diff options
| author | Anilkumar Kolli <quic_akolli@quicinc.com> | 2023-07-26 17:10:31 +0300 |
|---|---|---|
| committer | Kalle Valo <quic_kvalo@quicinc.com> | 2023-08-02 19:49:39 +0300 |
| commit | bdfc967bf5fcd762473a01d39edb81f1165ba290 (patch) | |
| tree | c75a54f7777eb6181a9f99e2acd580910a0c3f2f /drivers/net/wireless/ath/ath11k/ahb.c | |
| parent | 011e5a3052a22d3758d17442bf0c04c68bf79bea (diff) | |
| download | linux-bdfc967bf5fcd762473a01d39edb81f1165ba290.tar.xz | |
wifi: ath11k: Add coldboot calibration support for QCN9074
QCN9074 supports 6 GHz, which has increased number of channels
compared to 5 GHz/2 GHz. So, to support coldboot calibration in
QCN9074 ATH11K_COLD_BOOT_FW_RESET_DELAY extended to 60 seconds. To
avoid code redundancy, fwreset_from_cold_boot moved to QMI and made
common for both ahb and pci. Coldboot calibration is enabled only in
FTM mode for QCN9074. QCN9074 requires firmware restart after coldboot,
hence enable cbcal_restart_fw in hw_params.
This support can be enabled/disabled using hw params for different
hardware. Currently it is not enabled for QCA6390.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726141032.3061-3-quic_rajkbhag@quicinc.com
Diffstat (limited to 'drivers/net/wireless/ath/ath11k/ahb.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath11k/ahb.c | 28 |
1 files changed, 2 insertions, 26 deletions
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c index 56aea2bc9787..b0a40970bada 100644 --- a/drivers/net/wireless/ath/ath11k/ahb.c +++ b/drivers/net/wireless/ath/ath11k/ahb.c @@ -14,6 +14,7 @@ #include "ahb.h" #include "debug.h" #include "hif.h" +#include "qmi.h" #include <linux/remoteproc.h> #include "pcic.h" #include <linux/soc/qcom/smem.h> @@ -419,31 +420,6 @@ static void ath11k_ahb_power_down(struct ath11k_base *ab) rproc_shutdown(ab_ahb->tgt_rproc); } -static int ath11k_ahb_fwreset_from_cold_boot(struct ath11k_base *ab) -{ - int timeout; - - if (!ath11k_core_coldboot_cal_support(ab) || ab->qmi.cal_done || - ab->hw_params.cbcal_restart_fw == 0) - return 0; - - ath11k_dbg(ab, ATH11K_DBG_AHB, "wait for cold boot done\n"); - timeout = wait_event_timeout(ab->qmi.cold_boot_waitq, - (ab->qmi.cal_done == 1), - ATH11K_COLD_BOOT_FW_RESET_DELAY); - if (timeout <= 0) { - ath11k_cold_boot_cal = 0; - ath11k_warn(ab, "Coldboot Calibration failed timed out\n"); - } - - /* reset the firmware */ - ath11k_ahb_power_down(ab); - ath11k_ahb_power_up(ab); - - ath11k_dbg(ab, ATH11K_DBG_AHB, "exited from cold boot mode\n"); - return 0; -} - static void ath11k_ahb_init_qmi_ce_config(struct ath11k_base *ab) { struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg; @@ -1226,7 +1202,7 @@ static int ath11k_ahb_probe(struct platform_device *pdev) goto err_ce_free; } - ath11k_ahb_fwreset_from_cold_boot(ab); + ath11k_qmi_fwreset_from_cold_boot(ab); return 0; |