summaryrefslogtreecommitdiff
path: root/drivers/net/phy/at803x.c
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@armlinux.org.uk>2021-07-20 16:33:49 +0300
committerDavid S. Miller <davem@davemloft.net>2021-07-20 17:27:01 +0300
commit8887ca5474bd9ddb56cabc88856bb035774e0041 (patch)
tree80164db7094202dcd914e970ed4c7f69c6ec92f4 /drivers/net/phy/at803x.c
parentfa660684e5319a5c37deaf4a329d8026b52d64e7 (diff)
downloadlinux-8887ca5474bd9ddb56cabc88856bb035774e0041.tar.xz
net: phy: at803x: simplify custom phy id matching
The at803x driver contains a function, at803x_match_phy_id(), which tests whether the PHY ID matches the value passed, comparing phy_id with phydev->phy_id and testing all bits that in the driver's mask. This is the same test that is used to match the driver, with phy_id replaced with the driver specified ID, phydev->drv->phy_id. Hence, we already know the value of the bits being tested if we look at phydev->drv->phy_id directly, and we do not require a complicated test to check them. Test directly against phydev->drv->phy_id instead. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/at803x.c')
-rw-r--r--drivers/net/phy/at803x.c16
1 files changed, 5 insertions, 11 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5d62b85a4024..0790ffcd3db6 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -532,12 +532,6 @@ static int at8031_register_regulators(struct phy_device *phydev)
return 0;
}
-static bool at803x_match_phy_id(struct phy_device *phydev, u32 phy_id)
-{
- return (phydev->phy_id & phydev->drv->phy_id_mask)
- == (phy_id & phydev->drv->phy_id_mask);
-}
-
static int at803x_parse_dt(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
@@ -602,8 +596,8 @@ static int at803x_parse_dt(struct phy_device *phydev)
* to the AR8030 so there might be a good chance it works on
* the AR8030 too.
*/
- if (at803x_match_phy_id(phydev, ATH8030_PHY_ID) ||
- at803x_match_phy_id(phydev, ATH8035_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8030_PHY_ID ||
+ phydev->drv->phy_id == ATH8035_PHY_ID) {
priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
}
@@ -631,7 +625,7 @@ static int at803x_parse_dt(struct phy_device *phydev)
/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
* options.
*/
- if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
if (of_property_read_bool(node, "qca,keep-pll-enabled"))
priv->flags |= AT803X_KEEP_PLL_ENABLED;
@@ -676,7 +670,7 @@ static int at803x_probe(struct phy_device *phydev)
* Switch to the copper page, as otherwise we read
* the PHY capabilities from the fiber side.
*/
- if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
phy_lock_mdio_bus(phydev);
ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
phy_unlock_mdio_bus(phydev);
@@ -820,7 +814,7 @@ static int at803x_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
ret = at8031_pll_config(phydev);
if (ret < 0)
return ret;