summaryrefslogtreecommitdiff
path: root/drivers/net/hamradio
diff options
context:
space:
mode:
authorJakub Kicinski <kuba@kernel.org>2022-04-26 20:54:36 +0300
committerDavid S. Miller <davem@davemloft.net>2022-04-27 14:22:56 +0300
commit865e2eb08f51820bdefa37a80abe771b5979d440 (patch)
tree8701faed134b85c39f624c64102fbe598b3cdeec /drivers/net/hamradio
parentbc6df26f1f785be9b4c10d37e50ac40b46428984 (diff)
downloadlinux-865e2eb08f51820bdefa37a80abe771b5979d440.tar.xz
net: hamradio: remove support for DMA SCC devices
Another incarnation of Z8530, looks like? Again, no real changes in the git history, and it needs VIRT_TO_BUS. Unlikely to have users, let's spend less time refactoring dead code... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/hamradio')
-rw-r--r--drivers/net/hamradio/Kconfig34
-rw-r--r--drivers/net/hamradio/Makefile1
-rw-r--r--drivers/net/hamradio/dmascc.c1450
3 files changed, 0 insertions, 1485 deletions
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 441da03c23ee..a9c44f08199d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -45,40 +45,6 @@ config BPQETHER
useful if some other computer on your local network has a direct
amateur radio connection.
-config DMASCC
- tristate "High-speed (DMA) SCC driver for AX.25"
- depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
- depends on VIRT_TO_BUS
- help
- This is a driver for high-speed SCC boards, i.e. those supporting
- DMA on one port. You usually use those boards to connect your
- computer to an amateur radio modem (such as the WA4DSY 56kbps
- modem), in order to send and receive AX.25 packet radio network
- traffic.
-
- Currently, this driver supports Ottawa PI/PI2, Paccomm/Gracilis
- PackeTwin, and S5SCC/DMA boards. They are detected automatically.
- If you have one of these cards, say Y here and read the AX25-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- This driver can operate multiple boards simultaneously. If you
- compile it as a module (by saying M instead of Y), it will be called
- dmascc. If you don't pass any parameter to the driver, all
- possible I/O addresses are probed. This could irritate other devices
- that are currently not in use. You may specify the list of addresses
- to be probed by "dmascc.io=addr1,addr2,..." (when compiled into the
- kernel image) or "io=addr1,addr2,..." (when loaded as a module). The
- network interfaces will be called dmascc0 and dmascc1 for the board
- detected first, dmascc2 and dmascc3 for the second one, and so on.
-
- Before you configure each interface with ifconfig, you MUST set
- certain parameters, such as channel access timing, clock mode, and
- DMA channel. This is accomplished with a small utility program,
- dmascc_cfg, available at
- <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
- get at least version 1.27 of dmascc_cfg, as older versions will not
- work with the current driver.
-
config SCC
tristate "Z8530 SCC driver"
depends on ISA && AX25 && ISA_DMA_API
diff --git a/drivers/net/hamradio/Makefile b/drivers/net/hamradio/Makefile
index 7a1518d763e3..25fc400369ba 100644
--- a/drivers/net/hamradio/Makefile
+++ b/drivers/net/hamradio/Makefile
@@ -11,7 +11,6 @@
# Christoph Hellwig <hch@infradead.org>
#
-obj-$(CONFIG_DMASCC) += dmascc.o
obj-$(CONFIG_SCC) += scc.o
obj-$(CONFIG_MKISS) += mkiss.o
obj-$(CONFIG_6PACK) += 6pack.o
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
deleted file mode 100644
index a2a12208e3ad..000000000000
--- a/drivers/net/hamradio/dmascc.c
+++ /dev/null
@@ -1,1450 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Driver for high-speed SCC boards (those with DMA support)
- * Copyright (C) 1997-2000 Klaus Kudielka
- *
- * S5SCC/DMA support by Janko Koleznik S52HI
- */
-
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/rtnetlink.h>
-#include <linux/sockios.h>
-#include <linux/workqueue.h>
-#include <linux/atomic.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <linux/jiffies.h>
-#include <net/ax25.h>
-#include "z8530.h"
-
-
-/* Number of buffers per channel */
-
-#define NUM_TX_BUF 2 /* NUM_TX_BUF >= 1 (min. 2 recommended) */
-#define NUM_RX_BUF 6 /* NUM_RX_BUF >= 1 (min. 2 recommended) */
-#define BUF_SIZE 1576 /* BUF_SIZE >= mtu + hard_header_len */
-
-
-/* Cards supported */
-
-#define HW_PI { "Ottawa PI", 0x300, 0x20, 0x10, 8, \
- 0, 8, 1843200, 3686400 }
-#define HW_PI2 { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \
- 0, 8, 3686400, 7372800 }
-#define HW_TWIN { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \
- 0, 4, 6144000, 6144000 }
-#define HW_S5 { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \
- 0, 8, 4915200, 9830400 }
-
-#define HARDWARE { HW_PI, HW_PI2, HW_TWIN, HW_S5 }
-
-#define TMR_0_HZ 25600 /* Frequency of timer 0 */
-
-#define TYPE_PI 0
-#define TYPE_PI2 1
-#define TYPE_TWIN 2
-#define TYPE_S5 3
-#define NUM_TYPES 4
-
-#define MAX_NUM_DEVS 32
-
-
-/* SCC chips supported */
-
-#define Z8530 0
-#define Z85C30 1
-#define Z85230 2
-
-#define CHIPNAMES { "Z8530", "Z85C30", "Z85230" }
-
-
-/* I/O registers */
-
-/* 8530 registers relative to card base */
-#define SCCB_CMD 0x00
-#define SCCB_DATA 0x01
-#define SCCA_CMD 0x02
-#define SCCA_DATA 0x03
-
-/* 8253/8254 registers relative to card base */
