Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf.

  Quite a handful of old regression fixes but most of those are
  pre-5.16.

  Current release - regressions:

   - fix memory leaks in the skb free deferral scheme if upper layer
     protocols are used, i.e. in-kernel TCP readers like TLS

  Current release - new code bugs:

   - nf_tables: fix NULL check typo in _clone() functions

   - change the default to y for Vertexcom vendor Kconfig

   - a couple of fixes to incorrect uses of ref tracking

   - two fixes for constifying netdev->dev_addr

  Previous releases - regressions:

   - bpf:
      - various verifier fixes mainly around register offset handling
        when passed to helper functions
      - fix mount source displayed for bpffs (none -> bpffs)

   - bonding:
      - fix extraction of ports for connection hash calculation
      - fix bond_xmit_broadcast return value when some devices are down

   - phy: marvell: add Marvell specific PHY loopback

   - sch_api: don't skip qdisc attach on ingress, prevent ref leak

   - htb: restore minimal packet size handling in rate control

   - sfp: fix high power modules without diagnostic monitoring

   - mscc: ocelot:
      - don't let phylink re-enable TX PAUSE on the NPI port
      - don't dereference NULL pointers with shared tc filters

   - smsc95xx: correct reset handling for LAN9514

   - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

   - phy: micrel: use kszphy_suspend/_resume for irq aware devices,
     avoid races with the interrupt

  Previous releases - always broken:

   - xdp: check prog type before updating BPF link

   - smc: resolve various races around abnormal connection termination

   - sit: allow encapsulated IPv6 traffic to be delivered locally

   - axienet: fix init/reset handling, add missing barriers, read the
     right status words, stop queues correctly

   - add missing dev_put() in sock_timestamping_bind_phc()

  Misc:

   - ipv4: prevent accidentally passing RTO_ONLINK to
     ip_route_output_key_hash() by sanitizing flags

   - ipv4: avoid quadratic behavior in netns dismantle

   - stmmac: dwmac-oxnas: add support for OX810SE

   - fsl: xgmac_mdio: add workaround for erratum A-009885"

* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
  ipv4: avoid quadratic behavior in netns dismantle
  net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
  powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
  dt-bindings: net: Document fsl,erratum-a009885
  net/fsl: xgmac_mdio: Add workaround for erratum A-009885
  net: mscc: ocelot: fix using match before it is set
  net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
  net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
  nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
  net: axienet: increase default TX ring size to 128
  net: axienet: fix for TX busy handling
  net: axienet: fix number of TX ring slots for available check
  net: axienet: Fix TX ring slot available check
  net: axienet: limit minimum TX ring size
  net: axienet: add missing memory barriers
  net: axienet: reset core on initialization prior to MDIO access
  net: axienet: Wait for PhyRstCmplt after core reset
  net: axienet: increase reset timeout
  bpf, selftests: Add ringbuf memory type confusion test
  ...

1 files changed, 55 insertions, 1 deletions

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 739859c0dfb1..fa71fb7a66b5 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -189,6 +189,8 @@
 #define MII_88E1510_GEN_CTRL_REG_1_MODE_RGMII_SGMII	0x4
 #define MII_88E1510_GEN_CTRL_REG_1_RESET	0x8000	/* Soft reset */
 
+#define MII_88E1510_MSCR_2		0x15
+
 #define MII_VCT5_TX_RX_MDI0_COUPLING	0x10
 #define MII_VCT5_TX_RX_MDI1_COUPLING	0x11
 #define MII_VCT5_TX_RX_MDI2_COUPLING	0x12
@@ -1932,6 +1934,58 @@ static void marvell_get_stats(struct phy_device *phydev,
 		data[i] = marvell_get_stat(phydev, i);
 }
 
+static int m88e1510_loopback(struct phy_device *phydev, bool enable)
+{
+	int err;
+
+	if (enable) {
+		u16 bmcr_ctl = 0, mscr2_ctl = 0;
+
+		if (phydev->speed == SPEED_1000)
+			bmcr_ctl = BMCR_SPEED1000;
+		else if (phydev->speed == SPEED_100)
+			bmcr_ctl = BMCR_SPEED100;
+
+		if (phydev->duplex == DUPLEX_FULL)
+			bmcr_ctl |= BMCR_FULLDPLX;
+
+		err = phy_write(phydev, MII_BMCR, bmcr_ctl);
+		if (err < 0)
+			return err;
+
+		if (phydev->speed == SPEED_1000)
+			mscr2_ctl = BMCR_SPEED1000;
+		else if (phydev->speed == SPEED_100)
+			mscr2_ctl = BMCR_SPEED100;
+
+		err = phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
+				       MII_88E1510_MSCR_2, BMCR_SPEED1000 |
+				       BMCR_SPEED100, mscr2_ctl);
+		if (err < 0)
+			return err;
+
+		/* Need soft reset to have speed configuration takes effect */
+		err = genphy_soft_reset(phydev);
+		if (err < 0)
+			return err;
+
+		/* FIXME: Based on trial and error test, it seem 1G need to have
+		 * delay between soft reset and loopback enablement.
+		 */
+		if (phydev->speed == SPEED_1000)
+			msleep(1000);
+
+		return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
+				  BMCR_LOOPBACK);
+	} else {
+		err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0);
+		if (err < 0)
+			return err;
+
+		return phy_config_aneg(phydev);
+	}
+}
+
 static int marvell_vct5_wait_complete(struct phy_device *phydev)
 {
 	int i;
@@ -3078,7 +3132,7 @@ static struct phy_driver marvell_drivers[] = {
 		.get_sset_count = marvell_get_sset_count,
 		.get_strings = marvell_get_strings,
 		.get_stats = marvell_get_stats,
-		.set_loopback = genphy_loopback,
+		.set_loopback = m88e1510_loopback,
 		.get_tunable = m88e1011_get_tunable,
 		.set_tunable = m88e1011_set_tunable,
 		.cable_test_start = marvell_vct7_cable_test_start,