diff options
| author | Govindaraj Saminathan <quic_gsaminat@quicinc.com> | 2023-05-26 12:41:07 +0300 |
|---|---|---|
| committer | Kalle Valo <quic_kvalo@quicinc.com> | 2023-06-01 13:30:49 +0300 |
| commit | b43310e44edc823a7f02af1e1e2b4e8a9abc7d91 (patch) | |
| tree | b28fadff6883d0d90ef2214e9eddb2088de4048b /drivers/net/wireless/ath/ath11k/testmode_i.h | |
| parent | 86f85575a3f6a20cef1c8bb98e78585fe3a53ccc (diff) | |
| download | linux-b43310e44edc823a7f02af1e1e2b4e8a9abc7d91.tar.xz | |
wifi: ath11k: factory test mode support
Add support to process factory test mode commands (FTM) for calibration.
By default firmware start with NORMAL mode and to process the FTM commands
firmware needs to be restarted in FTM mode using module parameter ftm_mode.
The pre-request is all the radios should be down before starting the test.
When start command ATH11K_TM_CMD_TESTMODE_START is received, ar->state
is set to Test Mode. If the FTM command or event length is greater
than 256 bytes, it will be broken down into multiple segments and
encoded with TLV header if it is segmented commands, else it is sent
to firmware as it is.
On receiving UTF event from firmware, if it is segmented event, the driver
will wait until it receives all the segments and notify the complete
data to user application. In case the segmented sequence are missed or
lost from the firmware, driver will skip the already received partial data.
In case of unsegmented UTF event from firmware, driver notifies the
data to the user application as it comes. Applications handles
the data further.
Command to boot in ftm mode:
insmod ath11k ftm_mode=1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230517135934.16408-4-quic_rajkbhag@quicinc.com
Diffstat (limited to 'drivers/net/wireless/ath/ath11k/testmode_i.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath11k/testmode_i.h | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath11k/testmode_i.h b/drivers/net/wireless/ath/ath11k/testmode_i.h index 4bae2a9eeea4..91b83873d660 100644 --- a/drivers/net/wireless/ath/ath11k/testmode_i.h +++ b/drivers/net/wireless/ath/ath11k/testmode_i.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. */ /* "API" level of the ath11k testmode interface. Bump it after every @@ -11,9 +12,10 @@ /* Bump this after every _compatible_ interface change, for example * addition of a new command or an attribute. */ -#define ATH11K_TESTMODE_VERSION_MINOR 0 +#define ATH11K_TESTMODE_VERSION_MINOR 1 #define ATH11K_TM_DATA_MAX_LEN 5000 +#define ATH11K_FTM_EVENT_MAX_BUF_LENGTH 2048 enum ath11k_tm_attr { __ATH11K_TM_ATTR_INVALID = 0, @@ -47,4 +49,18 @@ enum ath11k_tm_cmd { * ATH11K_TM_ATTR_DATA. */ ATH11K_TM_CMD_WMI = 1, + + /* Boots the UTF firmware, the netdev interface must be down at the + * time. + */ + ATH11K_TM_CMD_TESTMODE_START = 2, + + /* The command used to transmit a FTM WMI command to the firmware + * and the event to receive WMI events from the firmware. The data + * received only contain the payload, need to add the tlv header + * and send the cmd to firmware with command id WMI_PDEV_UTF_CMDID. + * The data payload size could be large and the driver needs to + * send segmented data to firmware. + */ + ATH11K_TM_CMD_WMI_FTM = 3, }; |