summaryrefslogtreecommitdiff
path: root/drivers/scsi/hpsa.c
diff options
context:
space:
mode:
authorDon Brace <don.brace@microsemi.com>2017-10-21 00:51:45 +0300
committerMartin K. Petersen <martin.petersen@oracle.com>2017-10-25 11:55:19 +0300
commitb2582a65755b342dcc26b1c9398b6a1e6bdfc9a2 (patch)
tree4ee33d89f789abebf9b64b7dad3d11eb04870f36 /drivers/scsi/hpsa.c
parent3026ff9b0339a64d6bdef8858636174d453dce54 (diff)
downloadlinux-b2582a65755b342dcc26b1c9398b6a1e6bdfc9a2.tar.xz
scsi: hpsa: correct smart path enabled
Correct re-enabling ioaccel after: 1) RAID transformations and 2) multi-path fail-overs. Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/hpsa.c')
-rw-r--r--drivers/scsi/hpsa.c189
1 files changed, 151 insertions, 38 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4ab53df58f21..6a998b09cb1b 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -787,7 +787,12 @@ static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
}
offload_enabled = hdev->offload_enabled;
spin_unlock_irqrestore(&h->lock, flags);
- return snprintf(buf, 20, "%d\n", offload_enabled);
+
+ if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC)
+ return snprintf(buf, 20, "%d\n", offload_enabled);
+ else
+ return snprintf(buf, 40, "%s\n",
+ "Not applicable for a controller");
}
#define MAX_PATHS 8
@@ -1270,7 +1275,7 @@ static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
dev->model,
label,
dev->offload_config ? '+' : '-',
- dev->offload_enabled ? '+' : '-',
+ dev->offload_to_be_enabled ? '+' : '-',
dev->expose_device);
}
@@ -1345,36 +1350,42 @@ lun_assigned:
(*nadded)++;
hpsa_show_dev_msg(KERN_INFO, h, device,
device->expose_device ? "added" : "masked");
- device->offload_to_be_enabled = device->offload_enabled;
- device->offload_enabled = 0;
return 0;
}
-/* Update an entry in h->dev[] array. */
+/*
+ * Called during a scan operation.
+ *
+ * Update an entry in h->dev[] array.
+ */
static void hpsa_scsi_update_entry(struct ctlr_info *h,
int entry, struct hpsa_scsi_dev_t *new_entry)
{
- int offload_enabled;
/* assumes h->devlock is held */
BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
/* Raid level changed. */
h->dev[entry]->raid_level = new_entry->raid_level;
+ /*
+ * ioacccel_handle may have changed for a dual domain disk
+ */
+ h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+
/* Raid offload parameters changed. Careful about the ordering. */
- if (new_entry->offload_config && new_entry->offload_enabled) {
+ if (new_entry->offload_config && new_entry->offload_to_be_enabled) {
/*
* if drive is newly offload_enabled, we want to copy the
* raid map data first. If previously offload_enabled and
* offload_config were set, raid map data had better be
- * the same as it was before. if raid map data is changed
+ * the same as it was before. If raid map data has changed
* then it had better be the case that
* h->dev[entry]->offload_enabled is currently 0.
*/
h->dev[entry]->raid_map = new_entry->raid_map;
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
}
- if (new_entry->hba_ioaccel_enabled) {
+ if (new_entry->offload_to_be_enabled) {
h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
}
@@ -1385,17 +1396,18 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h,
/*
* We can turn off ioaccel offload now, but need to delay turning
- * it on until we can update h->dev[entry]->phys_disk[], but we
+ * ioaccel on until we can update h->dev[entry]->phys_disk[], but we
* can't do that until all the devices are updated.
*/
- h->dev[entry]->offload_to_be_enabled = new_entry->offload_enabled;
- if (!new_entry->offload_enabled)
+ h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled;
+
+ /*
+ * turn ioaccel off immediately if told to do so.
