diff options
author | Christian Marangi <ansuelsmth@gmail.com> | 2024-05-06 15:32:46 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2024-05-08 14:19:54 +0300 |
commit | abb45a2477f533cd4aab3085defdff131e2e8c4f (patch) | |
tree | 7c4d39217b84a5d8dd32d066810e04af75c458d3 /drivers/net/ethernet | |
parent | b7ffab29a8e4705e7b9f05293669dc8a30272bc6 (diff) | |
download | linux-abb45a2477f533cd4aab3085defdff131e2e8c4f.tar.xz |
net: stmmac: dwmac-ipq806x: account for rgmii-txid/rxid/id phy-mode
Currently the ipq806x dwmac driver is almost always used attached to the
CPU port of a switch and phy-mode was always set to "rgmii" or "sgmii".
Some device came up with a special configuration where the PHY is
directly attached to the GMAC port and in those case phy-mode needs to
be set to "rgmii-id" to make the PHY correctly work and receive packets.
Since the driver supports only "rgmii" and "sgmii" mode, when "rgmii-id"
(or variants) mode is set, the mode is rejected and probe fails.
Add support also for these phy-modes to correctly setup PHYs that requires
delay applied to tx/rx.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c index 281687d7083b..4ba15873d5b1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -171,6 +171,9 @@ static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed) switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: div = get_clk_div_rgmii(gmac, speed); clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); @@ -410,6 +413,9 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) val |= NSS_COMMON_GMAC_CTL_CSYS_REQ; switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; break; case PHY_INTERFACE_MODE_SGMII: @@ -425,6 +431,9 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id)); switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); break; @@ -442,6 +451,9 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); switch (gmac->phy_mode) { case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); break; |