summaryrefslogtreecommitdiff
path: root/drivers/soc/xilinx
diff options
context:
space:
mode:
authorMichael Tretter <m.tretter@pengutronix.de>2021-01-21 10:16:59 +0300
committerStephen Boyd <sboyd@kernel.org>2021-02-09 05:31:25 +0300
commita2fe7baa27a46533005bdf3580ca04f0276c175f (patch)
tree948be117dbddaddd0e7764a91848b6f637d2dcf0 /drivers/soc/xilinx
parentcd0cefa9c96bc0e12aa33d727554bee3fe5f1244 (diff)
downloadlinux-a2fe7baa27a46533005bdf3580ca04f0276c175f.tar.xz
clk: xilinx: move xlnx_vcu clock driver from soc
The xlnx_vcu driver is actually a clock controller driver which provides clocks that can be used by a driver for the encoder/decoder units. There is no reason to keep this driver in soc. Move the driver to clk. NOTE: The register mapping actually contains registers for AXI performance monitoring, but these are not used by the driver. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-16-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Diffstat (limited to 'drivers/soc/xilinx')
-rw-r--r--drivers/soc/xilinx/Kconfig17
-rw-r--r--drivers/soc/xilinx/Makefile1
-rw-r--r--drivers/soc/xilinx/xlnx_vcu.c743
3 files changed, 0 insertions, 761 deletions
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 9fe703772e5a..53af9115dc31 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -1,23 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
menu "Xilinx SoC drivers"
-config XILINX_VCU
- tristate "Xilinx VCU logicoreIP Init"
- depends on HAS_IOMEM && COMMON_CLK
- select REGMAP_MMIO
- help
- Provides the driver to enable and disable the isolation between the
- processing system and programmable logic part by using the logicoreIP
- register set. This driver also configures the frequency based on the
- clock information from the logicoreIP register set.
-
- If you say yes here you get support for the logicoreIP.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called xlnx_vcu.
-
config ZYNQMP_POWER
bool "Enable Xilinx Zynq MPSoC Power Management driver"
depends on PM && ZYNQMP_FIRMWARE
diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
index f66bfea5de17..9854e6f6086b 100644
--- a/drivers/soc/xilinx/Makefile
+++ b/drivers/soc/xilinx/Makefile
@@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_XILINX_VCU) += xlnx_vcu.o
obj-$(CONFIG_ZYNQMP_POWER) += zynqmp_power.o
obj-$(CONFIG_ZYNQMP_PM_DOMAINS) += zynqmp_pm_domains.o
diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c
deleted file mode 100644
index d66b1315114e..000000000000
--- a/drivers/soc/xilinx/xlnx_vcu.c
+++ /dev/null
@@ -1,743 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Xilinx VCU Init
- *
- * Copyright (C) 2016 - 2017 Xilinx, Inc.
- *
- * Contacts Dhaval Shah <dshah@xilinx.com>
- */
-#include <linux/bitfield.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/xlnx-vcu.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#include <dt-bindings/clock/xlnx-vcu.h>
-
-#define VCU_PLL_CTRL 0x24
-#define VCU_PLL_CTRL_RESET BIT(0)
-#define VCU_PLL_CTRL_POR_IN BIT(1)
-#define VCU_PLL_CTRL_PWR_POR BIT(2)
-#define VCU_PLL_CTRL_BYPASS BIT(3)
-#define VCU_PLL_CTRL_FBDIV GENMASK(14, 8)
