summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-adi2.h
diff options
context:
space:
mode:
authorSonic Zhang <sonic.zhang@analog.com>2013-09-03 12:28:59 +0400
committerLinus Walleij <linus.walleij@linaro.org>2013-09-19 16:37:27 +0400
commite9a03add0c6ed5341fc59ff9c76843c2888a33fa (patch)
tree3530e2d42d4bcd01c13cc3024cad2b4d8624ce6a /drivers/pinctrl/pinctrl-adi2.h
parent272b98c6455f00884f0350f775c5342358ebb73f (diff)
downloadlinux-e9a03add0c6ed5341fc59ff9c76843c2888a33fa.tar.xz
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.
The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/pinctrl-adi2.h')
-rw-r--r--drivers/pinctrl/pinctrl-adi2.h75
1 files changed, 75 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-adi2.h b/drivers/pinctrl/pinctrl-adi2.h
new file mode 100644
index 000000000000..1f06f8df1fa3
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-adi2.h
@@ -0,0 +1,75 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+#ifndef PINCTRL_PINCTRL_ADI2_H
+#define PINCTRL_PINCTRL_ADI2_H
+
+#include <linux/pinctrl/pinctrl.h>
+
+ /**
+ * struct adi_pin_group - describes a pin group
+ * @name: the name of this pin group
+ * @pins: an array of pins
+ * @num: the number of pins in this array
+ */
+struct adi_pin_group {
+ const char *name;
+ const unsigned *pins;
+ const unsigned num;
+};
+
+#define ADI_PIN_GROUP(n, p) \
+ { \
+ .name = n, \
+ .pins = p, \
+ .num = ARRAY_SIZE(p), \
+ }
+
+ /**
+ * struct adi_pmx_func - describes function mux setting of pin groups
+ * @name: the name of this function mux setting
+ * @groups: an array of pin groups
+ * @num_groups: the number of pin groups in this array
+ * @mux: the function mux setting array, end by zero
+ */
+struct adi_pmx_func {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+ const unsigned short *mux;
+};
+
+#define ADI_PMX_FUNCTION(n, g, m) \
+ { \
+ .name = n, \
+ .groups = g, \
+ .num_groups = ARRAY_SIZE(g), \
+ .mux = m, \
+ }
+
+/**
+ * struct adi_pinctrl_soc_data - ADI pin controller per-SoC configuration
+ * @functions: The functions supported on this SoC.
+ * @nfunction: The number of entries in @functions.
+ * @groups: An array describing all pin groups the pin SoC supports.
+ * @ngroups: The number of entries in @groups.
+ * @pins: An array describing all pins the pin controller affects.
+ * @npins: The number of entries in @pins.
+ */
+struct adi_pinctrl_soc_data {
+ const struct adi_pmx_func *functions;
+ int nfunctions;
+ const struct adi_pin_group *groups;
+ int ngroups;
+ const struct pinctrl_pin_desc *pins;
+ int npins;
+};
+
+void adi_pinctrl_soc_init(const struct adi_pinctrl_soc_data **soc);
+
+#endif /* PINCTRL_PINCTRL_ADI2_H */