Merge tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.4

Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.

Major changes:

cfg80211/mac80211
 - fix some Fine Time Measurement (FTM) frames not being bufferable
 - flush frames before key removal to avoid potential unencrypted
   transmission depending on the hardware design

iwlwifi
 - preparation for Wi-Fi 7 EHT and multi-link support

rtw88
 - SDIO bus support
 - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support

rtw89
 - framework firmware backwards compatibility

brcmfmac
 - Cypress 43439 SDIO support

mt76
 - mt7921 P2P support
 - mt7996 mesh A-MSDU support
 - mt7996 EHT support
 - mt7996 coredump support

wcn36xx
 - support for pronto v3 hardware

ath11k
 - PCIe DeviceTree bindings
 - WCN6750: enable SAR support

ath10k
 - convert DeviceTree bindings to YAML

* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
  wifi: rtw88: Update spelling in main.h
  wifi: airo: remove ISA_DMA_API dependency
  wifi: rtl8xxxu: Simplify setting the initial gain
  wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
  wifi: rtl8xxxu: Don't print the vendor/product/serial
  wifi: rtw88: Fix memory leak in rtw88_usb
  wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
  wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
  wifi: rtw88: rtw8821c: Fix rfe_option field width
  wifi: rtw88: usb: fix priority queue to endpoint mapping
  wifi: rtw88: 8822c: add iface combination
  wifi: rtw88: handle station mode concurrent scan with AP mode
  wifi: rtw88: prevent scan abort with other VIFs
  wifi: rtw88: refine reserved page flow for AP mode
  wifi: rtw88: disallow PS during AP mode
  wifi: rtw88: 8822c: extend reserved page number
  wifi: rtw88: add port switch for AP mode
  wifi: rtw88: add bitmap for dynamic port settings
  wifi: rtw89: mac: use regular int as return type of DLE buffer request
  wifi: mac80211: remove return value check of debugfs_create_dir()
  ...
====================

Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 8 insertions, 1 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 65d4799a5658..ff710b0b5071 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -965,6 +965,12 @@ out:
 		.driver_data = BRCMF_FWVENDOR_ ## fw_vend \
 	}
 
+#define CYW_SDIO_DEVICE(dev_id, fw_vend) \
+	{ \
+		SDIO_DEVICE(SDIO_VENDOR_ID_CYPRESS, dev_id), \
+		.driver_data = BRCMF_FWVENDOR_ ## fw_vend \
+	}
+
 /* devices we support, null terminated */
 static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43143, WCC),
@@ -979,6 +985,7 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4335_4339, WCC),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4339, WCC),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43430, WCC),
+	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43439, WCC),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4345, WCC),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_43455, WCC),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4354, WCC),
@@ -986,9 +993,9 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_4359, WCC),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_4373, CYW),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43012, CYW),
-	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43439, CYW),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752, CYW),
 	BRCMF_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_89359, CYW),
+	CYW_SDIO_DEVICE(SDIO_DEVICE_ID_BROADCOM_CYPRESS_43439, CYW),
 	{ /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);