Merge branch 'pci/controller/endpoint'

- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different
  from "PCI Endpoint NTB driver" (Shunsuke Mie)

- Automatically create a function specific attributes group for endpoint
  drivers to avoid reference counting issues (Damien Le Moal)

- Move and unexport pci_epf_type_add_cfs() (Damien Le Moal)

- Reinitialize EPF test DMA transfer completion before submitting it to
  avoid losing the completion notification (Damien Le Moal)

- Fix EPF test DMA transfer completion detection (Damien Le Moal)

- Submit EPF test DMA transfers with dmaengine_submit(), not tx_submit()
  (Damien Le Moal)

- Simplify EPF test read/write/copy functions (Damien Le Moal)

- Simplify EPF test "raise IRQ" interface (Damien Le Moal)

- Simplify EPF test IRQ command execution (Damien Le Moal)

- Improve EPF test command/status register handling (Damien Le Moal)

- Free IRQs before removing device (Damien Le Moal)

- Reinitialize IRQ completions for every test (Damien Le Moal)

- Don't write status in IRQ handler to avoid race (Damien Le Moal)

- Fix dma_chan direction in data transfer test (Yoshihiro Shimoda)

- Return pci_epf_type_add_cfs() error if EPF has no driver (Damien Le Moal)

- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI
  vector parameters (Manivannan Sadhasivam)

- Pass EPF device ID to driver probe functions (Manivannan Sadhasivam)

- Return -EALREADY if EPC has already been started/stopped (Manivannan
  Sadhasivam)

- Add linkdown notifier support and use it in qcom-ep (Manivannan
  Sadhasivam)

- Add Bus Master Enable event support and use it in qcom-ep (Manivannan
  Sadhasivam)

- Add Qualcomm Modem Host Interface (MHI) endpoint driver (Manivannan
  Sadhasivam)

- Add Layerscape PME interrupt handling to manage link-up notification
  (Frank Li)

* pci/controller/endpoint:
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus
  PCI: endpoint: Add PCI Endpoint function driver for MHI bus
  PCI: qcom-ep: Add support for BME notification
  PCI: qcom-ep: Add support for Link down notification
  PCI: endpoint: Add BME notifier support
  PCI: endpoint: Add linkdown notifier support
  PCI: endpoint: Return error if EPC is started/stopped multiple times
  PCI: endpoint: Pass EPF device ID to the probe function
  PCI: endpoint: Add missing documentation about the MSI/MSI-X range
  PCI: endpoint: Improve pci_epf_type_add_cfs()
  PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
  misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq()
  misc: pci_endpoint_test: Do not write status in IRQ handler
  misc: pci_endpoint_test: Re-init completion for every test
  misc: pci_endpoint_test: Free IRQs before removing the device
  PCI: epf-test: Simplify transfers result print
  PCI: epf-test: Simplify DMA support checks
  PCI: epf-test: Cleanup request result handling
  PCI: epf-test: Cleanup pci_epf_test_cmd_handler()
  PCI: epf-test: Improve handling of command and status registers
  PCI: epf-test: Simplify IRQ test commands execution
  PCI: epf-test: Simplify pci_epf_test_raise_irq()
  PCI: epf-test: Simplify read/write/copy test functions
  PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer
  PCI: epf-test: Fix DMA transfer completion detection
  PCI: epf-test: Fix DMA transfer completion initialization
  PCI: endpoint: Move pci_epf_type_add_cfs() code
  PCI: endpoint: Automatically create a function specific attributes group
  PCI: endpoint: Fix a Kconfig prompt of vNTB driver

2 files changed, 101 insertions, 1 deletions

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index c640db60edc6..de4c1758a6c3 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -18,6 +18,20 @@
 
 #include "pcie-designware.h"
 
+#define PEX_PF0_CONFIG			0xC0014
+#define PEX_PF0_CFG_READY		BIT(0)
+
+/* PEX PFa PCIE PME and message interrupt registers*/
+#define PEX_PF0_PME_MES_DR		0xC0020
+#define PEX_PF0_PME_MES_DR_LUD		BIT(7)
+#define PEX_PF0_PME_MES_DR_LDD		BIT(9)
+#define PEX_PF0_PME_MES_DR_HRD		BIT(10)
+
+#define PEX_PF0_PME_MES_IER		0xC0028
+#define PEX_PF0_PME_MES_IER_LUDIE	BIT(7)
+#define PEX_PF0_PME_MES_IER_LDDIE	BIT(9)
+#define PEX_PF0_PME_MES_IER_HRDIE	BIT(10)
+
 #define to_ls_pcie_ep(x)	dev_get_drvdata((x)->dev)
 
 struct ls_pcie_ep_drvdata {
@@ -30,8 +44,84 @@ struct ls_pcie_ep {
 	struct dw_pcie			*pci;
 	struct pci_epc_features		*ls_epc;
 	const struct ls_pcie_ep_drvdata *drvdata;
+	int				irq;
+	bool				big_endian;
 };
 
