (on)
- {
- if(++vpp_counter == 1)
- setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x4);
- }
- else
- {
- if(--vpp_counter == 0)
- setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x4);
- else
- BUG_ON(vpp_counter < 0);
- }
- spin_unlock_irq(&dnpc_spin);
-}
-
-/*
-** .. and this the ADNP version:
-*/
-static void adnp_set_vpp(struct map_info *not_used, int on)
-{
- spin_lock_irq(&dnpc_spin);
-
- if (on)
- {
- if(++vpp_counter == 1)
- setcsc(CSC_RBWR, getcsc(CSC_RBWR) & ~0x8);
- }
- else
- {
- if(--vpp_counter == 0)
- setcsc(CSC_RBWR, getcsc(CSC_RBWR) | 0x8);
- else
- BUG_ON(vpp_counter < 0);
- }
- spin_unlock_irq(&dnpc_spin);
-}
-
-
-
-#define DNP_WINDOW_SIZE 0x00200000 /* DNP flash size is 2MiB */
-#define ADNP_WINDOW_SIZE 0x00400000 /* ADNP flash size is 4MiB */
-#define WINDOW_ADDR FLASH_BASE
-
-static struct map_info dnpc_map = {
- .name = "ADNP Flash Bank",
- .size = ADNP_WINDOW_SIZE,
- .bankwidth = 1,
- .set_vpp = adnp_set_vpp,
- .phys = WINDOW_ADDR
-};
-
-/*
-** The layout of the flash is somewhat "strange":
-**
-** 1. 960 KiB (15 blocks) : Space for ROM Bootloader and user data
-** 2. 64 KiB (1 block) : System BIOS
-** 3. 960 KiB (15 blocks) : User Data (DNP model) or
-** 3. 3008 KiB (47 blocks) : User Data (ADNP model)
-** 4. 64 KiB (1 block) : System BIOS Entry
-*/
-
-static struct mtd_partition partition_info[]=
-{
- {
- .name = "ADNP boot",
- .offset = 0,
- .size = 0xf0000,
- },
- {
- .name = "ADNP system BIOS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x10000,
-#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
- .mask_flags = MTD_WRITEABLE,
-#endif
- },
- {
- .name = "ADNP file system",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x2f0000,
- },
- {
- .name = "ADNP system BIOS entry",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
-#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
- .mask_flags = MTD_WRITEABLE,
-#endif
- },
-};
-
-#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
-
-static struct mtd_info *mymtd;
-static struct mtd_info *lowlvl_parts[NUM_PARTITIONS];
-static struct mtd_info *merged_mtd;
-
-/*
-** "Highlevel" partition info:
-**
-** Using the MTD concat layer, we can re-arrange partitions to our
-** liking: we construct a virtual MTD device by concatenating the
-** partitions, specifying the sequence such that the boot block
-** is immediately followed by the filesystem block (i.e. the stupid
-** system BIOS block is mapped to a different place). When re-partitioning
-** this concatenated MTD device, we can set the boot block size to
-** an arbitrary (though erase block aligned) value i.e. not one that
-** is dictated by the flash's physical layout. We can thus set the
-** boot block to be e.g. 64 KB (which is fully sufficient if we want
-** to boot an etherboot image) or to -say- 1.5 MB if we want to boot
-** a large kernel image. In all cases, the remainder of the flash
-** is available as file system space.
-*/
-
-static struct mtd_partition higlvl_partition_info[]=
-{
- {
- .name = "ADNP boot block",
- .offset = 0,
- .size = CONFIG_MTD_DILNETPC_BOOTSIZE,
- },
- {
- .name = "ADNP file system space",
- .offset = MTDPART_OFS_NXTBLK,
- .size = ADNP_WINDOW_SIZE-CONFIG_MTD_DILNETPC_BOOTSIZE-0x20000,
- },
- {
- .name = "ADNP system BIOS + BIOS Entry",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
-#ifdef DNPC_BIOS_BLOCKS_WRITEPROTECTED
- .mask_flags = MTD_WRITEABLE,
-#endif
- },
-};
-
-#define NUM_HIGHLVL_PARTITIONS ARRAY_SIZE(higlvl_partition_info)
-
-
-static int dnp_adnp_probe(void)
-{
- char *biosid, rc = -1;
-
- biosid = (char*)ioremap(BIOSID_BASE, 16);
- if(biosid)
- {
- if(!strcmp(biosid, ID_DNPC))
- rc = 1; /* this is a DNPC */
- else if(!strcmp(biosid, ID_ADNP))
- rc = 0; /* this is a ADNPC */
- }
- iounmap((void *)biosid);
- return(rc);
-}
-
-
-static int __init init_dnpc(void)
-{
- int is_dnp;
-
- /*
- ** determine hardware (DNP/ADNP/invalid)
- */
- if((is_dnp = dnp_adnp_probe()) < 0)
- return -ENXIO;
-
- /*
- ** Things are set up for ADNP by default
- ** -> modify all that needs to be different for DNP
- */
- if(is_dnp)
- { /*
- ** Adjust window size, select correct set_vpp function.
