ath11k: Add WoW net-detect functionality

Implement net-detect feature by setting flag
WIPHY_WOWLAN_NET_DETECT if firmware supports this
feature. Driver sets the related PNO configuration
to firmware before entering WoW and firmware then
scans periodically and wakes up host if a specific
SSID is found.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1644308006-22784-3-git-send-email-quic_cjhuang@quicinc.com

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index b82f432a3d95..9150e0555c6d 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -5616,6 +5616,173 @@ struct wmi_wow_del_pattern_cmd {
 	u32 pattern_type;
 } __packed;
 
+#define WMI_PNO_MAX_SCHED_SCAN_PLANS      2
+#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   7200
+#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
+#define WMI_PNO_MAX_NETW_CHANNELS         26
+#define WMI_PNO_MAX_NETW_CHANNELS_EX      60
+#define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID
+#define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN
+
+/* size based of dot11 declaration without extra IEs as we will not carry those for PNO */
+#define WMI_PNO_MAX_PB_REQ_SIZE    450
+
+#define WMI_PNO_24G_DEFAULT_CH     1
+#define WMI_PNO_5G_DEFAULT_CH      36
+
+#define WMI_ACTIVE_MAX_CHANNEL_TIME 40
+#define WMI_PASSIVE_MAX_CHANNEL_TIME   110
+
+/* SSID broadcast type */
+enum wmi_ssid_bcast_type {
+	BCAST_UNKNOWN      = 0,
+	BCAST_NORMAL       = 1,
+	BCAST_HIDDEN       = 2,
+};
+
+#define WMI_NLO_MAX_SSIDS    16
+#define WMI_NLO_MAX_CHAN     48
+
+#define WMI_NLO_CONFIG_STOP                             BIT(0)
+#define WMI_NLO_CONFIG_START                            BIT(1)
+#define WMI_NLO_CONFIG_RESET                            BIT(2)
+#define WMI_NLO_CONFIG_SLOW_SCAN                        BIT(4)
+#define WMI_NLO_CONFIG_FAST_SCAN                        BIT(5)
+#define WMI_NLO_CONFIG_SSID_HIDE_EN                     BIT(6)
+
+/* This bit is used to indicate if EPNO or supplicant PNO is enabled.
+ * Only one of them can be enabled at a given time
+ */
+#define WMI_NLO_CONFIG_ENLO                             BIT(7)
+#define WMI_NLO_CONFIG_SCAN_PASSIVE                     BIT(8)
+#define WMI_NLO_CONFIG_ENLO_RESET                       BIT(9)
+#define WMI_NLO_CONFIG_SPOOFED_MAC_IN_PROBE_REQ         BIT(10)
+#define WMI_NLO_CONFIG_RANDOM_SEQ_NO_IN_PROBE_REQ       BIT(11)
+#define WMI_NLO_CONFIG_ENABLE_IE_WHITELIST_IN_PROBE_REQ BIT(12)
+#define WMI_NLO_CONFIG_ENABLE_CNLO_RSSI_CONFIG          BIT(13)
+
+struct wmi_nlo_ssid_param {
+	u32 valid;
+	struct wmi_ssid ssid;
+} __packed;
+
+struct wmi_nlo_enc_param {
+	u32 valid;
+	u32 enc_type;
+} __packed;
+
+struct wmi_nlo_auth_param {
+	u32 valid;
+	u32 auth_type;
+} __packed;
+
+struct wmi_nlo_bcast_nw_param {
+	u32 valid;
+	u32 bcast_nw_type;
+} __packed;
+
+struct wmi_nlo_rssi_param {
+	u32 valid;
+	s32 rssi;
+} __packed;
+
+struct nlo_configured_parameters {
+	/* TLV tag and len;*/
+	u32 tlv_header;
+	struct wmi_nlo_ssid_param ssid;
+	struct wmi_nlo_enc_param enc_type;
+	struct wmi_nlo_auth_param auth_type;
+	struct wmi_nlo_rssi_param rssi_cond;
+
+	/* indicates if the SSID is hidden or not */
+	struct wmi_nlo_bcast_nw_param bcast_nw_type;
+} __packed;
+
+struct wmi_network_type {
+	struct wmi_ssid ssid;
+	u32 authentication;
+	u32 encryption;
+	u32 bcast_nw_type;
+	u8 channel_count;
+	u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
+	s32 rssi_threshold;
+};
+
+struct wmi_pno_scan_req {
+	u8 enable;
+	u8 vdev_id;
+	u8 uc_networks_count;
+	struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
+	u32 fast_scan_period;
+	u32 slow_scan_period;
+	u8 fast_scan_max_cycles;
+
+	bool do_passive_scan;
+
+	u32 delay_start_time;
+	u32 active_min_time;
+	u32 active_max_time;
+	u32 passive_min_time;
+	u32 passive_max_time;
+
+	/* mac address randomization attributes */
+	u32 enable_pno_scan_randomization;
+	u8 mac_addr[ETH_ALEN];
+	u8 mac_addr_mask[ETH_ALEN];
+};
+
+struct wmi_wow_nlo_config_cmd {
+	u32 tlv_header;
+	u32 flags;
+	u32 vdev_id;
+	u32 fast_scan_max_cycles;
+	u32 active_dwell_time;
+	u32 passive_dwell_time;
+	u32 probe_bundle_size;
+
+	/* ART = IRT */
+	u32 rest_time;
+
+	/* Max value that can be reached after SBM */
+	u32 max_rest_time;
+
+	/* SBM */
+	u32 scan_backoff_multiplier;
+
+	/* SCBM */
+	u32 fast_scan_period;
+
+	/* specific to windows */
+	u32 slow_scan_period;
+
+	u32 no_of_ssids;
+
+	u32 num_of_channels;
+
+	/* NLO scan start delay time in milliseconds */
+	u32 delay_start_time;
+
+	/* MAC Address to use in Probe Req as SA */
+	struct wmi_mac_addr mac_addr;
+
+	/* Mask on which MAC has to be randomized */
+	struct wmi_mac_addr mac_mask;
+
+	/* IE bitmap to use in Probe Req */
+	u32 ie_bitmap[8];
+
+	/* Number of vendor OUIs. In the TLV vendor_oui[] */
+	u32 num_vendor_oui;
+
+	/* Number of connected NLO band preferences */
+	u32 num_cnlo_band_pref;
+
+	/* The TLVs will follow.
+	 * nlo_configured_parameters nlo_list[];
+	 * u32 channel_list[num_of_channels];
+	 */
+} __packed;
+
 int ath11k_wmi_cmd_send(struct ath11k_pdev_wmi *wmi, struct sk_buff *skb,
 			u32 cmd_id);
 struct sk_buff *ath11k_wmi_alloc_skb(struct ath11k_wmi_base *wmi_sc, u32 len);
@@ -5777,6 +5944,8 @@ int ath11k_wmi_scan_prob_req_oui(struct ath11k *ar,
 				 const u8 mac_addr[ETH_ALEN]);
 int ath11k_wmi_fw_dbglog_cfg(struct ath11k *ar, u32 *module_id_bitmap,
 			     struct ath11k_fw_dbglog *dbglog);
+int ath11k_wmi_wow_config_pno(struct ath11k *ar, u32 vdev_id,
+			      struct wmi_pno_scan_req  *pno_scan);
 int ath11k_wmi_wow_del_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id);
 int ath11k_wmi_wow_add_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id,
 			       const u8 *pattern, const u8 *mask,