+static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
+{
+	struct dw_pcie *pci = pcie->pci;
+
+	if (pcie->big_endian)
+		return ioread32be(pci->dbi_base + offset);
+	else
+		return ioread32(pci->dbi_base + offset);
+}
+
+static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
+{
+	struct dw_pcie *pci = pcie->pci;
+
+	if (pcie->big_endian)
+		iowrite32be(value, pci->dbi_base + offset);
+	else
+		iowrite32(value, pci->dbi_base + offset);
+}
+
+static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
+{
+	struct ls_pcie_ep *pcie = dev_id;
+	struct dw_pcie *pci = pcie->pci;
+	u32 val, cfg;
+
+	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
+	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
+
+	if (!val)
+		return IRQ_NONE;
+
+	if (val & PEX_PF0_PME_MES_DR_LUD) {
+		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
+		cfg |= PEX_PF0_CFG_READY;
+		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
+		dw_pcie_ep_linkup(&pci->ep);
+
+		dev_dbg(pci->dev, "Link up\n");
+	} else if (val & PEX_PF0_PME_MES_DR_LDD) {
+		dev_dbg(pci->dev, "Link down\n");
+	} else if (val & PEX_PF0_PME_MES_DR_HRD) {
+		dev_dbg(pci->dev, "Hot reset\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
+				     struct platform_device *pdev)
+{
+	u32 val;
+	int ret;
+
+	pcie->irq = platform_get_irq_byname(pdev, "pme");
+	if (pcie->irq < 0)
+		return pcie->irq;
+
+	ret = devm_request_irq(&pdev->dev, pcie->irq, ls_pcie_ep_event_handler,
+			       IRQF_SHARED, pdev->name, pcie);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't register PCIe IRQ\n");
+		return ret;
+	}
+
+	/* Enable interrupts */
+	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
+	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
+		PEX_PF0_PME_MES_IER_LUDIE;
+	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
+
+	return 0;
+}
+
 static const struct pci_epc_features*
 ls_pcie_ep_get_features(struct dw_pcie_ep *ep)
 {
@@ -125,6 +215,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 	struct ls_pcie_ep *pcie;
 	struct pci_epc_features *ls_epc;
 	struct resource *dbi_base;
+	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
@@ -144,6 +235,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 	pci->ops = pcie->drvdata->dw_pcie_ops;
 
 	ls_epc->bar_fixed_64bit = (1 << BAR_2) | (1 << BAR_4);
+	ls_epc->linkup_notifier = true;
 
 	pcie->pci = pci;
 	pcie->ls_epc = ls_epc;
@@ -155,9 +247,15 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
 
 	pci->ep.ops = &ls_pcie_ep_ops;
 
+	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
+
 	platform_set_drvdata(pdev, pcie);
 
-	return dw_pcie_ep_init(&pci->ep);
+	ret = dw_pcie_ep_init(&pci->ep);
+	if (ret)
+		return ret;
+
+	return ls_pcie_ep_interrupt_init(pcie, pdev);
 }
 
 static struct platform_driver ls_pcie_ep_driver = {
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 19b32839ea26..1435f516d3f7 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -569,9 +569,11 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
 	if (FIELD_GET(PARF_INT_ALL_LINK_DOWN, status)) {
 		dev_dbg(dev, "Received Linkdown event\n");
 		pcie_ep->link_status = QCOM_PCIE_EP_LINK_DOWN;
+		pci_epc_linkdown(pci->ep.epc);
 	} else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
 		dev_dbg(dev, "Received BME event. Link is enabled!\n");
 		pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
+		pci_epc_bme_notify(pci->ep.epc);
 	} else if (FIELD_GET(PARF_INT_ALL_PM_TURNOFF, status)) {
 		dev_dbg(dev, "Received PM Turn-off event! Entering L23\n");
 		val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);