summaryrefslogtreecommitdiff
path: root/drivers/net/arcnet/arcdevice.h
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2015-05-05 20:06:03 +0300
committerMichael Grzeschik <m.grzeschik@pengutronix.de>2015-09-23 09:44:25 +0300
commit26c6d281688e8bb8154fa78c60e551d024f5d0b8 (patch)
treeb61afb2d9e2cb016273145745453076e45a2706c /drivers/net/arcnet/arcdevice.h
parentd6d7d3ed56e3bfe7fd34108dbe23f0610e3d8621 (diff)
downloadlinux-26c6d281688e8bb8154fa78c60e551d024f5d0b8.tar.xz
arcnet: Move files out of include/linux
These #include files don't need to be in the include/linux directory as they can be local to drivers/net/arcnet/ Move them and update the #include statements. Update the MAINTAINERS file pattern by deleting arcdevice from the NETWORKING block as arcnet is currently unmaintained. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Diffstat (limited to 'drivers/net/arcnet/arcdevice.h')
-rw-r--r--drivers/net/arcnet/arcdevice.h346
1 files changed, 346 insertions, 0 deletions
diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h
new file mode 100644
index 000000000000..9ca135d0f114
--- /dev/null
+++ b/drivers/net/arcnet/arcdevice.h
@@ -0,0 +1,346 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. NET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions used by the ARCnet driver.
+ *
+ * Authors: Avery Pennarun and David Woodhouse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _LINUX_ARCDEVICE_H
+#define _LINUX_ARCDEVICE_H
+
+#include <asm/timex.h>
+#include <linux/if_arcnet.h>
+
+#ifdef __KERNEL__
+#include <linux/irqreturn.h>
+
+/*
+ * RECON_THRESHOLD is the maximum number of RECON messages to receive
+ * within one minute before printing a "cabling problem" warning. The
+ * default value should be fine.
+ *
+ * After that, a "cabling restored" message will be printed on the next IRQ
+ * if no RECON messages have been received for 10 seconds.
+ *
+ * Do not define RECON_THRESHOLD at all if you want to disable this feature.
+ */
+#define RECON_THRESHOLD 30
+
+/*
+ * Define this to the minimum "timeout" value. If a transmit takes longer
+ * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large
+ * network, or one with heavy network traffic, this timeout may need to be
+ * increased. The larger it is, though, the longer it will be between
+ * necessary transmits - don't set this too high.
+ */
+#define TX_TIMEOUT (HZ * 200 / 1000)
+
+/* Display warnings about the driver being an ALPHA version. */
+#undef ALPHA_WARNING
+
+/*
+ * Debugging bitflags: each option can be enabled individually.
+ *
+ * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
+ * actually be available. GCC will (at least, GCC 2.7.0 will) notice
+ * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
+ * them out.
+ */
+#define D_NORMAL 1 /* important operational info */
+#define D_EXTRA 2 /* useful, but non-vital information */
+#define D_INIT 4 /* show init/probe messages */
+#define D_INIT_REASONS 8 /* show reasons for discarding probes */
+#define D_RECON 32 /* print a message whenever token is lost */
+#define D_PROTO 64 /* debug auto-protocol support */
+/* debug levels below give LOTS of output during normal operation! */
+#define D_DURING 128 /* trace operations (including irq's) */
+#define D_TX 256 /* show tx packets */
+#define D_RX 512 /* show rx packets */
+#define D_SKB 1024 /* show skb's */
+#define D_SKB_SIZE 2048 /* show skb sizes */
+#define D_TIMING 4096 /* show time needed to copy buffers to card */
+#define D_DEBUG 8192 /* Very detailed debug line for line */
+
+#ifndef ARCNET_DEBUG_MAX
+#define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */
+#endif
+
+#ifndef ARCNET_DEBUG
+#define ARCNET_DEBUG (D_NORMAL | D_EXTRA)
+#endif
+extern int arcnet_debug;
+
+#define BUGLVL(x) ((x) & ARCNET_DEBUG_MAX & arcnet_debug)
+
+/* macros to simplify debug checking */
+#define arc_printk(x, dev, fmt, ...) \
+do { \
+ if (BUGLVL(x)) { \
+ if ((x) == D_NORMAL) \
+ netdev_warn(dev, fmt, ##__VA_ARGS__); \
+ else if ((x) < D_DURING) \
+ netdev_info(dev, fmt, ##__VA_ARGS__); \
+ else \
+ netdev_dbg(dev, fmt, ##__VA_ARGS__); \
+ } \
+} while (0)
+
+#define arc_cont(x, fmt, ...) \
+do { \
+ if (BUGLVL(x)) \
+ pr_cont(fmt, ##__VA_ARGS__); \
+} while (0)
+
+/* see how long a function call takes to run, expressed in CPU cycles */
+#define TIME(dev, name, bytes, call) \
+do { \
+ if (BUGLVL(D_TIMING)) { \
+ unsigned long _x, _y; \
+ _x = get_cycles(); \
+ call; \
+ _y = get_cycles(); \
+ arc_printk(D_TIMING, dev, \
+ "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \
+ name, bytes, _y - _x, \
+ 100000000 / 1024 * bytes / (_y - _x + 1)); \
+ } else { \
+ call; \
+ } \
+} while (0)
+
+/*
+ * Time needed to reset the card - in ms (milliseconds). This works on my
+ * SMC PC100. I can't find a reference that tells me just how long I
+ * should wait.
