summaryrefslogtreecommitdiff
path: root/drivers/scsi/hpsa.c
diff options
context:
space:
mode:
authorDon Brace <don.brace@microsemi.com>2019-05-07 21:32:33 +0300
committerMartin K. Petersen <martin.petersen@oracle.com>2019-06-19 02:46:18 +0300
commitc5dfd106414f3e038fee5c6f0800fd55ed07b41d (patch)
tree57778cd59a7efe4537d656c7fe0f197ae3386e98 /drivers/scsi/hpsa.c
parent9e33f0d5788fe4aaa42b1abf6536d046c724a8cd (diff)
downloadlinux-c5dfd106414f3e038fee5c6f0800fd55ed07b41d.tar.xz
scsi: hpsa: correct device resets
Correct a race condition that occurs between the reset handler and the completion handler. There are times when the wait_event condition is never met due to this race condition and the reset never completes. The reset_pending field is NULL initially. t Reset Handler Thread Completion Thread -- -------------------- ----------------- t1 if (c->reset_pending) t2 c->reset_pending = dev; if (atomic_dev_and_test(counter)) t3 atomic_inc(counter) wait_up_all(event_sync_wait_queue) t4 t5 wait_event(...counter == 0) Kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=1994350 Bug 199435 - HPSA + P420i resetting logical Direct-Access never complete Reviewed-by: Justin Lindley <justin.lindley@microsemi.com> Reviewed-by: David Carroll <david.carroll@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/hpsa.c')
-rw-r--r--drivers/scsi/hpsa.c173
1 files changed, 85 insertions, 88 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 42d51951b61a..b4df2475ce9c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -346,11 +346,6 @@ static inline bool hpsa_is_cmd_idle(struct CommandList *c)
return c->scsi_cmd == SCSI_CMD_IDLE;
}
-static inline bool hpsa_is_pending_event(struct CommandList *c)
-{
- return c->reset_pending;
-}
-
/* extract sense key, asc, and ascq from sense data. -1 means invalid. */
static void decode_sense_data(const u8 *sense_data, int sense_data_len,
u8 *sense_key, u8 *asc, u8 *ascq)
@@ -1146,6 +1141,8 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
{
dial_down_lockup_detection_during_fw_flash(h, c);
atomic_inc(&h->commands_outstanding);
+ if (c->device)
+ atomic_inc(&c->device->commands_outstanding);
reply_queue = h->reply_map[raw_smp_processor_id()];
switch (c->cmd_type) {
@@ -1169,9 +1166,6 @@ static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c)
{
- if (unlikely(hpsa_is_pending_event(c)))
- return finish_cmd(c);
-
__enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE);
}
@@ -2434,13 +2428,16 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
break;
}
+ if (dev->in_reset)
+ retry = 0;
+
return retry; /* retry on raid path? */
}
static void hpsa_cmd_resolve_events(struct ctlr_info *h,
struct CommandList *c)
{
- bool do_wake = false;
+ struct hpsa_scsi_dev_t *dev = c->device;
/*
* Reset c->scsi_cmd here so that the reset handler will know
@@ -2449,25 +2446,12 @@ static void hpsa_cmd_resolve_events(struct ctlr_info *h,
*/
c->scsi_cmd = SCSI_CMD_IDLE;
mb(); /* Declare command idle before checking for pending events. */
- if (c->reset_pending) {
- unsigned long flags;
- struct hpsa_scsi_dev_t *dev;
-
- /*
- * There appears to be a reset pending; lock the lock and
- * reconfirm. If so, then decrement the count of outstanding
- * commands and wake the reset command if this is the last one.
- */
- spin_lock_irqsave(&h->lock, flags);
- dev = c->reset_pending; /* Re-fetch under the lock. */
- if (dev && atomic_dec_and_test(&dev->reset_cmds_out))
- do_wake = true;
- c->reset_pending = NULL;
- spin_unlock_irqrestore(&h->lock, flags);
+ if (dev) {
+ atomic_dec(&dev->commands_outstanding);
+ if (dev->in_reset &&
+ atomic_read(&dev->commands_outstanding) <= 0)
+ wake_up_all(&h->event_sync_wait_queue);
}
-
- if (do_wake)
- wake_up_all(&h->event_sync_wait_queue);
}
static void hpsa_cmd_resolve_and_free(struct ctlr_info *h,
@@ -2516,6 +2500,11 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
dev->offload_to_be_enabled = 0;
}
+ if (dev->in_reset) {
+ cmd->result = DID_RESET << 16;
+ return hpsa_cmd_free_and_done(h, c, cmd);
+ }
+
return hpsa_retry_cmd(h, c);
}
@@ -2621,10 +2610,6 @@ static void complete_scsi_command(struct CommandList *cp)
return hpsa_cmd_free_and_done(h, cp, cmd);
}
- if ((unlikely(hpsa_is_pending_event(cp))))
- if (cp->reset_pending)
- return hpsa_cmd_free_and_done(h, cp, cmd);
-
if (cp->cmd_type == CMD_IOACCEL2)
return process_ioaccel2_completion(h, cp, cmd, dev);
@@ -3074,7 +3059,7 @@ out:
return rc;
}
-static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
+static int hpsa_send_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
