diff options
author | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2022-01-19 21:19:15 +0300 |
---|---|---|
committer | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2022-01-24 17:30:13 +0300 |
commit | e12963c453263d5321a2c610e98cbc731233b685 (patch) | |
tree | 6ffb8b042e312179884681672f538b53079280f9 /drivers/pinctrl/intel/pinctrl-intel.c | |
parent | e986f0e602f19ecb7880b04dd1db415ed9bca3f6 (diff) | |
download | linux-e12963c453263d5321a2c610e98cbc731233b685.tar.xz |
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer
when switching to GPIO") hadn't taken into account an update of the IRQ
flags scenario.
When updating the IRQ flags on the preconfigured line the ->irq_set_type()
is called again. In such case the sequential Rx buffer configuration
changes may trigger a falling or rising edge interrupt that may lead,
on some platforms, to an undesired event.
This may happen because each of intel_gpio_set_gpio_mode() and
__intel_gpio_set_direction() updates the pad configuration with a different
value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is
called only for the pads that are configured as an input. Due to this fact,
integrate the logic of __intel_gpio_set_direction() call into the
intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and
immediately re-enabled.
Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO")
Reported-by: Kane Chen <kane.chen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Diffstat (limited to 'drivers/pinctrl/intel/pinctrl-intel.c')
-rw-r--r-- | drivers/pinctrl/intel/pinctrl-intel.c | 10 |
1 files changed, 2 insertions, 8 deletions
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index e9bb98cb9112..826d494f3cc6 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -451,8 +451,8 @@ static void intel_gpio_set_gpio_mode(void __iomem *padcfg0) value &= ~PADCFG0_PMODE_MASK; value |= PADCFG0_PMODE_GPIO; - /* Disable input and output buffers */ - value |= PADCFG0_GPIORXDIS; + /* Disable TX buffer and enable RX (this will be input) */ + value &= ~PADCFG0_GPIORXDIS; value |= PADCFG0_GPIOTXDIS; /* Disable SCI/SMI/NMI generation */ @@ -497,9 +497,6 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev, intel_gpio_set_gpio_mode(padcfg0); - /* Disable TX buffer and enable RX (this will be input) */ - __intel_gpio_set_direction(padcfg0, true); - raw_spin_unlock_irqrestore(&pctrl->lock, flags); return 0; @@ -1115,9 +1112,6 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned int type) intel_gpio_set_gpio_mode(reg); - /* Disable TX buffer and enable RX (this will be input) */ - __intel_gpio_set_direction(reg, true); - value = readl(reg); value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV); |