+ */
+#define RESETtime (300)
+
+/*
+ * These are the max/min lengths of packet payload, not including the
+ * arc_hardware header, but definitely including the soft header.
+ *
+ * Note: packet sizes 254, 255, 256 are impossible because of the way
+ * ARCnet registers work That's why RFC1201 defines "exception" packets.
+ * In non-RFC1201 protocols, we have to just tack some extra bytes on the
+ * end.
+ */
+#define MTU 253 /* normal packet max size */
+#define MinTU 257 /* extended packet min size */
+#define XMTU 508 /* extended packet max size */
+
+/* status/interrupt mask bit fields */
+#define TXFREEflag 0x01 /* transmitter available */
+#define TXACKflag 0x02 /* transmitted msg. ackd */
+#define RECONflag 0x04 /* network reconfigured */
+#define TESTflag 0x08 /* test flag */
+#define EXCNAKflag 0x08 /* excesive nak flag */
+#define RESETflag 0x10 /* power-on-reset */
+#define RES1flag 0x20 /* reserved - usually set by jumper */
+#define RES2flag 0x40 /* reserved - usually set by jumper */
+#define NORXflag 0x80 /* receiver inhibited */
+
+/* Flags used for IO-mapped memory operations */
+#define AUTOINCflag 0x40 /* Increase location with each access */
+#define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */
+#define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */
+
+/* in the command register, the following bits have these meanings:
+ * 0-2 command
+ * 3-4 page number (for enable rcv/xmt command)
+ * 7 receive broadcasts
+ */
+#define NOTXcmd 0x01 /* disable transmitter */
+#define NORXcmd 0x02 /* disable receiver */
+#define TXcmd 0x03 /* enable transmitter */
+#define RXcmd 0x04 /* enable receiver */
+#define CONFIGcmd 0x05 /* define configuration */
+#define CFLAGScmd 0x06 /* clear flags */
+#define TESTcmd 0x07 /* load test flags */
+
+/* flags for "clear flags" command */
+#define RESETclear 0x08 /* power-on-reset */
+#define CONFIGclear 0x10 /* system reconfigured */
+
+#define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */
+
+/* flags for "load test flags" command */
+#define TESTload 0x08 /* test flag (diagnostic) */
+
+/* byte deposited into first address of buffers on reset */
+#define TESTvalue 0321 /* that's octal for 0xD1 :) */
+
+/* for "enable receiver" command */
+#define RXbcasts 0x80 /* receive broadcasts */
+
+/* flags for "define configuration" command */
+#define NORMALconf 0x00 /* 1-249 byte packets */
+#define EXTconf 0x08 /* 250-504 byte packets */
+
+/* card feature flags, set during auto-detection.
+ * (currently only used by com20020pci)
+ */
+#define ARC_IS_5MBIT 1 /* card default speed is 5MBit */
+#define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit,
+ but default is 2.5MBit. */
+
+/* information needed to define an encapsulation driver */
+struct ArcProto {
+ char suffix; /* a for RFC1201, e for ether-encap, etc. */
+ int mtu; /* largest possible packet */
+ int is_ip; /* This is a ip plugin - not a raw thing */
+
+ void (*rx)(struct net_device *dev, int bufnum,
+ struct archdr *pkthdr, int length);
+ int (*build_header)(struct sk_buff *skb, struct net_device *dev,
+ unsigned short ethproto, uint8_t daddr);
+
+ /* these functions return '1' if the skb can now be freed */
+ int (*prepare_tx)(struct net_device *dev, struct archdr *pkt,
+ int length, int bufnum);
+ int (*continue_tx)(struct net_device *dev, int bufnum);
+ int (*ack_tx)(struct net_device *dev, int acked);
+};
+
+extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
+ *arc_bcast_proto, *arc_raw_proto;
+
+/*
+ * "Incoming" is information needed for each address that could be sending
+ * to us. Mostly for partially-received split packets.