-#define TMR_CNT0 0x00
-#define TMR_CNT1 0x01
-#define TMR_CNT2 0x02
-#define TMR_CTRL 0x03
-
-/* Additional PI/PI2 registers relative to card base */
-#define PI_DREQ_MASK 0x04
-
-/* Additional PackeTwin registers relative to card base */
-#define TWIN_INT_REG 0x08
-#define TWIN_CLR_TMR1 0x09
-#define TWIN_CLR_TMR2 0x0a
-#define TWIN_SPARE_1 0x0b
-#define TWIN_DMA_CFG 0x08
-#define TWIN_SERIAL_CFG 0x09
-#define TWIN_DMA_CLR_FF 0x0a
-#define TWIN_SPARE_2 0x0b
-
-
-/* PackeTwin I/O register values */
-
-/* INT_REG */
-#define TWIN_SCC_MSK 0x01
-#define TWIN_TMR1_MSK 0x02
-#define TWIN_TMR2_MSK 0x04
-#define TWIN_INT_MSK 0x07
-
-/* SERIAL_CFG */
-#define TWIN_DTRA_ON 0x01
-#define TWIN_DTRB_ON 0x02
-#define TWIN_EXTCLKA 0x04
-#define TWIN_EXTCLKB 0x08
-#define TWIN_LOOPA_ON 0x10
-#define TWIN_LOOPB_ON 0x20
-#define TWIN_EI 0x80
-
-/* DMA_CFG */
-#define TWIN_DMA_HDX_T1 0x08
-#define TWIN_DMA_HDX_R1 0x0a
-#define TWIN_DMA_HDX_T3 0x14
-#define TWIN_DMA_HDX_R3 0x16
-#define TWIN_DMA_FDX_T3R1 0x1b
-#define TWIN_DMA_FDX_T1R3 0x1d
-
-
-/* Status values */
-
-#define IDLE 0
-#define TX_HEAD 1
-#define TX_DATA 2
-#define TX_PAUSE 3
-#define TX_TAIL 4
-#define RTS_OFF 5
-#define WAIT 6
-#define DCD_ON 7
-#define RX_ON 8
-#define DCD_OFF 9
-
-
-/* Ioctls */
-
-#define SIOCGSCCPARAM SIOCDEVPRIVATE
-#define SIOCSSCCPARAM (SIOCDEVPRIVATE+1)
-
-
-/* Data types */
-
-struct scc_param {
- int pclk_hz; /* frequency of BRG input (don't change) */
- int brg_tc; /* BRG terminal count; BRG disabled if < 0 */
- int nrzi; /* 0 (nrz), 1 (nrzi) */
- int clocks; /* see dmascc_cfg documentation */
- int txdelay; /* [1/TMR_0_HZ] */
- int txtimeout; /* [1/HZ] */
- int txtail; /* [1/TMR_0_HZ] */
- int waittime; /* [1/TMR_0_HZ] */
- int slottime; /* [1/TMR_0_HZ] */
- int persist; /* 1 ... 256 */
- int dma; /* -1 (disable), 0, 1, 3 */
- int txpause; /* [1/TMR_0_HZ] */
- int rtsoff; /* [1/TMR_0_HZ] */
- int dcdon; /* [1/TMR_0_HZ] */
- int dcdoff; /* [1/TMR_0_HZ] */
-};
-
-struct scc_hardware {
- char *name;
- int io_region;
- int io_delta;
- int io_size;
- int num_devs;
- int scc_offset;
- int tmr_offset;
- int tmr_hz;
- int pclk_hz;
-};
-
-struct scc_priv {
- int type;
- int chip;
- struct net_device *dev;
- struct scc_info *info;
-
- int channel;
- int card_base, scc_cmd, scc_data;
- int tmr_cnt, tmr_ctrl, tmr_mode;
- struct scc_param param;
- char rx_buf[NUM_RX_BUF][BUF_SIZE];
- int rx_len[NUM_RX_BUF];
- int rx_ptr;
- struct work_struct rx_work;
- int rx_head, rx_tail, rx_count;
- int rx_over;
- char tx_buf[NUM_TX_BUF][BUF_SIZE];
- int tx_len[NUM_TX_BUF];
- int tx_ptr;
- int tx_head, tx_tail, tx_count;
- int state;
- unsigned long tx_start;
- int rr0;
- spinlock_t *register_lock; /* Per scc_info */
- spinlock_t ring_lock;
-};
-
-struct scc_info {
- int irq_used;
- int twin_serial_cfg;
- struct net_device *dev[2];
- struct scc_priv priv[2];
- struct scc_info *next;
- spinlock_t register_lock; /* Per device register lock */
-};
-
-
-/* Function declarations */
-static int setup_adapter(int card_base, int type, int n) __init;
-
-static void write_scc(struct scc_priv *priv, int reg, int val);
-static void write_scc_data(struct scc_priv *priv, int val, int fast);
-static int read_scc(struct scc_priv *priv, int reg);
-static int read_scc_data(struct scc_priv *priv);
-
-static int scc_open(struct net_device *dev);
-static int scc_close(struct net_device *dev);
-static int scc_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
- void __user *data, int cmd);
-static int scc_send_packet(struct sk_buff *skb, struct net_device *dev);
-static int scc_set_mac_address(struct net_device *dev, void *sa);
-
-static inline void tx_on(struct scc_priv *priv);
-static inline void rx_on(struct scc_priv *priv);
-static inline void rx_off(struct scc_priv *priv);
-static void start_timer(struct scc_priv *priv, int t, int r15);
-static inline unsigned char random(void);
-
-static inline void z8530_isr(struct scc_info *info);
-static irqreturn_t scc_isr(int irq, void *dev_id);
-static void rx_isr(struct scc_priv *priv);
-static void special_condition(struct scc_priv *priv, int rc);
-static void rx_bh(struct work_struct *);
-static void tx_isr(struct scc_priv *priv);
-static void es_isr(struct scc_priv *priv);
-static void tm_isr(struct scc_priv *priv);
-
-
-/* Initialization variables */
-
-static int io[MAX_NUM_DEVS] __initdata = { 0, };
-
-/* Beware! hw[] is also used in dmascc_exit(). */
-static struct scc_hardware hw[NUM_TYPES] = HARDWARE;
-
-
-/* Global variables */
-
-static struct scc_info *first;
-static unsigned long rand;
-
-
-MODULE_AUTHOR("Klaus Kudielka");
-MODULE_DESCRIPTION("Driver for high-speed SCC boards");
-module_param_hw_array(io, int, ioport, NULL, 0);
-MODULE_LICENSE("GPL");
-
-static void __exit dmascc_exit(void)
-{
- int i;
- struct scc_info *info;
-
- while (first) {
- info = first;
-
- /* Unregister devices */
- for (i = 0; i < 2; i++)
- unregister_netdev(info->dev[i]);
-
- /* Reset board */
- if (info->priv[0].type == TYPE_TWIN)
- outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
- write_scc(&info->priv[0], R9, FHWRES);
- release_region(info->dev[0]->base_addr,
- hw[info->priv[0].type].io_size);
-
- for (i = 0; i < 2; i++)
