diff options
| author | Christian Marangi <ansuelsmth@gmail.com> | 2023-12-08 17:51:54 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2023-12-13 13:34:28 +0300 |
| commit | 3ae3bc426eaf57ca8f53d75777d9a5ef779bc7b7 (patch) | |
| tree | edaf9d804b3ca7011ec0aa6f46e60b0a779edb43 /drivers/net/phy | |
| parent | 25d2ba94005fac18fe68878cddff59a67e115554 (diff) | |
| download | linux-3ae3bc426eaf57ca8f53d75777d9a5ef779bc7b7.tar.xz | |
net: phy: at803x: move specific at8031 config_init to dedicated function
Move specific at8031 config_init to dedicated function to make
at803x_config_init more generic and tidy things up.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/at803x.c | 45 |
1 files changed, 25 insertions, 20 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 6cb41af31818..e2bf5a16ba3c 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -951,27 +951,8 @@ static int at803x_hibernation_mode_config(struct phy_device *phydev) static int at803x_config_init(struct phy_device *phydev) { - struct at803x_priv *priv = phydev->priv; int ret; - if (phydev->drv->phy_id == ATH8031_PHY_ID) { - /* Some bootloaders leave the fiber page selected. - * Switch to the appropriate page (fiber or copper), as otherwise we - * read the PHY capabilities from the wrong page. - */ - phy_lock_mdio_bus(phydev); - ret = at803x_write_page(phydev, - priv->is_fiber ? AT803X_PAGE_FIBER : - AT803X_PAGE_COPPER); - phy_unlock_mdio_bus(phydev); - if (ret) - return ret; - - ret = at8031_pll_config(phydev); - if (ret < 0) - return ret; - } - /* The RX and TX delay default is: * after HW reset: RX delay enabled and TX delay disabled * after SW reset: RX delay enabled, while TX delay retains the @@ -1604,6 +1585,30 @@ static int at8031_probe(struct phy_device *phydev) AT803X_WOL_EN, 0); } +static int at8031_config_init(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + int ret; + + /* Some bootloaders leave the fiber page selected. + * Switch to the appropriate page (fiber or copper), as otherwise we + * read the PHY capabilities from the wrong page. + */ + phy_lock_mdio_bus(phydev); + ret = at803x_write_page(phydev, + priv->is_fiber ? AT803X_PAGE_FIBER : + AT803X_PAGE_COPPER); + phy_unlock_mdio_bus(phydev); + if (ret) + return ret; + + ret = at8031_pll_config(phydev); + if (ret < 0) + return ret; + + return at803x_config_init(phydev); +} + static int qca83xx_config_init(struct phy_device *phydev) { u8 switch_revision; @@ -2113,7 +2118,7 @@ static struct phy_driver at803x_driver[] = { .name = "Qualcomm Atheros AR8031/AR8033", .flags = PHY_POLL_CABLE_TEST, .probe = at8031_probe, - .config_init = at803x_config_init, + .config_init = at8031_config_init, .config_aneg = at803x_config_aneg, .soft_reset = genphy_soft_reset, .set_wol = at803x_set_wol, |