- ** The partitioning scheme is identical on both DNP
- ** and ADNP except for the size of the third partition.
- */
- int i;
- dnpc_map.size = DNP_WINDOW_SIZE;
- dnpc_map.set_vpp = dnp_set_vpp;
- partition_info[2].size = 0xf0000;
-
- /*
- ** increment all string pointers so the leading 'A' gets skipped,
- ** thus turning all occurrences of "ADNP ..." into "DNP ..."
- */
- ++dnpc_map.name;
- for(i = 0; i < NUM_PARTITIONS; i++)
- ++partition_info[i].name;
- higlvl_partition_info[1].size = DNP_WINDOW_SIZE -
- CONFIG_MTD_DILNETPC_BOOTSIZE - 0x20000;
- for(i = 0; i < NUM_HIGHLVL_PARTITIONS; i++)
- ++higlvl_partition_info[i].name;
- }
-
- printk(KERN_NOTICE "DIL/Net %s flash: 0x%lx at 0x%llx\n",
- is_dnp ? "DNPC" : "ADNP", dnpc_map.size, (unsigned long long)dnpc_map.phys);
-
- dnpc_map.virt = ioremap_nocache(dnpc_map.phys, dnpc_map.size);
-
- dnpc_map_flash(dnpc_map.phys, dnpc_map.size);
-
- if (!dnpc_map.virt) {
- printk("Failed to ioremap_nocache\n");
- return -EIO;
- }
- simple_map_init(&dnpc_map);
-
- printk("FLASH virtual address: 0x%p\n", dnpc_map.virt);
-
- mymtd = do_map_probe("jedec_probe", &dnpc_map);
-
- if (!mymtd)
- mymtd = do_map_probe("cfi_probe", &dnpc_map);
-
- /*
- ** If flash probes fail, try to make flashes accessible
- ** at least as ROM. Ajust erasesize in this case since
- ** the default one (128M) will break our partitioning
- */
- if (!mymtd)
- if((mymtd = do_map_probe("map_rom", &dnpc_map)))
- mymtd->erasesize = 0x10000;
-
- if (!mymtd) {
- iounmap(dnpc_map.virt);
- return -ENXIO;
- }
-
- mymtd->owner = THIS_MODULE;
-
- /*
- ** Supply pointers to lowlvl_parts[] array to add_mtd_partitions()
- ** -> add_mtd_partitions() will _not_ register MTD devices for
- ** the partitions, but will instead store pointers to the MTD
- ** objects it creates into our lowlvl_parts[] array.
- ** NOTE: we arrange the pointers such that the sequence of the
- ** partitions gets re-arranged: partition #2 follows
- ** partition #0.
- */
- partition_info[0].mtdp = &lowlvl_parts[0];
- partition_info[1].mtdp = &lowlvl_parts[2];
- partition_info[2].mtdp = &lowlvl_parts[1];
- partition_info[3].mtdp = &lowlvl_parts[3];
-
- mtd_device_register(mymtd, partition_info, NUM_PARTITIONS);
-
- /*
- ** now create a virtual MTD device by concatenating the for partitions
- ** (in the sequence given by the lowlvl_parts[] array.
- */
- merged_mtd = mtd_concat_create(lowlvl_parts, NUM_PARTITIONS, "(A)DNP Flash Concatenated");
- if(merged_mtd)
- { /*
- ** now partition the new device the way we want it. This time,
- ** we do not supply mtd pointers in higlvl_partition_info, so
- ** add_mtd_partitions() will register the devices.
- */
- mtd_device_register(merged_mtd, higlvl_partition_info,
- NUM_HIGHLVL_PARTITIONS);
- }
-
- return 0;
-}
-
-static void __exit cleanup_dnpc(void)
-{
- if(merged_mtd) {
- mtd_device_unregister(merged_mtd);
- mtd_concat_destroy(merged_mtd);
- }
-
- if (mymtd) {
- mtd_device_unregister(mymtd);
- map_destroy(mymtd);
- }
- if (dnpc_map.virt) {
- iounmap(dnpc_map.virt);
- dnpc_unmap_flash();
- dnpc_map.virt = NULL;
- }
-}
-
-module_init(init_dnpc);
-module_exit(cleanup_dnpc);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
-MODULE_DESCRIPTION("MTD map driver for SSV DIL/NetPC DNP & ADNP");