- free_netdev(info->dev[i]);
-
- /* Free memory */
- first = info->next;
- kfree(info);
- }
-}
-
-static int __init dmascc_init(void)
-{
- int h, i, j, n;
- int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS],
- t1[MAX_NUM_DEVS];
- unsigned t_val;
- unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS],
- counting[MAX_NUM_DEVS];
-
- /* Initialize random number generator */
- rand = jiffies;
- /* Cards found = 0 */
- n = 0;
- /* Warning message */
- if (!io[0])
- printk(KERN_INFO "dmascc: autoprobing (dangerous)\n");
-
- /* Run autodetection for each card type */
- for (h = 0; h < NUM_TYPES; h++) {
-
- if (io[0]) {
- /* User-specified I/O address regions */
- for (i = 0; i < hw[h].num_devs; i++)
- base[i] = 0;
- for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) {
- j = (io[i] -
- hw[h].io_region) / hw[h].io_delta;
- if (j >= 0 && j < hw[h].num_devs &&
- hw[h].io_region +
- j * hw[h].io_delta == io[i]) {
- base[j] = io[i];
- }
- }
- } else {
- /* Default I/O address regions */
- for (i = 0; i < hw[h].num_devs; i++) {
- base[i] =
- hw[h].io_region + i * hw[h].io_delta;
- }
- }
-
- /* Check valid I/O address regions */
- for (i = 0; i < hw[h].num_devs; i++)
- if (base[i]) {
- if (!request_region
- (base[i], hw[h].io_size, "dmascc"))
- base[i] = 0;
- else {
- tcmd[i] =
- base[i] + hw[h].tmr_offset +
- TMR_CTRL;
- t0[i] =
- base[i] + hw[h].tmr_offset +
- TMR_CNT0;
- t1[i] =
- base[i] + hw[h].tmr_offset +
- TMR_CNT1;
- }
- }
-
- /* Start timers */
- for (i = 0; i < hw[h].num_devs; i++)
- if (base[i]) {
- /* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */
- outb(0x36, tcmd[i]);
- outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF,
- t0[i]);
- outb((hw[h].tmr_hz / TMR_0_HZ) >> 8,
- t0[i]);
- /* Timer 1: LSB+MSB, Mode 0, HZ/10 */
- outb(0x70, tcmd[i]);
- outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]);
- outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]);
- start[i] = jiffies;
- delay[i] = 0;
- counting[i] = 1;
- /* Timer 2: LSB+MSB, Mode 0 */
- outb(0xb0, tcmd[i]);
- }
- time = jiffies;
- /* Wait until counter registers are loaded */
- udelay(2000000 / TMR_0_HZ);
-
- /* Timing loop */
- while (time_is_after_jiffies(time + 13)) {
- for (i = 0; i < hw[h].num_devs; i++)
- if (base[i] && counting[i]) {
- /* Read back Timer 1: latch; read LSB; read MSB */
- outb(0x40, tcmd[i]);
- t_val =
- inb(t1[i]) + (inb(t1[i]) << 8);
- /* Also check whether counter did wrap */
- if (t_val == 0 ||
- t_val > TMR_0_HZ / HZ * 10)
- counting[i] = 0;
- delay[i] = jiffies - start[i];
- }
- }
-
- /* Evaluate measurements */
- for (i = 0; i < hw[h].num_devs; i++)
- if (base[i]) {
- if ((delay[i] >= 9 && delay[i] <= 11) &&
- /* Ok, we have found an adapter */
- (setup_adapter(base[i], h, n) == 0))
- n++;
- else
- release_region(base[i],
- hw[h].io_size);
- }
-
- } /* NUM_TYPES */
-
- /* If any adapter was successfully initialized, return ok */
- if (n)
- return 0;
-
- /* If no adapter found, return error */
- printk(KERN_INFO "dmascc: no adapters found\n");
- return -EIO;
-}
-
-module_init(dmascc_init);
-module_exit(dmascc_exit);
-
-static void __init dev_setup(struct net_device *dev)
-{
- dev->type = ARPHRD_AX25;
- dev->hard_header_len = AX25_MAX_HEADER_LEN;
- dev->mtu = 1500;
- dev->addr_len = AX25_ADDR_LEN;
- dev->tx_queue_len = 64;
- memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
- dev_addr_set(dev, (u8 *)&ax25_defaddr);
-}
-
-static const struct net_device_ops scc_netdev_ops = {
- .ndo_open = scc_open,
- .ndo_stop = scc_close,
- .ndo_start_xmit = scc_send_packet,
- .ndo_siocdevprivate = scc_siocdevprivate,
- .ndo_set_mac_address = scc_set_mac_address,
-};
-
-static int __init setup_adapter(int card_base, int type, int n)
-{
- int i, irq, chip, err;
- struct scc_info *info;
- struct net_device *dev;
- struct scc_priv *priv;
- unsigned long time;
- unsigned int irqs;
- int tmr_base = card_base + hw[type].tmr_offset;
- int scc_base = card_base + hw[type].scc_offset;
- char *chipnames[] = CHIPNAMES;
-
- /* Initialize what is necessary for write_scc and write_scc_data */
- info = kzalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA);
- if (!info) {
- err = -ENOMEM;
- goto out;
- }
-
- info->dev[0] = alloc_netdev(0, "", NET_NAME_UNKNOWN, dev_setup);
- if (!info->dev[0]) {
- printk(KERN_ERR "dmascc: "
- "could not allocate memory for %s at %#3x\n",
- hw[type].name, card_base);
- err = -ENOMEM;
- goto out1;
- }
-
- info->dev[1] = alloc_netdev(0, "", NET_NAME_UNKNOWN, dev_setup);
- if (!info->dev[1]) {
- printk(KERN_ERR "dmascc: "
- "could not allocate memory for %s at %#3x\n",
- hw[type].name, card_base);
- err = -ENOMEM;
- goto out2;
- }
- spin_lock_init(&info->register_lock);
-
- priv = &info->priv[0];
- priv->type = type;
- priv->card_base = card_base;
- priv->scc_cmd = scc_base + SCCA_CMD;
- priv->scc_data = scc_base + SCCA_DATA;
- priv->register_lock = &info->register_lock;
-
- /* Reset SCC */
- write_scc(priv, R9, FHWRES | MIE | NV);
-
- /* Determine type of chip by enabling SDLC/HDLC enhancements */
- write_scc(priv, R15, SHDLCE);
- if (!read_scc(priv, R15)) {
- /* WR7' not present. This is an ordinary Z8530 SCC. */
- chip = Z8530;
- } else {
- /* Put one character in TX FIFO */
