summaryrefslogtreecommitdiff
path: root/drivers/scsi/am53c974.c
diff options
context:
space:
mode:
authorHannes Reinecke <hare@suse.de>2014-11-24 17:37:25 +0300
committerChristoph Hellwig <hch@lst.de>2014-11-24 18:13:05 +0300
commit3a7e7be2a9a2105742c3c88d466ea2158a03a837 (patch)
treed7a33f176c139a6378a296d25e79841963592363 /drivers/scsi/am53c974.c
parent3170866f8865809290f4b99e61a096ba39a01472 (diff)
downloadlinux-3a7e7be2a9a2105742c3c88d466ea2158a03a837.tar.xz
am53c974: add new driver
This patch adds a new implementation for the Tekram DC-390T / AMD AM53c974 SCSI controller, based on the generic esp_scsi infrastructure. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers/scsi/am53c974.c')
-rw-r--r--drivers/scsi/am53c974.c537
1 files changed, 537 insertions, 0 deletions
diff --git a/drivers/scsi/am53c974.c b/drivers/scsi/am53c974.c
new file mode 100644
index 000000000000..a16c9cf0f0a2
--- /dev/null
+++ b/drivers/scsi/am53c974.c
@@ -0,0 +1,537 @@
+/*
+ * AMD am53c974 driver.
+ * Copyright (c) 2014 Hannes Reinecke, SUSE Linux GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <scsi/scsi_host.h>
+
+#include "esp_scsi.h"
+
+#define DRV_MODULE_NAME "am53c974"
+#define DRV_MODULE_VERSION "1.00"
+
+static bool am53c974_debug;
+
+#define esp_dma_log(f, a...) \
+ do { \
+ if (am53c974_debug) \
+ shost_printk(KERN_DEBUG, esp->host, f, ##a); \
+ } while (0)
+
+#define ESP_DMA_CMD 0x10
+#define ESP_DMA_STC 0x11
+#define ESP_DMA_SPA 0x12
+#define ESP_DMA_WBC 0x13
+#define ESP_DMA_WAC 0x14
+#define ESP_DMA_STATUS 0x15
+#define ESP_DMA_SMDLA 0x16
+#define ESP_DMA_WMAC 0x17
+
+#define ESP_DMA_CMD_IDLE 0x00
+#define ESP_DMA_CMD_BLAST 0x01
+#define ESP_DMA_CMD_ABORT 0x02
+#define ESP_DMA_CMD_START 0x03
+#define ESP_DMA_CMD_MASK 0x03
+#define ESP_DMA_CMD_DIAG 0x04
+#define ESP_DMA_CMD_MDL 0x10
+#define ESP_DMA_CMD_INTE_P 0x20
+#define ESP_DMA_CMD_INTE_D 0x40
+#define ESP_DMA_CMD_DIR 0x80
+
+#define ESP_DMA_STAT_PWDN 0x01
+#define ESP_DMA_STAT_ERROR 0x02
+#define ESP_DMA_STAT_ABORT 0x04
+#define ESP_DMA_STAT_DONE 0x08
+#define ESP_DMA_STAT_SCSIINT 0x10
+#define ESP_DMA_STAT_BCMPLT 0x20
+
+/* EEPROM is accessed with 16-bit values */
+#define DC390_EEPROM_READ 0x80
+#define DC390_EEPROM_LEN 0x40
+
+/*
+ * DC390 EEPROM
+ *
+ * 8 * 4 bytes of per-device options
+ * followed by HBA specific options
+ */
+
+/* Per-device options */
+#define DC390_EE_MODE1 0x00
+#define DC390_EE_SPEED 0x01
+
+/* HBA-specific options */
+#define DC390_EE_ADAPT_SCSI_ID 0x40
+#define DC390_EE_MODE2 0x41
+#define DC390_EE_DELAY 0x42
+#define DC390_EE_TAG_CMD_NUM 0x43
+
+#define DC390_EE_MODE1_PARITY_CHK 0x01
+#define DC390_EE_MODE1_SYNC_NEGO 0x02
+#define DC390_EE_MODE1_EN_DISC 0x04
+#define DC390_EE_MODE1_SEND_START 0x08
+#define DC390_EE_MODE1_TCQ 0x10
+
+#define DC390_EE_MODE2_MORE_2DRV 0x01
+#define DC390_EE_MODE2_GREATER_1G 0x02
+#define DC390_EE_MODE2_RST_SCSI_BUS 0x04
+#define DC390_EE_MODE2_ACTIVE_NEGATION 0x08
+#define DC390_EE_MODE2_NO_SEEK 0x10
+#define DC390_EE_MODE2_LUN_CHECK 0x20
+
+struct pci_esp_priv {
+ struct esp *esp;
+ u8 dma_status;
+};
+
+static void pci_esp_dma_drain(struct esp *esp);
+
+static inline struct pci_esp_priv *pci_esp_get_priv(struct esp *esp)
+{
+ struct pci_dev *pdev = esp->dev;
+
+ return pci_get_drvdata(pdev);
+}
+
+static void pci_esp_write8(struct esp *esp, u8 val, unsigned long reg)
+{
+ iowrite8(val, esp->regs + (reg * 4UL));
+}
+
+static u8 pci_esp_read8(struct esp *esp, unsigned long reg)
+{
+ return ioread8(esp->regs + (reg * 4UL));
+}
+
+static void pci_esp_write32(struct esp *esp, u32 val, unsigned long reg)
