Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 25 insertions, 15 deletions

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_common.h b/drivers/net/ethernet/aquantia/atlantic/aq_common.h
index c8c402b013bb..52ad9433cabc 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_common.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_common.h
@@ -1,7 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * aQuantia Corporation Network Driver
- * Copyright (C) 2014-2017 aQuantia Corporation. All rights reserved
+/* Atlantic Network Driver
+ *
+ * Copyright (C) 2014-2019 aQuantia Corporation
+ * Copyright (C) 2019-2020 Marvell International Ltd.
  */
 
 /* File aq_common.h: Basic includes for all files in project. */
@@ -37,22 +38,31 @@
 #define AQ_DEVICE_ID_AQC111S	0x91B1
 #define AQ_DEVICE_ID_AQC112S	0x92B1
 
-#define HW_ATL_NIC_NAME "aQuantia AQtion 10Gbit Network Adapter"
+#define AQ_DEVICE_ID_AQC113DEV	0x00C0
+#define AQ_DEVICE_ID_AQC113CS	0x94C0
+#define AQ_DEVICE_ID_AQC114CS	0x93C0
+#define AQ_DEVICE_ID_AQC113	0x04C0
+#define AQ_DEVICE_ID_AQC113C	0x14C0
+#define AQ_DEVICE_ID_AQC115C	0x12C0
+
+#define HW_ATL_NIC_NAME "Marvell (aQuantia) AQtion 10Gbit Network Adapter"
 
 #define AQ_HWREV_ANY	0
 #define AQ_HWREV_1	1
 #define AQ_HWREV_2	2
 
-#define AQ_NIC_RATE_10G        BIT(0)
-#define AQ_NIC_RATE_5G         BIT(1)
-#define AQ_NIC_RATE_5GSR       BIT(2)
-#define AQ_NIC_RATE_2GS        BIT(3)
-#define AQ_NIC_RATE_1G         BIT(4)
-#define AQ_NIC_RATE_100M       BIT(5)
-
-#define AQ_NIC_RATE_EEE_10G	BIT(6)
-#define AQ_NIC_RATE_EEE_5G	BIT(7)
-#define AQ_NIC_RATE_EEE_2GS	BIT(8)
-#define AQ_NIC_RATE_EEE_1G	BIT(9)
+#define AQ_NIC_RATE_10G		BIT(0)
+#define AQ_NIC_RATE_5G		BIT(1)
+#define AQ_NIC_RATE_5GSR	BIT(2)
+#define AQ_NIC_RATE_2G5		BIT(3)
+#define AQ_NIC_RATE_1G		BIT(4)
+#define AQ_NIC_RATE_100M	BIT(5)
+#define AQ_NIC_RATE_10M		BIT(6)
+
+#define AQ_NIC_RATE_EEE_10G	BIT(7)
+#define AQ_NIC_RATE_EEE_5G	BIT(8)
+#define AQ_NIC_RATE_EEE_2G5	BIT(9)
+#define AQ_NIC_RATE_EEE_1G	BIT(10)
+#define AQ_NIC_RATE_EEE_100M	BIT(11)
 
 #endif /* AQ_COMMON_H */