+ */
+ if (!new_entry->offload_to_be_enabled)
h->dev[entry]->offload_enabled = 0;
- offload_enabled = h->dev[entry]->offload_enabled;
- h->dev[entry]->offload_enabled = h->dev[entry]->offload_to_be_enabled;
hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated");
- h->dev[entry]->offload_enabled = offload_enabled;
}
/* Replace an entry from h->dev[] array. */
@@ -1421,9 +1433,8 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h,
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
+
hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced");
- new_entry->offload_to_be_enabled = new_entry->offload_enabled;
- new_entry->offload_enabled = 0;
}
/* Remove an entry from h->dev[] array. */
@@ -1513,11 +1524,22 @@ static inline int device_updated(struct hpsa_scsi_dev_t *dev1,
return 1;
if (dev1->offload_config != dev2->offload_config)
return 1;
- if (dev1->offload_enabled != dev2->offload_enabled)
+ if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled)
return 1;
if (!is_logical_dev_addr_mode(dev1->scsi3addr))
if (dev1->queue_depth != dev2->queue_depth)
return 1;
+ /*
+ * This can happen for dual domain devices. An active
+ * path change causes the ioaccel handle to change
+ *
+ * for example note the handle differences between p0 and p1
+ * Device WWN ,WWN hash,Handle
+ * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003
+ * p1 0x5000C5005FC4DAC9,0x6798C0,0x00040004
+ */
+ if (dev1->ioaccel_handle != dev2->ioaccel_handle)
+ return 1;
return 0;
}
@@ -1727,6 +1749,11 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
* be 0, but we'll turn it off here just in case
*/
if (!logical_drive->phys_disk[i]) {
+ dev_warn(&h->pdev->dev,
+ "%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n",
+ __func__,
+ h->scsi_host->host_no, logical_drive->bus,
+ logical_drive->target, logical_drive->lun);
logical_drive->offload_enabled = 0;
logical_drive->offload_to_be_enabled = 0;
logical_drive->queue_depth = 8;
@@ -1759,13 +1786,24 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
/*
* If offload is currently enabled, the RAID map and
* phys_disk[] assignment *better* not be changing
- * and since it isn't changing, we do not need to
- * update it.
+ * because we would be changing ioaccel phsy_disk[] pointers
+ * on a ioaccel volume processing I/O requests.
+ *
+ * If an ioaccel volume status changed, initially because it was
+ * re-configured and thus underwent a transformation, or
+ * a drive failed, we would have received a state change
+ * request and ioaccel should have been turned off. When the
+ * transformation completes, we get another state change
+ * request to turn ioaccel back on. In this case, we need
+ * to update the ioaccel information.
+ *
+ * Thus: If it is not currently enabled, but will be after
+ * the scan completes, make sure the ioaccel pointers
+ * are up to date.
*/
- if (dev[i]->offload_enabled)
- continue;
- hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
+ if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled)
+ hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
}
}
@@ -1965,8 +2003,13 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h,
}
hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);
- /* Now that h->dev[]->phys_disk[] is coherent, we can enable
+ /*
+ * Now that h->dev[]->phys_disk[] is coherent, we can enable
* any logical drives that need it enabled.
+ *
+ * The raid map should be current by now.
+ *
+ * We are updating the device list used for I/O requests.
*/
for (i = 0; i < h->ndevices; i++) {
if (h->dev[i] == NULL)
@@ -2441,7 +2484,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
/*
* Any RAID offload error results in retry which will use
- * the normal I/O path so the controller can handle whatever's
+ * the normal I/O path so the controller can handle whatever is
* wrong.
*/
if (is_logical_device(dev) &&
@@ -3540,6 +3583,13 @@ exit_supported:
return true;
}
+/*
+ * Called during a scan operation.
+ * Sets ioaccel status on the new device list, not the existing device list
+ *
+ * The device list used during I/O will be updated later in
+ * adjust_hpsa_scsi_table.