-#define VCU_PLL_CTRL_CLKOUTDIV GENMASK(18, 16)
-
-#define VCU_PLL_CFG 0x28
-#define VCU_PLL_CFG_RES GENMASK(3, 0)
-#define VCU_PLL_CFG_CP GENMASK(8, 5)
-#define VCU_PLL_CFG_LFHF GENMASK(12, 10)
-#define VCU_PLL_CFG_LOCK_CNT GENMASK(22, 13)
-#define VCU_PLL_CFG_LOCK_DLY GENMASK(31, 25)
-#define VCU_ENC_CORE_CTRL 0x30
-#define VCU_ENC_MCU_CTRL 0x34
-#define VCU_DEC_CORE_CTRL 0x38
-#define VCU_DEC_MCU_CTRL 0x3c
-#define VCU_PLL_STATUS 0x60
-#define VCU_PLL_STATUS_LOCK_STATUS BIT(0)
-
-#define MHZ 1000000
-#define FVCO_MIN (1500U * MHZ)
-#define FVCO_MAX (3000U * MHZ)
-
-/**
- * struct xvcu_device - Xilinx VCU init device structure
- * @dev: Platform device
- * @pll_ref: pll ref clock source
- * @aclk: axi clock source
- * @logicore_reg_ba: logicore reg base address
- * @vcu_slcr_ba: vcu_slcr Register base address
- * @pll: handle for the VCU PLL
- * @pll_post: handle for the VCU PLL post divider
- * @clk_data: clocks provided by the vcu clock provider
- */
-struct xvcu_device {
- struct device *dev;
- struct clk *pll_ref;
- struct clk *aclk;
- struct regmap *logicore_reg_ba;
- void __iomem *vcu_slcr_ba;
- struct clk_hw *pll;
- struct clk_hw *pll_post;
- struct clk_hw_onecell_data *clk_data;
-};
-
-static struct regmap_config vcu_settings_regmap_config = {
- .name = "regmap",
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
- .max_register = 0xfff,
- .cache_type = REGCACHE_NONE,
-};
-
-/**
- * struct xvcu_pll_cfg - Helper data
- * @fbdiv: The integer portion of the feedback divider to the PLL
- * @cp: PLL charge pump control
- * @res: PLL loop filter resistor control
- * @lfhf: PLL loop filter high frequency capacitor control
- * @lock_dly: Lock circuit configuration settings for lock windowsize
- * @lock_cnt: Lock circuit counter setting
- */
-struct xvcu_pll_cfg {
- u32 fbdiv;
- u32 cp;
- u32 res;
- u32 lfhf;
- u32 lock_dly;
- u32 lock_cnt;
-};
-
-static const struct xvcu_pll_cfg xvcu_pll_cfg[] = {
- { 25, 3, 10, 3, 63, 1000 },
- { 26, 3, 10, 3, 63, 1000 },
- { 27, 4, 6, 3, 63, 1000 },
- { 28, 4, 6, 3, 63, 1000 },
- { 29, 4, 6, 3, 63, 1000 },
- { 30, 4, 6, 3, 63, 1000 },
- { 31, 6, 1, 3, 63, 1000 },
- { 32, 6, 1, 3, 63, 1000 },
- { 33, 4, 10, 3, 63, 1000 },
- { 34, 5, 6, 3, 63, 1000 },
- { 35, 5, 6, 3, 63, 1000 },
- { 36, 5, 6, 3, 63, 1000 },
- { 37, 5, 6, 3, 63, 1000 },
- { 38, 5, 6, 3, 63, 975 },
- { 39, 3, 12, 3, 63, 950 },
- { 40, 3, 12, 3, 63, 925 },
- { 41, 3, 12, 3, 63, 900 },
- { 42, 3, 12, 3, 63, 875 },
- { 43, 3, 12, 3, 63, 850 },
- { 44, 3, 12, 3, 63, 850 },
- { 45, 3, 12, 3, 63, 825 },
- { 46, 3, 12, 3, 63, 800 },
- { 47, 3, 12, 3, 63, 775 },
- { 48, 3, 12, 3, 63, 775 },
- { 49, 3, 12, 3, 63, 750 },
- { 50, 3, 12, 3, 63, 750 },
- { 51, 3, 2, 3, 63, 725 },
- { 52, 3, 2, 3, 63, 700 },
- { 53, 3, 2, 3, 63, 700 },
- { 54, 3, 2, 3, 63, 675 },
- { 55, 3, 2, 3, 63, 675 },
- { 56, 3, 2, 3, 63, 650 },
- { 57, 3, 2, 3, 63, 650 },
- { 58, 3, 2, 3, 63, 625 },
- { 59, 3, 2, 3, 63, 625 },
- { 60, 3, 2, 3, 63, 625 },
- { 61, 3, 2, 3, 63, 600 },
- { 62, 3, 2, 3, 63, 600 },
- { 63, 3, 2, 3, 63, 600 },
- { 64, 3, 2, 3, 63, 600 },
- { 65, 3, 2, 3, 63, 600 },
- { 66, 3, 2, 3, 63, 600 },
- { 67, 3, 2, 3, 63, 600 },
- { 68, 3, 2, 3, 63, 600 },
- { 69, 3, 2, 3, 63, 600 },
- { 70, 3, 2, 3, 63, 600 },
- { 71, 3, 2, 3, 63, 600 },
- { 72, 3, 2, 3, 63, 600 },
- { 73, 3, 2, 3, 63, 600 },
- { 74, 3, 2, 3, 63, 600 },
- { 75, 3, 2, 3, 63, 600 },
- { 76, 3, 2, 3, 63, 600 },
- { 77, 3, 2, 3, 63, 600 },
- { 78, 3, 2, 3, 63, 600 },
- { 79, 3, 2, 3, 63, 600 },
- { 80, 3, 2, 3, 63, 600 },
- { 81, 3, 2, 3, 63, 600 },
- { 82, 3, 2, 3, 63, 600 },
- { 83, 4, 2, 3, 63, 600 },
- { 84, 4, 2, 3, 63, 600 },
- { 85, 4, 2, 3, 63, 600 },
- { 86, 4, 2, 3, 63, 600 },
- { 87, 4, 2, 3, 63, 600 },
- { 88, 4, 2, 3, 63, 600 },
- { 89, 4, 2, 3, 63, 600 },
- { 90, 4, 2, 3, 63, 600 },
- { 91, 4, 2, 3, 63, 600 },
- { 92, 4, 2, 3, 63, 600 },
- { 93, 4, 2, 3, 63, 600 },
- { 94, 4, 2, 3, 63, 600 },
- { 95, 4, 2, 3, 63, 600 },
- { 96, 4, 2, 3, 63, 600 },
- { 97, 4, 2, 3, 63, 600 },
- { 98, 4, 2, 3, 63, 600 },
- { 99, 4, 2, 3, 63, 600 },
- { 100, 4, 2, 3, 63, 600 },
- { 101, 4, 2, 3, 63, 600 },
- { 102, 4, 2, 3, 63, 600 },
- { 103, 5, 2, 3, 63, 600 },
- { 104, 5, 2, 3, 63, 600 },
- { 105, 5, 2, 3, 63, 600 },
- { 106, 5, 2, 3, 63, 600 },
- { 107, 3, 4, 3, 63, 600 },
- { 108, 3, 4, 3, 63, 600 },
- { 109, 3, 4, 3, 63, 600 },
- { 110, 3, 4, 3, 63, 600 },
- { 111, 3, 4, 3, 63, 600 },
- { 112, 3, 4, 3, 63, 600 },
- { 113, 3, 4, 3, 63, 600 },
- { 114, 3, 4, 3, 63, 600 },
- { 115, 3, 4, 3, 63, 600 },
- { 116, 3, 4, 3, 63, 600 },
- { 117, 3, 4, 3, 63, 600 },
- { 118, 3, 4, 3, 63, 600 },
- { 119, 3, 4, 3, 63, 600 },
- { 120, 3, 4, 3, 63, 600 },
- { 121, 3, 4, 3, 63, 600 },
- { 122, 3, 4, 3, 63, 600 },
- { 123, 3, 4, 3, 63, 600 },
- { 124, 3, 4, 3, 63, 600 },
- { 125, 3, 4, 3, 63, 600 },
-};
-
-/**
- * xvcu_read - Read from the VCU register space
- * @iomem: vcu reg space base address
- * @offset: vcu reg offset from base
- *
- * Return: Returns 32bit value from VCU register specified
- *
- */
-static inline u32 xvcu_read(void __iomem *iomem, u32 offset)
-{
- return ioread32(iomem + offset);
-}
-
-/**
- * xvcu_write - Write to the VCU register space
- * @iomem: vcu reg space base address
- * @offset: vcu reg offset from base
- * @value: Value to write
- */
-static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value)
-{
- iowrite32(value, iomem + offset);
-}
-
-#define to_vcu_pll(_hw) container_of(_hw, struct vcu_pll, hw)
-
-struct vcu_pll {
- struct clk_hw hw;
- void __iomem *reg_base;
- unsigned long fvco_min;
- unsigned long fvco_max;
-};
-
-static int xvcu_pll_wait_for_lock(struct vcu_pll *pll)
-{
- void __iomem *base = pll->reg_base;
- unsigned long timeout;
- u32 lock_status;
-
- timeout = jiffies + msecs_to_jiffies(2000);
- do {
- lock_status = xvcu_read(base, VCU_PLL_STATUS);
- if (lock_status & VCU_PLL_STATUS_LOCK_STATUS)
- return 0;
- } while (!time_after(jiffies, timeout));
-
- return -ETIMEDOUT;
-}
-
-static struct clk_hw *xvcu_register_pll_post(struct device *dev,
- const char *name,
- const struct clk_hw *parent_hw,
- void __iomem *reg_base)
-{
- u32 div;
- u32 vcu_pll_ctrl;
-
- /*
- * The output divider of the PLL must be set to 1/2 to meet the
- * timing in the design.