+ */
+struct Incoming {
+ struct sk_buff *skb; /* packet data buffer */
+ __be16 sequence; /* sequence number of assembly */
+ uint8_t lastpacket, /* number of last packet (from 1) */
+ numpackets; /* number of packets in split */
+};
+
+/* only needed for RFC1201 */
+struct Outgoing {
+ struct ArcProto *proto; /* protocol driver that owns this:
+ * if NULL, no packet is pending.
+ */
+ struct sk_buff *skb; /* buffer from upper levels */
+ struct archdr *pkt; /* a pointer into the skb */
+ uint16_t length, /* bytes total */
+ dataleft, /* bytes left */
+ segnum, /* segment being sent */
+ numsegs; /* number of segments */
+};
+
+struct arcnet_local {
+ uint8_t config, /* current value of CONFIG register */
+ timeout, /* Extended timeout for COM20020 */
+ backplane, /* Backplane flag for COM20020 */
+ clockp, /* COM20020 clock divider */
+ clockm, /* COM20020 clock multiplier flag */
+ setup, /* Contents of setup1 register */
+ setup2, /* Contents of setup2 register */
+ intmask; /* current value of INTMASK register */
+ uint8_t default_proto[256]; /* default encap to use for each host */
+ int cur_tx, /* buffer used by current transmit, or -1 */
+ next_tx, /* buffer where a packet is ready to send */
+ cur_rx; /* current receive buffer */
+ int lastload_dest, /* can last loaded packet be acked? */
+ lasttrans_dest; /* can last TX'd packet be acked? */
+ int timed_out; /* need to process TX timeout and drop packet */
+ unsigned long last_timeout; /* time of last reported timeout */
+ char *card_name; /* card ident string */
+ int card_flags; /* special card features */
+
+ /* On preemtive and SMB a lock is needed */
+ spinlock_t lock;
+
+ /*
+ * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
+ * which can be used for either sending or receiving. The new dynamic
+ * buffer management routines use a simple circular queue of available
+ * buffers, and take them as they're needed. This way, we simplify
+ * situations in which we (for example) want to pre-load a transmit
+ * buffer, or start receiving while we copy a received packet to
+ * memory.
+ *
+ * The rules: only the interrupt handler is allowed to _add_ buffers to
+ * the queue; thus, this doesn't require a lock. Both the interrupt
+ * handler and the transmit function will want to _remove_ buffers, so
+ * we need to handle the situation where they try to do it at the same
+ * time.
+ *
+ * If next_buf == first_free_buf, the queue is empty. Since there are
+ * only four possible buffers, the queue should never be full.
+ */
+ atomic_t buf_lock;
+ int buf_queue[5];
+ int next_buf, first_free_buf;
+
+ /* network "reconfiguration" handling */
+ unsigned long first_recon; /* time of "first" RECON message to count */
+ unsigned long last_recon; /* time of most recent RECON */
+ int num_recons; /* number of RECONs between first and last. */
+ int network_down; /* do we think the network is down? */
+
+ int excnak_pending; /* We just got an excesive nak interrupt */
+
+ struct {
+ uint16_t sequence; /* sequence number (incs with each packet) */
+ __be16 aborted_seq;
+
+ struct Incoming incoming[256]; /* one from each address */
+ } rfc1201;
+
+ /* really only used by rfc1201, but we'll pretend it's not */
+ struct Outgoing outgoing; /* packet currently being sent */
+
+ /* hardware-specific functions */
+ struct {
+ struct module *owner;
+ void (*command)(struct net_device *dev, int cmd);
+ int (*status)(struct net_device *dev);
+ void (*intmask)(struct net_device *dev, int mask);
+ int (*reset)(struct net_device *dev, int really_reset);
+ void (*open)(struct net_device *dev);
+ void (*close)(struct net_device *dev);
+
+ void (*copy_to_card)(struct net_device *dev, int bufnum,
+ int offset, void *buf, int count);
+ void (*copy_from_card)(struct net_device *dev, int bufnum,
+ int offset, void *buf, int count);
+ } hw;
+
+ void __iomem *mem_start; /* pointer to ioremap'ed MMIO */
+};
+
+#define ARCRESET(x) (lp->hw.reset(dev, (x)))
+#define ACOMMAND(x) (lp->hw.command(dev, (x)))
+#define ASTATUS() (lp->hw.status(dev))
+#define AINTMASK(x) (lp->hw.intmask(dev, (x)))
+
+#if ARCNET_DEBUG_MAX & D_SKB
+void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
+#else
+static inline
+void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc)
+{
+}
+#endif
+
+void arcnet_unregister_proto(struct ArcProto *proto);
+irqreturn_t arcnet_interrupt(int irq, void *dev_id);
+struct net_device *alloc_arcdev(const char *name);
+
+int arcnet_open(struct net_device *dev);
+int arcnet_close(struct net_device *dev);
+netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
+void arcnet_timeout(struct net_device *dev);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_ARCDEVICE_H */