u8 reset_type, int reply_queue)
{
int rc = IO_OK;
@@ -3082,11 +3067,10 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
struct ErrorInfo *ei;
c = cmd_alloc(h);
-
+ c->device = dev;
/* fill_cmd can't fail here, no data buffer to map. */
- (void) fill_cmd(c, reset_type, h, NULL, 0, 0,
- scsi3addr, TYPE_MSG);
+ (void) fill_cmd(c, reset_type, h, NULL, 0, 0, dev->scsi3addr, TYPE_MSG);
rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
if (rc) {
dev_warn(&h->pdev->dev, "Failed to send reset command\n");
@@ -3164,9 +3148,8 @@ static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
}
static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
- unsigned char *scsi3addr, u8 reset_type, int reply_queue)
+ u8 reset_type, int reply_queue)
{
- int i;
int rc = 0;
/* We can really only handle one reset at a time */
@@ -3175,38 +3158,14 @@ static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
return -EINTR;
}
- BUG_ON(atomic_read(&dev->reset_cmds_out) != 0);
-
- for (i = 0; i < h->nr_cmds; i++) {
- struct CommandList *c = h->cmd_pool + i;
- int refcount = atomic_inc_return(&c->refcount);
-
- if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev, scsi3addr)) {
- unsigned long flags;
-
- /*
- * Mark the target command as having a reset pending,
- * then lock a lock so that the command cannot complete
- * while we're considering it. If the command is not
- * idle then count it; otherwise revoke the event.
- */
- c->reset_pending = dev;
- spin_lock_irqsave(&h->lock, flags); /* Implied MB */
- if (!hpsa_is_cmd_idle(c))
- atomic_inc(&dev->reset_cmds_out);
- else
- c->reset_pending = NULL;
- spin_unlock_irqrestore(&h->lock, flags);
- }
-
- cmd_free(h, c);
- }
-
- rc = hpsa_send_reset(h, scsi3addr, reset_type, reply_queue);
- if (!rc)
+ rc = hpsa_send_reset(h, dev, reset_type, reply_queue);
+ if (!rc) {
+ /* incremented by sending the reset request */
+ atomic_dec(&dev->commands_outstanding);
wait_event(h->event_sync_wait_queue,
- atomic_read(&dev->reset_cmds_out) == 0 ||
+ atomic_read(&dev->commands_outstanding) <= 0 ||
lockup_detected(h));
+ }
if (unlikely(lockup_detected(h))) {
dev_warn(&h->pdev->dev,
@@ -3214,10 +3173,8 @@ static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
rc = -ENODEV;
}
- if (unlikely(rc))
- atomic_set(&dev->reset_cmds_out, 0);
- else
- rc = wait_for_device_to_become_ready(h, scsi3addr, 0);
+ if (!rc)
+ rc = wait_for_device_to_become_ready(h, dev->scsi3addr, 0);
mutex_unlock(&h->reset_mutex);
return rc;
@@ -4846,6 +4803,9 @@ static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h,
c->phys_disk = dev;
+ if (dev->in_reset)
+ return -1;
+
return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle,
cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev);
}
@@ -5031,6 +4991,11 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
} else
cp->sg_count = (u8) use_sg;
+ if (phys_disk->in_reset) {
+ cmd->result = DID_RESET << 16;
+ return -1;
+ }
+
enqueue_cmd_and_start_io(h, c);
return 0;
}
@@ -5048,6 +5013,9 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
if (!c->scsi_cmd->device->hostdata)
return -1;
+ if (phys_disk->in_reset)
+ return -1;
+
/* Try to honor the device's queue depth */
if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) >
phys_disk->queue_depth) {
@@ -5131,6 +5099,9 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
if (!dev)
return -1;
+ if (dev->in_reset)
+ return -1;
+
/* check for valid opcode, get LBA and block count */
switch (cmd->cmnd[0]) {
case WRITE_6:
@@ -5435,13 +5406,13 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
*/
static int hpsa_ciss_submit(struct ctlr_info *h,
struct CommandList *c, struct scsi_cmnd *cmd,
- unsigned char scsi3addr[])
+ struct hpsa_scsi_dev_t *dev)
{
cmd->host_scribble = (unsigned char *) c;
c->cmd_type = CMD_SCSI;
c->scsi_cmd = cmd;
c->Header.ReplyQueue = 0; /* unused in simple mode */
- memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
+ memcpy(&c->Header.LUN.LunAddrBytes[0], &dev->scsi3addr[0], 8);
c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT));
/* Fill in the request block... */
@@ -5492,6 +5463,12 @@ static int hpsa_ciss_submit(struct ctlr_info *h,
hpsa_cmd_resolve_and_free(h, c);
return SCSI_MLQUEUE_HOST_BUSY;
}
+
+ if (dev->in_reset) {
+ hpsa_cmd_resolve_and_free(h, c);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
enqueue_cmd_and_start_io(h, c);
/* the cmd'll come back via intr handler in complete_scsi_command() */
return 0;
@@ -5543,8 +5520,7 @@ static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
}
static int hpsa_ioaccel_submit(struct ctlr_info *h,