- */
- vcu_pll_ctrl = xvcu_read(reg_base, VCU_PLL_CTRL);
- div = FIELD_GET(VCU_PLL_CTRL_CLKOUTDIV, vcu_pll_ctrl);
- if (div != 1)
- return ERR_PTR(-EINVAL);
-
- return clk_hw_register_fixed_factor(dev, "vcu_pll_post",
- clk_hw_get_name(parent_hw),
- CLK_SET_RATE_PARENT, 1, 2);
-}
-
-static const struct xvcu_pll_cfg *xvcu_find_cfg(int div)
-{
- const struct xvcu_pll_cfg *cfg = NULL;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(xvcu_pll_cfg) - 1; i++)
- if (xvcu_pll_cfg[i].fbdiv == div)
- cfg = &xvcu_pll_cfg[i];
-
- return cfg;
-}
-
-static int xvcu_pll_set_div(struct vcu_pll *pll, int div)
-{
- void __iomem *base = pll->reg_base;
- const struct xvcu_pll_cfg *cfg = NULL;
- u32 vcu_pll_ctrl;
- u32 cfg_val;
-
- cfg = xvcu_find_cfg(div);
- if (!cfg)
- return -EINVAL;
-
- vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl &= ~VCU_PLL_CTRL_FBDIV;
- vcu_pll_ctrl |= FIELD_PREP(VCU_PLL_CTRL_FBDIV, cfg->fbdiv);
- xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
-
- cfg_val = FIELD_PREP(VCU_PLL_CFG_RES, cfg->res) |
- FIELD_PREP(VCU_PLL_CFG_CP, cfg->cp) |
- FIELD_PREP(VCU_PLL_CFG_LFHF, cfg->lfhf) |
- FIELD_PREP(VCU_PLL_CFG_LOCK_CNT, cfg->lock_cnt) |
- FIELD_PREP(VCU_PLL_CFG_LOCK_DLY, cfg->lock_dly);
- xvcu_write(base, VCU_PLL_CFG, cfg_val);
-
- return 0;
-}
-
-static long xvcu_pll_round_rate(struct clk_hw *hw,
- unsigned long rate, unsigned long *parent_rate)
-{
- struct vcu_pll *pll = to_vcu_pll(hw);
- unsigned int feedback_div;
-
- rate = clamp_t(unsigned long, rate, pll->fvco_min, pll->fvco_max);
-
- feedback_div = DIV_ROUND_CLOSEST_ULL(rate, *parent_rate);
- feedback_div = clamp_t(unsigned int, feedback_div, 25, 125);
-
- return *parent_rate * feedback_div;
-}
-
-static unsigned long xvcu_pll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct vcu_pll *pll = to_vcu_pll(hw);
- void __iomem *base = pll->reg_base;
- unsigned int div;
- u32 vcu_pll_ctrl;
-
- vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- div = FIELD_GET(VCU_PLL_CTRL_FBDIV, vcu_pll_ctrl);
-
- return div * parent_rate;
-}
-
-static int xvcu_pll_set_rate(struct clk_hw *hw,
- unsigned long rate, unsigned long parent_rate)
-{
- struct vcu_pll *pll = to_vcu_pll(hw);
-
- return xvcu_pll_set_div(pll, rate / parent_rate);
-}
-
-static int xvcu_pll_enable(struct clk_hw *hw)
-{
- struct vcu_pll *pll = to_vcu_pll(hw);
- void __iomem *base = pll->reg_base;
- u32 vcu_pll_ctrl;
- int ret;
-
- vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl |= VCU_PLL_CTRL_BYPASS;
- xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
-
- vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl &= ~VCU_PLL_CTRL_POR_IN;
- vcu_pll_ctrl &= ~VCU_PLL_CTRL_PWR_POR;
- vcu_pll_ctrl &= ~VCU_PLL_CTRL_RESET;
- xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
-
- ret = xvcu_pll_wait_for_lock(pll);
- if (ret) {
- pr_err("VCU PLL is not locked\n");
- goto err;
- }
-
- vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl &= ~VCU_PLL_CTRL_BYPASS;
- xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
-
-err:
- return ret;
-}
-
-static void xvcu_pll_disable(struct clk_hw *hw)