+ */
static void hpsa_get_ioaccel_status(struct ctlr_info *h,
unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
{
@@ -3568,12 +3618,12 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
this_device->offload_config =
!!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
if (this_device->offload_config) {
- this_device->offload_enabled =
+ this_device->offload_to_be_enabled =
!!(ioaccel_status & OFFLOAD_ENABLED_BIT);
if (hpsa_get_raid_map(h, scsi3addr, this_device))
- this_device->offload_enabled = 0;
+ this_device->offload_to_be_enabled = 0;
}
- this_device->offload_to_be_enabled = this_device->offload_enabled;
+
out:
kfree(buf);
return;
@@ -4307,7 +4357,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
continue;
}
- /* Get device type, vendor, model, device id */
+ /* Get device type, vendor, model, device id, raid_map */
rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
&is_OBDR);
if (rc == -ENOMEM) {
@@ -8067,9 +8117,79 @@ static int detect_controller_lockup(struct ctlr_info *h)
return false;
}
-static void hpsa_ack_ctlr_events(struct ctlr_info *h)
+/*
+ * Set ioaccel status for all ioaccel volumes.
+ *
+ * Called from monitor controller worker (hpsa_event_monitor_worker)
+ *
+ * A Volume (or Volumes that comprise an Array set may be undergoing a
+ * transformation, so we will be turning off ioaccel for all volumes that
+ * make up the Array.
+ */
+static void hpsa_set_ioaccel_status(struct ctlr_info *h)
{
+ int rc;
int i;
+ u8 ioaccel_status;
+ unsigned char *buf;
+ struct hpsa_scsi_dev_t *device;
+
+ if (!h)
+ return;
+
+ buf = kmalloc(64, GFP_KERNEL);
+ if (!buf)
+ return;
+
+ /*
+ * Run through current device list used during I/O requests.
+ */
+ for (i = 0; i < h->ndevices; i++) {
+ device = h->dev[i];
+
+ if (!device)
+ continue;
+ if (!device->scsi3addr)
+ continue;
+ if (!hpsa_vpd_page_supported(h, device->scsi3addr,
+ HPSA_VPD_LV_IOACCEL_STATUS))
+ continue;
+
+ memset(buf, 0, 64);
+
+ rc = hpsa_scsi_do_inquiry(h, device->scsi3addr,
+ VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS,
+ buf, 64);
+ if (rc != 0)
+ continue;
+
+ ioaccel_status = buf[IOACCEL_STATUS_BYTE];
+ device->offload_config =
+ !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
+ if (device->offload_config)
+ device->offload_to_be_enabled =
+ !!(ioaccel_status & OFFLOAD_ENABLED_BIT);
+
+ /*
+ * Immediately turn off ioaccel for any volume the
+ * controller tells us to. Some of the reasons could be:
+ * transformation - change to the LVs of an Array.
+ * degraded volume - component failure
+ *
+ * If ioaccel is to be re-enabled, re-enable later during the
+ * scan operation so the driver can get a fresh raidmap
+ * before turning ioaccel back on.
+ *
+ */
+ if (!device->offload_to_be_enabled)
+ device->offload_enabled = 0;
+ }
+
+ kfree(buf);
+}
+
+static void hpsa_ack_ctlr_events(struct ctlr_info *h)
+{
char *event_type;
if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
@@ -8087,10 +8207,7 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
event_type = "configuration change";
/* Stop sending new RAID offload reqs via the IO accelerator */
scsi_block_requests(h->scsi_host);
- for (i = 0; i < h->ndevices; i++) {
- h->dev[i]->offload_enabled = 0;
- h->dev[i]->offload_to_be_enabled = 0;
- }
+ hpsa_set_ioaccel_status(h);
hpsa_drain_accel_commands(h);
/* Set 'accelerator path config change' bit */
dev_warn(&h->pdev->dev,
@@ -8107,10 +8224,6 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
writel(h->events, &(h->cfgtable->clear_event_notify));
writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
hpsa_wait_for_clear_event_notify_ack(h);
-#if 0
- writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
- hpsa_wait_for_mode_change_ack(h);
-#endif
}
return;
}