- struct CommandList *c, struct scsi_cmnd *cmd,
- unsigned char *scsi3addr)
+ struct CommandList *c, struct scsi_cmnd *cmd)
{
struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
int rc = IO_ACCEL_INELIGIBLE;
@@ -5552,6 +5528,9 @@ static int hpsa_ioaccel_submit(struct ctlr_info *h,
if (!dev)
return SCSI_MLQUEUE_HOST_BUSY;
+ if (dev->in_reset)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
if (hpsa_simple_mode)
return IO_ACCEL_INELIGIBLE;
@@ -5587,8 +5566,12 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
cmd->result = DID_NO_CONNECT << 16;
return hpsa_cmd_free_and_done(c->h, c, cmd);
}
- if (c->reset_pending)
+
+ if (dev->in_reset) {
+ cmd->result = DID_RESET << 16;
return hpsa_cmd_free_and_done(c->h, c, cmd);
+ }
+
if (c->cmd_type == CMD_IOACCEL2) {
struct ctlr_info *h = c->h;
struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
@@ -5596,7 +5579,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
if (c2->error_data.serv_response ==
IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) {
- rc = hpsa_ioaccel_submit(h, c, cmd, dev->scsi3addr);
+ rc = hpsa_ioaccel_submit(h, c, cmd);
if (rc == 0)
return;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
@@ -5612,7 +5595,7 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
}
}
hpsa_cmd_partial_init(c->h, c->cmdindex, c);
- if (hpsa_ciss_submit(c->h, c, cmd, dev->scsi3addr)) {
+ if (hpsa_ciss_submit(c->h, c, cmd, dev)) {
/*
* If we get here, it means dma mapping failed. Try
* again via scsi mid layer, which will then get
@@ -5631,7 +5614,6 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
{
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
- unsigned char scsi3addr[8];
struct CommandList *c;
int rc = 0;
@@ -5653,13 +5635,15 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
return 0;
}
- memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
-
if (unlikely(lockup_detected(h))) {
cmd->result = DID_NO_CONNECT << 16;
cmd->scsi_done(cmd);
return 0;
}
+
+ if (dev->in_reset)
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+
c = cmd_tagged_alloc(h, cmd);
if (c == NULL)
return SCSI_MLQUEUE_DEVICE_BUSY;
@@ -5671,7 +5655,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
if (likely(cmd->retries == 0 &&
!blk_rq_is_passthrough(cmd->request) &&
h->acciopath_status)) {
- rc = hpsa_ioaccel_submit(h, c, cmd, scsi3addr);
+ rc = hpsa_ioaccel_submit(h, c, cmd);
if (rc == 0)
return 0;
if (rc == SCSI_MLQUEUE_HOST_BUSY) {
@@ -5679,7 +5663,7 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
return SCSI_MLQUEUE_HOST_BUSY;
}
}
- return hpsa_ciss_submit(h, c, cmd, scsi3addr);
+ return hpsa_ciss_submit(h, c, cmd, dev);
}
static void hpsa_scan_complete(struct ctlr_info *h)
@@ -5961,6 +5945,7 @@ static int wait_for_device_to_become_ready(struct ctlr_info *h,
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
{
int rc = SUCCESS;
+ int i;
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
u8 reset_type;
@@ -6028,9 +6013,19 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+ /*
+ * wait to see if any commands will complete before sending reset
+ */
+ dev->in_reset = true; /* block any new cmds from OS for this device */
+ for (i = 0; i < 10; i++) {
+ if (atomic_read(&dev->commands_outstanding) > 0)
+ msleep(1000);
+ else
+ break;
+ }
+
/* send a reset to the SCSI LUN which the command was sent to */
- rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type,
- DEFAULT_REPLY_QUEUE);
+ rc = hpsa_do_reset(h, dev, reset_type, DEFAULT_REPLY_QUEUE);
if (rc == 0)
rc = SUCCESS;
else
@@ -6044,6 +6039,8 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
return_reset_status:
spin_lock_irqsave(&h->reset_lock, flags);
h->reset_in_progress = 0;
+ if (dev)
+ dev->in_reset = false;
spin_unlock_irqrestore(&h->reset_lock, flags);
return rc;
}
@@ -6157,6 +6154,7 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
break; /* it's ours now. */
}
hpsa_cmd_partial_init(h, i, c);
+ c->device = NULL;
return c;
}
@@ -6610,8 +6608,7 @@ static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd,
}
}
-static void hpsa_send_host_reset(struct ctlr_info *h, unsigned char *scsi3addr,
- u8 reset_type)
+static void hpsa_send_host_reset(struct ctlr_info *h, u8 reset_type)
{
struct CommandList *c;
@@ -8105,7 +8102,7 @@ static int hpsa_request_irqs(struct ctlr_info *h,
static int hpsa_kdump_soft_reset(struct ctlr_info *h)
{
int rc;
- hpsa_send_host_reset(h, RAID_CTLR_LUNID, HPSA_RESET_TYPE_CONTROLLER);
+ hpsa_send_host_reset(h, HPSA_RESET_TYPE_CONTROLLER);
dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY);