summaryrefslogtreecommitdiff
path: root/drivers/reset
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-12-05 22:43:31 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2019-12-05 22:43:31 +0300
commitec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1 (patch)
tree1d39945dbdd233d35c571a726e135fe0ae845814 /drivers/reset
parent38206c24ab09b4f4c2a57de5c1af0bb2e69cf5b6 (diff)
parent3f6939aec712a15152c32516c1c543a91ac1e717 (diff)
downloadlinux-ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1.tar.xz
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
Diffstat (limited to 'drivers/reset')
-rw-r--r--drivers/reset/Kconfig5
-rw-r--r--drivers/reset/core.c8
-rw-r--r--drivers/reset/hisilicon/reset-hi3660.c2
-rw-r--r--drivers/reset/reset-meson-audio-arb.c43
-rw-r--r--drivers/reset/reset-meson.c35
-rw-r--r--drivers/reset/reset-uniphier-glue.c4
-rw-r--r--drivers/reset/reset-zynqmp.c2
7 files changed, 81 insertions, 18 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7b07281aa0ae..3ad7817ce1f0 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -129,7 +129,7 @@ config RESET_SCMI
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC
+ default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
@@ -138,10 +138,11 @@ config RESET_SIMPLE
Currently this driver supports:
- Altera SoCFPGAs
- ASPEED BMC SoCs
+ - Bitmain BM1880 SoC
+ - Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- ZTE's zx2967 family
- - Bitmain BM1880 SoC
config RESET_STM32MP157
bool "STM32MP157 Reset Driver" if COMPILE_TEST
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 3c9a64c1b7a8..ca1d49146f61 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -77,8 +77,10 @@ static const char *rcdev_name(struct reset_controller_dev *rcdev)
* @rcdev: a pointer to the reset controller device
* @reset_spec: reset line specifier as found in the device tree
*
- * This simple translation function should be used for reset controllers
- * with 1:1 mapping, where reset lines can be indexed by number without gaps.
+ * This static translation function is used by default if of_xlate in
+ * :c:type:`reset_controller_dev` is not set. It is useful for all reset
+ * controllers with 1:1 mapping, where reset lines can be indexed by number
+ * without gaps.
*/
static int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
@@ -333,7 +335,6 @@ EXPORT_SYMBOL_GPL(reset_control_reset);
* internal state to be reset, but must be prepared for this to happen.
* Consumers must not use reset_control_reset on shared reset lines when
* reset_control_(de)assert has been used.
- * return 0.
*
* If rstc is NULL it is an optional reset and the function will just
* return 0.
@@ -392,7 +393,6 @@ EXPORT_SYMBOL_GPL(reset_control_assert);
* After calling this function, the reset is guaranteed to be deasserted.
* Consumers must not use reset_control_reset on shared reset lines when
* reset_control_(de)assert has been used.
- * return 0.
*
* If rstc is NULL it is an optional reset and the function will just
* return 0.
diff --git a/drivers/reset/hisilicon/reset-hi3660.c b/drivers/reset/hisilicon/reset-hi3660.c
index f690b1878071..a7d4445924e5 100644
--- a/drivers/reset/hisilicon/reset-hi3660.c
+++ b/drivers/reset/hisilicon/reset-hi3660.c
@@ -56,7 +56,7 @@ static int hi3660_reset_dev(struct reset_controller_dev *rcdev,
return hi3660_reset_deassert(rcdev, idx);
}
-static struct reset_control_ops hi3660_reset_ops = {
+static const struct reset_control_ops hi3660_reset_ops = {
.reset = hi3660_reset_dev,
.assert = hi3660_reset_assert,
.deassert = hi3660_reset_deassert,
diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c
index c53a2185a039..1dc06e08a8da 100644
--- a/drivers/reset/reset-meson-audio-arb.c
+++ b/drivers/reset/reset-meson-audio-arb.c
@@ -19,6 +19,11 @@ struct meson_audio_arb_data {
spinlock_t lock;
};
+struct meson_audio_arb_match_data {
+ const unsigned int *reset_bits;
+ unsigned int reset_num;
+};
+
#define ARB_GENERAL_BIT 31
static const unsigned int axg_audio_arb_reset_bits[] = {
@@ -30,6 +35,27 @@ static const unsigned int axg_audio_arb_reset_bits[] = {
[AXG_ARB_FRDDR_C] = 6,
};
+static const struct meson_audio_arb_match_data axg_audio_arb_match = {
+ .reset_bits = axg_audio_arb_reset_bits,
+ .reset_num = ARRAY_SIZE(axg_audio_arb_reset_bits),
+};
+
+static const unsigned int sm1_audio_arb_reset_bits[] = {
+ [AXG_ARB_TODDR_A] = 0,
+ [AXG_ARB_TODDR_B] = 1,
+ [AXG_ARB_TODDR_C] = 2,
+ [AXG_ARB_FRDDR_A] = 4,
+ [AXG_ARB_FRDDR_B] = 5,
+ [AXG_ARB_FRDDR_C] = 6,
+ [AXG_ARB_TODDR_D] = 3,
+ [AXG_ARB_FRDDR_D] = 7,
+};
+
+static const struct meson_audio_arb_match_data sm1_audio_arb_match = {
+ .reset_bits = sm1_audio_arb_reset_bits,