- write_scc_data(priv, 0, 0);
- if (read_scc(priv, R0) & Tx_BUF_EMP) {
- /* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */
- chip = Z85230;
- } else {
- /* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */
- chip = Z85C30;
- }
- }
- write_scc(priv, R15, 0);
-
- /* Start IRQ auto-detection */
- irqs = probe_irq_on();
-
- /* Enable interrupts */
- if (type == TYPE_TWIN) {
- outb(0, card_base + TWIN_DMA_CFG);
- inb(card_base + TWIN_CLR_TMR1);
- inb(card_base + TWIN_CLR_TMR2);
- info->twin_serial_cfg = TWIN_EI;
- outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG);
- } else {
- write_scc(priv, R15, CTSIE);
- write_scc(priv, R0, RES_EXT_INT);
- write_scc(priv, R1, EXT_INT_ENAB);
- }
-
- /* Start timer */
- outb(1, tmr_base + TMR_CNT1);
- outb(0, tmr_base + TMR_CNT1);
-
- /* Wait and detect IRQ */
- time = jiffies;
- while (time_is_after_jiffies(time + 2 + HZ / TMR_0_HZ));
- irq = probe_irq_off(irqs);
-
- /* Clear pending interrupt, disable interrupts */
- if (type == TYPE_TWIN) {
- inb(card_base + TWIN_CLR_TMR1);
- } else {
- write_scc(priv, R1, 0);
- write_scc(priv, R15, 0);
- write_scc(priv, R0, RES_EXT_INT);
- }
-
- if (irq <= 0) {
- printk(KERN_ERR
- "dmascc: could not find irq of %s at %#3x (irq=%d)\n",
- hw[type].name, card_base, irq);
- err = -ENODEV;
- goto out3;
- }
-
- /* Set up data structures */
- for (i = 0; i < 2; i++) {
- dev = info->dev[i];
- priv = &info->priv[i];
- priv->type = type;
- priv->chip = chip;
- priv->dev = dev;
- priv->info = info;
- priv->channel = i;
- spin_lock_init(&priv->ring_lock);
- priv->register_lock = &info->register_lock;
- priv->card_base = card_base;
- priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD);
- priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA);
- priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1);
- priv->tmr_ctrl = tmr_base + TMR_CTRL;
- priv->tmr_mode = i ? 0xb0 : 0x70;
- priv->param.pclk_hz = hw[type].pclk_hz;
- priv->param.brg_tc = -1;
- priv->param.clocks = TCTRxCP | RCRTxCP;
- priv->param.persist = 256;
- priv->param.dma = -1;
- INIT_WORK(&priv->rx_work, rx_bh);
- dev->ml_priv = priv;
- snprintf(dev->name, sizeof(dev->name), "dmascc%i", 2 * n + i);
- dev->base_addr = card_base;
- dev->irq = irq;
- dev->netdev_ops = &scc_netdev_ops;
- dev->header_ops = &ax25_header_ops;
- }
- if (register_netdev(info->dev[0])) {
- printk(KERN_ERR "dmascc: could not register %s\n",
- info->dev[0]->name);
- err = -ENODEV;
- goto out3;
- }
- if (register_netdev(info->dev[1])) {
- printk(KERN_ERR "dmascc: could not register %s\n",
- info->dev[1]->name);
- err = -ENODEV;
- goto out4;
- }
-
-
- info->next = first;
- first = info;
- printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n",
- hw[type].name, chipnames[chip], card_base, irq);
- return 0;
-
- out4:
- unregister_netdev(info->dev[0]);
- out3:
- if (info->priv[0].type == TYPE_TWIN)
- outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
- write_scc(&info->priv[0], R9, FHWRES);
- free_netdev(info->dev[1]);
- out2:
- free_netdev(info->dev[0]);
- out1:
- kfree(info);
- out:
- return err;
-}
-
-
-/* Driver functions */
-
-static void write_scc(struct scc_priv *priv, int reg, int val)
-{
- unsigned long flags;
- switch (priv->type) {
- case TYPE_S5:
- if (reg)
- outb(reg, priv->scc_cmd);
- outb(val, priv->scc_cmd);
- return;
- case TYPE_TWIN:
- if (reg)
- outb_p(reg, priv->scc_cmd);
- outb_p(val, priv->scc_cmd);
- return;
- default:
- spin_lock_irqsave(priv->register_lock, flags);
- outb_p(0, priv->card_base + PI_DREQ_MASK);
- if (reg)
- outb_p(reg, priv->scc_cmd);
- outb_p(val, priv->scc_cmd);
- outb(1, priv->card_base + PI_DREQ_MASK);
- spin_unlock_irqrestore(priv->register_lock, flags);
- return;
- }
-}
-
-
-static void write_scc_data(struct scc_priv *priv, int val, int fast)
-{
- unsigned long flags;
- switch (priv->type) {
- case TYPE_S5:
- outb(val, priv->scc_data);
- return;
- case TYPE_TWIN:
- outb_p(val, priv->scc_data);
- return;
- default:
- if (fast)
- outb_p(val, priv->scc_data);
- else {
- spin_lock_irqsave(priv->register_lock, flags);
- outb_p(0, priv->card_base + PI_DREQ_MASK);
- outb_p(val, priv->scc_data);
- outb(1, priv->card_base + PI_DREQ_MASK);
- spin_unlock_irqrestore(priv->register_lock, flags);
- }
- return;
- }
-}
-
-
-static int read_scc(struct scc_priv *priv, int reg)
-{
- int rc;
- unsigned long flags;
- switch (priv->type) {
- case TYPE_S5:
- if (reg)
- outb(reg, priv->scc_cmd);
- return inb(priv->scc_cmd);
- case TYPE_TWIN:
- if (reg)
- outb_p(reg, priv->scc_cmd);
- return inb_p(priv->scc_cmd);
- default:
- spin_lock_irqsave(priv->register_lock, flags);
- outb_p(0, priv->card_base + PI_DREQ_MASK);
- if (reg)
- outb_p(reg, priv->scc_cmd);
- rc = inb_p(priv->scc_cmd);
- outb(1, priv->card_base + PI_DREQ_MASK);
- spin_unlock_irqrestore(priv->register_lock, flags);
- return rc;
- }
-}
-
-
-static int read_scc_data(struct scc_priv *priv)
-{
- int rc;
- unsigned long flags;
- switch (priv->type) {
- case TYPE_S5:
- return inb(priv->scc_data);
- case TYPE_TWIN:
- return inb_p(priv->scc_data);
- default:
- spin_lock_irqsave(priv->register_lock, flags);
- outb_p(0, priv->card_base + PI_DREQ_MASK);
- rc = inb_p(priv->scc_data);
- outb(1, priv->card_base + PI_DREQ_MASK);