-{
- struct vcu_pll *pll = to_vcu_pll(hw);
- void __iomem *base = pll->reg_base;
- u32 vcu_pll_ctrl;
-
- vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
- vcu_pll_ctrl |= VCU_PLL_CTRL_POR_IN;
- vcu_pll_ctrl |= VCU_PLL_CTRL_PWR_POR;
- vcu_pll_ctrl |= VCU_PLL_CTRL_RESET;
- xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
-}
-
-static const struct clk_ops vcu_pll_ops = {
- .enable = xvcu_pll_enable,
- .disable = xvcu_pll_disable,
- .round_rate = xvcu_pll_round_rate,
- .recalc_rate = xvcu_pll_recalc_rate,
- .set_rate = xvcu_pll_set_rate,
-};
-
-static struct clk_hw *xvcu_register_pll(struct device *dev,
- void __iomem *reg_base,
- const char *name, const char *parent,
- unsigned long flags)
-{
- struct vcu_pll *pll;
- struct clk_hw *hw;
- struct clk_init_data init;
- int ret;
-
- init.name = name;
- init.parent_names = &parent;
- init.ops = &vcu_pll_ops;
- init.num_parents = 1;
- init.flags = flags;
-
- pll = devm_kmalloc(dev, sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
-
- pll->hw.init = &init;
- pll->reg_base = reg_base;
- pll->fvco_min = FVCO_MIN;
- pll->fvco_max = FVCO_MAX;
-
- hw = &pll->hw;
- ret = devm_clk_hw_register(dev, hw);
- if (ret)
- return ERR_PTR(ret);
-
- clk_hw_set_rate_range(hw, pll->fvco_min, pll->fvco_max);
-
- return hw;
-}
-
-static struct clk_hw *xvcu_clk_hw_register_leaf(struct device *dev,
- const char *name,
- const struct clk_parent_data *parent_data,
- u8 num_parents,
- void __iomem *reg)
-{
- u8 mux_flags = CLK_MUX_ROUND_CLOSEST;
- u8 divider_flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO |
- CLK_DIVIDER_ROUND_CLOSEST;
- struct clk_hw *mux = NULL;
- struct clk_hw *divider = NULL;
- struct clk_hw *gate = NULL;
- char *name_mux;
- char *name_div;
- int err;
- /* Protect register shared by clocks */
- spinlock_t *lock;
-
- lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
- if (!lock)
- return ERR_PTR(-ENOMEM);
- spin_lock_init(lock);
-
- name_mux = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_mux");
- if (!name_mux)
- return ERR_PTR(-ENOMEM);
- mux = clk_hw_register_mux_parent_data(dev, name_mux,
- parent_data, num_parents,
- CLK_SET_RATE_PARENT,
- reg, 0, 1, mux_flags, lock);
- if (IS_ERR(mux))
- return mux;
-
- name_div = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_div");
- if (!name_div) {
- err = -ENOMEM;
- goto unregister_mux;
- }
- divider = clk_hw_register_divider_parent_hw(dev, name_div, mux,
- CLK_SET_RATE_PARENT,
- reg, 4, 6, divider_flags,
- lock);
- if (IS_ERR(divider)) {
- err = PTR_ERR(divider);
- goto unregister_mux;
- }
-
- gate = clk_hw_register_gate_parent_hw(dev, name, divider,
- CLK_SET_RATE_PARENT, reg, 12, 0,
- lock);
- if (IS_ERR(gate)) {
- err = PTR_ERR(gate);
- goto unregister_divider;
- }
-
- return gate;
-
-unregister_divider:
- clk_hw_unregister_divider(divider);
-unregister_mux:
- clk_hw_unregister_mux(mux);
-
- return ERR_PTR(err);
-}
-
-static void xvcu_clk_hw_unregister_leaf(struct clk_hw *hw)
-{
- struct clk_hw *gate = hw;
- struct clk_hw *divider;
- struct clk_hw *mux;
-
- if (!gate)
- return;
-
