summaryrefslogtreecommitdiff
path: root/drivers/scsi/dmx3191d.c
diff options
context:
space:
mode:
authorFinn Thain <fthain@telegraphics.com.au>2014-11-12 08:12:03 +0300
committerChristoph Hellwig <hch@lst.de>2014-11-20 11:11:11 +0300
commitfd9cd67c3d89f9ee350ea6fda802375bf1d66b0b (patch)
tree54a1ddbb23d4a6b6e31368b53ac1c753c73a9539 /drivers/scsi/dmx3191d.c
parent710ddd0d50d22b40e3b644ea35966489ad178978 (diff)
downloadlinux-fd9cd67c3d89f9ee350ea6fda802375bf1d66b0b.tar.xz
dmx3191d: Use NO_IRQ
Testing shows that the Domex 3191D card never asserts its IRQ. Hence it is non-functional with Linux (worse, the EH bugs in the core driver are fatal but that's a problem for another patch). Perhaps the DT-536 chip needs special setup? I can't find documentation for it. The NetBSD driver uses polling apparently because of this issue. Set host->irq = NO_IRQ so the core driver will prevent targets from disconnecting. Don't request host->irq. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers/scsi/dmx3191d.c')
-rw-r--r--drivers/scsi/dmx3191d.c25
1 files changed, 8 insertions, 17 deletions
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index 159434a5cfdb..3e088125a8be 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -34,6 +34,8 @@
* Definitions for the generic 5380 driver.
*/
+#define DONT_USE_INTR
+
#define NCR5380_read(reg) inb(port + reg)
#define NCR5380_write(reg, value) outb(value, port + reg)
@@ -89,32 +91,23 @@ static int dmx3191d_probe_one(struct pci_dev *pdev,
if (!shost)
goto out_release_region;
shost->io_port = io;
- shost->irq = pdev->irq;
- NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ /* This card does not seem to raise an interrupt on pdev->irq.
+ * Steam-powered SCSI controllers run without an IRQ anyway.
+ */
+ shost->irq = NO_IRQ;
- if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
- DMX3191D_DRIVER_NAME, shost)) {
- /*
- * Steam powered scsi controllers run without an IRQ anyway
- */
- printk(KERN_WARNING "dmx3191: IRQ %d not available - "
- "switching to polled mode.\n", pdev->irq);
- shost->irq = NO_IRQ;
- }
+ NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
if (error)
- goto out_free_irq;
+ goto out_release_region;
scsi_scan_host(shost);
return 0;
- out_free_irq:
- if (shost->irq != NO_IRQ)
- free_irq(shost->irq, shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
@@ -131,8 +124,6 @@ static void dmx3191d_remove_one(struct pci_dev *pdev)
NCR5380_exit(shost);
- if (shost->irq != NO_IRQ)
- free_irq(shost->irq, shost);
release_region(shost->io_port, DMX3191D_REGION_LEN);
pci_disable_device(pdev);