- spin_unlock_irqrestore(priv->register_lock, flags);
- return rc;
- }
-}
-
-
-static int scc_open(struct net_device *dev)
-{
- struct scc_priv *priv = dev->ml_priv;
- struct scc_info *info = priv->info;
- int card_base = priv->card_base;
-
- /* Request IRQ if not already used by other channel */
- if (!info->irq_used) {
- if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) {
- return -EAGAIN;
- }
- }
- info->irq_used++;
-
- /* Request DMA if required */
- if (priv->param.dma >= 0) {
- if (request_dma(priv->param.dma, "dmascc")) {
- if (--info->irq_used == 0)
- free_irq(dev->irq, info);
- return -EAGAIN;
- } else {
- unsigned long flags = claim_dma_lock();
- clear_dma_ff(priv->param.dma);
- release_dma_lock(flags);
- }
- }
-
- /* Initialize local variables */
- priv->rx_ptr = 0;
- priv->rx_over = 0;
- priv->rx_head = priv->rx_tail = priv->rx_count = 0;
- priv->state = IDLE;
- priv->tx_head = priv->tx_tail = priv->tx_count = 0;
- priv->tx_ptr = 0;
-
- /* Reset channel */
- write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
- /* X1 clock, SDLC mode */
- write_scc(priv, R4, SDLC | X1CLK);
- /* DMA */
- write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
- /* 8 bit RX char, RX disable */
- write_scc(priv, R3, Rx8);
- /* 8 bit TX char, TX disable */
- write_scc(priv, R5, Tx8);
- /* SDLC address field */
- write_scc(priv, R6, 0);
- /* SDLC flag */
- write_scc(priv, R7, FLAG);
- switch (priv->chip) {
- case Z85C30:
- /* Select WR7' */
- write_scc(priv, R15, SHDLCE);
- /* Auto EOM reset */
- write_scc(priv, R7, AUTOEOM);
- write_scc(priv, R15, 0);
- break;
- case Z85230:
- /* Select WR7' */
- write_scc(priv, R15, SHDLCE);
- /* The following bits are set (see 2.5.2.1):
- - Automatic EOM reset
- - Interrupt request if RX FIFO is half full
- This bit should be ignored in DMA mode (according to the
- documentation), but actually isn't. The receiver doesn't work if
- it is set. Thus, we have to clear it in DMA mode.
- - Interrupt/DMA request if TX FIFO is completely empty
- a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30
- compatibility).
- b) If cleared, DMA requests may follow each other very quickly,
- filling up the TX FIFO.
- Advantage: TX works even in case of high bus latency.
- Disadvantage: Edge-triggered DMA request circuitry may miss
- a request. No more data is delivered, resulting
- in a TX FIFO underrun.
- Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared.
- The PackeTwin doesn't. I don't know about the PI, but let's
- assume it behaves like the PI2.
- */
- if (priv->param.dma >= 0) {
- if (priv->type == TYPE_TWIN)
- write_scc(priv, R7, AUTOEOM | TXFIFOE);
- else
- write_scc(priv, R7, AUTOEOM);
- } else {
- write_scc(priv, R7, AUTOEOM | RXFIFOH);
- }
- write_scc(priv, R15, 0);
- break;
- }
- /* Preset CRC, NRZ(I) encoding */
- write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ));
-
- /* Configure baud rate generator */
- if (priv->param.brg_tc >= 0) {
- /* Program BR generator */
- write_scc(priv, R12, priv->param.brg_tc & 0xFF);
- write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF);
- /* BRG source = SYS CLK; enable BRG; DTR REQ function (required by
- PackeTwin, not connected on the PI2); set DPLL source to BRG */
- write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL);
- /* Enable DPLL */
- write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL);
- } else {
- /* Disable BR generator */
- write_scc(priv, R14, DTRREQ | BRSRC);
- }
-
- /* Configure clocks */
- if (priv->type == TYPE_TWIN) {
- /* Disable external TX clock receiver */
- outb((info->twin_serial_cfg &=
- ~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
- card_base + TWIN_SERIAL_CFG);
- }
- write_scc(priv, R11, priv->param.clocks);
- if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) {
- /* Enable external TX clock receiver */
- outb((info->twin_serial_cfg |=
- (priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
- card_base + TWIN_SERIAL_CFG);
- }
-
- /* Configure PackeTwin */
- if (priv->type == TYPE_TWIN) {
- /* Assert DTR, enable interrupts */
- outb((info->twin_serial_cfg |= TWIN_EI |
- (priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)),
- card_base + TWIN_SERIAL_CFG);
- }
-
- /* Read current status */
- priv->rr0 = read_scc(priv, R0);
- /* Enable DCD interrupt */
- write_scc(priv, R15, DCDIE);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-
-static int scc_close(struct net_device *dev)
-{
- struct scc_priv *priv = dev->ml_priv;
- struct scc_info *info = priv->info;
- int card_base = priv->card_base;
-
- netif_stop_queue(dev);
-
- if (priv->type == TYPE_TWIN) {
- /* Drop DTR */
- outb((info->twin_serial_cfg &=
- (priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)),
- card_base + TWIN_SERIAL_CFG);
- }
-
- /* Reset channel, free DMA and IRQ */
- write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
- if (priv->param.dma >= 0) {
- if (priv->type == TYPE_TWIN)
- outb(0, card_base + TWIN_DMA_CFG);
- free_dma(priv->param.dma);
- }
- if (--info->irq_used == 0)
- free_irq(dev->irq, info);
-
- return 0;
-}
-
-
-static int scc_siocdevprivate(struct net_device *dev, struct ifreq *ifr, void __user *data, int cmd)
-{
- struct scc_priv *priv = dev->ml_priv;