- divider = clk_hw_get_parent(gate);
- clk_hw_unregister_gate(gate);
- if (!divider)
- return;
-
- mux = clk_hw_get_parent(divider);
- clk_hw_unregister_mux(mux);
- if (!divider)
- return;
-
- clk_hw_unregister_divider(divider);
-}
-
-static int xvcu_register_clock_provider(struct xvcu_device *xvcu)
-{
- struct device *dev = xvcu->dev;
- struct clk_parent_data parent_data[2] = { 0 };
- struct clk_hw_onecell_data *data;
- struct clk_hw **hws;
- struct clk_hw *hw;
- void __iomem *reg_base = xvcu->vcu_slcr_ba;
-
- data = devm_kzalloc(dev, struct_size(data, hws, CLK_XVCU_NUM_CLOCKS), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- data->num = CLK_XVCU_NUM_CLOCKS;
- hws = data->hws;
-
- xvcu->clk_data = data;
-
- hw = xvcu_register_pll(dev, reg_base,
- "vcu_pll", __clk_get_name(xvcu->pll_ref),
- CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
- xvcu->pll = hw;
-
- hw = xvcu_register_pll_post(dev, "vcu_pll_post", xvcu->pll, reg_base);
- if (IS_ERR(hw))
- return PTR_ERR(hw);
- xvcu->pll_post = hw;
-
- parent_data[0].fw_name = "pll_ref";
- parent_data[1].hw = xvcu->pll_post;
-
- hws[CLK_XVCU_ENC_CORE] =
- xvcu_clk_hw_register_leaf(dev, "venc_core_clk",
- parent_data,
- ARRAY_SIZE(parent_data),
- reg_base + VCU_ENC_CORE_CTRL);
- hws[CLK_XVCU_ENC_MCU] =
- xvcu_clk_hw_register_leaf(dev, "venc_mcu_clk",
- parent_data,
- ARRAY_SIZE(parent_data),
- reg_base + VCU_ENC_MCU_CTRL);
- hws[CLK_XVCU_DEC_CORE] =
- xvcu_clk_hw_register_leaf(dev, "vdec_core_clk",
- parent_data,
- ARRAY_SIZE(parent_data),
- reg_base + VCU_DEC_CORE_CTRL);
- hws[CLK_XVCU_DEC_MCU] =
- xvcu_clk_hw_register_leaf(dev, "vdec_mcu_clk",
- parent_data,
- ARRAY_SIZE(parent_data),
- reg_base + VCU_DEC_MCU_CTRL);
-
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data);
-}
-
-static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu)
-{
- struct clk_hw_onecell_data *data = xvcu->clk_data;
- struct clk_hw **hws = data->hws;
-
- if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_MCU]))
- xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_MCU]);
- if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_CORE]))
- xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_CORE]);
- if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_MCU]))
- xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_MCU]);
- if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_CORE]))
- xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_CORE]);
-
- clk_hw_unregister_fixed_factor(xvcu->pll_post);
-}
-
-/**
- * xvcu_probe - Probe existence of the logicoreIP
- * and initialize PLL
- *
- * @pdev: Pointer to the platform_device structure
- *
- * Return: Returns 0 on success
- * Negative error code otherwise
- */
-static int xvcu_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct xvcu_device *xvcu;
- void __iomem *regs;
- int ret;
-
- xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL);
- if (!xvcu)
- return -ENOMEM;
-
- xvcu->dev = &pdev->dev;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr");
- if (!res) {
- dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n");