+ .reset_num = ARRAY_SIZE(sm1_audio_arb_reset_bits),
+};
+
static int meson_audio_arb_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
@@ -82,7 +108,13 @@ static const struct reset_control_ops meson_audio_arb_rstc_ops = {
};
static const struct of_device_id meson_audio_arb_of_match[] = {
- { .compatible = "amlogic,meson-axg-audio-arb", },
+ {
+ .compatible = "amlogic,meson-axg-audio-arb",
+ .data = &axg_audio_arb_match,
+ }, {
+ .compatible = "amlogic,meson-sm1-audio-arb",
+ .data = &sm1_audio_arb_match,
+ },
{}
};
MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match);
@@ -104,10 +136,15 @@ static int meson_audio_arb_remove(struct platform_device *pdev)
static int meson_audio_arb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ const struct meson_audio_arb_match_data *data;
struct meson_audio_arb_data *arb;
struct resource *res;
int ret;
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL);
if (!arb)
return -ENOMEM;
@@ -126,8 +163,8 @@ static int meson_audio_arb_probe(struct platform_device *pdev)
return PTR_ERR(arb->regs);
spin_lock_init(&arb->lock);
- arb->reset_bits = axg_audio_arb_reset_bits;
- arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
+ arb->reset_bits = data->reset_bits;
+ arb->rstc.nr_resets = data->reset_num;
arb->rstc.ops = &meson_audio_arb_rstc_ops;
arb->rstc.of_node = dev->of_node;
arb->rstc.owner = THIS_MODULE;
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index 7d05d766e1ea..94d7ba88d7d2 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -15,12 +15,16 @@
#include <linux/types.h>
#include <linux/of_device.h>
-#define REG_COUNT 8
#define BITS_PER_REG 32
-#define LEVEL_OFFSET 0x7c
+
+struct meson_reset_param {
+ int reg_count;
+ int level_offset;
+};
struct meson_reset {
void __iomem *reg_base;
+ const struct meson_reset_param *param;
struct reset_controller_dev rcdev;
spinlock_t lock;
};
@@ -46,10 +50,12 @@ static int meson_reset_level(struct reset_controller_dev *rcdev,
container_of(rcdev, struct meson_reset, rcdev);
unsigned int bank = id / BITS_PER_REG;
unsigned int offset = id % BITS_PER_REG;
- void __iomem *reg_addr = data->reg_base + LEVEL_OFFSET + (bank << 2);
+ void __iomem *reg_addr;
unsigned long flags;
u32 reg;
+ reg_addr = data->reg_base + data->param->level_offset + (bank << 2);
+
spin_lock_irqsave(&data->lock, flags);
reg = readl(reg_addr);
@@ -81,10 +87,21 @@ static const struct reset_control_ops meson_reset_ops = {
.deassert = meson_reset_deassert,
};
+static const struct meson_reset_param meson8b_param = {
+ .reg_count = 8,
+ .level_offset = 0x7c,
+};
+
+static const struct meson_reset_param meson_a1_param = {
+ .reg_count = 3,
+ .level_offset = 0x40,
+};
+
static const struct of_device_id meson_reset_dt_ids[] = {
- { .compatible = "amlogic,meson8b-reset" },
- { .compatible = "amlogic,meson-gxbb-reset" },
- { .compatible = "amlogic,meson-axg-reset" },
+ { .compatible = "amlogic,meson8b-reset", .data = &meson8b_param},
+ { .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param},
+ { .compatible = "amlogic,meson-axg-reset", .data = &meson8b_param},
+ { .compatible = "amlogic,meson-a1-reset", .data = &meson_a1_param},
{ /* sentinel */ },
};
@@ -102,12 +119,16 @@ static int meson_reset_probe(struct platform_device *pdev)
if (IS_ERR(data->reg_base))
return PTR_ERR(data->reg_base);
+ data->param = of_device_get_match_data(&pdev->dev);
+ if (!data->param)
+ return -ENODEV;
+
platform_set_drvdata(pdev, data);
spin_lock_init(&data->lock);
data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+ data->rcdev.nr_resets = data->param->reg_count * BITS_PER_REG;
data->rcdev.ops = &meson_reset_ops;
data->rcdev.of_node = pdev->dev.of_node;
diff --git a/drivers/reset/reset-uniphier-glue.c b/drivers/reset/reset-uniphier-glue.c
index a45923f4df6d..2b188b3bb69a 100644
--- a/drivers/reset/reset-uniphier-glue.c
+++ b/drivers/reset/reset-uniphier-glue.c
@@ -141,6 +141,10 @@ static const struct of_device_id uniphier_glue_reset_match[] = {
.data = &uniphier_pro4_data,
},
{
+ .compatible = "socionext,uniphier-pro5-usb3-reset",
+ .data = &uniphier_pro4_data,
+ },
+ {
.compatible = "socionext,uniphier-pxs2-usb3-reset",
.data = &uniphier_pxs2_data,
},
diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index 99e75d92dada..0144075b11a6 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -64,7 +64,7 @@ static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
PM_RESET_ACTION_PULSE);
}
-static struct reset_control_ops zynqmp_reset_ops = {
+static const struct reset_control_ops zynqmp_reset_ops = {
.reset = zynqmp_reset_reset,
.assert = zynqmp_reset_assert,
.deassert = zynqmp_reset_deassert,