-
- switch (cmd) {
- case SIOCGSCCPARAM:
- if (copy_to_user(data, &priv->param, sizeof(struct scc_param)))
- return -EFAULT;
- return 0;
- case SIOCSSCCPARAM:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (netif_running(dev))
- return -EAGAIN;
- if (copy_from_user(&priv->param, data,
- sizeof(struct scc_param)))
- return -EFAULT;
- return 0;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-
-static int scc_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct scc_priv *priv = dev->ml_priv;
- unsigned long flags;
- int i;
-
- if (skb->protocol == htons(ETH_P_IP))
- return ax25_ip_xmit(skb);
-
- /* Temporarily stop the scheduler feeding us packets */
- netif_stop_queue(dev);
-
- /* Transfer data to DMA buffer */
- i = priv->tx_head;
- skb_copy_from_linear_data_offset(skb, 1, priv->tx_buf[i], skb->len - 1);
- priv->tx_len[i] = skb->len - 1;
-
- /* Clear interrupts while we touch our circular buffers */
-
- spin_lock_irqsave(&priv->ring_lock, flags);
- /* Move the ring buffer's head */
- priv->tx_head = (i + 1) % NUM_TX_BUF;
- priv->tx_count++;
-
- /* If we just filled up the last buffer, leave queue stopped.
- The higher layers must wait until we have a DMA buffer
- to accept the data. */
- if (priv->tx_count < NUM_TX_BUF)
- netif_wake_queue(dev);
-
- /* Set new TX state */
- if (priv->state == IDLE) {
- /* Assert RTS, start timer */
- priv->state = TX_HEAD;
- priv->tx_start = jiffies;
- write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8);
- write_scc(priv, R15, 0);
- start_timer(priv, priv->param.txdelay, 0);
- }
-
- /* Turn interrupts back on and free buffer */
- spin_unlock_irqrestore(&priv->ring_lock, flags);
- dev_kfree_skb(skb);
-
- return NETDEV_TX_OK;
-}
-
-
-static int scc_set_mac_address(struct net_device *dev, void *sa)
-{
- dev_addr_set(dev, ((struct sockaddr *)sa)->sa_data);
- return 0;
-}
-
-
-static inline void tx_on(struct scc_priv *priv)
-{
- int i, n;
- unsigned long flags;
-
- if (priv->param.dma >= 0) {
- n = (priv->chip == Z85230) ? 3 : 1;
- /* Program DMA controller */
- flags = claim_dma_lock();
- set_dma_mode(priv->param.dma, DMA_MODE_WRITE);
- set_dma_addr(priv->param.dma,
- virt_to_bus(priv->tx_buf[priv->tx_tail]) + n);
- set_dma_count(priv->param.dma,
- priv->tx_len[priv->tx_tail] - n);
- release_dma_lock(flags);
- /* Enable TX underrun interrupt */
- write_scc(priv, R15, TxUIE);
- /* Configure DREQ */
- if (priv->type == TYPE_TWIN)
- outb((priv->param.dma ==
- 1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3,
- priv->card_base + TWIN_DMA_CFG);
- else
- write_scc(priv, R1,
- EXT_INT_ENAB | WT_FN_RDYFN |
- WT_RDY_ENAB);
- /* Write first byte(s) */
- spin_lock_irqsave(priv->register_lock, flags);
- for (i = 0; i < n; i++)
- write_scc_data(priv,
- priv->tx_buf[priv->tx_tail][i], 1);
- enable_dma(priv->param.dma);
- spin_unlock_irqrestore(priv->register_lock, flags);
- } else {
- write_scc(priv, R15, TxUIE);
- write_scc(priv, R1,
- EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB);
- tx_isr(priv);
- }
- /* Reset EOM latch if we do not have the AUTOEOM feature */
- if (priv->chip == Z8530)
- write_scc(priv, R0, RES_EOM_L);
-}
-
-
-static inline void rx_on(struct scc_priv *priv)
-{
- unsigned long flags;
-
- /* Clear RX FIFO */
- while (read_scc(priv, R0) & Rx_CH_AV)
- read_scc_data(priv);
- priv->rx_over = 0;
- if (priv->param.dma >= 0) {
- /* Program DMA controller */
- flags = claim_dma_lock();
- set_dma_mode(priv->param.dma, DMA_MODE_READ);
- set_dma_addr(priv->param.dma,
- virt_to_bus(priv->rx_buf[priv->rx_head]));
- set_dma_count(priv->param.dma, BUF_SIZE);
- release_dma_lock(flags);
- enable_dma(priv->param.dma);
- /* Configure PackeTwin DMA */
- if (priv->type == TYPE_TWIN) {
- outb((priv->param.dma ==
- 1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3,
- priv->card_base + TWIN_DMA_CFG);
- }
- /* Sp. cond. intr. only, ext int enable, RX DMA enable */
- write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx |
- WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB);
- } else {
- /* Reset current frame */
- priv->rx_ptr = 0;
- /* Intr. on all Rx characters and Sp. cond., ext int enable */
- write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT |
- WT_FN_RDYFN);
- }
- write_scc(priv, R0, ERR_RES);
- write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB);
-}
-
-
-static inline void rx_off(struct scc_priv *priv)
-{
- /* Disable receiver */
- write_scc(priv, R3, Rx8);
- /* Disable DREQ / RX interrupt */
- if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
- outb(0, priv->card_base + TWIN_DMA_CFG);
- else
- write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
- /* Disable DMA */
- if (priv->param.dma >= 0)
- disable_dma(priv->param.dma);
-}
-
-
-static void start_timer(struct scc_priv *priv, int t, int r15)
-{
- outb(priv->tmr_mode, priv->tmr_ctrl);
- if (t == 0) {
- tm_isr(priv);
- } else if (t > 0) {
- outb(t & 0xFF, priv->tmr_cnt);
- outb((t >> 8) & 0xFF, priv->tmr_cnt);
- if (priv->type != TYPE_TWIN) {
- write_scc(priv, R15, r15 | CTSIE);
- priv->rr0 |= CTS;
- }
- }
-}
-
-
-static inline unsigned char random(void)
-{
- /* See "Numerical Recipes in C", second edition, p. 284 */
- rand = rand * 1664525L + 1013904223L;