- return -ENODEV;
- }
-
- xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!xvcu->vcu_slcr_ba) {
- dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n");
- return -ENOMEM;
- }
-
- xvcu->logicore_reg_ba =
- syscon_regmap_lookup_by_compatible("xlnx,vcu-settings");
- if (IS_ERR(xvcu->logicore_reg_ba)) {
- dev_info(&pdev->dev,
- "could not find xlnx,vcu-settings: trying direct register access\n");
-
- res = platform_get_resource_byname(pdev,
- IORESOURCE_MEM, "logicore");
- if (!res) {
- dev_err(&pdev->dev, "get logicore memory resource failed.\n");
- return -ENODEV;
- }
-
- regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!regs) {
- dev_err(&pdev->dev, "logicore register mapping failed.\n");
- return -ENOMEM;
- }
-
- xvcu->logicore_reg_ba =
- devm_regmap_init_mmio(&pdev->dev, regs,
- &vcu_settings_regmap_config);
- if (IS_ERR(xvcu->logicore_reg_ba)) {
- dev_err(&pdev->dev, "failed to init regmap\n");
- return PTR_ERR(xvcu->logicore_reg_ba);
- }
- }
-
- xvcu->aclk = devm_clk_get(&pdev->dev, "aclk");
- if (IS_ERR(xvcu->aclk)) {
- dev_err(&pdev->dev, "Could not get aclk clock\n");
- return PTR_ERR(xvcu->aclk);
- }
-
- xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
- if (IS_ERR(xvcu->pll_ref)) {
- dev_err(&pdev->dev, "Could not get pll_ref clock\n");
- return PTR_ERR(xvcu->pll_ref);
- }
-
- ret = clk_prepare_enable(xvcu->aclk);
- if (ret) {
- dev_err(&pdev->dev, "aclk clock enable failed\n");
- return ret;
- }
-
- /*
- * Do the Gasket isolation and put the VCU out of reset
- * Bit 0 : Gasket isolation
- * Bit 1 : put VCU out of reset
- */
- regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE);
-
- ret = xvcu_register_clock_provider(xvcu);
- if (ret) {
- dev_err(&pdev->dev, "failed to register clock provider\n");
- goto error_clk_provider;
- }
-
- dev_set_drvdata(&pdev->dev, xvcu);
-
- return 0;
-
-error_clk_provider:
- xvcu_unregister_clock_provider(xvcu);
- clk_disable_unprepare(xvcu->aclk);
- return ret;
-}
-
-/**
- * xvcu_remove - Insert gasket isolation
- * and disable the clock
- * @pdev: Pointer to the platform_device structure
- *
- * Return: Returns 0 on success
- * Negative error code otherwise
- */
-static int xvcu_remove(struct platform_device *pdev)
-{
- struct xvcu_device *xvcu;
-
- xvcu = platform_get_drvdata(pdev);
- if (!xvcu)
- return -ENODEV;
-
- xvcu_unregister_clock_provider(xvcu);
-
- /* Add the Gasket isolation and put the VCU in reset. */
- regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
-
- clk_disable_unprepare(xvcu->aclk);
-
- return 0;
-}
-
-static const struct of_device_id xvcu_of_id_table[] = {
- { .compatible = "xlnx,vcu" },
- { .compatible = "xlnx,vcu-logicoreip-1.0" },
- { }
-};
-MODULE_DEVICE_TABLE(of, xvcu_of_id_table);
-
-static struct platform_driver xvcu_driver = {
- .driver = {
- .name = "xilinx-vcu",
- .of_match_table = xvcu_of_id_table,
- },
- .probe = xvcu_probe,
- .remove = xvcu_remove,
-};
-
-module_platform_driver(xvcu_driver);
-
-MODULE_AUTHOR("Dhaval Shah <dshah@xilinx.com>");
-MODULE_DESCRIPTION("Xilinx VCU init Driver");
-MODULE_LICENSE("GPL v2");