+{
+ return iowrite32(val, esp->regs + (reg * 4UL));
+}
+
+static dma_addr_t pci_esp_map_single(struct esp *esp, void *buf,
+ size_t sz, int dir)
+{
+ return pci_map_single(esp->dev, buf, sz, dir);
+}
+
+static int pci_esp_map_sg(struct esp *esp, struct scatterlist *sg,
+ int num_sg, int dir)
+{
+ return pci_map_sg(esp->dev, sg, num_sg, dir);
+}
+
+static void pci_esp_unmap_single(struct esp *esp, dma_addr_t addr,
+ size_t sz, int dir)
+{
+ pci_unmap_single(esp->dev, addr, sz, dir);
+}
+
+static void pci_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
+ int num_sg, int dir)
+{
+ pci_unmap_sg(esp->dev, sg, num_sg, dir);
+}
+
+static int pci_esp_irq_pending(struct esp *esp)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+
+ pep->dma_status = pci_esp_read8(esp, ESP_DMA_STATUS);
+ esp_dma_log("dma intr dreg[%02x]\n", pep->dma_status);
+
+ if (pep->dma_status & (ESP_DMA_STAT_ERROR |
+ ESP_DMA_STAT_ABORT |
+ ESP_DMA_STAT_DONE |
+ ESP_DMA_STAT_SCSIINT))
+ return 1;
+
+ return 0;
+}
+
+static void pci_esp_reset_dma(struct esp *esp)
+{
+ /* Nothing to do ? */
+}
+
+static void pci_esp_dma_drain(struct esp *esp)
+{
+ u8 resid;
+ int lim = 1000;
+
+
+ if ((esp->sreg & ESP_STAT_PMASK) == ESP_DOP ||
+ (esp->sreg & ESP_STAT_PMASK) == ESP_DIP)
+ /* Data-In or Data-Out, nothing to be done */
+ return;
+
+ while (--lim > 0) {
+ resid = pci_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES;
+ if (resid <= 1)
+ break;
+ cpu_relax();
+ }
+ if (resid > 1) {
+ /* FIFO not cleared */
+ shost_printk(KERN_INFO, esp->host,
+ "FIFO not cleared, %d bytes left\n",
+ resid);
+ }
+
+ /*
+ * When there is a residual BCMPLT will never be set
+ * (obviously). But we still have to issue the BLAST
+ * command, otherwise the data will not being transferred.
+ * But we'll never know when the BLAST operation is
+ * finished. So check for some time and give up eventually.
+ */
+ lim = 1000;
+ pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_BLAST, ESP_DMA_CMD);
+ while (pci_esp_read8(esp, ESP_DMA_STATUS) & ESP_DMA_STAT_BCMPLT) {
+ if (--lim == 0)
+ break;
+ cpu_relax();
+ }
+ pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
+ esp_dma_log("DMA blast done (%d tries, %d bytes left)\n", lim, resid);
+}
+
+static void pci_esp_dma_invalidate(struct esp *esp)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+
+ esp_dma_log("invalidate DMA\n");
+
+ pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
+ pep->dma_status = 0;
+}
+
+static int pci_esp_dma_error(struct esp *esp)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+
+ if (pep->dma_status & ESP_DMA_STAT_ERROR) {
+ u8 dma_cmd = pci_esp_read8(esp, ESP_DMA_CMD);
+
+ if ((dma_cmd & ESP_DMA_CMD_MASK) == ESP_DMA_CMD_START)
+ pci_esp_write8(esp, ESP_DMA_CMD_ABORT, ESP_DMA_CMD);
+
+ return 1;
+ }
+ if (pep->dma_status & ESP_DMA_STAT_ABORT) {
+ pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
+ pep->dma_status = pci_esp_read8(esp, ESP_DMA_CMD);
+ return 1;
+ }
+ return 0;
+}
+
+static void pci_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
+ u32 dma_count, int write, u8 cmd)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+ u32 val = 0;
+
+ BUG_ON(!(cmd & ESP_CMD_DMA));
+
+ pep->dma_status = 0;
+
+ /* Set DMA engine to IDLE */
+ if (write)
+ /* DMA write direction logic is inverted */
+ val |= ESP_DMA_CMD_DIR;
+ pci_esp_write8(esp, ESP_DMA_CMD_IDLE | val, ESP_DMA_CMD);
+
+ pci_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
+ pci_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
+
+ pci_esp_write32(esp, esp_count, ESP_DMA_STC);
+ pci_esp_write32(esp, addr, ESP_DMA_SPA);
+
+ esp_dma_log("start dma addr[%x] count[%d:%d]\n",
+ addr, esp_count, dma_count);
+
+ scsi_esp_cmd(esp, cmd);
+ /* Send DMA Start command */
+ pci_esp_write8(esp, ESP_DMA_CMD_START | val, ESP_DMA_CMD);
+}
+
+static const struct esp_driver_ops pci_esp_ops = {
+ .esp_write8 = pci_esp_write8,
+ .esp_read8 = pci_esp_read8,
+ .map_single = pci_esp_map_single,
+ .map_sg = pci_esp_map_sg,
+ .unmap_single = pci_esp_unmap_single,
+ .unmap_sg = pci_esp_unmap_sg,
+ .irq_pending = pci_esp_irq_pending,
+ .reset_dma = pci_esp_reset_dma,
+ .dma_drain = pci_esp_dma_drain,
+ .dma_invalidate = pci_esp_dma_invalidate,
+ .send_dma_cmd = pci_esp_send_dma_cmd,
+ .dma_error = pci_esp_dma_error,
+};
+
+/*
+ * Read DC-390 eeprom
+ */
+static void dc390_eeprom_prepare_read(struct pci_dev *pdev, u8 cmd)
+{
+ u8 carry_flag = 1, j = 0x80, bval;
+ int i;
+
+ for (i = 0; i < 9; i++) {
+ if (carry_flag) {
+ pci_write_config_byte(pdev, 0x80, 0x40);
+ bval = 0xc0;
+ } else
+ bval = 0x80;
+
+ udelay(160);
+ pci_write_config_byte(pdev, 0x80, bval);
+ udelay(160);
+ pci_write_config_byte(pdev, 0x80, 0);
+ udelay(160);
+
+ carry_flag = (cmd & j) ? 1 : 0;
+ j >>= 1;
+ }
+}
+
+static u16 dc390_eeprom_get_data(struct pci_dev *pdev)
+{
+ int i;
+ u16 wval = 0;
+ u8 bval;
+
+ for (i = 0; i < 16; i++) {
+ wval <<= 1;
+
+ pci_write_config_byte(pdev, 0x80, 0x80);
+ udelay(160);
+ pci_write_config_byte(pdev, 0x80, 0x40);
+ udelay(160);
+ pci_read_config_byte(pdev, 0x00, &bval);
+
+ if (bval == 0x22)
+ wval |= 1;
+ }
+
+ return wval;
+}
+
+static void dc390_read_eeprom(struct pci_dev *pdev, u16 *ptr)
+{
+ u8 cmd = DC390_EEPROM_READ, i;
+
+ for (i = 0; i < DC390_EEPROM_LEN; i++) {
+ pci_write_config_byte(pdev, 0xc0, 0);
+ udelay(160);
+
+ dc390_eeprom_prepare_read(pdev, cmd++);
+ *ptr++ = dc390_eeprom_get_data(pdev);
+
+ pci_write_config_byte(pdev, 0x80, 0);
+ pci_write_config_byte(pdev, 0x80, 0);
+ udelay(160);
+ }
+}
+
+static void dc390_check_eeprom(struct esp *esp)
+{
+ u8 EEbuf[128];
+ u16 *ptr = (u16 *)EEbuf, wval = 0;
+ int i;
+
+ dc390_read_eeprom((struct pci_dev *)esp->dev, ptr);
+
+ for (i = 0; i < DC390_EEPROM_LEN; i++, ptr++)
+ wval += *ptr;
+
+ /* no Tekram EEprom found */
+ if (wval != 0x1234) {
+ struct pci_dev *pdev = esp->dev;
+ dev_printk(KERN_INFO, &pdev->dev,
+ "No valid Tekram EEprom found\n");
+ return;
+ }
+ esp->scsi_id = EEbuf[DC390_EE_ADAPT_SCSI_ID];
+ esp->num_tags = 2 << EEbuf[DC390_EE_TAG_CMD_NUM];
+}
+
+static int pci_esp_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct scsi_host_template *hostt = &scsi_esp_template;
+ int err = -ENODEV;
+ struct Scsi_Host *shost;
+ struct esp *esp;
+ struct pci_esp_priv *pep;
+
+ if (pci_enable_device(pdev)) {
+ dev_printk(KERN_INFO, &pdev->dev, "cannot enable device\n");
+ return -ENODEV;
+ }
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "failed to set 32bit DMA mask\n");
+ goto fail_disable_device;
+ }
+
+ shost = scsi_host_alloc(hostt, sizeof(struct esp));
+ if (!shost) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "failed to allocate scsi host\n");
+ err = -ENOMEM;
+ goto fail_disable_device;
+ }
+
+ pep = kzalloc(sizeof(struct pci_esp_priv), GFP_KERNEL);
+ if (!pep) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "failed to allocate esp_priv\n");
+ err = -ENOMEM;
+ goto fail_host_alloc;
+ }
+
+ esp = shost_priv(shost);
+ esp->host = shost;
+ esp->dev = pdev;
+ esp->ops = &pci_esp_ops;
+ /*
+ * The am53c974 HBA has a design flaw of generating
+ * spurious DMA completion interrupts when using
+ * DMA for command submission.
+ */
+ esp->flags |= ESP_FLAG_USE_FIFO;
+ pep->esp = esp;
+
+ if (pci_request_regions(pdev, DRV_MODULE_NAME)) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "pci memory selection failed\n");
+ goto fail_priv_alloc;
+ }
+
+ esp->regs = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!esp->regs) {
+ dev_printk(KERN_ERR, &pdev->dev, "pci I/O map failed\n");
+ err = -EINVAL;
+ goto fail_release_regions;
+ }
+ esp->dma_regs = esp->regs;
+
+ pci_set_master(pdev);
+
+ esp->command_block = pci_alloc_consistent(pdev, 16,
+ &esp->command_block_dma);
+ if (!esp->command_block) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to allocate command block\n");
+ err = -ENOMEM;
+ goto fail_unmap_regs;
+ }
+
+ err = request_irq(pdev->irq, scsi_esp_intr, IRQF_SHARED,
+ DRV_MODULE_NAME, esp);
+ if (err < 0) {
+ dev_printk(KERN_ERR, &pdev->dev, "failed to register IRQ\n");
+ goto fail_unmap_command_block;
+ }
+
+ esp->scsi_id = 7;
+ dc390_check_eeprom(esp);
+
+ shost->this_id = esp->scsi_id;
+ shost->max_id = 8;
+ shost->irq = pdev->irq;
+ shost->io_port = pci_resource_start(pdev, 0);
+ shost->n_io_port = pci_resource_len(pdev, 0);
+ shost->unique_id = shost->io_port;
+ esp->scsi_id_mask = (1 << esp->scsi_id);
+ /* Assume 40MHz clock */
+ esp->cfreq = 40000000;
+
+ pci_set_drvdata(pdev, pep);
+
+ err = scsi_esp_register(esp, &pdev->dev);
+ if (err)
+ goto fail_free_irq;
+
+ return 0;
+
+fail_free_irq:
+ free_irq(pdev->irq, esp);
+fail_unmap_command_block:
+ pci_free_consistent(pdev, 16, esp->command_block,
+ esp->command_block_dma);
+fail_unmap_regs:
+ pci_iounmap(pdev, esp->regs);
+fail_release_regions:
+ pci_release_regions(pdev);
+fail_priv_alloc:
+ kfree(pep);
+fail_host_alloc:
+ scsi_host_put(shost);
+fail_disable_device:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void pci_esp_remove_one(struct pci_dev *pdev)
+{
+ struct pci_esp_priv *pep = pci_get_drvdata(pdev);
+ struct esp *esp = pep->esp;
+
+ scsi_esp_unregister(esp);
+ free_irq(pdev->irq, esp);
+ pci_free_consistent(pdev, 16, esp->command_block,
+ esp->command_block_dma);
+ pci_iounmap(pdev, esp->regs);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ kfree(pep);
+
+ scsi_host_put(esp->host);
+}
+
+static struct pci_device_id am53c974_pci_tbl[] = {
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SCSI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, am53c974_pci_tbl);
+
+static struct pci_driver am53c974_driver = {
+ .name = DRV_MODULE_NAME,
+ .id_table = am53c974_pci_tbl,
+ .probe = pci_esp_probe_one,
+ .remove = pci_esp_remove_one,
+};
+
+static int __init am53c974_module_init(void)
+{
+ return pci_register_driver(&am53c974_driver);
+}
+
+static void __exit am53c974_module_exit(void)
+{
+ pci_unregister_driver(&am53c974_driver);
+}
+
+MODULE_DESCRIPTION("AM53C974 SCSI driver");
+MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+module_param(am53c974_debug, bool, 0644);
+MODULE_PARM_DESC(am53c974_debug, "Enable debugging");
+
+module_init(am53c974_module_init);
+module_exit(am53c974_module_exit);