- return (unsigned char) (rand >> 24);
-}
-
-static inline void z8530_isr(struct scc_info *info)
-{
- int is, i = 100;
-
- while ((is = read_scc(&info->priv[0], R3)) && i--) {
- if (is & CHARxIP) {
- rx_isr(&info->priv[0]);
- } else if (is & CHATxIP) {
- tx_isr(&info->priv[0]);
- } else if (is & CHAEXT) {
- es_isr(&info->priv[0]);
- } else if (is & CHBRxIP) {
- rx_isr(&info->priv[1]);
- } else if (is & CHBTxIP) {
- tx_isr(&info->priv[1]);
- } else {
- es_isr(&info->priv[1]);
- }
- write_scc(&info->priv[0], R0, RES_H_IUS);
- i++;
- }
- if (i < 0) {
- printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n",
- is);
- }
- /* Ok, no interrupts pending from this 8530. The INT line should
- be inactive now. */
-}
-
-
-static irqreturn_t scc_isr(int irq, void *dev_id)
-{
- struct scc_info *info = dev_id;
-
- spin_lock(info->priv[0].register_lock);
- /* At this point interrupts are enabled, and the interrupt under service
- is already acknowledged, but masked off.
-
- Interrupt processing: We loop until we know that the IRQ line is
- low. If another positive edge occurs afterwards during the ISR,
- another interrupt will be triggered by the interrupt controller
- as soon as the IRQ level is enabled again (see asm/irq.h).
-
- Bottom-half handlers will be processed after scc_isr(). This is
- important, since we only have small ringbuffers and want new data
- to be fetched/delivered immediately. */
-
- if (info->priv[0].type == TYPE_TWIN) {
- int is, card_base = info->priv[0].card_base;
- while ((is = ~inb(card_base + TWIN_INT_REG)) &
- TWIN_INT_MSK) {
- if (is & TWIN_SCC_MSK) {
- z8530_isr(info);
- } else if (is & TWIN_TMR1_MSK) {
- inb(card_base + TWIN_CLR_TMR1);
- tm_isr(&info->priv[0]);
- } else {
- inb(card_base + TWIN_CLR_TMR2);
- tm_isr(&info->priv[1]);
- }
- }
- } else
- z8530_isr(info);
- spin_unlock(info->priv[0].register_lock);
- return IRQ_HANDLED;
-}
-
-
-static void rx_isr(struct scc_priv *priv)
-{
- if (priv->param.dma >= 0) {
- /* Check special condition and perform error reset. See 2.4.7.5. */
- special_condition(priv, read_scc(priv, R1));
- write_scc(priv, R0, ERR_RES);
- } else {
- /* Check special condition for each character. Error reset not necessary.
- Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */
- int rc;
- while (read_scc(priv, R0) & Rx_CH_AV) {
- rc = read_scc(priv, R1);
- if (priv->rx_ptr < BUF_SIZE)
- priv->rx_buf[priv->rx_head][priv->
- rx_ptr++] =
- read_scc_data(priv);
- else {
- priv->rx_over = 2;
- read_scc_data(priv);
- }
- special_condition(priv, rc);
- }
- }
-}
-
-
-static void special_condition(struct scc_priv *priv, int rc)
-{
- int cb;
- unsigned long flags;
-
- /* See Figure 2-15. Only overrun and EOF need to be checked. */
-
- if (rc & Rx_OVR) {
- /* Receiver overrun */
- priv->rx_over = 1;
- if (priv->param.dma < 0)
- write_scc(priv, R0, ERR_RES);
- } else if (rc & END_FR) {
- /* End of frame. Get byte count */
- if (priv->param.dma >= 0) {
- flags = claim_dma_lock();
- cb = BUF_SIZE - get_dma_residue(priv->param.dma) -
- 2;
- release_dma_lock(flags);
- } else {
- cb = priv->rx_ptr - 2;
- }
- if (priv->rx_over) {
- /* We had an overrun */
- priv->dev->stats.rx_errors++;
- if (priv->rx_over == 2)
- priv->dev->stats.rx_length_errors++;
- else
- priv->dev->stats.rx_fifo_errors++;
- priv->rx_over = 0;
- } else if (rc & CRC_ERR) {
- /* Count invalid CRC only if packet length >= minimum */
- if (cb >= 15) {
- priv->dev->stats.rx_errors++;
- priv->dev->stats.rx_crc_errors++;
- }
- } else {
- if (cb >= 15) {
- if (priv->rx_count < NUM_RX_BUF - 1) {
- /* Put good frame in FIFO */
- priv->rx_len[priv->rx_head] = cb;
- priv->rx_head =
- (priv->rx_head +
- 1) % NUM_RX_BUF;
- priv->rx_count++;
- schedule_work(&priv->rx_work);
- } else {
- priv->dev->stats.rx_errors++;
- priv->dev->stats.rx_over_errors++;
- }
- }
- }
- /* Get ready for new frame */
- if (priv->param.dma >= 0) {
- flags = claim_dma_lock();
- set_dma_addr(priv->param.dma,
- virt_to_bus(priv->rx_buf[priv->rx_head]));
- set_dma_count(priv->param.dma, BUF_SIZE);
- release_dma_lock(flags);
- } else {
- priv->rx_ptr = 0;
- }
- }
-}
-
-
-static void rx_bh(struct work_struct *ugli_api)
-{
- struct scc_priv *priv = container_of(ugli_api, struct scc_priv, rx_work);
- int i = priv->rx_tail;
- int cb;
- unsigned long flags;
- struct sk_buff *skb;
- unsigned char *data;
-
- spin_lock_irqsave(&priv->ring_lock, flags);
- while (priv->rx_count) {
- spin_unlock_irqrestore(&priv->ring_lock, flags);
- cb = priv->rx_len[i];
- /* Allocate buffer */
- skb = dev_alloc_skb(cb + 1);
- if (skb == NULL) {
- /* Drop packet */
- priv->dev->stats.rx_dropped++;
- } else {
- /* Fill buffer */
- data = skb_put(skb, cb + 1);
- data[0] = 0;
- memcpy(&data[1], priv->rx_buf[i], cb);
- skb->protocol = ax25_type_trans(skb, priv->dev);
- netif_rx(skb);
- priv->dev->stats.rx_packets++;
- priv->dev->stats.rx_bytes += cb;
- }
- spin_lock_irqsave(&priv->ring_lock, flags);
- /* Move tail */
- priv->rx_tail = i = (i + 1) % NUM_RX_BUF;
- priv->rx_count--;
- }
- spin_unlock_irqrestore(&priv->ring_lock, flags);
-}
-
-
-static void tx_isr(struct scc_priv *priv)
-{
- int i = priv->tx_tail, p = priv->tx_ptr;
-
- /* Suspend TX interrupts if we don't want to send anything.
- See Figure 2-22. */
- if (p == priv->tx_len[i]) {
- write_scc(priv, R0, RES_Tx_P);
- return;
- }
-
- /* Write characters */
- while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) {
- write_scc_data(priv, priv->tx_buf[i][p++], 0);
- }
-
- /* Reset EOM latch of Z8530 */
- if (!priv->tx_ptr && p && priv->chip == Z8530)
- write_scc(priv, R0, RES_EOM_L);
-
- priv->tx_ptr = p;
-}
-
-
-static void es_isr(struct scc_priv *priv)
-{
- int i, rr0, drr0, res;
- unsigned long flags;
-
- /* Read status, reset interrupt bit (open latches) */
- rr0 = read_scc(priv, R0);
- write_scc(priv, R0, RES_EXT_INT);
- drr0 = priv->rr0 ^ rr0;
- priv->rr0 = rr0;
-
- /* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since
- it might have already been cleared again by AUTOEOM. */
- if (priv->state == TX_DATA) {
- /* Get remaining bytes */
- i = priv->tx_tail;
- if (priv->param.dma >= 0) {
- disable_dma(priv->param.dma);
- flags = claim_dma_lock();
- res = get_dma_residue(priv->param.dma);
- release_dma_lock(flags);
- } else {
- res = priv->tx_len[i] - priv->tx_ptr;
- priv->tx_ptr = 0;
- }
- /* Disable DREQ / TX interrupt */
- if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
- outb(0, priv->card_base + TWIN_DMA_CFG);
- else
- write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
- if (res) {
- /* Update packet statistics */
- priv->dev->stats.tx_errors++;
- priv->dev->stats.tx_fifo_errors++;
- /* Other underrun interrupts may already be waiting */
- write_scc(priv, R0, RES_EXT_INT);
- write_scc(priv, R0, RES_EXT_INT);
- } else {
- /* Update packet statistics */
- priv->dev->stats.tx_packets++;
- priv->dev->stats.tx_bytes += priv->tx_len[i];
- /* Remove frame from FIFO */
- priv->tx_tail = (i + 1) % NUM_TX_BUF;
- priv->tx_count--;
- /* Inform upper layers */
- netif_wake_queue(priv->dev);
- }
- /* Switch state */
- write_scc(priv, R15, 0);
- if (priv->tx_count &&
- time_is_after_jiffies(priv->tx_start + priv->param.txtimeout)) {
- priv->state = TX_PAUSE;
- start_timer(priv, priv->param.txpause, 0);
- } else {
- priv->state = TX_TAIL;
- start_timer(priv, priv->param.txtail, 0);
- }
- }
-
- /* DCD transition */
- if (drr0 & DCD) {
- if (rr0 & DCD) {
- switch (priv->state) {
- case IDLE:
- case WAIT:
- priv->state = DCD_ON;
- write_scc(priv, R15, 0);
- start_timer(priv, priv->param.dcdon, 0);
- }
- } else {
- switch (priv->state) {
- case RX_ON:
- rx_off(priv);
- priv->state = DCD_OFF;
- write_scc(priv, R15, 0);
- start_timer(priv, priv->param.dcdoff, 0);
- }
- }
- }
-
- /* CTS transition */
- if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN)
- tm_isr(priv);
-
-}
-
-
-static void tm_isr(struct scc_priv *priv)
-{
- switch (priv->state) {
- case TX_HEAD:
- case TX_PAUSE:
- tx_on(priv);
- priv->state = TX_DATA;
- break;
- case TX_TAIL:
- write_scc(priv, R5, TxCRC_ENAB | Tx8);
- priv->state = RTS_OFF;
- if (priv->type != TYPE_TWIN)
- write_scc(priv, R15, 0);
- start_timer(priv, priv->param.rtsoff, 0);
- break;
- case RTS_OFF:
- write_scc(priv, R15, DCDIE);
- priv->rr0 = read_scc(priv, R0);
- if (priv->rr0 & DCD) {
- priv->dev->stats.collisions++;
- rx_on(priv);
- priv->state = RX_ON;
- } else {
- priv->state = WAIT;
- start_timer(priv, priv->param.waittime, DCDIE);
- }
- break;
- case WAIT:
- if (priv->tx_count) {
- priv->state = TX_HEAD;
- priv->tx_start = jiffies;
- write_scc(priv, R5,
- TxCRC_ENAB | RTS | TxENAB | Tx8);
- write_scc(priv, R15, 0);
- start_timer(priv, priv->param.txdelay, 0);
- } else {
- priv->state = IDLE;
- if (priv->type != TYPE_TWIN)
- write_scc(priv, R15, DCDIE);
- }
- break;
- case DCD_ON:
- case DCD_OFF:
- write_scc(priv, R15, DCDIE);
- priv->rr0 = read_scc(priv, R0);
- if (priv->rr0 & DCD) {
- rx_on(priv);
- priv->state = RX_ON;
- } else {
- priv->state = WAIT;
- start_timer(priv,
- random() / priv->param.persist *
- priv->param.slottime, DCDIE);
- }
- break;
- }
-}